MSP430P325IPG - 16-Bit 8MHz Mixed-Signal MCU | TI
MPN: MSP430P325IPG ✓ 啟用中MSP430P325IPG 概覽
A mixed-signal microcontroller combines a digital processor with analog and display peripherals on one integrated circuit. In the product hierarchy, the MSP430P325IPG is an MCU, a microcontroller, and a mixed-signal semiconductor. Its 16-bit RISC architecture supports efficient embedded control, while the ADC enables direct acquisition of analog sensor signals without requiring a separate converter. The integrated LCD interface supports segmented display applications.
The device includes 16 KB of one-time-programmable memory and 512 bytes of RAM. Its clock performance is specified at 8 MHz, with a 300 ns instruction-cycle figure also listed for the MSP430 family device. The integrated conversion interface provides a 14-bit ADC, while the display section supports 84 segments. These resources allow firmware, measurement, control, and user-interface functions to share one compact package.
Power efficiency is a central design feature of the MSP430 architecture. The MSP430P325IPG operates from a low supply voltage range identified as 3.3 V or 5 V, with a 5.5 V maximum supply identified for the device family. Five power-saving modes are listed, and standby-mode current can fall to 0.1 mA under the cited conditions. A low-power operating current is also identified at 1 MHz and 3 V.
Typical applications include industrial panel meters, portable measurement instruments, battery-powered data loggers, keypad-and-display controllers, and compact sensor-conditioning systems. The 84-segment LCD capability is particularly useful for numerical or graphical instruments, while the 14-bit ADC supports analog inputs such as temperature, pressure, potentiometer, and resistive-bridge measurements.
PCB design should preserve the package power, ground, analog-input, LCD-segment, clock, and programming connections shown in the manufacturer pin-description table. Place analog and digital return paths carefully, provide the required bypass capacitance at the supply pins, and route the LCD segment outputs away from sensitive analog inputs. The 64-pin PQFP footprint also requires adequate assembly clearances for its leads and underside.
This page consolidates the device identity, electrical parameters, package information, application guidance, sourcing workflow, and engineering design considerations. It is intended to help engineers determine whether the MSP430P325IPG provides the required memory, conversion, display, speed, and low-power characteristics before beginning a board-level design.
直接替換替代品,適用於 MSP430P325IPG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
MSP430P325EPG
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MSP430P325IPG
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MSP430P325IPG 最大額定值與電氣特性
| CPU Architecture | 16-bit RISC |
| 最大時脈頻率 | 8 MHz |
| Program Memory | 16 KB OTP (16K x 8) |
| RAM | 512 bytes |
| ADC Resolution | 14 bits |
| LCD Drive Capability | 84 segments |
| 供應電壓 | 3.3 V or 5 V |
| Maximum Supply Voltage | 5.5 V |
| Standby Current | Down to 0.1 mA |
| Power-Saving Modes | 5 modes |
| Instruction Cycle | 300 ns |
| Package Type | 64-pin PQFP |
| Package Dimensions | 14 mm x 20 mm |
| 安裝類型 | Surface mount |
MSP430P325IPG 14 mm x 20 mm 腳位配置指南
MSP430P325IPG(14 mm x 20 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: MSP430P325IPG.
請參閱 資料表 以查看完整腳位配置。
典型應用
MSP430P325IPG 適用於 6 應用s: Industrial Panel Meter, Portable Data Logger, Battery-Powered Meter, Keypad and Segment Display Controller, Temperature and Pressure Instrument, Embedded Sensor Controller.
Industrial Panel Meter
The MSP430P325IPG fits an industrial panel meter because it combines a 16-bit CPU running at up to 8 MHz with a 14-bit ADC and an 84-segment LCD driver. The converter can acquire conditioned signals from resistive or voltage-based sensors, while the display interface presents measurements and status information without a separate LCD controller. Its 16 KB OTP program memory and 512-byte RAM support compact embedded control and data processing. Use the 3.3 V or 5 V operating range to match the instrument architecture and review the 5.5 V maximum supply during power-supply design.
