Microchip Technology

PIC18F442-E/ML - 8-Bit 40MHz 16KB Flash MCU | Microchip

MPN: PIC18F442-E/ML ✓ 啟用中
5 V Vdss 44-pin VQFN, 8 mm x 8 mm, exposed pad Package 40 MHz Speed 16 KB Flash (8K x 16 words) Memory
MOQ: 1 |

PIC18F442-E/ML 概覽

Microchip Technology PIC18F442-E/ML is an enhanced-flash PIC18 8-bit microcontroller operating at up to 40 MHz, with 16 KB of program Flash and 34 I/O pins in a 44-pin VQFN exposed-pad package. It provides 768 bytes of SRAM, 256 bytes of EEPROM, eight 10-bit ADC channels, two capture/compare/PWM modules, SPI, and an I2C-compatible synchronous serial port.

A PIC18 microcontroller is a compact embedded-control IC that combines a processor core, program memory, data memory, peripherals, and general-purpose I/O on one package. The PIC18F442 belongs to the enhanced-flash PIC18 family, combining a RISC-like instruction set with integrated analog and serial peripherals. Its 77-instruction architecture supports 10 MIPS when operating at 40 MHz, making it suitable for compact control systems that require more performance and memory than entry-level 8-bit devices.

Key features include 16 KB of Flash program memory organized as 8K by 16 words, 768 bytes of SRAM, and 256 bytes of EEPROM. The device provides 34 I/O pins, an eight-channel 10-bit analog-to-digital converter, two capture/compare/PWM functions, self-programming, and an ICD interface. The exposed-pad VQFN construction also provides a substantial solderable thermal area for compact industrial-control boards.

The PIC18F442-E/ML uses Microchip's enhanced PIC18 architecture with a 40 MHz operating frequency and 100 ns instruction execution. Its serial peripherals can support three-wire SPI or two-wire I2C operation, while the parallel slave port expands the available I/O options for compatible 40/44-pin devices. The manufacturer describes the family as compatible with earlier PIC16C5X, PIC12CXXX, PIC16CXX, and PIC17CXX devices, which can assist incremental firmware and board-development work.

Typical uses include industrial control panels, sensor acquisition, motor-control interfaces, compact instrumentation, temperature controllers, and embedded products requiring SPI or I2C connectivity. The eight ADC channels support mixed-signal monitoring, while the two capture/compare/PWM modules simplify timing, pulse-width modulation, and basic motor-control functions.

PCB design should preserve the exposed-pad thermal and electrical connection specified by the manufacturer. Place decoupling capacitors close to the supply pins, maintain unobstructed copper beneath the exposed pad, and follow the package land pattern and reflow profile. Because firmware, oscillator configuration, peripheral multiplexing, and legacy port behavior are device-specific, validate the complete design against the manufacturer's PIC18F442 datasheet and development-board documentation.

This page combines the PIC18F442-E/ML technical profile, package and ordering distinctions, drop-in comparisons, application guidance, and practical PCB considerations. It is designed to help engineers identify the correct temperature grade and package suffix, assess compatibility with existing designs, and move directly to the manufacturer's PIC18F442 documentation for authoritative electrical limits and pin assignments.

直接替換替代品,適用於 PIC18F442-E/ML — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: PIC18F442-E/ML (相同外形與佔位) — 差異在於 Package, Capture/Compare/PWM Modules, Instruction Set, Operating Voltage, Serial Interfaces.

Microchip Technology
Package: 44-lead QFN, 8 x 8 mm, exposed pad
Capture/Compare/PWM Modules: 2 modules
Microchip Technology
Package: 44-pin QFN (8x8 mm)
Instruction Set: 77 instructions, 16-bit wide
Operating Voltage: 2.0 V to 5.5 V

PIC18F442-I/ML

✅ 直接替換
Microchip Technology
📦 44-pin VQFN (ML)
8-bit PIC18 flash microcontroller · 40 MHz · 16 KB (8K x 16 words) · 768 bytes · 256 bytes · 34 pins · 10 bits · 8 channels

聯絡詢價

查看資料表 →

PIC18F442T-I/ML

✅ 直接替換 ⚠️ 規格未經驗證
📦 44-pin VQFN (ML)
Temperature and ordering-code characters differ from E/ML while retaining the PIC18F442 core, 16 KB Flash, 40 MHz operation, and 44-pin ML footprint.

