MPC8535BVJANGA - PowerQUICC III SoC MPU 800MHz e500 | NXP
MPN： MPC8535BVJANGA ✗ 停產MPC8535BVJANGA 概覽
A communications SoC MPU like the MPC8535BVJANGA belongs to the broader category of integrated microprocessors (MPUs), which are single-chip computing platforms that combine one or more processor cores, memory controllers and on-chip peripherals. In the system hierarchy it sits above discrete microcontrollers by integrating northbridge-class memory and I/O subsystems, and below dedicated ASICs by remaining programmable through firmware and operating-system stacks such as VxWorks, Linux and Green Hills INTEGRITY.
Key specifications include a 32-bit e500 core with double-precision FPU, 32 KB/32 KB L1 instruction/data caches, integrated L2 cache up to 256 KB, a 64-bit DDR2/DDR3 SDRAM controller with ECC, four Gigabit Ethernet MACs (two SGMII, two RGMII) plus a 10/100 MAC, two PCI/PCI-X interfaces, one PCI Express x4 (configurable as four x1 lanes) and a SATA host controller. Other features include a USB 2.0 device/host PHY, SDHC, SPI, DUART, I2C and enhanced local bus.
The architecture leverages a system-on-chip interconnect that allows concurrent DMA and packet processing without burdening the e500 core. Hardware acceleration blocks for table lookup, CRC and queue management offload typical datapath tasks, leaving the core available for control-plane and management software.
Typical application areas are industrial Ethernet routers and switches, network-attached storage controllers, secure gateways, wireless infrastructure baseband cards and factory-automation controllers requiring deterministic networking with deterministic memory latency.
When designing with the MPC8535BVJANGA, ensure a 6-layer minimum PCB with dedicated power and ground planes for the FCBGA, follow NXP's reference-design DDR3 termination and routing guidance, and provision for a JTAG/COP header for code debug. The 0C-to-105C industrial temperature grade simplifies thermal design for convection-cooled enclosures.
This page consolidates distributor stock, drop-in alternatives within the same 783-FCBGA footprint, and engineering guidance that goes beyond the manufacturer product page.
直接替換替代品，適用於 MPC8535BVJANGA — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： MPC8535BVJANGA （相同外形與佔位） — 差異在於 RoHS Status, Core Architecture, Data Bus Width, Series, Operating Temperature.
MPC8535AVTANGA
✅ 直接替換聯絡詢價
查看資料表 →MPC8535AVJANGA
✅ 直接替換聯絡詢價
查看資料表 →MPC8535EVJANGA
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
MPC8536CVJAULA
✅ 直接替換📋 參考替代品（不在目錄中）
MPC8544VJALFA
✅ 直接替換📋 參考替代品（不在目錄中）
MPC8535BVJANGA 最大額定值與電氣特性
| Series | PowerQUICC III (MPC8535E) |
| Core Architecture | Power Architecture e500 |
| Core Count | 1 |
| 資料匯流排寬度 | 32-bit |
| Processor Speed | 800 MHz |
| Memory Controller | DDR2 / DDR3 with ECC (64-bit) |
| L1 Cache (I/D) | 32 KB / 32 KB |
| L2 Cache | Up to 256 KB |
| Ethernet MACs | 4x GbE (2x SGMII + 2x RGMII) + 1x 10/100 |
| PCI / PCI-X | 2 ports |
| PCI Express | 1 x4 or 4 x1 lanes |
| SATA | 1 host port (SATA 1.0a) |
| USB | USB 2.0 Device + Host |
| SDHC | 1 port |
| SPI / I2C / DUART | Yes |
| 工作溫度 | 0C to 105C (industrial) |
| 封裝 | 783-FCBGA (29 mm x 29 mm) |
| 安裝類型 | Surface Mount (BGA) |
| RoHS 狀態 | Compliant (per distributor listing context) |
MPC8535BVJANGA 783-fcbga (29 mm x 29 mm) 腳位配置指南
MPC8535BVJANGA（783-fcbga (29 mm x 29 mm) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： MPC8535BVJANGA.
