STMicroelectronics

MC33079DT - Low-Noise Quad Op Amp | STMicroelectronics | Audio

N.º de pieza: MC33079DT ✓ Activo
4.5 nV/√Hz Vdss 14-pin SOIC Package
MOQ: 1 |

MC33079DT Descripción general

The STMicroelectronics MC33079DT is a monolithic quad operational amplifier designed for low-noise audio signal paths, featuring 4.5 nV/√Hz voltage noise, a 15 MHz gain-bandwidth product, and a 7 V/µs slew rate. The device is packaged in a 14-pin SOIC for surface-mount production assemblies. Four amplifiers in one package reduce board area and simplify multi-channel audio circuitry.

An operational amplifier is a voltage-gain circuit element used to amplify small signals while improving impedance characteristics. The MC33079 belongs to the low-noise operational-amplifier family within the broader linear-amplifier and signal-conditioning hierarchy. Its low-noise input stage is particularly useful when the amplified signal originates from microphones, pickups, sensors, or line-level audio sources.

The four internal amplifiers share a common supply architecture and are intended for low-voltage audio applications. Key performance characteristics include 4.5 nV/√Hz input-voltage noise and 15 MHz gain-bandwidth product. The 7 V/µs slew rate supports faster signal transitions, while the manufacturer reports very low distortion of 0.002%. These characteristics make the device suitable where low noise, bandwidth, and signal fidelity must coexist in a compact package.

MC33079DT is a general-purpose quad amplifier rather than a dedicated audio-output driver. Each amplifier includes the conventional non-inverting and inverting inputs, an output, and supply pins. The SOIC-14 package provides a practical surface-mount option for industrial and consumer audio boards, active crossovers, preamplifiers, mixers, and instrumentation. Its four-channel organization makes it suitable for multichannel systems requiring consistent amplifier performance.

Typical uses include microphone preamplification, line-level buffering, active equalization, audio summing, and low-level sensor amplification. Designers should select suitable input and feedback networks based on the required noise gain, bandwidth, and output swing. The signal source and load must also be checked against the device's supply-voltage and common-mode limits before layout begins.

For PCB implementation, place input and output paths to minimize parasitic capacitance and keep feedback resistors close to the relevant amplifier pins. Decoupling capacitors should be positioned near the supply pins, while analog and high-impedance traces should remain away from switching nodes. Stable feedback ratios and clean grounding are especially important when low-level audio noise must remain below the source's own noise floor.

This page combines the MC33079DT's documented noise, bandwidth, slew-rate, distortion, and package characteristics with application-focused guidance, pin-compatible replacement analysis, and practical PCB considerations for evaluating the amplifier in new or existing audio designs.

Alternativas directas para MC33079DT — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MC33079DT (mismo factor de forma y huella) — difiere en Gain-Bandwidth Product, Slew Rate.

Texas Instruments
Gain-Bandwidth Product: 1 MHz
Slew Rate: 0.6 V/µs
Comparar con MC33079DT →

MC33079DG

✅ Sustitución directa
onsemi
📦 14-pin SOIC
General-purpose operational amplifier · 4 circuits · Bipolar · 16 MHz · 7 V/us · 4.5 nV/sqrt(Hz) · 0.002% · 80 dB

Consulte el precio

Ver hoja de datos →

MC33079DR2G

✅ Sustitución directa
📦 14-pin SOIC
Same-family onsemi alternative in a 14-pin SOIC package; supply, bias-current, and output-swing differences versus MC33079DT must be checked in the current datasheet

📋 Alternativa de referencia (no en el catálogo)

LM837MX

✅ Sustitución directa
📦 14-pin SOIC
Cross-brand 14-pin SOIC audio amplifier candidate; noise density and bandwidth are not quantified in the comparison result, so deviations from the MC33079DT's 4.5 nV/√Hz and 15 MHz ratings require datasheet confirmation

📋 Alternativa de referencia (no en el catálogo)

