MC9S08MM64VLH - 8-Bit 48MHz 64KB MCU | NXP | 64-LQFP
MPN: MC9S08MM64VLH ✗ 停產MC9S08MM64VLH 概覽
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and I/O into a single device. The S08 core uses a compact instruction set suited to embedded control systems. Within the product hierarchy, the MC9S08MM64VLH is an 8-bit microcontroller, part of the broader embedded-processing and semiconductor category. Its combination of Flash memory, analog functions, communication capability, and external I/O allows a board to perform control, measurement, and user-interface functions without requiring several separate devices.
Key specifications include a 48 MHz maximum clock, 64 KB of Flash program storage, a 1.8 V to 3.6 V supply range, and 33 I/O ports. NXP describes operation at up to 48 MHz above the specified upper supply threshold, 40 MHz above 2.1 V, and 20 MHz above 1.8 V across the stated temperature condition. The 64-LQFP package measures 10 mm by 10 mm and supports surface-mount assembly, providing ample pin access for analog, communication, display, and general-purpose control connections.
The S08MM architecture is designed for cost-sensitive embedded systems requiring more measurement capability than a basic general-purpose MCU. USB connectivity can support direct peripheral interfacing, while the integrated precision analog resources are suitable for instrumentation and industrial equipment. The family also targets medical products that require compact control electronics and accurate analog measurement. Flash memory allows field-programmable application firmware, and the broad operating-voltage range supports systems operating from 1.8 V through 3.6 V rails.
Typical uses include industrial measurement instruments, medical-device control modules, USB-connected compact peripherals, graphic-display controllers, and low-cost embedded control systems. In these applications, the MCU can manage sensor acquisition, run control algorithms, manage display updates, and coordinate USB data transfer. Its 33 I/O ports also allow direct connection of sensors, switches, indicators, and communication peripherals while limiting the need for external interface expansion.
Designers should select the correct operating-frequency limit for the actual supply voltage and temperature. Decoupling, grounding, analog-signal routing, and exposed-pad or thermal management must follow the manufacturer layout guidance. Because firmware, interrupt configuration, memory organization, and peripheral assignments are device-specific, validate the complete hardware and software design against the NXP datasheet before production release.
This product page consolidates the device identity, operating conditions, package details, sourcing information, drop-in candidates, and practical design considerations needed for initial MCU selection and PCB planning.
直接替換替代品,適用於 MC9S08MM64VLH — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MC9S08MM64VLH (相同外形與佔位) — 差異在於 Package, USB Connectivity, Architecture, Core, Flash Memory.
MC9S08MM128VLH
✅ 直接替換📋 參考替代品(不在目錄中)
MC9S08JE64VLH
✅ 直接替換聯絡詢價
查看資料表 →MC9S08MM64VLH 最大額定值與電氣特性
| Device Type | 8-bit S08 Flash Microcontroller |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB (64K x 8) |
| Supply Voltage Range | 1.8 V to 3.6 V |
| CPU Frequency at 2.1 V or Higher | Up to 40 MHz |
| CPU Frequency at 1.8 V | Up to 20 MHz |
| Number of I/O Ports | 33 ports |
| Architecture | S08 8-bit CISC core |
| Program Memory Type | Flash |
| 封裝 | 64-LQFP (LFQP), 10 mm x 10 mm |
| 安裝類型 | Surface Mount |
| USB Connectivity | Supported by the S08MM 9S08MM128/64/32 family |
| Analog Measurement Features | 12-bit and 16-bit features |
| Graphic Display Support | Supported by the S08MM 9S08MM128/64/32 family |
| Temperature Range | Up to 105 °C operating condition stated for 20 MHz, 40 MHz, and 48 MHz performance modes |
| RoHS 狀態 | RoHS compliant |
| Instruction Set | HCS08 instruction set |
| Manufacturer Lifecycle Status | End of Life |
MC9S08MM64VLH 64-lqfp (lfqp), 10 mm x 10 mm 腳位配置指南
MC9S08MM64VLH(64-lqfp (lfqp), 10 mm x 10 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: MC9S08MM64VLH.
請參閱 資料表 以查看完整腳位配置。
典型應用
MC9S08MM64VLH 適用於 6 應用s: Industrial Measurement Instruments, USB-Connected Embedded Peripherals, Medical Device Control Modules, Graphic Display Controllers, Precision Analog Control Systems, Compact Industrial Control Modules.
Industrial Measurement Instruments
The MC9S08MM64VLH suits compact industrial measurement instruments that combine sensor conditioning, digital control, and local communications. Its 48 MHz S08 core provides useful processing headroom for measurement sequencing and control algorithms, while the 64 KB of Flash stores application firmware, calibration parameters, and diagnostic routines. The 33 I/O ports support digital sensors, switches, indicators, and peripheral control without requiring a large I/O expander. NXP identifies the S08MM family as suitable for instrumentation applications requiring significant precision analog capability, making the device appropriate when compactness and measurement integration matter more than a high-performance 32-bit architecture.
