MCIMX6Y0CVM05AA - i.MX 6ULL 528MHz ARM Cortex-A7 MPU | NXP
MPN： MCIMX6Y0CVM05AA ✓ 啟用中MCIMX6Y0CVM05AA 概覽
An application processor is a system-on-chip (SoC) that integrates a CPU core, memory controllers, and a wide peripheral mix into a single die, allowing designers to build complete embedded platforms without a companion northbridge. Within NXP's portfolio, the i.MX 6ULL sits in the ultra-low-power entry of the i.MX 6 series, targeting cost-sensitive Linux and RTOS designs that need Cortex-A7 class performance at sub-1 W power envelopes.
Key features include hardware ECC on NAND and DDR interfaces, dual CAN-FD controllers, a hardware cryptography accelerator (CAAM block on related family members), a 24-bit LCD controller, and an integrated PMU that supports dynamic voltage and frequency scaling. The part operates from a 1.2 V to 1.26 V core supply plus a 1.325 V to 1.5 V I/O supply, and is qualified over the -40 C to +105 C industrial temperature range.
Typical applications include human-machine interface (HMI) panels, industrial point-of-sale terminals, low-end gateways, eReaders, smart-home hubs, building automation controllers, and portable medical data loggers. The combination of low BOM cost, deterministic Cortex-A7 performance, and a mature Linux BSP (mainline U-Boot and kernel support) makes it a workhorse for Linux-based edge devices.
When designing with the MCIMX6Y0CVM05AA, allocate a four-layer PCB with a continuous ground plane beneath the MAPBGA, follow NXP's AN5397 power-sequencing recommendations, and budget thermal dissipation for 1 W typical workloads. Decoupling must follow the reference design's capacitor matrix; do not substitute the PMIC without re-running the power-tree analysis.
直接替換替代品，適用於 MCIMX6Y0CVM05AA — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： MCIMX6Y0CVM05AA （相同外形與佔位） — 差異在於 ADC, Core Architecture, Ethernet, Mounting Type, Package.
MCIMX6Y1CVM05AA
✅ 直接替換📋 參考替代品（不在目錄中）
MCIMX6Y2CVM05AA
✅ 直接替換📋 參考替代品（不在目錄中）
MCIMX6Y0CVM05AB
✅ 直接替換📋 參考替代品（不在目錄中）
MCIMX6Y1CVM05AB
✅ 直接替換📋 參考替代品（不在目錄中）
MCIMX6Y2CVM08AA
✅ 直接替換📋 參考替代品（不在目錄中）
MCIMX6Y2CVM08AB
✅ 直接替換📋 參考替代品（不在目錄中）
MCIMX6Y0CVM05AA 最大額定值與電氣特性
| Core Architecture | ARM Cortex-A7 |
| Core Count | 1 Core |
| 資料匯流排寬度 | 32-bit |
| 最大時脈頻率 | 528 MHz |
| L1 Instruction Cache | 32 kB |
| L1 Data Cache | 32 kB |
| Operating Supply Voltage (Core) | 1.2 V to 1.26 V |
| Operating Supply Voltage (I/O) | 1.325 V to 1.5 V |
| Ethernet | 1 x 10/100 MAC |
| USB | 1 x USB OTG |
| UART | 4 |
| I2C | 2 |
| SPI | 2 |
| PWM Channels | 4 |
| Timers | 2 |
| Audio Interfaces | SAI x1, ESAI x1 |
| ADC | 1 x ADC |
| 封裝 | 289-MAPBGA 14x14 mm, 0.8 mm pitch |
| 安裝類型 | Surface Mount |
| RoHS 狀態 | Compliant |
MCIMX6Y0CVM05AA 289-mapbga 14x14 mm, 0.8 mm pitch 腳位配置指南
MCIMX6Y0CVM05AA（289-mapbga 14x14 mm, 0.8 mm pitch 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： MCIMX6Y0CVM05AA.
請參閱 資料表 以查看完整腳位配置。
典型應用
MCIMX6Y0CVM05AA 適用於 6 應用s: Industrial HMI Touch Panels, IoT Edge Gateways, Smart Home and Building Automation Hubs, Portable Medical Data Loggers, Electronic Point-of-Sale Terminals, Industrial Printer and Scanner Controllers.
