STMicroelectronics

MC33079DT - Low-Noise Quad Op Amp | STMicroelectronics | Audio

MPN: MC33079DT ✓ 啟用中
4.5 nV/√Hz Vdss 14-pin SOIC Package
MOQ: 1 |

MC33079DT 概覽

The STMicroelectronics MC33079DT is a monolithic quad operational amplifier designed for low-noise audio signal paths, featuring 4.5 nV/√Hz voltage noise, a 15 MHz gain-bandwidth product, and a 7 V/µs slew rate. The device is packaged in a 14-pin SOIC for surface-mount production assemblies. Four amplifiers in one package reduce board area and simplify multi-channel audio circuitry.

An operational amplifier is a voltage-gain circuit element used to amplify small signals while improving impedance characteristics. The MC33079 belongs to the low-noise operational-amplifier family within the broader linear-amplifier and signal-conditioning hierarchy. Its low-noise input stage is particularly useful when the amplified signal originates from microphones, pickups, sensors, or line-level audio sources.

The four internal amplifiers share a common supply architecture and are intended for low-voltage audio applications. Key performance characteristics include 4.5 nV/√Hz input-voltage noise and 15 MHz gain-bandwidth product. The 7 V/µs slew rate supports faster signal transitions, while the manufacturer reports very low distortion of 0.002%. These characteristics make the device suitable where low noise, bandwidth, and signal fidelity must coexist in a compact package.

MC33079DT is a general-purpose quad amplifier rather than a dedicated audio-output driver. Each amplifier includes the conventional non-inverting and inverting inputs, an output, and supply pins. The SOIC-14 package provides a practical surface-mount option for industrial and consumer audio boards, active crossovers, preamplifiers, mixers, and instrumentation. Its four-channel organization makes it suitable for multichannel systems requiring consistent amplifier performance.

Typical uses include microphone preamplification, line-level buffering, active equalization, audio summing, and low-level sensor amplification. Designers should select suitable input and feedback networks based on the required noise gain, bandwidth, and output swing. The signal source and load must also be checked against the device's supply-voltage and common-mode limits before layout begins.

For PCB implementation, place input and output paths to minimize parasitic capacitance and keep feedback resistors close to the relevant amplifier pins. Decoupling capacitors should be positioned near the supply pins, while analog and high-impedance traces should remain away from switching nodes. Stable feedback ratios and clean grounding are especially important when low-level audio noise must remain below the source's own noise floor.

This page combines the MC33079DT's documented noise, bandwidth, slew-rate, distortion, and package characteristics with application-focused guidance, pin-compatible replacement analysis, and practical PCB considerations for evaluating the amplifier in new or existing audio designs.

直接替換替代品,適用於 MC33079DT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: MC33079DT (相同外形與佔位) — 差異在於 Gain-Bandwidth Product, Slew Rate.

Texas Instruments
Gain-Bandwidth Product: 1 MHz
Slew Rate: 0.6 V/µs
比較對象 MC33079DT →

MC33079DG

✅ 直接替換
onsemi
📦 14-pin SOIC
General-purpose operational amplifier · 4 circuits · Bipolar · 16 MHz · 7 V/us · 4.5 nV/sqrt(Hz) · 0.002% · 80 dB

聯絡詢價

查看資料表 →

MC33079DR2G

✅ 直接替換
📦 14-pin SOIC
Same-family onsemi alternative in a 14-pin SOIC package; supply, bias-current, and output-swing differences versus MC33079DT must be checked in the current datasheet

📋 參考替代品(不在目錄中)

LM837MX

✅ 直接替換
📦 14-pin SOIC
Cross-brand 14-pin SOIC audio amplifier candidate; noise density and bandwidth are not quantified in the comparison result, so deviations from the MC33079DT's 4.5 nV/√Hz and 15 MHz ratings require datasheet confirmation

📋 參考替代品(不在目錄中)

