PIC16F15213-E/P - 8-Bit 32MHz MCU 3.5KB Flash DIP-8 | Microchip
MPN： PIC16F15213-E/P ✓ 啟用中PIC16F15213-E/P 概覽
An 8-bit microcontroller (MCU) is a programmable integrated circuit that uses an 8-bit data path to execute instructions and interface with peripherals. Microcontrollers sit at the heart of embedded systems, hierarchically classified as: microcontroller -> embedded processor -> semiconductor -> integrated circuit. PIC microcontrollers use a modified Harvard RISC architecture, separating program and data buses for deterministic instruction throughput, and are widely deployed where low cost, low power, and ease of programming outweigh raw compute performance.
The PIC16F15213-E/P delivers up to 32 MHz CPU performance from its internal oscillator, eliminating the need for an external crystal in many designs. Peripherals are interconnected through Peripheral Pin Select (PPS), allowing remapping of digital functions to different physical pins and simplifying PCB layout. The eXtreme Low-Power (XLP) Sleep Mode reduces quiescent current to single-digit microamps, enabling long battery life in sensor and IoT end nodes. Functional Safety support and Core Independent Peripherals (CIPs) allow safety-critical logic to be implemented without CPU intervention.
Typical applications include cost-sensitive sensor interfaces, real-time control loops, low-power IoT edge nodes, and consumer appliance controls. The integrated 10-bit ADC, PWM, and EUSART/SPI/I2C interfaces cover most mixed-signal acquisition and actuation tasks. Compared to Cortex-M0 alternatives, the PIC16F15213 consumes less power in sleep mode and offers a smaller code footprint.
When designing with this MCU, place a 0.1 uF decoupling capacitor as close as possible to VDD and consider using the ICSP programming header even for production boards to enable in-field firmware updates. Programming is performed via Microchip's MPLAB X IDE with XC8 compiler support.
直接替換替代品，適用於 PIC16F15213-E/P — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： PIC16F15213-E/P （相同外形與佔位） — 差異在於 Package, Operating Temperature, ADC, Program Memory (Flash), Core Architecture.
PIC16F15213-I/P
✅ 直接替換📋 參考替代品（不在目錄中）
PIC16F15214-I/P
✅ 直接替換聯絡詢價
查看資料表 →PIC16F15213-E/MF
✅ 直接替換聯絡詢價
查看資料表 →PIC16F1509-I/P
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →PIC16F1454-E/P
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →PIC16F15213-E/P 最大額定值與電氣特性
| Manufacturer | Microchip Technology |
| Series | PIC 16F |
| Core Processor | PIC |
| Core Size | 8-Bit |
| CPU Speed | 32 MHz |
| Program Memory Size | 3.5 KB (2K x 14) FLASH |
| RAM Size | 256 B |
| Data EEPROM | 0 B |
| 封裝 | 8-PDIP (through-hole) |
| 腳位數 | 8 |
| ADC | 10-bit |
| PWM Channels | 2 |
| CCP Modules | 2 |
| Communication Peripherals | EUSART, SPI, I2C |
| 工作溫度 | -40C to +125C (extended grade) |
| 安裝類型 | Through-Hole (PDIP) |
| MSL 等級 | 1 (unlimited) |
| RoHS 狀態 | Compliant |
PIC16F15213-E/P 腳位配置
| 腳位 1 | RA5/ICSPDAT — GPIO RA5 / ICSP data line |
| 腳位 2 | RA4/ICSPCLK — GPIO RA4 / ICSP clock line |
| 腳位 3 | RA3/MCLR/VPP — GPIO RA3 / Master Clear reset (active low) / Programming voltage |
| 腳位 4 | VSS — Ground reference |
| 腳位 5 | RC0/AN4 — GPIO RC0 / Analog input channel 4 |
| 腳位 6 | RC1/AN5 — GPIO RC1 / Analog input channel 5 |
| 腳位 7 | RC2/AN6 — GPIO RC2 / Analog input channel 6 |
| 腳位 8 | VDD — Positive supply voltage |
典型應用
PIC16F15213-E/P 適用於 6 應用s: Low-Power IoT Sensor Node, Cost-Sensitive Industrial Sensor Interface, Consumer Appliance Control, Battery Charger Monitor, Hobby and Educational Microcontroller Projects, Automotive Auxiliary Module.
Low-Power IoT Sensor Node
The PIC16F15213-E/P fits low-power IoT sensor nodes through its eXtreme Low-Power (XLP) Sleep Mode that drops current to single-digit microamps, extending coin-cell battery life to years. The 10-bit ADC reads thermistor or analog sensor outputs directly, while EUSART or I2C uplinks readings to a host MCU. With 3.5 KB Flash, firmware fits sensor calibration tables and periodic wake-and-transmit logic.