📋 參考替代品(不在目錄中)

PIC18F442-E/ML 最大額定值與電氣特性

Device Type 8-bit enhanced-flash PIC microcontroller
Maximum Operating Frequency 40 MHz
Instruction Execution Rate 10 MIPS at 40 MHz
Program Memory 16 KB Flash (8K x 16 words)
Data RAM 768 bytes
EEPROM 256 bytes
General-Purpose I/O 34 pins
Analog-to-Digital Converter 8-channel, 10-bit
Capture/Compare/PWM Modules 2
Serial Interfaces SPI and I2C-compatible synchronous serial port
Instruction Set 77 single-word instructions
Programming Enhanced Flash with self-programming
Debug Interface In-Circuit Debugger (ICD)
封裝 44-pin VQFN, 8 mm x 8 mm, exposed pad
安裝類型 Surface mount
Shipping Format Tube
Operating Voltage 5 V

PIC18F442-E/ML 44-pin vqfn, 8 mm x 8 mm, exposed pad 腳位配置指南

PIC18F442-E/ML(44-pin vqfn, 8 mm x 8 mm, exposed pad 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

PIC18F442-E/ML 的 44-pin vqfn, 8 mm x 8 mm, exposed pad 封裝腳位圖

無詳細腳位定義資料: PIC18F442-E/ML.

請參閱 資料表 以查看完整腳位配置。

典型應用

PIC18F442-E/ML 適用於 6 應用s: Industrial Control Panels, Sensor Acquisition Systems, Temperature Controllers, Motor and Actuator Control, Communication Gateways, Compact Instrumentation.

🏭

Industrial Control Panels

PIC18F442-E/ML fits compact industrial control panels that require a mix of digital inputs, outputs, analog monitoring, and serial communications. Its 34 I/O pins can connect switches, indicators, relays, and discrete sensors, while the eight-channel 10-bit ADC supports temperature, pressure, and potentiometer inputs. At up to 40 MHz and 10 MIPS, the device provides responsive control without an external processor. The 44-pin VQFN exposed pad also reduces board area and provides a useful thermal copper area. Firmware should assign peripheral functions from the package pin table, and the final industrial temperature and EMC requirements should be validated against the manufacturer datasheet.

🧩

Sensor Acquisition Systems

PIC18F442-E/ML is suitable for distributed sensor nodes that combine analog measurement with local processing and serial data transfer. The eight 10-bit ADC channels can read resistive sensors through suitable conditioning circuits, while 34 I/O pins handle switches, alert outputs, and status indicators. The 16 KB Flash program area stores application firmware, 768 bytes of RAM supports protocol and control buffers, and 256 bytes of EEPROM can retain calibration or configuration values. Its SPI and I2C-compatible interfaces allow connection to sensors, display controllers, or external nonvolatile memory. Design the analog front end and grounding for the intended signal bandwidth, and verify the final measurement accuracy against the ADC specifications.

🌡️

Temperature Controllers

PIC18F442-E/ML can implement standalone temperature-control loops using an analog sensor input, digital setpoint inputs, and a heater or cooler drive output. The 10-bit ADC provides eight measurement channels, while two capture/compare/PWM modules support timing functions that can be used for alarm, duty-cycle, or actuator-control tasks. Its 40 MHz core and 77-instruction architecture leave capacity for display handling, communications, and supervisory logic beyond the basic control loop. Use isolated transistor or MOSFET drive stages rather than driving loads directly from an I/O pin, and account for thermal cycles, sensor noise, and output latency in the control design.

🔧

Motor and Actuator Control

PIC18F442-E/ML is appropriate for small motor, valve, and actuator-control modules where timing, feedback, and mixed I/O are more important than very high processing power. The two capture/compare/PWM peripherals can generate or capture timing signals, while the 10-bit ADC can monitor current, position, or supply-related analog conditions. Thirty-four I/O pins leave connections available for encoders, limit switches, drivers, and communications. The 44-pin VQFN footprint supports space-constrained boards, although the exposed pad must be connected according to the manufacturer land pattern. Firmware and hardware must include suitable flyback protection, driver enable sequencing, and fault handling for inductive loads.

🌐

Communication Gateways

PIC18F442-E/ML can serve as a compact protocol-conversion or embedded gateway controller when the design needs both legacy serial support and configurable I/O. The synchronous serial port supports SPI or I2C operation, and the remaining I/O pins can implement indicators, configuration switches, modem-control signals, or status reporting. Its 16 KB Flash and 768 bytes of RAM are sufficient for many lightweight bridge and supervisory functions, while self-programming supports field configuration workflows. Buffer handling and protocol timing should be reviewed against the required baud rate and message size. The ML package also leaves little unused board area, making thermal design and exposed-pad soldering especially important during assembly.

