Texas Instruments

LM2903M/NOPB - Dual Open-Collector Comparator | Texas Instruments

MPN: LM2903M/NOPB ✓ 啟用中
2 mV Vdss 2 nA and 5 nA Id SOIC (D), 8 pins Package
MOQ: 1 |

LM2903M/NOPB 概覽

The Texas Instruments LM2903M/NOPB is a dual differential analog comparator with two independent channels, low offset voltage, and open-collector outputs in an 8-pin SOIC package. According to the manufacturer product information, the device supports a single-supply operating range extending to 18 V and an operating temperature range of -40°C to 85°C. Its maximum input offset voltage is specified as low as 2 mV, while input current values of 2 nA and 5 nA appear in the product listing.

An analog comparator is a signal-conditioning semiconductor that compares two input voltages and changes its output state when one input exceeds the other. The LM2903 belongs to the comparator hierarchy within analog and mixed-signal semiconductors. A differential comparator can operate from a single supply or split supply, allowing it to compare signals near ground, bipolar signals, or thresholds referenced to a supply rail.

The LM2903M/NOPB provides two independent low-power, low-offset comparators in one package. Its open-collector outputs are designed for wired-interface use and require an external pull-up resistor to establish a positive logic high when the output transistor is off. The listed propagation delay is 1.5 microseconds, making the device suitable for threshold detection, level translation, relay or solenoid driving, and general industrial control functions where microsecond-scale decision speed is sufficient.

A broad supply range is useful in equipment operating from industrial or automotive-style voltage rails. The -40°C to 85°C temperature range supports industrial and extended-temperature environments, although the specific LM2903M/NOPB orderable status and quality qualification should be checked for each deployment. The 8-pin SOIC package is a standard surface-mount footprint that is larger than contemporary compact packages but remains convenient for hand assembly, prototyping, and through-hole-style external pull-up routing.

Typical uses include monitoring a sensor against an adjustable threshold, detecting overvoltage or undervoltage conditions, converting an analog level into a logic event, and providing two independent comparisons in control, instrumentation, or power-supply systems. Because the outputs are open collector, multiple devices or nodes can share a pull-up arrangement when the electrical conditions permit.

Designers should account for input common-mode range, output pull-up requirements, supply decoupling, and the effect of input bias current when selecting threshold resistors. Keep comparator inputs away from switching-node currents and provide a stable local ground reference. The open-collector nodes should have pull-up resistors selected for the required logic voltage, sink-current budget, rise-time target, and system power budget.

This page combines the manufacturer's ordering information, a source-grounded parameter summary, application engineering guidance, and package-level replacement analysis. It also identifies the design trade-offs that matter when comparing the LM2903M/NOPB with related dual comparators rather than relying only on basic device descriptions.

直接替換替代品,適用於 LM2903M/NOPB — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: LM2903M/NOPB (相同外形與佔位) — 差異在於 Package, Propagation Delay, Operating Temperature Range, Output Type, Comparator Type.

Texas Instruments
Package: 8-pin SOIC (D)
Propagation Delay: 1 µs
Operating Temperature Range: -40 °C to +125 °C
Texas Instruments
Package: 8-pin SOIC
Propagation Delay: 300 ns response time
Operating Temperature Range: -40 °C to +125 °C
onsemi
Package: 8-SOIC
Propagation Delay: 1.5 µs
Operating Temperature Range: -40 °C to +105 °C
onsemi
Package: 8-SOIC (SO-8, surface mount)
Output Type: Open-collector
Texas Instruments
Package: 8-pin SOIC
Propagation Delay: 1.5 microseconds
Operating Temperature Range: -40 C to +85 C
Texas Instruments
Package: 8-pin SOIC
Output Type: Open-collector
Comparator Type: Dual differential voltage comparator
Texas Instruments
Package: 8-pin SOIC
Output Type: Open-collector
Texas Instruments
Package: 8-pin SOIC (D)
Output Type: Open-collector
Texas Instruments
Package: 8-Pin PDIP (DIP-8, N suffix)
Operating Temperature Range: -40 C to +125 C
Output Type: Open-Collector / Open-Drain
Texas Instruments
Package: 8-pin TSSOP (PW), 0.173 inch width
Propagation Delay: 1.3 us
Operating Temperature Range: -40 C to +125 C
onsemi
Package: 8-pin SOIC
Operating Temperature Range: -40 °C to +125 °C
Output Type: Open-collector