MC3403DR

✅ 直接替換
Texas Instruments
📦 14-pin SOIC
Quad operational amplifier · 4 circuits · ±2.5 V to ±15 V · 30 V · 1 MHz · 0.6 V/µs · −25 °C to 85 °C · True differential inputs

✓ 有庫存

$0.4102 / 單位

查看資料表 →

OPA1644A

✅ 直接替換
📦 14-pin SOIC
Pin-compatible audio-amplifier alternative identified in an MC33079 replacement discussion; the different amplifier family has not been quantified against the MC33079DT's 4.5 nV/√Hz noise and 15 MHz gain bandwidth

📋 參考替代品(不在目錄中)

MC33079DT 最大額定值與電氣特性

Number of Amplifiers 4 circuits
Input-Voltage Noise Density 4.5 nV/√Hz
Gain-Bandwidth Product 15 MHz
Slew Rate 7 V/µs
Distortion 0.002%
Primary Application Low-noise audio amplification
封裝 14-pin SOIC
安裝類型 Surface mount
Amplifier Architecture Monolithic quad operational amplifier
Output Stage Large output voltage swing
RoHS 狀態 unknown
REACH Status unknown

MC33079DT 14-pin soic 腳位配置指南

MC33079DT(14-pin soic 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

MC33079DT 的 14-pin soic 封裝腳位圖

無詳細腳位定義資料: MC33079DT.

請參閱 資料表 以查看完整腳位配置。

典型應用

MC33079DT 適用於 6 應用s: Low-Level Audio Preamplification, Active Audio Equalization, Audio Mixing and Summing, Active Crossover Networks, Low-Level Sensor Signal Conditioning, Headphone and Line-Level Buffering.

🎧

Low-Level Audio Preamplification

The MC33079DT suits microphone, pickup, and line-level preamplification because its 4.5 nV/√Hz input-voltage noise limits the amplifier's contribution to low-level audio signals. Each of its four amplifiers can support a separate mono or balanced-difference input stage. The 15 MHz gain-bandwidth product gives designers margin for moderate closed-loop gains, while the 7 V/µs slew rate preserves large-signal transient performance. Feedback resistance and source impedance should be selected to balance noise gain against the usable bandwidth.

🔧

Active Audio Equalization

The MC33079DT can implement first-order or higher-order active equalizer stages where low noise and moderate bandwidth are both important. Its four amplifiers provide a practical way to build dual-band or multi-channel tone controls without using four separate packages. The 4.5 nV/√Hz noise density helps preserve quiet passages, while the 15 MHz gain-bandwidth product allows useful closed-loop bandwidth at common audio gains. Component tolerances in the feedback and frequency-selective networks should be evaluated against the intended EQ curve.

🎚️

Audio Mixing and Summing

Four integrated amplifiers make the MC33079DT useful for compact audio mixers where several low-level sources must be summed before an ADC or power amplifier. Its low-voltage noise is beneficial when source amplitudes approach the noise floor, and the 15 MHz gain-bandwidth product provides more bandwidth than many audio-only stages require. Maintain compatible ground references across summing nodes, avoid excessive source loading, and verify the output swing for the chosen supply voltage and load.

🔊

Active Crossover Networks

The MC33079DT is appropriate for active crossover designs requiring separate low-, mid-, and high-frequency channels. Its four amplifiers can implement buffered filter stages for a compact three-way system, and the 4.5 nV/√Hz noise density helps preserve low-level output from the crossover. The 7 V/µs slew rate and 15 MHz gain-bandwidth product provide useful headroom beyond the audible band, although component tolerances and filter topology determine actual channel matching.

🧩

Low-Level Sensor Signal Conditioning

The MC33079DT can condition low-level sensor outputs when the required bandwidth is moderate and source noise must not be masked by amplifier noise. Its 4.5 nV/√Hz input-voltage noise is useful for resistive or capacitive sensors, while four channels permit compact instrumentation with several measurement paths. The design must account for input bias current, common-mode range, and sensor drive impedance. Those operating limits should be confirmed from the manufacturer electrical characteristics before selecting the amplifier.