Industrial HMI Touch Panels
The MCIMX6Y0CVM05AA drives cost-sensitive industrial HMI panels where Linux and a Cortex-A7 class core are sufficient. Its 528 MHz ARM Cortex-A7 core runs Yocto-based Qt or LVDS framebuffers with headroom for touchscreen handling, while the integrated 24-bit LCD controller eliminates an external display bridge. The four UARTs connect to sensor hubs and PLC links, the two I2C ports interface capacitive touch controllers, and the 10/100 Ethernet MAC supports real-time industrial protocols. Pin compatibility with the Y1/Y2 i.MX 6ULL siblings lets designers scale the same PCB across product tiers, and the industrial temperature range suits factory-floor enclosures. Unlike higher-clocked i.MX 6 parts, the Y0 keeps BOM cost low and active power under 1 W for fanless HMI chassis.
推薦
IoT Edge Gateways
The MCIMX6Y0CVM05AA fits Linux-based IoT edge gateways that aggregate sensor data and bridge fieldbuses to the cloud. Its 528 MHz Cortex-A7 runs containerized workloads (Docker, MQTT brokers), the 10/100 Ethernet MAC provides a deterministic uplink, and USB OTG supports a cellular modem dongle for failover connectivity. The two SPI buses handle radio modules (LoRa, sub-GHz transceivers) while the four UARTs bridge RS-485 sensor networks; CAN-FD controllers on the i.MX 6ULL family interface industrial vehicle buses. Compared with Cortex-M based gateways, the A7 core gives engineers a full Linux userspace for edge analytics. The industrial temperature grade and low power profile suit DIN-rail enclosures in unattended locations.
推薦
Smart Home and Building Automation Hubs
The MCIMX6Y0CVM05AA powers smart-home and building-automation hubs running mainline Linux with Z-Wave, Zigbee, or BLE bridges. Its Cortex-A7 core at 528 MHz handles concurrent Matter/Thread border-router stacks, the two SPI ports connect dual-radio modules, and the I2C buses drive sensor and keypad peripherals. The 10/100 Ethernet MAC provides the wired uplink to the home router, while USB OTG supports external storage or audio peripherals. The low power envelope (sub-1 W typical) keeps always-on hub designs within energy-budget targets, and the small 14x14 mm MAPBGA fits compact wall-mount enclosures. Pin compatibility with the Y1/Y2 parts lets the same PCB scale from entry hubs to higher-end controllers with display support.
推薦
Portable Medical Data Loggers
The MCIMX6Y0CVM05AA suits portable medical data loggers where a deterministic Cortex-A7 core and Linux ecosystem simplify IEC 62304 software compliance. Its 528 MHz speed is sufficient for buffering high-rate ADC samples, compressing waveforms, and timestamping events against an RTC, while the two SPI ports interface high-precision analog front ends and the four UARTs bridge to bedside monitors. The integrated ADC handles auxiliary battery and temperature monitoring without external chips. Compared with microcontroller-only designs, the A7 core provides full Linux userspace for SQLite logging, encrypted audit trails, and OTA updates - critical for medical device cybersecurity. The industrial temperature grade and low power profile suit battery-powered ambulatory carts.
推薦
Electronic Point-of-Sale Terminals
The MCIMX6Y0CVM05AA drives electronic point-of-sale (ePOS) terminals where Linux and ARM Cortex-A7 performance balance cost and capability. Its 528 MHz core runs payment stacks, NFC middleware, and a Qt-based cashier UI on the integrated LCD controller; the four UARTs interface receipt printers and barcode scanners, while I2C drives the touchscreen and secure PIN-pad modules. The 10/100 Ethernet MAC supports store-network connectivity, and USB OTG enables external peripherals like customer-facing displays. The hardware crypto accelerator (CAAM block on related family members) accelerates PCI-compliant encryption, and the industrial temperature range suits retail-floor environments. Pin compatibility with the Y1/Y2 i.MX 6ULL siblings allows the same PCB to span entry and high-end ePOS SKUs.