推薦
USB-Connected Embedded Peripherals
The MC9S08MM64VLH is appropriate for USB-connected embedded peripherals that combine device control with USB communication. The S08MM 9S08MM128/64/32 family provides USB connectivity, allowing the MCU to communicate directly with a host while controlling sensors, indicators, relays, or display elements. Its 48 MHz maximum operating frequency supports responsive protocol handling and background control, and 64 KB of Flash accommodates firmware for USB enumeration, data acquisition, and device management. Designers should use the NXP pin, electrical, and reference-layout guidance because USB signal integrity, decoupling, and bus-state behavior remain critical to reliable operation.
推薦
Medical Device Control Modules
The MC9S08MM64VLH can support compact medical-device control modules that require local processing, measurement functions, and external connectivity. NXP identifies the S08MM family as ideal for medical applications and other equipment requiring significant precision analog capability. The 33 I/O ports permit direct attachment of sensors, status indicators, operator inputs, and actuator controls, while the 64 KB Flash area supports dedicated control firmware. Final suitability depends on the device qualification, electrical reliability requirements, risk assessment, and validation process applicable to the finished medical product; this classification alone does not establish medical certification.
推薦
Graphic Display Controllers
The MC9S08MM64VLH is suitable for small graphic-display controllers where display updates, input handling, and peripheral monitoring must share one microcontroller. The S08MM family provides graphic-display support, while the 48 MHz S08 core can manage interface activity and application logic. Its 64 KB of Flash holds display firmware, fonts, and control code, and the 33 I/O ports can connect display-driver devices, keys, indicators, and sensors. The 64-LQFP package also exposes more pins than smaller lead-count packages, simplifying access to parallel, serial, and control signals when the board area permits a 10 mm by 10 mm footprint.
推薦
Precision Analog Control Systems
The MC9S08MM64VLH fits precision analog control systems that combine an 8-bit MCU with closely integrated measurement resources. NXP describes the S08MM family as delivering unparalleled measurement accuracy and supporting 12-bit and 16-bit features. At up to 48 MHz, the core can perform control loops, data conditioning, and communication alongside acquisition, while the 1.8 V to 3.6 V supply range permits integration into compact low-voltage systems. The 33 available I/O ports support analog multiplexing, reference control, sensor inputs, and status signaling. Designers should verify the exact converter resolution, reference requirements, sampling behavior, and pin multiplexing in the manufacturer documentation for the selected device configuration.
推薦
Compact Industrial Control Modules
The MC9S08MM64VLH can serve as the controller in a compact industrial module that accepts digital commands, monitors inputs, and drives embedded actuators. Its 33 I/O ports provide substantial direct connectivity, while 64 KB of Flash supports control logic, diagnostics, and configuration storage. The 8-bit architecture can be advantageous where deterministic peripheral handling and low system complexity are more important than 32-bit computation. For isolated or distributed installations, communication transceivers can be connected alongside the MCU, but their interface levels, timing, grounding, and protection requirements must be integrated into the overall PCB and enclosure design.
推薦
推薦產品摘要
工程參考資料,適用於 MC9S08MM64VLH — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MC9S08MM128VLH | MC9S08JE64VLH |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10x10) | 64-LQFP (10x10) | 64-LQFP (10x10) |
| Processor Architecture | 8-bit S08 CISC core | 8-bit S08 CISC core | 8-bit S08 CISC core |
| Flash Memory | 64 KB | 128 KB, 100% greater | 64 KB indicated by part number |
主要差異化特點
- Integrated S08MM measurement and connectivity feature set (對比MC9S08JE64VLH)
- Higher clock headroom (對比MC9S08JE64VLH)
- Memory-capacity upgrade path within the same family (對比MC9S08MM64VLH)
設計說明
Decouple the MC9S08MM64VLH supply pins using the capacitor values and placement shown in the NXP reference layout. Separate analog and digital return paths where the application permits, and connect the package ground and exposed thermal requirements exactly as directed by the manufacturer drawings. Because the CPU can operate at 20, 40, or 48 MHz depending on supply voltage, verify the regulator tolerance and startup margin before selecting the operating frequency.
Keep clocks, USB data paths, analog inputs, and reset traces short, with continuous ground references beneath signal routes. Follow the NXP pin-description table when assigning every LQFP position and preserve the documented keepout and component-placement guidance. The 64-LQFP footprint offers numerous pins for peripheral functions, but unused inputs must be connected according to the manufacturer recommendations rather than left to chance.
Do not assume that 48 MHz is available at every supply voltage. The documented performance points are 20 MHz above 1.8 V, 40 MHz above 2.1 V, and 48 MHz at the upper operating threshold. Also verify flash size, memory mapping, peripheral multiplexing, and boot behavior before substituting another S08 device; a matching package and 64 KB flash designation alone do not prove software compatibility.
合規資訊
RoHS compliance is stated in the technical listing. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is established for this exact MPN.