LM2903M

✅ 直接替換
Texas Instruments
📦 8-pin SOIC
Dual differential comparator · 2 · 2 V to 36 V · Open-collector · Rail-to-rail · 1.5 microseconds · 1 mA · CMOS, DTL, ECL, MOS, TTL

聯絡詢價

查看資料表 →

LM2903D

✅ 直接替換
Texas Instruments
📦 8-pin SOIC
Dual differential comparator · 2 channels · 2 V to 36 V · Open-collector · 300 ns · 8-pin SOIC · Surface mount · -40 °C to +125 °C

聯絡詢價

查看資料表 →

LM2903N

✅ 直接替換
Texas Instruments
📦 8-pin SOIC
Low Offset Voltage, Dual Differential · 2 (dual independent) · Open-Collector / Open-Drain · 2 V to 36 V · ±1 V to ±18 V · 2.5 mV (LM2903 grade) · 25 nA · Includes ground (negative rail)

聯絡詢價

查看資料表 →

LM2903M

✅ 直接替換
Texas Instruments
📦 8-pin SOIC
Dual differential comparator · 2 · 2 V to 36 V · Open-collector · Rail-to-rail · 1.5 microseconds · 1 mA · CMOS, DTL, ECL, MOS, TTL

聯絡詢價

查看資料表 →

LM2903BIDR

✅ 直接替換
Texas Instruments
📦 8-pin SOIC
Dual differential comparator · 2 channels · Open-collector · 36 V · 2 V · 0.37 mV · 3.5 nA · 200 µA per comparator

聯絡詢價

查看資料表 →

LM2903M/NOPB 最大額定值與電氣特性

Comparator Type Dual differential comparator
Number of Channels 2 channels
Channel Independence 2 independent comparators
輸出類型 Open collector
Maximum Input Offset Voltage 2 mV
Input Current 2 nA and 5 nA
Propagation Delay 1.5 us
Supply Voltage Range Up to 18 V
Single-Supply Operation Supported
Split-Supply Operation Supported
Common-Mode Operation Includes a common-mode range to ground for single-supply operation
工作溫度範圍 -40°C to 85°C
封裝 SOIC (D), 8 pins
安裝類型 Surface mount
Product Description Low-offset, dual differential comparator

LM2903M/NOPB soic (d), 8 pins 腳位配置指南

LM2903M/NOPB(soic (d), 8 pins 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

LM2903M/NOPB 的 soic (d), 8 pins 封裝腳位圖

無詳細腳位定義資料: LM2903M/NOPB.

請參閱 資料表 以查看完整腳位配置。

典型應用

LM2903M/NOPB 適用於 6 應用s: Industrial Threshold Detection, Power-Supply Overvoltage Detection, Automotive Sensor Interface, Relay and Solenoid Control, Battery Voltage Monitoring, Instrumentation and Test Equipment.

🏭

Industrial Threshold Detection

The LM2903M/NOPB is suitable for comparing a sensor signal with an adjustable threshold in industrial monitoring equipment. Its maximum input offset voltage of 2 mV helps limit the switching boundary error, while the two independent channels allow one device to monitor two related conditions. Each comparator can drive an open-collector node with a pull-up resistor, providing a simple fail-safe digital event signal. The 1.5-microsecond listed propagation delay is adequate for temperature, level, or process-limit monitoring rather than high-speed timing. In implementation, place the divider and input traces away from motors and switching power nodes, reference both channels to a low-impedance ground plane, and select resistor values that account for input bias current as well as threshold tolerance.

⚡

Power-Supply Overvoltage Detection

The LM2903M/NOPB can monitor a divided power-supply rail and produce an open-collector fault signal when the voltage crosses a defined limit. The comparator supports supply operation extending to 18 V and includes a common-mode range to ground for single-supply configurations, making it relevant to industrial and automotive-style control circuits. Two channels can supervise positive and auxiliary rails independently. The external pull-up can be connected to the system logic supply, while the open-drain output provides wired fault signaling when suitable for the bus architecture. Designers should verify the exact common-mode limits and output sink current, use precision divider resistors, and prevent comparator input current from shifting the threshold significantly.