MC3403DR

✅ Sustitución directa
Texas Instruments
📦 14-pin SOIC
Quad operational amplifier · 4 circuits · ±2.5 V to ±15 V · 30 V · 1 MHz · 0.6 V/µs · −25 °C to 85 °C · True differential inputs

✓ En stock

$0.4102 / unidad

Ver hoja de datos →

OPA1644A

✅ Sustitución directa
📦 14-pin SOIC
Pin-compatible audio-amplifier alternative identified in an MC33079 replacement discussion; the different amplifier family has not been quantified against the MC33079DT's 4.5 nV/√Hz noise and 15 MHz gain bandwidth

📋 Alternativa de referencia (no en el catálogo)

MC33079DT Valores máximos y características eléctricas

Number of Amplifiers 4 circuits
Input-Voltage Noise Density 4.5 nV/√Hz
Gain-Bandwidth Product 15 MHz
Slew Rate 7 V/µs
Distortion 0.002%
Primary Application Low-noise audio amplification
Encapsulado 14-pin SOIC
Tipo de montaje Surface mount
Amplifier Architecture Monolithic quad operational amplifier
Output Stage Large output voltage swing
Estado RoHS unknown
REACH Status unknown

Guía de configuración de pines de MC33079DT 14-pin soic

Configuración de pines para MC33079DT (encapsulado 14-pin soic). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 14-pin soic para MC33079DT

No hay datos detallados de patillaje disponibles para MC33079DT.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MC33079DT es adecuado para 6 aplicacións: Low-Level Audio Preamplification, Active Audio Equalization, Audio Mixing and Summing, Active Crossover Networks, Low-Level Sensor Signal Conditioning, Headphone and Line-Level Buffering.

🎧

Low-Level Audio Preamplification

The MC33079DT suits microphone, pickup, and line-level preamplification because its 4.5 nV/√Hz input-voltage noise limits the amplifier's contribution to low-level audio signals. Each of its four amplifiers can support a separate mono or balanced-difference input stage. The 15 MHz gain-bandwidth product gives designers margin for moderate closed-loop gains, while the 7 V/µs slew rate preserves large-signal transient performance. Feedback resistance and source impedance should be selected to balance noise gain against the usable bandwidth.

🔧

Active Audio Equalization

The MC33079DT can implement first-order or higher-order active equalizer stages where low noise and moderate bandwidth are both important. Its four amplifiers provide a practical way to build dual-band or multi-channel tone controls without using four separate packages. The 4.5 nV/√Hz noise density helps preserve quiet passages, while the 15 MHz gain-bandwidth product allows useful closed-loop bandwidth at common audio gains. Component tolerances in the feedback and frequency-selective networks should be evaluated against the intended EQ curve.

🎚️

Audio Mixing and Summing

Four integrated amplifiers make the MC33079DT useful for compact audio mixers where several low-level sources must be summed before an ADC or power amplifier. Its low-voltage noise is beneficial when source amplitudes approach the noise floor, and the 15 MHz gain-bandwidth product provides more bandwidth than many audio-only stages require. Maintain compatible ground references across summing nodes, avoid excessive source loading, and verify the output swing for the chosen supply voltage and load.

🔊

Active Crossover Networks

The MC33079DT is appropriate for active crossover designs requiring separate low-, mid-, and high-frequency channels. Its four amplifiers can implement buffered filter stages for a compact three-way system, and the 4.5 nV/√Hz noise density helps preserve low-level output from the crossover. The 7 V/µs slew rate and 15 MHz gain-bandwidth product provide useful headroom beyond the audible band, although component tolerances and filter topology determine actual channel matching.

🧩

Low-Level Sensor Signal Conditioning

The MC33079DT can condition low-level sensor outputs when the required bandwidth is moderate and source noise must not be masked by amplifier noise. Its 4.5 nV/√Hz input-voltage noise is useful for resistive or capacitive sensors, while four channels permit compact instrumentation with several measurement paths. The design must account for input bias current, common-mode range, and sensor drive impedance. Those operating limits should be confirmed from the manufacturer electrical characteristics before selecting the amplifier.