🖥️

Compact Instrumentation

PIC18F442-E/ML is well matched to compact test, measurement, and process-instrument products that need local control and data capture. Eight 10-bit ADC inputs can monitor several sensor or reference signals, while 34 I/O pins support displays, buttons, status LEDs, relays, and external data converters. The 40 MHz operating rate allows responsive sampling, calibration, and control code, and 256 bytes of EEPROM can hold basic setup data. For higher-accuracy measurement channels, an external precision converter such as ADS8519IDB can complement the MCU's general-purpose ADC. Verify the analog bandwidth, acquisition timing, calibration method, and enclosure temperature before treating the embedded ADC as metrology-grade.

What are the key specifications of PIC18F442-E/ML that engineers should know?
The PIC18F442-E/ML is an 8-bit PIC18 microcontroller with a 40 MHz maximum clock, 16 KB Flash, 768 bytes of RAM, 256 bytes of EEPROM, 34 I/O pins, and eight 10-bit ADC channels. According to the Microchip Technology PIC18F442 datasheet, the device also provides two capture/compare/PWM modules, SPI, an I2C-compatible synchronous serial port, self-programming, and ICD support. It is packaged in a 44-pin VQFN with an exposed pad.
Where can I download the PIC18F442-E/ML datasheet PDF?
The authoritative PIC18F442-E/ML datasheet PDF is available from Microchip Technology through the official PIC18F442 product page and the manufacturer document link on this page. The manufacturer datasheet contains device-specific information for PIC18F242, PIC18F442, PIC18F252, and PIC18F452. Use the package pinout, electrical characteristics, and ordering-information sections to verify the ML package and E temperature grade before releasing a PCB or production order.
What does the ML suffix mean on PIC18F442-E/ML?
The ML suffix identifies the 44-pin VQFN package configuration with an exposed pad, supplied in a tube according to the product listing. The E portion identifies the device temperature-grade designation, while the remaining suffix characters and the manufacturer ordering table define the exact commercial part configuration. According to Microchip Technology ordering information, engineers should confirm all suffix characters rather than treating every PIC18F442 package as electrically and mechanically interchangeable.
What is the pinout for the PIC18F442-E/ML 44-pin VQFN?
The PIC18F442-E/ML uses a 44-pin VQFN land pattern with an exposed thermal and electrical pad. Use the pin-description and package-drawing tables in the Microchip Technology PIC18F442 datasheet when assigning ports, power pins, analog inputs, programming connections, and exposed-pad connections. The exposed pad is not a substitute for a normal signal pin; its solder and thermal requirements must be implemented exactly as shown in the manufacturer's land-pattern guidance.
Can PIC18F442-I/ML replace PIC18F442-E/ML as a drop-in part?
PIC18F442-I/ML uses the same 44-pin VQFN configuration and is the closest identified same-footprint alternative, but temperature-grade requirements must be checked before substitution. The E grade is intended for the extended temperature class, whereas the I grade is the industrial class. According to Microchip Technology ordering information, both parts share the ML package footprint, but their suffix-defined temperature specifications are not interchangeable when the application exceeds the I-grade limits.
What is the difference between PIC18F442-E/ML and PIC18F442-E/L?
PIC18F442-E/ML and PIC18F442-E/L use different package suffixes, so they are not pin-to-pin drop-in alternatives. The ML version is the 44-pin VQFN exposed-pad package, while the L version is associated with the 44-pin PLCC package. According to the Microchip Technology PIC18F442 datasheet, the family is offered in multiple 28-pin and 40/44-pin packages; changing from ML to L therefore requires a different PCB footprint and assembly method.
Is PIC18F442-E/ML suitable for an industrial control application?
PIC18F442-E/ML is suitable for many industrial-control designs when its complete electrical and temperature limits satisfy the enclosure environment. The device provides 34 I/O pins, eight 10-bit ADC channels, 16 KB Flash, 768 bytes of RAM, 256 bytes of EEPROM, and two capture/compare/PWM modules. Its E temperature suffix denotes the extended-grade option, but the final suitability must be confirmed against the datasheet limits, system power quality, and required product qualification.
When should I choose PIC18F442-E/ML over another 8-bit MCU?
Choose PIC18F442-E/ML when the design benefits from the established PIC18 instruction set, enhanced Flash self-programming, 34 I/O pins, eight 10-bit ADC channels, and an exposed-pad 44-pin VQFN. It is a strong fit for compact legacy-compatible industrial controllers and sensor systems. Choose another MCU when a different architecture, greater memory, more ADC channels, lower power consumption, or a non-VQFN package better matches the product constraints.
What is the best drop-in replacement for PIC18F442-E/ML?