🚗

Automotive Sensor Interface

The LM2903M/NOPB can convert a sensor or diagnostic signal into a logic event when used within an automotive control module. Its -40°C to 85°C operating range and low-offset dual-comparator architecture suit threshold-based sensing, while the two channels provide independent monitoring functions in one 8-pin package. An open-collector output can be pulled up to the module's logic rail, simplifying interface with discrete logic or another open-collector device. The 1.5-microsecond propagation delay is suitable for slow vehicle signals, not high-speed sensor timing. For production use, confirm AEC-Q100 qualification for the selected orderable, protect input and output paths against automotive transients, and route sensitive comparator inputs away from ignition and motor-control switching nodes.

🔧

Relay and Solenoid Control

The LM2903M/NOPB can decide when to energize a relay, solenoid, or latching actuator by comparing a control voltage against a threshold. The open-collector output works naturally with an NPN driver transistor or other compatible interface stage, while the 2 mV maximum input offset supports relatively precise activation boundaries. Two comparator channels can monitor command and feedback conditions independently. Because the 1.5-microsecond response is much faster than most electromechanical actuator delays, it is adequate for normal switching. Include a suitable flyback diode for inductive loads, check the comparator's output sink rating, add hysteresis to prevent relay chatter, and keep high-current actuator return paths separate from the comparator ground reference.

📱

Battery Voltage Monitoring

The LM2903M/NOPB is appropriate for monitoring a divided battery or portable-system voltage and generating an open-collector warning when the level crosses a threshold. Its low-power dual-comparator format permits two limits from one package, such as undervoltage and overvoltage indications, while the input common-mode capability near ground supports single-supply operation. The listed 1.5-microsecond propagation delay is negligible for battery monitoring. In portable equipment, the pull-up resistor should be selected to minimize standing current while maintaining an acceptable rise time at the input of the monitoring logic. Also account for comparator input bias current when selecting high-value dividers, protect the input against battery transients, and verify the complete operating-voltage range for the selected LM2903 orderable.

🖥️

Instrumentation and Test Equipment

The LM2903M/NOPB can perform a basic limit decision in measurement and test equipment where a source, reference, or feedback voltage must be compared with an adjustable limit. Two independent channels reduce the number of comparator packages needed when testing upper and lower bounds. The maximum input offset voltage of 2 mV supports fine boundary selection, while open-collector outputs can drive rear-panel relay logic, status indicators, or a host interface through pull-ups. The 1.5-microsecond response is suitable for slow process-control and calibration functions but not precision waveform analysis. Use a low-noise reference, maintain a consistent ground reference across the analog and digital sections, and place input components close to the comparator to minimize noise pickup during precision measurements.