請參閱 資料表 以查看完整腳位配置。
典型應用
MPC8535BVJANGA 適用於 6 應用s: Industrial Ethernet Routers and Switches, Network-Attached Storage (NAS) Controllers, Secure Gateways and VPN Appliances, Wireless Infrastructure Baseband Cards, Factory Automation Controllers, Industrial Printer and Imaging Controllers.
Industrial Ethernet Routers and Switches
The MPC8535BVJANGA fits industrial Ethernet routers and switches because its four integrated Gigabit Ethernet MACs (two SGMII plus two RGMII) and 10/100 MAC allow direct connection to copper and SFP-based PHYs without an external switch fabric. The 800 MHz e500 core plus hardware-accelerated queue management handle IPv4/IPv6 forwarding, QoS classification and ACL processing at wire speed. The 0C-to-105C industrial temperature grade enables convection-cooled DIN-rail enclosures. Designers typically pair the part with DDR3 ECC memory for routing-table integrity and use the SERDES lanes for stacking uplinks.
推薦
Network-Attached Storage (NAS) Controllers
NAS controllers rely on the MPC8535BVJANGA's combination of SATA host, Gigabit Ethernet and DDR3 with ECC. The integrated SATA port plus PCI Express lanes enable attachment of multiple drive bays via port multipliers or SAS expanders, while the four GbE MACs support bonding, link aggregation and 10 GbE uplinks through an external PHY. ECC memory protects metadata and journaling. Reference designs from NXP and third-party ODMs use the part for 4-to-8 bay SOHO and SMB NAS solutions, often running Linux or VxWorks NAS firmware.
推薦
Secure Gateways and VPN Appliances
Secure gateways benefit from the MPC8535BVJANGA's 800 MHz e500 core (with double-precision FPU) performing IPsec, SSL and deep-packet inspection alongside the hardware queue/CRC engines. The integrated GbE MACs allow WAN/LAN/DMZ segmentation without external switch chips, while DDR3 with ECC secures cryptographic keys and route tables. The 0C-to-105C temperature rating suits unventilated telecom closets. Designers typically add a TPM and external secure element over I2C or SPI to harden the boot chain.
推薦
Wireless Infrastructure Baseband Cards
Baseband cards for small-cell and fixed-wireless access use the MPC8535BVJANGA's combination of SERDES, DDR3 and PCI Express to handle MAC-layer processing and backhaul. The e500 core plus on-chip accelerators offload ciphering, scheduling and modulation tasks. Multiple GbE MACs and a SGMII interface provide fronthaul/backhaul Ethernet connectivity. Industrial temperature grading suits outdoor shelter equipment. Reference NXP designs demonstrate LTE small-cell implementations around the MPC8535E family.
推薦
Factory Automation Controllers
Factory automation controllers - programmable logic controllers, motion controllers and protocol gateways - use the MPC8535BVJANGA's combination of GbE, USB, SDHC and PCI for deterministic Ethernet and fieldbus bridging. The 800 MHz e500 core executes real-time operating systems (RTOS) and PLC logic while the integrated FPU accelerates motion-control math. The 0C-to-105C industrial temperature rating handles cabinet environments without active cooling, and ECC DDR3 prevents random-bit corruption that could cause downtime on the factory floor.
推薦
Industrial Printer and Imaging Controllers
Industrial printer and imaging controllers use the MPC8535BVJANGA's PCI Express, USB 2.0 host, SATA and GbE for high-speed page image processing, scanner input and networked output. The 800 MHz e500 plus hardware CRC engines accelerate rasterization pipelines, while DDR3 with ECC handles large page buffers. SDHC and SPI boot options simplify secure-boot designs. The 0C-to-105C temperature grade supports industrial print cabinets without fans. Reference designs from NXP show typical multi-function-printer control boards built around this part.
