MK20DX256VLK7R528 - 72MHz Cortex-M4 MCU 256KB Flash LQFP-80
MPN： MK20DX256VLK7R528 ✓ 啟用中MK20DX256VLK7R528 概覽
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripheral interfaces into one package. ARM Cortex-M4 cores implement the Thumb-2 instruction set and include a hardware single-precision FPU and DSP extensions, placing the K20 family in the mid-performance tier of the Kinetis portfolio: ARM Cortex-M0+ (Kinetis L) -> Cortex-M4 (Kinetis K) -> Cortex-M7 (Kinetis K high-performance). MCUs sit below microprocessors in capability but above discrete digital ICs in integration.
Key features of the MK20DX256VLK7R528 include USB 2.0 Full-Speed with OTG, a 16-bit ADC with up to 24 channels, low-power Run/Wait/Stop/VLPR/VLPS modes, and a wide operating voltage range suitable for battery-powered designs. The integrated FPU accelerates floating-point math, and the 72 MHz system clock provides sufficient throughput for sensor fusion, motor control, and Human-Machine Interface (HMI) tasks.
The K20 family uses a Cortex-M4 core with single-cycle MAC and a hardware FPU, paired with NXP's low-leakage process technology and an integrated LDO/voltage regulator for the core supply. Communication peripherals include USB, UART, SPI, I2C, and I2S, while timers support PWM, capture, and quadrature decoding for motor and encoder feedback.
Typical applications include USB HID peripherals (mouse, keyboard, game controllers), industrial sensor hubs, low-power IoT edge nodes, consumer health devices, and HMI touch interfaces. The combination of USB and low-power operation makes the K20 well-suited for tethered and untethered battery-powered products. When designing with this part, populate all VDD/VSS pin pairs even if not all peripherals are used, follow the recommended 0.1 uF decoupling capacitor placement adjacent to each supply pin, and verify JTAG/SWD pin assignments against the package variant.
直接替換替代品，適用於 MK20DX256VLK7R528 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： MK20DX256VLK7R528 （相同外形與佔位） — 差異在於 ADC, Package, Operating Temperature, Communication Peripherals, Core.
MK20DX256VLK7
✅ 直接替換📋 參考替代品（不在目錄中）
MK20DX256VLK7R
✅ 直接替換📋 參考替代品（不在目錄中）
MK22FN1M0AVLK12
✅ 直接替換聯絡詢價
查看資料表 →MK22FN1M0AVLK12R
✅ 直接替換聯絡詢價
查看資料表 →MK22FX512AVLK12
✅ 直接替換聯絡詢價
查看資料表 →MKV30F64VLF10
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MK20DX256VLK7R528 最大額定值與電氣特性
| Core Architecture | ARM Cortex-M4 with FPU |
| 最大時脈頻率 | 72 MHz |
| Program Memory (Flash) | 256 KB (256K x 8) |
| RAM | 32 KB |
| 封裝 | 80-LQFP (LFQFP), 12x12 mm |
| 安裝類型 | Surface Mount |
| 工作溫度 | -40C to +105C |
| 供應電壓 | 1.71 V to 3.6 V |
| USB Interface | USB 2.0 Full-Speed Device/Host/OTG |
| ADC | 16-bit SAR, up to 24 single-ended channels |
| Communication Peripherals | UART, SPI, I2C, I2S, USB |
| Timers | Multiple FTM, PIT, RTC, LPTMR |
| 資料匯流排寬度 | 32-bit |
| MSL 等級 | 3 (168 hours) |
| RoHS 狀態 | Compliant |
MK20DX256VLK7R528 80-lqfp (lfqfp), 12x12 mm 腳位配置指南
MK20DX256VLK7R528（80-lqfp (lfqfp), 12x12 mm 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： MK20DX256VLK7R528.
請參閱 資料表 以查看完整腳位配置。
典型應用
MK20DX256VLK7R528 適用於 7 應用s: USB HID Peripheral Devices, Industrial Sensor Hub, Low-Power IoT Edge Node, Consumer Health and Fitness Device, Touch HMI Control Panel, Motor Control and BLDC Driver, Smart Home Sensor and Bridge.
USB HID Peripheral Devices
The MK20DX256VLK7R528's integrated USB 2.0 Full-Speed controller with OTG support and 16 hardware endpoints makes it ideal for USB HID peripherals such as keyboards, mice, game controllers, and presentation remotes. The Cortex-M4 core at 72 MHz provides responsive HID report processing, while 256 KB Flash accommodates USB stack plus application code. Placed as the central MCU, the part handles USB enumeration, report generation, and device-side I/O.
推薦
Industrial Sensor Hub
The MK20DX256VLK7R528 integrates a 16-bit SAR ADC with up to 24 channels and multiple UART/SPI/I2C interfaces for aggregating sensor data from industrial sensor hubs. The Cortex-M4 with DSP extensions accelerates FFT and digital filtering on raw sensor streams. Operating from 1.71 V to 3.6 V and -40C to +105C, it tolerates factory floor conditions. The 32 KB SRAM buffers multi-sensor data before forwarding over USB or UART.
推薦
Low-Power IoT Edge Node
With multiple low-power modes (Wait, Stop, VLPR, VLPS), the MK20DX256VLK7R528 suits battery-powered IoT edge nodes that spend most of their time in deep sleep and wake periodically for sensor sampling. The Cortex-M4 runs at 72 MHz, fast enough to process local sensor fusion before transmitting over Bluetooth, Zigbee, or LoRa companion radios. The integrated LDO reduces external power component count for compact wearables.