What is the LM2903M/NOPB?
The LM2903M/NOPB is a Texas Instruments dual differential comparator with two independent channels and open-collector outputs in an 8-pin SOIC package. According to the Texas Instruments LM2903 product information, it is a low-offset comparator designed for single-supply operation over a wide voltage range, with a maximum input offset voltage specified as low as 2 mV and a listed propagation delay of 1.5 microseconds.
What are the key specifications of LM2903M/NOPB that engineers should know?
The LM2903M/NOPB combines two independent differential comparator channels, open-collector outputs, a maximum input offset voltage of 2 mV, input currents of 2 nA and 5 nA, and a 1.5-microsecond propagation delay. According to the Texas Instruments LM2903 product information, the exact device is offered in an 8-pin SOIC package with an operating temperature range of -40°C to 85°C and supply capability extending to 18 V.
Where can I download the LM2903M datasheet PDF?
The official Texas Instruments LM2903 product page is the appropriate place to obtain the current LM2903M/NOPB datasheet PDF and supporting ordering information. The manufacturer page identifies LM2903M/NOPB as an active 8-pin SOIC device rated from -40°C to 85°C. Use the manufacturer document for the complete pin-description table, absolute maximum ratings, electrical characteristics, and application guidance.
Where can I find the LM2903M/NOPB pinout?
The LM2903M/NOPB pinout is documented in the pin-configuration section of the Texas Instruments LM2903 family datasheet. The verified orderable is specified in an 8-pin SOIC package. Assign PCB tracks using the numbered package drawing and pin-description table in the manufacturer datasheet, because exposed-pad and package-style suffixes can change mechanical drawings even when the circuit function remains similar.
Does the LM2903M/NOPB need pull-up resistors?
Yes, the LM2903M/NOPB open-collector outputs require an external pull-up resistor to establish a positive high output voltage. According to the Texas Instruments LM2903 product information, the device uses open-collector outputs and supports a common-mode range to ground in single-supply operation. Select the pull-up voltage, resistance, and allowable sink current to match the receiving logic and required output rise time.
Can LM2903M/NOPB operate from a single supply?
The LM2903M/NOPB can operate from a single supply, including applications where the input range must extend near ground. According to the Texas Instruments LM2903 family information, the comparator family supports single-supply and split-supply operation. The common-mode range remains a key layout and selection constraint because the valid input range depends on the supply configuration.
What is the LM2903M/NOPB input offset voltage?
The LM2903M/NOPB has a maximum input offset voltage specified as low as 2 mV. According to the Texas Instruments LM2903 product information, this low-offset characteristic supports more accurate threshold decisions than a generic comparator with a broader offset tolerance. For precision applications, evaluate the complete electrical-characteristics table and account for temperature, input bias current, and resistor tolerances.
How fast is the LM2903M/NOPB comparator?
The LM2903M/NOPB has a listed propagation delay of 1.5 microseconds. According to the Texas Instruments LM2903 product information, this response time is suitable for threshold monitoring, relay-control logic, and general industrial decision circuits. It is not positioned for high-speed pulse qualification, so applications requiring sub-microsecond decisions should use a faster comparator family.
Is LM2903M/NOPB suitable for automotive applications?
The LM2903M/NOPB is specified for -40°C to 85°C operation and is described by Texas Instruments as suitable for consumer automotive applications within the wider LM2903 family. However, the exact orderable must be checked for the required automotive qualification and traceability. According to the manufacturer product information, the standard M/NOPB ordering information does not by itself establish AEC-Q100 qualification.
Where can I buy LM2903M/NOPB online?
Use the Request a Quote form on this page to request LM2903M/NOPB availability, current unit pricing, quantity breaks, and lead time for the exact Texas Instruments orderable and 8-pin SOIC package. Commercial terms can change with inventory and order quantity, so request a written quotation rather than relying on an archived or memory-derived price. The exact MPN and suffix should be stated on the request.
What is the price of LM2903M/NOPB?
Current pricing for LM2903M/NOPB should be obtained through the Request a Quote form on this page. The platform maintains the commercial price separately because distributor pricing and stock can change after publication. Request the quantity needed, packaging preference, and target delivery region so the quote can be prepared for the exact 8-pin SOIC orderable rather than a related LM2903 variant.
What is the lead time for LM2903M/NOPB?
The current lead time for LM2903M/NOPB should be requested through the Request a Quote form on this page. Lead time depends on order quantity, the selected package variant, manufacturing availability, and destination. Because the manufacturer lists the exact device as active, a quotation request is the appropriate way to confirm scheduling and the earliest available delivery quantity.
Is LM2903M/NOPB in stock?
Use the Request a Quote form on this page to check current LM2903M/NOPB stock and allocation for the exact orderable. Availability can change quickly and may differ by quantity and shipment region. Specify your required quantity, date code requirements, and acceptable packaging configuration when requesting stock confirmation.
What can replace LM2903M/NOPB?
A suitable LM2903M/NOPB replacement must use the same 8-pin SOIC footprint, preserve the open-collector output arrangement, and meet the circuit's voltage, common-mode, offset, and timing requirements. Related LM2903M, LM2903D, and onsemi LM2903-family devices may provide candidate functions, but each requires pin-by-pin and specification review. Use the manufacturer cross-reference information and the device datasheet before approving a substitution.
Is LM2903M the same as LM2903M/NOPB?
LM2903M and LM2903M/NOPB identify closely related Texas Instruments orderable entries for the LM2903 family, but suffix and packaging details must be checked before interchange. The verified orderable LM2903M/NOPB is an 8-pin SOIC device rated from -40°C to 85°C. Confirm the exact order code, pin configuration, reel or tube format, and current status in the manufacturer ordering information before treating them as interchangeable.
When should I choose LM2903M/NOPB instead of a faster comparator?
Choose the LM2903M/NOPB when the application needs two low-offset, low-power differential comparisons and can tolerate a listed propagation delay of 1.5 microseconds. According to the Texas Instruments LM2903 product information, its open-collector outputs suit pull-up-based logic interfaces. Choose a faster comparator instead when edge timing, propagation-delay variation, or high-frequency signal qualification requires substantially shorter response times.