推薦
Cost-Sensitive Industrial Sensor Interface
The PIC16F15213-E/P serves cost-sensitive industrial sensor interfaces where its 10-bit ADC and PPS flexibility digitize 4-20 mA or 0-10 V signals after external signal conditioning. The extended -40C to +125C temperature grade ensures operation in harsh factory or outdoor enclosures. Two PWM channels drive indicator LEDs or analog outputs, and the EUSART bridges to RS-485 transceivers for industrial networks.
推薦
Consumer Appliance Control
The PIC16F15213-E/P drives consumer appliance controls such as coffee makers, small fans, and kitchen timers where low BOM cost and reliability matter. The integrated PWM generates variable-speed motor control or LED dimming, while the ADC monitors temperature sensors for closed-loop thermal regulation. The 8-pin PDIP through-hole package simplifies hand-assembly and field serviceability for small-volume production.
推薦
Battery Charger Monitor
The PIC16F15213-E/P monitors battery charging by sampling voltage and current dividers via its 10-bit ADC and toggling PWM to regulate charger state. With 256 bytes of RAM, charging profile state machines fit easily. The XLP Sleep Mode minimizes quiescent drain between ADC samples, preserving battery capacity during long storage. PPS routes comparator and PWM to any pin for flexible PCB layout.
推薦
Hobby and Educational Microcontroller Projects
The PIC16F15213-E/P is ideal for hobbyist and educational microcontroller projects due to its breadboard-friendly 8-pin PDIP through-hole package and Microchip's free MPLAB X IDE + XC8 compiler toolchain. The 3.5 KB Flash accommodates typical beginner projects (LED blinking, PWM servo control, UART communication) with room to spare. ICSP programming via two pins enables in-circuit firmware updates without part removal.
推薦
Automotive Auxiliary Module
The PIC16F15213-E/P supports automotive auxiliary modules such as interior LED drivers, simple body controllers, and sensor aggregators where its extended -40C to +125C temperature grade is essential. The Functional Safety (FuSa) capability enables safety-conscious designs. SPI links to companion MCUs or displays, and the watchdog timer plus Core Independent Peripherals (CIPs) reduce CPU overhead for ASIL-class tasks.
推薦
推薦產品摘要
工程參考資料，適用於 PIC16F15213-E/P — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PIC16F15213-I/P | PIC16F15214-I/P | PIC16F15213-E/MF | PIC16F1509-I/P | PIC16F1454-E/P |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-PDIP (through-hole) | 8-PDIP (through-hole) - same | 8-PDIP (through-hole) - same | 8-PDIP per XAIPART database listing | 8-PDIP (through-hole) - same package, different pinout | 8-PDIP (through-hole) - same package, different pinout |
| Core Size | 8-bit | 8-bit | 8-bit | 8-bit | 8-bit | 8-bit |
| CPU Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 20 MHz | 48 MHz |
| Flash Memory | 3.5 KB | 3.5 KB | 7 KB | 3.5 KB | 8 KB | 14 KB |
| RAM | 256 B | 256 B | 512 B | 256 B | 512 B | 1 KB |
| ADC | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit |
| Temperature Grade | Extended (-40C to +125C) | Industrial (-40C to +85C) | Industrial (-40C to +85C) | Extended (-40C to +125C) | Industrial (-40C to +85C) | Extended (-40C to +125C) |
主要差異化特點
- Extended -40C to +125C temperature grade in PDIP-8 (對比PIC16F15213-I/P)
- Functional Safety (FuSa) capability (對比PIC16F1509-I/P)
- Standardized 8-pin PDIP drop-in footprint within the family (對比PIC16F1454-E/P)
設計說明
Power the PIC16F15213-E/P from a clean 1.8V-5.5V rail. Place a 0.1 uF decoupling capacitor within 5 mm of VDD (pin 8) and a 10 uF bulk capacitor near the supply input. For battery-powered designs, use the XLP Sleep Mode (Doze mode off, all peripherals disabled) to achieve typical sleep currents below 1 uA. Use the internal 32 kHz LFINTOSC for periodic wake-up timing instead of the high-frequency oscillator to further reduce active current.
Keep the ICSP programming traces (ICSPDAT on RA5, ICSPCLK on RA4) away from switching signals or analog inputs to avoid programming glitches. Route MCLR/VPP (pin 3) with a 10 kohm pull-up to VDD and a 100 nF capacitor to ground to prevent spurious resets from noise. For 8-pin PDIP layouts, leave access to pins 1 and 2 for the ICSP header even in production designs to enable in-field firmware updates.
Do not leave unused pins floating - configure them as outputs or enable internal weak pull-ups to prevent CMOS input oscillation and excessive current draw. Verify that the MCLR pin never sees voltages above VDD + 0.3V or below VSS - 0.3V, otherwise the device may latch up. When migrating from PIC16F1509 or PIC16F1454 to PIC16F15213, note that the pinout differs even though the package is identical - cross-reference datasheets carefully before PCB swaps.
合規資訊
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - automotive designers should verify Functional Safety (FuSa) documentation per Microchip DS40002195A for safety-critical use cases. Lead-free and halogen-free per Microchip PIC family environmental compliance documentation.
