PCM3006T/2K - 16-Bit Stereo Audio Codec | Texas Instruments
MPN: PCM3006T/2K ✓ 啟用中PCM3006T/2K 概覽
An audio codec is a mixed-signal integrated circuit that combines ADC and DAC functions with the digital interface needed to exchange audio samples with a host processor. The PCM3006T/2K belongs to the broader hierarchy of audio codec, audio interface IC, mixed-signal semiconductor, and interface integrated circuit. Its single-ended inputs and outputs simplify connection to line-level analog circuitry without requiring balanced audio channels.
Key documented characteristics include 16-bit conversion resolution, a stereo 2-ADC/2-DAC arrangement, and single-ended analog signal paths. The 24-SSOP package supports compact surface-mount layouts, while the tape-and-reel ordering option suits automated assembly. The /2K suffix identifies the specific Texas Instruments orderable configuration and should be retained when comparing replacements or issuing procurement requests.
Technically, the PCM3006T/2K separates analog conversion from digital sample transport. Two ADC channels provide the digital audio data path from the analog input stage, while two DAC channels reconstruct stereo audio from digital samples received through the serial interface. This integrated arrangement reduces the number of discrete converters normally required for a stereo signal chain and keeps analog input, conversion, and output functions in one component.
Typical uses include consumer audio equipment, portable media systems, digital recording products, and embedded audio subsystems in which a 16-bit stereo codec with single-ended I/O is sufficient. The part can also sit between an analog audio front end and a digital audio processor, allowing the host to perform decoding, mixing, storage, or communication while the codec handles analog-to-digital and digital-to-analog conversion.
Designers should confirm the interface timing, analog signal levels, clocking, and required external support circuitry against the manufacturer datasheet before layout. Keep analog and digital return paths well controlled, place input and output capacitors near their associated pins, and route the exposed signal paths away from switching nodes. The 24-SSOP footprint is relatively narrow, so adequate escape routing and assembly clearances are important.
This product summary combines the exact orderable MPN, package information, codec configuration, verified distributor listings, replacement analysis, and application-oriented engineering guidance. It is designed to help engineers identify the correct audio converter and prepare a source request without relying on ambiguous family-level descriptions.
直接替換替代品,適用於 PCM3006T/2K — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PCM3006T/2K (相同外形與佔位) — 差異在於 Digital Audio Interface, Package, Product Type.
PCM3006T
✅ 直接替換聯絡詢價
查看資料表 →PCM3006T/2KG6
✅ 直接替換📋 參考替代品(不在目錄中)
PCM3006T/2K 規格
| Product Type | Stereo audio codec |
| Converter Resolution | 16 bit |
| ADC Channels | 2 |
| DAC Channels | 2 |
| Analog Input Type | Single-ended |
| Analog Output Type | Single-ended |
| Digital Audio Interface | Serial |
| 封裝 | 24-pin SSOP |
| 安裝類型 | Surface mount |
| Shipping Format | Tape and reel |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
PCM3006T/2K 24-pin ssop 腳位配置指南
PCM3006T/2K(24-pin ssop 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: PCM3006T/2K.
請參閱 資料表 以查看完整腳位配置。
典型應用
PCM3006T/2K 適用於 6 應用s: Stereo Line-Level Audio Interface, Portable Media Player, Digital Audio Recording Product, Consumer Audio Equipment, Industrial Audio Control Module, Communication and Conferencing Audio.
Stereo Line-Level Audio Interface
The PCM3006T/2K fits a stereo line-level interface because it combines 2 ADC channels, 2 DAC channels, and 16-bit conversion in one 24-pin SSOP device. A host processor can receive digital samples from the single-ended analog inputs, process them, and return playback audio for conversion through the two single-ended DAC outputs. This integration reduces the number of separate converter packages and keeps the audio signal path compact. The main design consideration is matching input and output levels so the converters operate within their specified ranges without external clipping or excessive attenuation.
推薦
Portable Media Player
PCM3006T/2K is suitable for portable media systems that require two analog channels for recording and playback in a compact surface-mount design. Its 16-bit stereo conversion supports a straightforward digital-audio architecture in which analog input is sampled, stored or processed, and later reconstructed through the DAC outputs. The 24-pin SSOP package reduces occupied board area compared with separate ADC and IC packages. Designers should prioritize low-noise supply routing, stable clocking, and short analog traces to preserve performance in a compact, potentially mobile enclosure.