📱

Headphone and Line-Level Buffering

The MC33079DT can buffer line-level signals or form the input stage of a headphone preamplifier when low noise and adequate drive capability are required. The 4.5 nV/√Hz input noise supports quiet audio reproduction, while the 7 V/µs slew rate helps reproduce transients without excessive distortion. Check output-current demand, voltage headroom, and stability with the intended load. A passive output attenuator may be needed if the amplifier cannot directly drive the selected impedance.

Resumen de productos recomendados

OPA1644A Low-noise audio amplifier alternative Se usa en: Low-Level Audio Preamplification, Active Audio Equalization, Active Crossover Networks, Headphone and Line-Level Buffering LM837MX Quad audio amplifier alternative Se usa en: Low-Level Audio Preamplification, Active Audio Equalization, Active Crossover Networks CS4461-CZZ Cirrus Logic Inc. Se usa en: Audio Mixing and Summing WM8985CGEFL/R Cirrus Logic Inc. Se usa en: Audio Mixing and Summing, Headphone and Line-Level Buffering INA240A1PW Texas Instruments Se usa en: Low-Level Sensor Signal Conditioning INA149AIDR Texas Instruments Se usa en: Low-Level Sensor Signal Conditioning
What are the key specifications of MC33079DT that engineers should know?
The MC33079DT is a four-circuit low-noise operational amplifier with 4.5 nV/√Hz input-voltage noise, a 15 MHz gain-bandwidth product, a 7 V/µs slew rate, and 0.002% distortion. According to the STMicroelectronics MC33079 product description, the monolithic quad amplifier is particularly suited to audio applications and is offered in a 14-pin SOIC package. These specifications make it appropriate for low-level audio preamplification, buffering, active filtering, and multichannel signal conditioning.
Where can I download the MC33079DT datasheet PDF?
The MC33079DT datasheet can be obtained from the official STMicroelectronics MC33079 product page, which also provides the device description and technical documentation. An archived MC33079DT datasheet PDF is also listed by AllDataSheet. For design sign-off, use the STMicroelectronics documentation because package drawings, electrical limits, and application guidance should be checked against the manufacturer version applicable to your production design.
Where can I find the MC33079DT pinout?
The MC33079DT pinout appears in the MC33079DT datasheet under the pin-description and package-drawing information. The device is a 14-pin SOIC containing four operational amplifiers, with the exposed connections arranged as three amplifiers using shared supply pins and one amplifier using dedicated supply pins. Use the manufacturer pin-description table when assigning PCB nets and verify pin 1 orientation against the package drawing.
Is the MC33079DT suitable for audio preamplifier applications?
The MC33079DT is suitable for low-level audio preamplification because its documented input-voltage noise is 4.5 nV/√Hz and its gain-bandwidth product is 15 MHz. According to the STMicroelectronics product description, the amplifier is particularly well suited to audio applications. Its 7 V/µs slew rate also allows it to process signals with reasonable full-power bandwidth, although the actual closed-loop response depends on the selected gain and feedback network.
What is the difference between MC33079DT and MC33079DG?
Both MC33079DT and MC33079DG are described as low-noise quad operational amplifiers in 14-pin SOIC packages, and cross-reference information identifies MC33079DG as a directly comparable alternative. The documented MC33079 family performance includes 4.5 nV/√Hz noise and 15 MHz gain bandwidth. Because the two devices come from different manufacturers, verify supply range, input bias current, output swing, and the complete pin description against current datasheets before treating the substitution as production-approved.
MC33079DT vs LM837MX - which is better for low-noise audio?
The MC33079DT is the better-documented choice for direct comparison with the LM837MX because STMicroelectronics specifies 4.5 nV/√Hz noise, 15 MHz gain bandwidth, 7 V/µs slew rate, and 0.002% distortion for the MC33079 family. The LM837MX appears in cross-brand comparison results, but equivalent noise and distortion performance must be checked in its current datasheet. Choose the MC33079DT when its documented audio characteristics and 14-pin SOIC footprint satisfy the design.
When should I choose MC33079DT over MC33079DG?