PIC18F442-I/ML is the closest identified drop-in candidate because it retains the 44-pin VQFN ML footprint and the same PIC18F442 device family. Its temperature-grade designation differs from the E grade, so it is a valid PCB replacement only where the I-grade temperature limits are adequate. No independently verified cross-brand drop-in replacement was identified; use Microchip Technology's cross-reference search for a controlled qualification process.
What can replace PIC18F442-E/ML on an existing PCB?
PIC18F442-I/ML can replace PIC18F442-E/ML on the same 44-pin VQFN footprint when the I-grade temperature rating satisfies the application. The pin configuration and primary device functions remain within the PIC18F442 family, but the exact operating-temperature, characterization, and qualification requirements still need verification. A PLCC, TQFP, or 28-pin PIC18 device is not a physical drop-in replacement even if its software architecture is similar.
What is the best Microchip Technology equivalent for PIC18F442-E/ML?
PIC18F442-I/ML is the best identified Microchip Technology alternative for a same-package substitution because it uses the same 44-pin VQFN ML package. The principal difference is the E versus I temperature-grade designation, not the core memory or peripheral architecture. Microchip Technology's official cross-reference search should be used to confirm availability and any current lifecycle or qualification details before production release.
How much memory does PIC18F442-E/ML have?
PIC18F442-E/ML provides 16 KB of enhanced Flash program memory, 768 bytes of SRAM, and 256 bytes of EEPROM. According to the Microchip Technology PIC18F442 product overview, the Flash organization is 8K by 16 words and the device supports self-programming. These resources are suitable for embedded control firmware, calibration values, configuration data, and small working-data requirements, although final application sizing should include protocol buffers and interrupt-service memory.
How fast is PIC18F442-E/ML?
PIC18F442-E/ML supports operation up to 40 MHz and can execute instructions at a rate of 10 MIPS with a 100 ns instruction cycle. According to the Microchip Technology PIC18F442 product page, the device uses a 77-single-word-instruction architecture. Actual application performance depends on oscillator configuration, instruction mix, interrupt latency, peripheral operation, memory-wait states, and firmware optimization.
What peripherals are built into PIC18F442-E/ML?
PIC18F442-E/ML includes an eight-channel 10-bit ADC, two capture/compare/PWM modules, SPI, an I2C-compatible synchronous serial port, 34 I/O pins, and an ICD interface. According to the Microchip Technology product overview, the device also supports self-programming. Exact pin multiplexing and peripheral availability by package are defined in the datasheet, so PCB assignments and firmware configuration should be checked together before fabrication.
Where can I buy PIC18F442-E/ML and what is its lead time?
Use the Request a Quote form on this page to check availability, current commercial terms, and lead time for the exact PIC18F442-E/ML order code. The E/ML suffix identifies a specific temperature-grade and package combination, and substitution with another PIC18F442 suffix may change temperature limits or PCB compatibility. Share the required quantity, target date, and assembly packaging requirements with the quote team so the exact MPN can be confirmed.
What is the price of PIC18F442-E/ML?
The current commercial price of PIC18F442-E/ML is handled through the Request a Quote form on this page. The quote should be requested for the exact E/ML suffix because the family includes multiple temperature grades, package forms, and shipping configurations. Provide quantity and required dates so obsolete or constrained inventory can be identified without confusing a different PIC18F442 package with the 44-pin VQFN ML device.
Is PIC18F442-E/ML currently in stock?
Current inventory for PIC18F442-E/ML should be confirmed through the Request a Quote form on this page. A distributor product page can identify a catalog listing without guaranteeing a purchaseable quantity on the requested delivery date. For production planning, provide annual usage, forecast cadence, acceptable package format, and required date so the exact MPN and current supply position can be reviewed.

工程參考資料,適用於 PIC18F442-E/ML — 比較、設計指引及合規資訊。

選型指南

Choose PIC18F442-E/ML for a compact 8-bit embedded-control design that requires 16 KB Flash, 768 bytes of RAM, 34 I/O pins, eight 10-bit ADC channels, and a 44-pin VQFN footprint. Choose PIC18F442-I/ML when its I-grade temperature limits cover the application and you need a like-for-like PCB substitution; the shared ML package makes mechanical interchange straightforward, but the grade difference remains important. Choose PIC18F442T-I/ML only after confirming the complete ordering code and environmental requirements against Microchip Technology documentation. Do not select PIC18F442-E/L for an existing ML board because its package requires a different footprint. For designs needing substantially more memory, ADC resolution, low-power operation, or a different ecosystem, evaluate another MCU rather than assuming a PIC18F442 suffix change preserves all requirements.