推薦
Digital Audio Recording Product
The PCM3006T/2K can serve as the stereo conversion stage in a digital recorder by digitizing two single-ended analog inputs through its ADC channels. The resulting 16-bit samples can be routed to a storage or communications processor, while the DAC channels support monitoring or line playback. Integrating both converter directions in one codec reduces board partitioning and simplifies firmware control. For reliable recording, use the manufacturer timing diagrams to configure the serial interface and verify input range, clock stability, and grounding before the capture path is enabled.
推薦
Consumer Audio Equipment
PCM3006T/2K provides a compact stereo conversion function for consumer equipment with both input and playback requirements. Two ADC channels can capture left and right analog sources, while two DAC channels produce corresponding analog playback signals through the serial digital interface. The 16-bit resolution and integrated 2-ADC/2-DAC arrangement align with cost-conscious audio products that do not require balanced channels. Designers should account for the 24-pin SSOP footprint, route analog signals away from digital clock lines, and confirm output filtering requirements in the manufacturer application guidance.
推薦
Industrial Audio Control Module
The PCM3006T/2K can support an industrial audio-control module that accepts analog monitoring signals and provides analog playback through a digital processor. Its 2-ADC and 2-DAC topology handles stereo monitoring in a compact module, while the serial interface allows the controller to exchange samples over a controlled digital bus. The 24-SSOP package supports standard surface-mount assembly but leaves little routing flexibility, so component placement, analog-ground partitioning, and clock-routing discipline are critical. Confirm environmental and supply requirements against the manufacturer documentation before deploying the codec in industrial equipment.
推薦
Communication and Conferencing Audio
PCM3006T/2K is applicable to communication equipment requiring local stereo capture and playback. A conferencing terminal can digitize microphone or line-level sources through the ADC channels, process or packetize the 16-bit samples, and reconstruct monitoring audio through the DAC outputs. The integrated codec reduces external converter count while the SSOP package helps maintain a compact terminal layout. Because communications systems can mix fast digital activity with sensitive analog signals, isolate codec ground currents, keep clock routing short, and validate the complete audio path for echo and noise margin.
推薦
推薦產品摘要
工程參考資料,適用於 PCM3006T/2K — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PCM3006T | PCM3006T/2KG6 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 24-SSOP | 24-SSOP | 24-SSOP |
| Product Type | Stereo audio codec | Stereo audio interface | 16-bit single-ended stereo audio codec |
| Converter Resolution | 16 bit | 16 bit | 16 bit |
| ADC Channels | 2 | 2 | 2 |
| DAC Channels | 2 | 2 | 2 |
主要差異化特點
- Exact /2K orderable configuration (對比PCM3006T)
- Integrated stereo capture and playback (對比PCM3006T/2KG6)
- Single-ended analog architecture simplifies integration (對比PCM3006T/2KG6)
設計說明
Route the two analog input channels and two analog output channels as compact, symmetric paths, keeping analog traces away from the serial clock and data lines. Place the associated input and output capacitors adjacent to their associated pins, and terminate unused inputs and outputs according to the manufacturer recommendations. This layout discipline reduces susceptibility to clock coupling, ground-current injection, and channel-to-channel crosstalk in the 24-pin SSOP footprint.
Do not infer the complete pinout or analog signal levels from the PCM3006 family name alone. The visible product information confirms the 16-bit stereo codec configuration and 24-SSOP package, but clock formats, supply limits, control pins, and analog input ranges must be taken from the manufacturer datasheet. Using the wrong control state or serial format can prevent valid samples from transferring even when the analog inputs are correctly connected.
Treat clock, serial data, and serial word-select traces as a related digital interface group and route them away from the analog pins. Use a continuous ground reference beneath and around the device, minimize loop area for return currents, and verify the interface timing against the processor that drives the codec. The 24-pin SSOP has limited spacing, so careful escape routing and assembly-aware placement are important for preserving signal margin.
合規資訊
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified. AEC-Q100 is not applicable to this general-purpose audio codec based on the available product classification.