📱

Headphone and Line-Level Buffering

The MC33079DT can buffer line-level signals or form the input stage of a headphone preamplifier when low noise and adequate drive capability are required. The 4.5 nV/√Hz input noise supports quiet audio reproduction, while the 7 V/µs slew rate helps reproduce transients without excessive distortion. Check output-current demand, voltage headroom, and stability with the intended load. A passive output attenuator may be needed if the amplifier cannot directly drive the selected impedance.

推薦產品摘要

OPA1644A Low-noise audio amplifier alternative 用於: Low-Level Audio Preamplification, Active Audio Equalization, Active Crossover Networks, Headphone and Line-Level Buffering LM837MX Quad audio amplifier alternative 用於: Low-Level Audio Preamplification, Active Audio Equalization, Active Crossover Networks CS4461-CZZ Cirrus Logic Inc. 用於: Audio Mixing and Summing WM8985CGEFL/R Cirrus Logic Inc. 用於: Audio Mixing and Summing, Headphone and Line-Level Buffering INA240A1PW Texas Instruments 用於: Low-Level Sensor Signal Conditioning INA149AIDR Texas Instruments 用於: Low-Level Sensor Signal Conditioning
What are the key specifications of MC33079DT that engineers should know?
The MC33079DT is a four-circuit low-noise operational amplifier with 4.5 nV/√Hz input-voltage noise, a 15 MHz gain-bandwidth product, a 7 V/µs slew rate, and 0.002% distortion. According to the STMicroelectronics MC33079 product description, the monolithic quad amplifier is particularly suited to audio applications and is offered in a 14-pin SOIC package. These specifications make it appropriate for low-level audio preamplification, buffering, active filtering, and multichannel signal conditioning.
Where can I download the MC33079DT datasheet PDF?
The MC33079DT datasheet can be obtained from the official STMicroelectronics MC33079 product page, which also provides the device description and technical documentation. An archived MC33079DT datasheet PDF is also listed by AllDataSheet. For design sign-off, use the STMicroelectronics documentation because package drawings, electrical limits, and application guidance should be checked against the manufacturer version applicable to your production design.
Where can I find the MC33079DT pinout?
The MC33079DT pinout appears in the MC33079DT datasheet under the pin-description and package-drawing information. The device is a 14-pin SOIC containing four operational amplifiers, with the exposed connections arranged as three amplifiers using shared supply pins and one amplifier using dedicated supply pins. Use the manufacturer pin-description table when assigning PCB nets and verify pin 1 orientation against the package drawing.
Is the MC33079DT suitable for audio preamplifier applications?
The MC33079DT is suitable for low-level audio preamplification because its documented input-voltage noise is 4.5 nV/√Hz and its gain-bandwidth product is 15 MHz. According to the STMicroelectronics product description, the amplifier is particularly well suited to audio applications. Its 7 V/µs slew rate also allows it to process signals with reasonable full-power bandwidth, although the actual closed-loop response depends on the selected gain and feedback network.
What is the difference between MC33079DT and MC33079DG?
Both MC33079DT and MC33079DG are described as low-noise quad operational amplifiers in 14-pin SOIC packages, and cross-reference information identifies MC33079DG as a directly comparable alternative. The documented MC33079 family performance includes 4.5 nV/√Hz noise and 15 MHz gain bandwidth. Because the two devices come from different manufacturers, verify supply range, input bias current, output swing, and the complete pin description against current datasheets before treating the substitution as production-approved.
MC33079DT vs LM837MX - which is better for low-noise audio?
The MC33079DT is the better-documented choice for direct comparison with the LM837MX because STMicroelectronics specifies 4.5 nV/√Hz noise, 15 MHz gain bandwidth, 7 V/µs slew rate, and 0.002% distortion for the MC33079 family. The LM837MX appears in cross-brand comparison results, but equivalent noise and distortion performance must be checked in its current datasheet. Choose the MC33079DT when its documented audio characteristics and 14-pin SOIC footprint satisfy the design.
When should I choose MC33079DT over MC33079DG?
Choose the MC33079DT when the design calls for an STMicroelectronics-sourced 14-pin SOIC quad amplifier and its documented 4.5 nV/√Hz noise and 15 MHz gain bandwidth are appropriate. Choose MC33079DG when an onsemi-sourced equivalent is needed and its current electrical limits have been verified against the intended power supply, source impedance, and load. The package similarity alone should not determine the decision because bias current, common-mode range, and output swing can affect bias-point accuracy.