推薦
推薦產品摘要
工程參考資料，適用於 MPC8535BVJANGA — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MPC8535AVTANGA | MPC8535AVJANGA | MPC8535EVJANGA | MPC8536CVJAULA | MPC8544VJALFA |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCBGA (29x29) | 783-FCBGA (29x29) | 783-FCBGA (29x29) | 783-FCBGA (29x29) | 783-FCBGA (29x29) | 783-FCBGA (29x29) |
| Core Architecture | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 |
| Core Speed | 800 MHz | ~1 GHz | ~1 GHz | 800 MHz | ~1.0-1.5 GHz (family range) | ~1.0-1.2 GHz (family range) |
| Memory Controller | DDR2/DDR3 with ECC (64-bit) | DDR2/DDR3 with ECC (64-bit) | DDR2/DDR3 with ECC (64-bit) | DDR2/DDR3 with ECC (64-bit) | DDR3 with ECC (64-bit) | DDR2/DDR3 with ECC (64-bit) |
| Gigabit Ethernet MACs | 4x GbE (2x SGMII + 2x RGMII) + 1x 10/100 | 4x GbE + 1x 10/100 (same family) | 4x GbE + 1x 10/100 (same family) | 4x GbE + 1x 10/100 | 4x GbE + 1x 10/100 (variant) | 4x GbE (variant mix) |
| PCI Express | 1 x4 or 4 x1 lanes | 1 x4 or 4 x1 lanes | 1 x4 or 4 x1 lanes | 1 x4 or 4 x1 lanes | 1 x4 or 4 x1 lanes | 1 x4 or 4 x1 lanes |
| Operating Temperature | 0C to 105C (industrial) | 0C to 105C (industrial) | 0C to 105C (industrial) | 0C to 105C (industrial) | -40C to 105C (extended) | -40C to 105C (extended) |
| Lifecycle Status | End of Life (NXP) | End of Life (NXP) | End of Life (NXP) | End of Life (NXP) | End of Life (NXP) | End of Life (NXP) |
| RoHS Status | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant |
主要差異化特點
- Industrial temperature grade with end-of-life product longevity through authorized aftermarket (對比MPC8535AVTANGA)
- Same Package, enhanced peripheral family option via MPC8536 (對比MPC8536CVJAULA)
- DDR2/DDR3 controller with ECC for reliable memory subsystem (對比MPC8544VJALFA)
設計說明
The 783-FCBGA (29x29) package requires at least a 6-layer PCB with dedicated power and ground planes, microvia escape under the BGA, and a controlled-impedance stack-up for DDR3 (typically 50 ohm single-ended and 100 ohm differential for SERDES). Follow the NXP hardware reference manual for trace length matching between the DDR3 controller and the memory devices; mismatched lengths will cause bit errors at 800 MHz clock. Use the NXP reference layout as a starting point and verify with field-solver simulation before tape-out.
The MPC8535BVJANGA uses an FCBGA package with a thermal lid; thermal dissipation depends on the PCB copper area under the package and any thermal vias to inner/outer planes. For the 0C-to-105C industrial grade, keep junction temperature below 105C under worst-case ambient. Estimated: with 1 oz copper and a 2-layer PCB, theta_JA is roughly 18-22 C/W; spreading that across a 4-layer PCB drops theta_JA below 8 C/W. Use the NXP thermal model to validate the design.
Do not confuse the MPC8535BVJANGA (industrial 0C-to-105C, 800 MHz) with other speed or temperature grades in the same family. Pinout variants exist between 'AJ'/BJ'/BVJ suffixes; only MPC8535BVJANGA matches the requested combination of 800 MHz and industrial temperature. Always confirm the full NXP part number on the datasheet cover page when ordering. EOL parts are also frequent counterfeit targets - source from authorized distributors or traceable aftermarket partners such as Rochester Electronics.
SERDES routing for SGMII and PCI Express requires careful impedance control (typically 85 ohm differential) and length matching within intra-pair and inter-pair tolerances from the NXP IBIS model. Keep SERDES traces on the top or signal layers, reference to a continuous ground plane, and place AC-coupling capacitors close to the SERDES balls. Use the NXP reference clock jitter budget and the datasheet SERDES reference design as the foundation, then verify with lab measurements on the prototype board.
Plan for separate voltage rails: core voltage, DDR I/O voltage, SERDES voltage, and GPIO voltage, each with their own decoupling capacitor bank. Follow the NXP power-design checklist for sequencing - improper order can latch the device. Use the NXP evaluation board as a reference for bulk-cap placement; bulk capacitors should be within the current-return loop of each rail.
合規資訊
RoHS compliance per distributor listings and NXP product page. AEC-Q100 not applicable - this is an industrial/communications MPU, not an automotive-grade part. For long-term supply beyond EOL, contact NXP for a recommended successor from the QorIQ family.