推薦
Consumer Health and Fitness Device
The MK20DX256VLK7R528 supports consumer health and fitness devices including heart-rate monitors, blood-pressure cuffs, and pedometers that need 16-bit ADC precision for analog front-end conditioning and Cortex-M4 DSP for heart-rate variability calculation. USB Full-Speed allows data upload to a host computer without external bridge chips. Low-power Run and Wait modes extend battery life across weeks of use.
推薦
Touch HMI Control Panel
The MK20DX256VLK7R528's combination of 16-bit ADC (for touch sensing via TSI), GPIO for LEDs and segment displays, and 72 MHz Cortex-M4 with FPU is well suited for touch HMI panels on appliances and industrial equipment. The MCU drives LED/LCD segment displays, scans touch electrodes, and runs local UI logic. With 256 KB Flash and 32 KB SRAM, it handles rich UI state machines and touch gesture libraries.
推薦
Motor Control and BLDC Driver
The MK20DX256VLK7R528 includes FlexTimer (FTM) modules capable of complementary PWM outputs with dead-time insertion, hardware quadrature decode for encoder feedback, and ADC synchronization for current sensing. This makes it suitable for low-voltage BLDC, stepper, and DC motor control in 3D printers, fans, and small appliances. The Cortex-M4's single-cycle MAC and FPU accelerate field-oriented control (FOC) loops.
推薦
Smart Home Sensor and Bridge
Smart home sensors and bridges using the MK20DX256VLK7R528 can leverage USB for local configuration, the 16-bit ADC for environmental sensing, and multiple low-power serial interfaces for wireless module connectivity. The MCU aggregates data from Zigbee, Thread, or BLE companion modules and presents a unified interface via USB or Wi-Fi. Low-power Stop/VLPS modes keep standby current in the microamp range.
推薦
推薦產品摘要
工程參考資料，適用於 MK20DX256VLK7R528 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MK20DX256VLK7 | MK20DX256VLK7R | MK22FN1M0AVLK12 | MK22FX512AVLK12 |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 80-LQFP (LFQFP), 12x12 mm | 80-LQFP (LFQFP), 12x12 mm - same | 80-LQFP (LFQFP), 12x12 mm - same | 80-LQFP (LFQFP), 12x12 mm - same | 80-LQFP (LFQFP), 12x12 mm - same |
| Core Architecture | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU |
| Maximum Clock Frequency | 72 MHz | 72 MHz | 72 MHz | 120 MHz | 120 MHz |
| Flash Memory | 256 KB | 256 KB | 256 KB | 1 MB | 512 KB |
| SRAM | 32 KB | 32 KB | 32 KB | 128 KB | 64 KB |
| USB Interface | USB 2.0 FS Device/Host/OTG | USB 2.0 FS Device/Host/OTG | USB 2.0 FS Device/Host/OTG | USB 2.0 FS Device/Host/OTG | USB 2.0 FS Device/Host/OTG |
| ADC | 16-bit SAR, up to 24 channels | 16-bit SAR, up to 24 channels | 16-bit SAR, up to 24 channels | 16-bit SAR, up to 32 channels | 16-bit SAR, up to 28 channels |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| Supply Voltage | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V |
主要差異化特點
- Integrated USB 2.0 Full-Speed with OTG in same LQFP-80 footprint (對比MKV30F64VLF10 (LQFP-48))
- Tape & Reel packaging carrier R528 versus tray (對比MK20DX256VLK7 (Tray))
- Lower 72 MHz core clock at lower power (對比MK22FN1M0AVLK12 (120 MHz))
- 256 KB Flash matches typical USB HID firmware footprint (對比MK22FX512AVLK12 (512 KB))
設計說明
Estimated: Decoupling capacitor placement is critical for the MK20DX256VLK7R528. Place a 0.1 uF ceramic decoupling capacitor adjacent to every VDD/VSS pin pair on the 80-LQFP package. For the USB VBUS pin, add a 4.7 uF bulk capacitor plus ESD protection diode (such as USBLC6-2SC6) to meet USB 2.0 FS inrush and ESD requirements.
The MK20DX256VLK7R528's power dissipation at 72 MHz running typical Cortex-M4 instructions is approximately 80 mW to 150 mW. The 80-LQFP package has theta_JA of approximately 60 C/W on a standard 2-layer JEDEC test PCB, allowing operation across the -40C to +105C industrial range without external heatsinking. Estimated values; verify against the K20 datasheet for final design.
Do not leave unused GPIO pins floating on the MK20DX256VLK7R528 - configure them as outputs driven low or enable internal pull-up/down resistors to avoid excess current draw in low-power modes. Also ensure JTAG/SWD pins (SWDIO, SWCLK, RESET_b) are not repurposed without disabling the debug interface in the SIM register.
Keep the 32.4 MHz external crystal traces short and symmetric, with a guard ground around the crystal load capacitors to minimize EMI coupling. Place the crystal within 1 cm of the XTAL pins. For USB designs, route the USB D+/D- traces as a 90-ohm differential pair with matched lengths and keep them away from noisy switching traces.
合規資訊
RoHS and REACH compliant per NXP product page. Not AEC-Q100 qualified - for automotive applications consider NXP automotive-grade KEA or S32K families. Halogen-free per JEDEC JS709B.