What can replace MC33079DT on the same PCB footprint?
The MC33079DG is the clearest drop-in candidate because cross-reference information identifies it as a 14-pin SOIC quad amplifier and directly associates it with the MC33079 family. The MC33079DR2G, LM837MX, MC3403DR, and OPA1644A are additional candidates requiring pin-by-pin and electrical verification. Confirm pin functions, supply limits, common-mode range, output swing, noise, slew rate, and stability before substituting any candidate into a qualified design.
Is MC33079DT the same as OPA1644A?
No, the MC33079DT and OPA1644A are not the same device, although a published audio discussion identifies the OPA1644A as pin-compatible with an MC33079 family device when mounted on an adapter. The MC33079DT is a four-amplifier low-noise audio part in a 14-pin SOIC, while the OPA1644A is a different amplifier family with its own electrical limits. Verify every pin, especially supply connections, before considering it for a direct PCB replacement.
How much headroom is needed for stable MC33079DT audio gain stages?
The MC33079DT gain stage must remain inside the amplifier's input common-mode and output-swing limits, with the exact boundaries checked in the manufacturer electrical characteristics. A noise gain of 10, for example, requires ten times more input-referred noise than a gain of one for the same closed-loop bandwidth. Keep the selected gain below the usable bandwidth and slew-rate requirements of the source, and test the complete feedback network for stability across tolerances.
Does MC33079DT require dual supplies for audio use?
The MC33079DT requires a bipolar supply arrangement for a centered, zero-volt audio signal unless the circuit intentionally offsets the signal into a single-supply input range. The exact minimum and maximum supply voltages and common-mode limits must be confirmed from the manufacturer datasheet. In a dual-supply design, route analog ground and supply returns carefully; in a single-supply design, bias the non-inverting input so the output retains adequate headroom.
Where to buy MC33079DT online?
Use the Request a Quote form on this page to ask about MC33079DT availability, order quantity, and delivery terms. The manufacturer product page and authorized catalog listings can also be used to confirm the correct package suffix and lifecycle status. XAIPART will confirm current commercial details against the requested quantity rather than presenting a static price that may no longer reflect market conditions.
What is the price of MC33079DT?
Current MC33079DT pricing depends on order quantity, package suffix, inventory position, and requested delivery terms. Use the Request a Quote form on this page for the price applicable to your exact quantity. The request should identify the 14-pin SOIC MC33079DT MPN, production quantity, and target delivery date so the commercial offer can be matched to the intended assembly schedule.
What is the lead time for MC33079DT?
MC33079DT lead time depends on current manufacturer inventory, the number of units required, and whether the order is for production or prototypes. Submit the required quantity and target date through the Request a Quote form on this page to obtain a current commitment. For scheduled production, also include the date by which components must arrive so allocation and logistics can be assessed against the complete assembly plan.
Is MC33079DT in stock?
MC33079DT availability changes with order quantity and market activity, so stock should be confirmed for the exact MPN before a purchase order is released. Use the Request a Quote form on this page and specify the required quantity, target price, and delivery date. The quoted response should be treated as the current commercial commitment for the 14-pin SOIC MC33079DT rather than a general market-status indication.
What layout practices improve MC33079DT audio performance?
Place the MC33079DT input pins, feedback components, and decoupling capacitors close to their associated package pins to minimize parasitic capacitance and inductive noise. Route high-impedance audio inputs away from switching nodes and power-converter traces, and maintain a compact ground return beneath the analog signal path. According to the STMicroelectronics application context, the device is intended for audio use, where clean grounding and low-noise layout directly support its 4.5 nV/√Hz input-noise specification.