Portable Data Logger
The MSP430P325IPG is appropriate for a portable data logger that must balance processing capability with low standby consumption. The 16-bit RISC CPU can perform sampling, scaling, and control tasks at up to 8 MHz, while the 14-bit ADC supports analog sensor acquisition. Five power-saving modes and standby current down to 0.1 mA help reduce energy use between measurement events. The 16 KB OTP and 512-byte RAM are best suited to focused logging functions, so applications requiring large onboard data buffers should assess their storage requirements before finalizing the design.
Battery-Powered Meter
A battery-powered meter can use the MSP430P325IPG to consolidate measurement, processing, and user display functions. Its 14-bit ADC supports precision-oriented analog acquisition, while the 84-segment LCD capability suits a compact numerical display. The device’s five power-saving modes and standby operation down to 0.1 mA are important for preserving battery life between measurements. Designers should select the appropriate operating mode, clock configuration, LCD loading, and external load-switch strategy, since actual battery consumption also depends on the sensor, display, and power-management components around the MCU.
Keypad and Segment Display Controller
The MSP430P325IPG is well matched to keypad-and-segment-display products requiring an integrated controller and mixed-signal capability. The 16-bit CPU can scan inputs, debounce controls, update an 84-segment LCD, and manage peripheral functions in one firmware design. Its 512 bytes of RAM supports working variables and stack operations, while 16 KB of OTP provides permanent storage for application code. The design should use the manufacturer pin-description table to assign segment outputs and follow the recommended bypass and grounding layout to prevent display activity from degrading sensitive analog measurements.
Temperature and Pressure Instrument
The MSP430P325IPG suits compact temperature or pressure instruments where analog conditioning, control logic, and a local LCD are needed. A 14-bit ADC can digitize the output of a bridge or ratiometric sensor after appropriate amplification and filtering, while the MCU performs calibration, linearization, and display updates. The 84-segment LCD driver supports readable numeric or segmented indications. Use stable references and careful analog layout for repeatable measurements, and confirm that the sensor bandwidth and required sampling rate remain appropriate for the 8 MHz device.
Embedded Sensor Controller
The MSP430P325IPG can act as the central controller in a compact sensor node that must acquire analog measurements and maintain low standby demand. The integrated 14-bit ADC reduces the need for a separate converter in suitable low-frequency measurement systems, while the 16-bit RISC CPU handles conditioning, thresholds, and control logic. Five low-power modes and standby current down to 0.1 mA support duty-cycled operation. The 512-byte RAM is modest, so streaming protocols or large sample buffers may require external storage or a different MCU architecture.
工程參考資料,適用於 MSP430P325IPG — 比較、設計指引及合規資訊。
選型指南
設計說明
Design the supply path for the MSP430P325IPG’s 3.3 V or 5 V operating range and do not exceed the identified 5.5 V maximum. Place the required bypass capacitors close to the supply and ground pins, and account for startup, noise, and external load transients. For battery-powered products, use the five available power-saving modes deliberately and measure current with the LCD, ADC, oscillator, and unused peripherals in their intended states.
Use the Texas Instruments MSP430P325 datasheet pin-description table when assigning the 64-pin PQFP footprint. Keep analog inputs and their conditioning components away from LCD segment outputs, switching-node connections, and fast digital return paths. Continuous ground-plane distribution and short supply connections help reduce coupling between the 14-bit ADC, the 84-segment display interface, and the digital CPU. Confirm pin orientation against the package drawing before creating the PCB footprint.
Do not treat a MCU with similar ADC or LCD features as a drop-in replacement. The MSP430P325IPG combines a 16 KB OTP program area, 512-byte RAM, 8 MHz CPU operation, a 14-bit ADC, 84-segment LCD drive, and a 64-pin PQFP package. A replacement also needs a compatible pin arrangement, memory map, interrupt behavior, and LCD connection. Make programming and validation fixtures capable of programming the one-time-programmable memory only after the firmware image has been fully reviewed.
合規資訊
Compliance declarations were not identified in the product records and remain unconfirmed.