工程參考資料,適用於 LM2903M/NOPB — 比較、設計指引及合規資訊。

選型指南

Choose LM2903M/NOPB when the design needs two independent low-offset comparisons, open-collector outputs, operation from a single supply near ground, and an 8-pin SOIC footprint. It is a practical fit for industrial threshold detection, supply supervision, relay control, battery monitoring, and slow automotive sensor interfaces where a listed 1.5-microsecond response is adequate. The related LM2903M and LM2903D can be considered when a Texas Instruments ordering or packaging variant is preferred, provided the exact suffix, qualification, and shipment form are confirmed. The onsemi LM2903N and LM2903M are cross-brand candidates because their family descriptions align with the target's dual-comparator, 2 mV-offset, and 8-pin SOIC characteristics; they should be approved only after checking output type, pin names, common-mode limits, timing, and operating-temperature ratings against the target circuit. Use a faster, rail-to-rail-input comparator when the compared signals can exceed the LM2903 common-mode range or when sub-microsecond response is essential.

與替代品比較

參數 本產品 LM2903M LM2903D LM2903N LM2903M LM2903BIDR
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments onsemi onsemi Texas Instruments
Comparator Configuration Dual differential comparator Dual differential comparator Dual differential comparator Dual differential comparator Dual differential comparator Dual differential comparator
Number of Independent Channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Single-Supply Operation Supported Supported Supported Supported Supported Supported

主要差異化特點

  • Low-offset threshold decision in two channels (對比LM2903N)
  • Open-collector interface suited to pull-up logic (對比LM2903BIDR)
  • Two independent comparisons in one 8-pin package (對比LM2903D)
  • Adequate speed for control and protection functions (對比LM2903M)

設計說明

Do not treat an open-collector output as a push-pull logic output. Add a pull-up resistor to the required positive logic rail, and size it from the receiver's input current, the comparator's sink-current limit, and the desired rising-edge time. If the node must drive a cable or long PCB trace, account for distributed capacitance because a large pull-up can produce a slow edge and a small pull-up can exceed the output sink rating.

Route the non-inverting and inverting inputs as a compact differential pair and keep them away from switching-node copper, inductors, high-current relay returns, and the open-collector output trace. Connect the comparator ground reference directly to the quiet analog-ground region. For stable threshold decisions, place the input divider and any hysteresis feedback components close to the device and use a low-impedance reference return.

Add deliberate hysteresis when the compared signals can cross slowly or contain noise; otherwise the comparator can repeatedly change state near the threshold. The listed 2 mV maximum input offset establishes a useful accuracy boundary but does not eliminate resistor tolerance, input-bias error, temperature drift, or noise. Evaluate those effects with the actual divider values and include them when setting the guaranteed switching threshold.

Place the device supply bypass capacitor close to the supply and ground pins, with a short and low-impedance return path. Decouple noisy loads rather than relying on the comparator's own supply pin to absorb their transients. If one package controls a relay and another channel monitors a sensitive reference, keep the relay-driver return current out of the comparator reference path to prevent ground bounce from shifting the decision point.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The manufacturer product page identifies the exact LM2903M/NOPB orderable as active, but the verified content does not explicitly state its RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

相關搜尋

lm2903m nopb lm2903m datasheet lm2903m datasheet pdf lm2903m pdf LM2903M/NOPB datasheet PDF LM2903M/NOPB pinout LM2903M/NOPB replacement LM2903M/NOPB equivalent LM2903M/NOPB vs LM2903D LM2903M/NOPB open collector comparator LM2903M/NOPB 8-SOIC LM2903M/NOPB price LM2903M/NOPB stock Texas Instruments LM2903M/NOPB

相關元件與詞彙

Texas Instruments LM2903M/NOPB LM2903M LM2903D LM2903N LM2903BIDR onsemi dual differential comparator analog comparator comparator IC analog signal-conditioning IC semiconductor open-collector output input offset voltage input bias current common-mode voltage range propagation delay single-supply operation split-supply operation SOIC-8 surface-mount package industrial threshold detection power-supply supervision relay control
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情