工程參考資料,適用於 MC33079DT — 比較、設計指引及合規資訊。

選型指南

Choose the MC33079DT when a four-channel, low-noise audio design requires the documented combination of 4.5 nV/√Hz input-voltage noise, 15 MHz gain-bandwidth product, 7 V/µs slew rate, and a 14-pin SOIC footprint. Select MC33079DG when an onsemi-sourced equivalent is preferred, but verify bias current, common-mode range, and output swing before qualification. Consider LM837MX or MC3403DR when the alternative's current datasheet offers a more favorable parameter or availability position while preserving the package and pin functions. OPA1644A may suit designs where its electrical characteristics are a better functional match, although it is a different amplifier family and requires complete pin and bias verification. In every case, confirm the supply voltage, signal swing, source impedance, load, stability, and production qualification rather than relying on package appearance alone.

與替代品比較

參數 本產品 MC33079DG MC33079DR2G LM837MX MC3403DR OPA1644A
Brand STMicroelectronics onsemi onsemi Texas Instruments Texas Instruments Texas Instruments
Package 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

主要差異化特點

  • Documented low-noise performance for four audio channels (對比MC33079DG)
  • Higher documented bandwidth than a general-purpose audio alternative (對比MC3403DR)
  • Fast documented slew rate for audio transients (對比LM837MX)

設計說明

Place the MC33079DT input pins, feedback resistors, and compensation components close to the relevant amplifier pins. High-impedance audio inputs should be short and surrounded by a grounded guard where appropriate. Keep switching-regulator, digital-clock, and display traces away from the input nodes, because capacitive coupling into a 4.5 nV/√Hz amplifier can create audible interference even when the schematic appears electrically correct.

Route the supply connections directly to the package pins and place the manufacturer-recommended bypass capacitors on the PCB rather than at a distant power branch. Star-point grounding of analog return currents helps prevent output-current excursions in the ground network from modulating the input reference. Confirm the complete supply range and output-swing limits in the electrical characteristics before defining the minimum rail voltage for low-level operation.

Select closed-loop gain and feedback resistance together rather than optimizing bandwidth independently. Higher noise gain reduces the usable bandwidth and may require additional compensation or stability verification. Test each gain stage across expected source impedance, load, component tolerance, and temperature. For filters, calculate component tolerance sensitivity because the quad amplifier's bandwidth alone does not determine channel matching or cutoff accuracy.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The MC33079DT is a general-purpose operational amplifier rather than an automotive-qualified device. Compliance declarations should be confirmed from the current STMicroelectronics product documentation before procurement.

資料驗證日期: 2026-11-16 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

mc33079 datasheet MC33079DT datasheet MC33079DT pinout MC33079DT datasheet pdf MC33079DT equivalent MC33079DT replacement MC33079DT drop-in replacement MC33079DT price MC33079DT stock STMicroelectronics MC33079DT MC33079DT 4.5 nV/√Hz MC33079DT 15 MHz MC33079DT SOIC-14 pinout MC33079DT audio preamplifier MC33079DT vs MC33079DG

相關元件與詞彙

STMicroelectronics MC33079DT MC33079 MC33079DG MC33079DR2G LM837MX MC3403DR OPA1644A Operational amplifier Low-noise operational amplifier Quad operational amplifier Linear amplifier Signal conditioning Voltage gain Input-voltage noise density Gain-bandwidth product Slew rate Audio preamplifier Active crossover Audio mixing Line-level buffering SOIC-14 Surface-mount package Microelectronics
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情