推薦
Industrial Printer and Scanner Controllers
The MCIMX6Y0CVM05AA is a strong fit for industrial label printers, barcode scanners, and document imaging controllers. Its 528 MHz Cortex-A7 core handles image processing, ZPL/ESC-POS emulation, and network print-job queuing under Linux. The two SPI ports drive high-speed image sensors, the SAI/ESAI audio interfaces support beeper/voice-prompt subsystems, and the 10/100 Ethernet MAC serves as the network print-server port. The four UARTs interface cutter modules, RFID readers, and operator panels. Compared with discrete microcontroller designs, the A7 core lets engineers use mature Linux printer stacks and avoids reinventing the print pipeline. The industrial temperature grade and low power budget suit continuous-duty factory installations.
推薦
推薦產品摘要
工程參考資料，適用於 MCIMX6Y0CVM05AA — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MCIMX6Y1CVM05AA | MCIMX6Y2CVM05AA | MCIMX6Y0CVM05AB | MCIMX6Y1CVM05AB | MCIMX6Y2CVM08AA | MCIMX6Y2CVM08AB |
|---|---|---|---|---|---|---|---|
| Package | 289-MAPBGA 14x14 mm | 289-MAPBGA 14x14 mm - same | 289-MAPBGA 14x14 mm - same | 289-MAPBGA 14x14 mm - same | 289-MAPBGA 14x14 mm - same | 289-MAPBGA 14x14 mm - same | 289-MAPBGA 14x14 mm - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | ARM Cortex-A7 | ARM Cortex-A7 | ARM Cortex-A7 | ARM Cortex-A7 | ARM Cortex-A7 | ARM Cortex-A7 | ARM Cortex-A7 |
| Core Count | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| Operating Supply Voltage (Core) | 1.2 V to 1.26 V | 1.2 V to 1.26 V | 1.2 V to 1.26 V | 1.2 V to 1.26 V | 1.2 V to 1.26 V | 1.2 V to 1.26 V | 1.2 V to 1.26 V |
| Operating Supply Voltage (I/O) | 1.325 V to 1.5 V | 1.325 V to 1.5 V | 1.325 V to 1.5 V | 1.325 V to 1.5 V | 1.325 V to 1.5 V | 1.325 V to 1.5 V | 1.325 V to 1.5 V |
| Silicon Revision | A | A | A | B | B | A | B |
主要差異化特點
- Lowest-cost i.MX 6ULL speed grade at 528 MHz (對比MCIMX6Y2CVM08AA)
- Pin-compatible scaling path within the i.MX 6ULL family (對比MCIMX6Y1CVM05AA)
- Mainline Linux and U-Boot support (對比MCIMX6G2CVK05AB)
設計說明
The MCIMX6Y0CVM05AA requires dual voltage rails (1.2 V to 1.26 V core, 1.325 V to 1.5 V I/O) that must be sequenced per NXP application note AN5397. Use the NXP PCA9450 PMIC rather than discrete regulators; this guarantees the correct ramp order, soft-start timing, and fault response. Estimated: at 528 MHz full load, the part draws approximately 350 mA from the 1.2 V rail; verify with your specific workload profile before finalizing the PMIC current rating.
Route the 289-ball MAPBGA on a minimum four-layer PCB with a continuous ground plane beneath the BGA and matched-length DDR traces. Place all decoupling capacitors (per the i.MX 6ULL Hardware Development Guide) within 100 mils of their respective supply balls. Estimated: use at least 1 oz copper on outer layers and 0.5 oz on inner layers to keep DC drop on the core rail under 25 mV at peak load.
At 528 MHz typical workloads, the MCIMX6Y0CVM05AA dissipates approximately 0.8 W to 1.0 W. The 14x14 mm MAPBGA has no exposed thermal pad, so dissipation relies on the PCB copper pour; provide at least 2 square inches of top-layer copper tied to the ground balls to keep junction temperature within the -40 C to +105 C operating range in sealed enclosures.
Do not assume the MCIMX6Y0CVM05AA shares pinout with the i.MX 6SoloLite (i.MX 6SL) or i.MX 6UltraLite (i.MX 6UL) - only i.MX 6ULL CVM 289-MAPBGA parts are pin-compatible. Always cross-reference the i.MX 6ULL datasheet IMX6ULLIEC Rev. 1.2 ordering table against your chosen PCB footprint; substituting a 9x9 mm CVK package will not align with the 14x14 mm CVM land pattern.
合規資訊
RoHS and REACH compliant per NXP product page. Industrial temperature grade; not AEC-Q100 qualified - select dedicated automotive variants for vehicle applications.