Choose the MC33079DT when the design calls for an STMicroelectronics-sourced 14-pin SOIC quad amplifier and its documented 4.5 nV/√Hz noise and 15 MHz gain bandwidth are appropriate. Choose MC33079DG when an onsemi-sourced equivalent is needed and its current electrical limits have been verified against the intended power supply, source impedance, and load. The package similarity alone should not determine the decision because bias current, common-mode range, and output swing can affect bias-point accuracy.
What can replace MC33079DT on the same PCB footprint?
The MC33079DG is the clearest drop-in candidate because cross-reference information identifies it as a 14-pin SOIC quad amplifier and directly associates it with the MC33079 family. The MC33079DR2G, LM837MX, MC3403DR, and OPA1644A are additional candidates requiring pin-by-pin and electrical verification. Confirm pin functions, supply limits, common-mode range, output swing, noise, slew rate, and stability before substituting any candidate into a qualified design.
Is MC33079DT the same as OPA1644A?
No, the MC33079DT and OPA1644A are not the same device, although a published audio discussion identifies the OPA1644A as pin-compatible with an MC33079 family device when mounted on an adapter. The MC33079DT is a four-amplifier low-noise audio part in a 14-pin SOIC, while the OPA1644A is a different amplifier family with its own electrical limits. Verify every pin, especially supply connections, before considering it for a direct PCB replacement.
How much headroom is needed for stable MC33079DT audio gain stages?
The MC33079DT gain stage must remain inside the amplifier's input common-mode and output-swing limits, with the exact boundaries checked in the manufacturer electrical characteristics. A noise gain of 10, for example, requires ten times more input-referred noise than a gain of one for the same closed-loop bandwidth. Keep the selected gain below the usable bandwidth and slew-rate requirements of the source, and test the complete feedback network for stability across tolerances.
Does MC33079DT require dual supplies for audio use?
The MC33079DT requires a bipolar supply arrangement for a centered, zero-volt audio signal unless the circuit intentionally offsets the signal into a single-supply input range. The exact minimum and maximum supply voltages and common-mode limits must be confirmed from the manufacturer datasheet. In a dual-supply design, route analog ground and supply returns carefully; in a single-supply design, bias the non-inverting input so the output retains adequate headroom.
Where to buy MC33079DT online?
Use the Request a Quote form on this page to ask about MC33079DT availability, order quantity, and delivery terms. The manufacturer product page and authorized catalog listings can also be used to confirm the correct package suffix and lifecycle status. XAIPART will confirm current commercial details against the requested quantity rather than presenting a static price that may no longer reflect market conditions.
What is the price of MC33079DT?
Current MC33079DT pricing depends on order quantity, package suffix, inventory position, and requested delivery terms. Use the Request a Quote form on this page for the price applicable to your exact quantity. The request should identify the 14-pin SOIC MC33079DT MPN, production quantity, and target delivery date so the commercial offer can be matched to the intended assembly schedule.
What is the lead time for MC33079DT?
MC33079DT lead time depends on current manufacturer inventory, the number of units required, and whether the order is for production or prototypes. Submit the required quantity and target date through the Request a Quote form on this page to obtain a current commitment. For scheduled production, also include the date by which components must arrive so allocation and logistics can be assessed against the complete assembly plan.
Is MC33079DT in stock?
MC33079DT availability changes with order quantity and market activity, so stock should be confirmed for the exact MPN before a purchase order is released. Use the Request a Quote form on this page and specify the required quantity, target price, and delivery date. The quoted response should be treated as the current commercial commitment for the 14-pin SOIC MC33079DT rather than a general market-status indication.
What layout practices improve MC33079DT audio performance?
Place the MC33079DT input pins, feedback components, and decoupling capacitors close to their associated package pins to minimize parasitic capacitance and inductive noise. Route high-impedance audio inputs away from switching nodes and power-converter traces, and maintain a compact ground return beneath the analog signal path. According to the STMicroelectronics application context, the device is intended for audio use, where clean grounding and low-noise layout directly support its 4.5 nV/√Hz input-noise specification.