與替代品比較

參數 本產品 PIC18F442-I/ML PIC18F442T-I/ML
Brand Microchip Technology Microchip Technology Microchip Technology
Package 44-pin VQFN (ML) 44-pin VQFN (ML) 44-pin VQFN (ML)
Core Architecture 8-bit PIC18 8-bit PIC18 8-bit PIC18
Maximum Frequency 40 MHz 40 MHz 40 MHz
Program Memory 16 KB Flash 16 KB Flash 16 KB Flash
RAM 768 bytes 768 bytes 768 bytes
EEPROM 256 bytes 256 bytes 256 bytes
General-Purpose I/O 34 pins 34 pins 34 pins
ADC 8-channel, 10-bit 8-channel, 10-bit 8-channel, 10-bit
Temperature-Grade Suffix E I T-I

主要差異化特點

  • Extended-grade suffix within the established PIC18F442 family (對比PIC18F442-I/ML)
  • Identical 40 MHz core and memory configuration (對比PIC18F442-I/ML)
  • Exposed-pad 44-pin VQFN construction (對比PIC18F442-E/L)
  • Integrated mixed-signal and serial peripheral set (對比ATTINY44A-MFR)

設計說明

Treat the VQFN exposed pad as both a thermal feature and a required electrical connection. Follow the Microchip Technology package drawing for the pad connection, solder-mask opening, and recommended land pattern. Provide uninterrupted ground or thermal copper beneath the device where the datasheet permits, and avoid long thermal slots that can interrupt heat spreading. Temperature-rise calculations must use the package thermal information for the actual PCB copper area, not a generic estimate. Limit soldering duration because excessive heating can damage the internal flash memory or shift the pad before reflow completes.

Place the MCU's decoupling capacitor at the supply pins using the shortest possible trace, and route high-current return paths so switching-node noise does not share narrow paths with analog inputs. Keep the exposed-pad area free of conflicting silkscreen or assembly markings and follow the manufacturer land pattern exactly. The 34 available I/O pins are multiplexed with peripheral functions, so freeze pin assignment and alternate-function selection before layout. Route programming and debug interfaces to accessible test pads without compromising analog signal routing.

Do not substitute by the PIC18F442 base name alone: ML, L, and P identify different package constructions, while E, I, and other characters define commercial or temperature options. PIC18F442-I/ML shares the target VQFN footprint, but its temperature grade may be unsuitable where the E-grade limits are required. A PLCC or TQFP alternative requires a new land pattern even if the core architecture and firmware are similar. Confirm the complete suffix, pin table, oscillator configuration, and operating-temperature requirements before procurement or PCB release.

Treat every analog input according to the selected source impedance and ADC acquisition requirements. The internal 10-bit converter is suitable for many supervisory and control measurements, but source settling time, sampling capacitance, noise, and external filtering can determine usable accuracy. Keep analog traces away from switching nodes and high-current motor-drive paths, use a quiet reference arrangement, and establish the required grounding topology in the test setup. If the application needs higher resolution or precision, use an external converter such as ADS8519IDB rather than assuming additional averaging alone will meet the specification.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The available product information does not state the requested compliance or environmental-certification results. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact order code with the manufacturer or its current product documentation.

相關搜尋

pic18f442 datasheet pic18f442 ip datasheet PIC18F442-E/ML datasheet PIC18F442-E/ML datasheet pdf PIC18F442-E/ML pinout PIC18F442-E/ML price PIC18F442-E/ML stock PIC18F442-E/ML equivalent PIC18F442-E/ML replacement PIC18F442-E/ML vs PIC18F442-I/ML Microchip PIC18F442-E/ML PIC18F442 44 pin VQFN PIC18F442 40MHz 16KB flash PIC18F442 industrial controller PIC18F442 sensor acquisition

相關元件與詞彙

Microchip Technology PIC18F442 PIC18F442-E/ML PIC18F442-I/ML PIC18F442T-I/ML PIC18F442-E/L PIC18 microcontroller 8-bit microcontroller enhanced-flash microcontroller RISC-like instruction set embedded control semiconductor 44-pin VQFN ML package exposed pad surface-mount package QFN family 10-bit analog-to-digital converter capture/compare/PWM SPI I2C-compatible synchronous serial port In-Circuit Debugger self-programming industrial control sensor acquisition
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情