Datos de referencia de ingeniería para MC33079DT — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the MC33079DT when a four-channel, low-noise audio design requires the documented combination of 4.5 nV/√Hz input-voltage noise, 15 MHz gain-bandwidth product, 7 V/µs slew rate, and a 14-pin SOIC footprint. Select MC33079DG when an onsemi-sourced equivalent is preferred, but verify bias current, common-mode range, and output swing before qualification. Consider LM837MX or MC3403DR when the alternative's current datasheet offers a more favorable parameter or availability position while preserving the package and pin functions. OPA1644A may suit designs where its electrical characteristics are a better functional match, although it is a different amplifier family and requires complete pin and bias verification. In every case, confirm the supply voltage, signal swing, source impedance, load, stability, and production qualification rather than relying on package appearance alone.

Comparación con alternativas

Parámetro Este producto MC33079DG MC33079DR2G LM837MX MC3403DR OPA1644A
Brand STMicroelectronics onsemi onsemi Texas Instruments Texas Instruments Texas Instruments
Package 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

Diferenciadores clave

  • Documented low-noise performance for four audio channels (frente a MC33079DG)
  • Higher documented bandwidth than a general-purpose audio alternative (frente a MC3403DR)
  • Fast documented slew rate for audio transients (frente a LM837MX)

Notas de diseño

Place the MC33079DT input pins, feedback resistors, and compensation components close to the relevant amplifier pins. High-impedance audio inputs should be short and surrounded by a grounded guard where appropriate. Keep switching-regulator, digital-clock, and display traces away from the input nodes, because capacitive coupling into a 4.5 nV/√Hz amplifier can create audible interference even when the schematic appears electrically correct.

Route the supply connections directly to the package pins and place the manufacturer-recommended bypass capacitors on the PCB rather than at a distant power branch. Star-point grounding of analog return currents helps prevent output-current excursions in the ground network from modulating the input reference. Confirm the complete supply range and output-swing limits in the electrical characteristics before defining the minimum rail voltage for low-level operation.

Select closed-loop gain and feedback resistance together rather than optimizing bandwidth independently. Higher noise gain reduces the usable bandwidth and may require additional compensation or stability verification. Test each gain stage across expected source impedance, load, component tolerance, and temperature. For filters, calculate component tolerance sensitivity because the quad amplifier's bandwidth alone does not determine channel matching or cutoff accuracy.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The MC33079DT is a general-purpose operational amplifier rather than an automotive-qualified device. Compliance declarations should be confirmed from the current STMicroelectronics product documentation before procurement.

Datos verificados el: 2026-11-16 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

mc33079 datasheet MC33079DT datasheet MC33079DT pinout MC33079DT datasheet pdf MC33079DT equivalent MC33079DT replacement MC33079DT drop-in replacement MC33079DT price MC33079DT stock STMicroelectronics MC33079DT MC33079DT 4.5 nV/√Hz MC33079DT 15 MHz MC33079DT SOIC-14 pinout MC33079DT audio preamplifier MC33079DT vs MC33079DG

Componentes & términos relacionados

STMicroelectronics MC33079DT MC33079 MC33079DG MC33079DR2G LM837MX MC3403DR OPA1644A Operational amplifier Low-noise operational amplifier Quad operational amplifier Linear amplifier Signal conditioning Voltage gain Input-voltage noise density Gain-bandwidth product Slew rate Audio preamplifier Active crossover Audio mixing Line-level buffering SOIC-14 Surface-mount package Microelectronics
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