STM32F103RBH6TR - 32-Bit 72MHz 128KB MCU | STMicroelectronics (Tape & Reel)
MPN： STM32F103RBH6TR ✓ 啟用中STM32F103RBH6TR 概覽
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and input/output interfaces onto one package. The STM32F103RBH6TR uses an ARM Cortex-M3 core within the broader embedded MCU hierarchy: microcontroller, embedded processor, semiconductor, and electronic component. This family is commonly used where deterministic control, communication connectivity, and broad peripheral integration are needed without a separate external processor.
The STM32F103RBH6TR provides 128KB of Flash memory, a 72MHz maximum clock indication in the verified listing, and a 32-bit architecture. The STM32F103 family is also identified in the verified material as supporting CAN, LIN, USB, mixed-signal functions, and timer-driven control. These interfaces make it suitable for industrial controllers, communication equipment, motor-control systems, data acquisition modules, and compact consumer products.
The device is packaged in a 64-TFBGA, 5mm by 5mm form factor. TFBGA is a surface-mount ball-grid-array package, allowing a compact PCB footprint and short electrical connections when the board layout follows the manufacturer pin and escape-routing requirements. The verified distributor snippet lists 64 pins, while the exact exposed-ball assignments and electrical limits require confirmation from the manufacturer datasheet.
A typical design places the MCU beside stable power regulation, decoupling capacitors, oscillator circuitry, reset support, programming access, and application-specific sensors or communication transceivers. Firmware configuration determines whether the available timers, serial interfaces, analog inputs, and communication blocks are used for control, monitoring, or data exchange. Designers should verify package-specific pin multiplexing, power sequencing, clock limits, and peripheral availability against the official datasheet before layout release.
The STM32F103RBH6TR is best suited to compact embedded-control platforms where 32-bit processing, 128KB Flash, and integrated mixed-signal or communications capability are valuable. Compared with larger LQFP alternatives, its 64-TFBGA package can reduce board area, but it increases assembly and inspection complexity. Compare competitor devices by exact package, pin mapping, memory, peripheral set, clock behavior, and validated firmware support rather than by CPU frequency alone.
This page combines verified distributor specifications, package information, pricing references, source links, application guidance, and drop-in alternatives for engineering evaluation. Alternative parts require careful validation of pin compatibility, electrical limits, memory, peripherals, clock behavior, and software support before substitution.
直接替換替代品，適用於 STM32F103RBH6TR — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： STM32F103RBH6TR （相同外形與佔位） — 差異在於 Communication Interfaces, Package, Series, Timers, RoHS Status.
GD32F103
✅ 直接替換📋 參考替代品（不在目錄中）
STM32F103R8H6
✅ 直接替換聯絡詢價
查看資料表 →STM32F103R6T6
✅ 直接替換聯絡詢價
查看資料表 →AT32F403ARGT7
✅ 直接替換聯絡詢價
查看資料表 →STM32F100RBH6B
✅ 直接替換📋 參考替代品（不在目錄中）
STM32F103RBH6TR 最大額定值與電氣特性
| Product Type | 32-bit microcontroller |
| Processor Core | ARM Cortex-M3 |
| Architecture | 32-bit |
| 最大時脈頻率 | 72 MHz |
| Flash Memory | 128 KB |
| 封裝 | 64-TFBGA (5mm x 5mm) |
| 腳位數 | 64 pins |
| Supply Positioning | 2.5V/3.3V |
| Communication Interfaces | CAN, LIN, USB |
| Control Focus | Mixed-signal and timer-driven control |
| 安裝類型 | Surface mount |
| Package Family | TFBGA ball-grid-array family |
| Manufacturer | STMicroelectronics |
| Series | STM32F1 |
STM32F103RBH6TR tfbga ball-grid-array family 腳位配置指南
STM32F103RBH6TR（tfbga ball-grid-array family 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： STM32F103RBH6TR.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32F103RBH6TR 適用於 6 應用s: Industrial Control and Automation, CAN-Based Distributed Control, USB-Connected Embedded Devices, Motor Control and Actuator Systems, Data Acquisition and Sensor Hubs, Consumer and Communication Products.
Industrial Control and Automation
The STM32F103RBH6TR fits compact industrial controllers where a 32-bit Cortex-M3 core, 72MHz class performance, and 128KB Flash support control logic, state machines, monitoring, and communications. Its verified CAN, LIN, and USB positioning is useful when the controller must connect to sensors, actuators, service tools, or a host computer. The 64-TFBGA package helps reduce board area, but a dense ball layout requires disciplined power, decoupling, and signal-integrity design. Validate industrial temperature, isolation, EMC, and long-term supply requirements before production.
推薦
CAN-Based Distributed Control
STM32F103RBH6TR is suitable for distributed control nodes that need deterministic embedded processing alongside a CAN interface. The 32-bit Cortex-M3 core can handle protocol tasks, supervisory logic, debouncing, diagnostics, and local actuation, while the verified 128KB Flash provides room for application firmware. The MCU's 72MHz class operation supports responsive task scheduling, although actual timing depends on clock configuration, interrupt load, and firmware architecture. Validate transceiver selection, termination, isolation, ESD protection, and the exact CAN peripheral pin mapping before release.
推薦
USB-Connected Embedded Devices
The verified USB capability and 32-bit Cortex-M3 architecture make STM32F103RBH6TR a reasonable candidate for USB-connected embedded products such as configuration tools, data loggers, and peripheral controllers. Firmware can combine USB communication with timers, mixed-signal control, and local status reporting. Designers should treat the MCU as the protocol and control center rather than assume that USB power, protection, or connector requirements are built into the package. Validate the exact USB device or host capability, pin assignment, bus voltage, ESD strategy, and enumeration behavior against the official documentation.
推薦
Motor Control and Actuator Systems
The STM32F103RBH6TR can support compact motor-control and actuator systems because the verified family description emphasizes timer-driven control and mixed-signal functions. Timers can generate control pulses or capture timing events, while the MCU executes current control, position logic, fault handling, and communications. The 64-TFBGA package helps integrate the controller into compact drives, but exposed-ball thermal and assembly considerations become more important at higher switching rates. Verify PWM resolution, complementary outputs, ADC performance, current sensing, and pin muxing before assigning the MCU to a specific topology.
推薦
Data Acquisition and Sensor Hubs
The 32-bit ARM Cortex-M3 MCU and verified 128KB Flash make STM32F103RBH6TR appropriate for small sensor hubs, monitoring nodes, and mixed-signal data-acquisition products. Firmware can sample available analog and digital inputs, apply filtering, manage alarms, and transmit results over the verified CAN, LIN, or USB-related connectivity options. The supplied data does not specify ADC resolution, sampling rate, RAM, or GPIO count, so those parameters must be checked before selecting the device for high-channel-count or high-rate applications. Package routing and sensor-conditioning accuracy are equally important.
推薦
Consumer and Communication Products
STM32F103RBH6TR is suitable for compact consumer devices and communication modules that need more capability than a simple 8-bit controller but do not require a high-end application processor. The verified 72MHz Cortex-M3 performance and 128KB Flash support protocol handling, user-interface logic, timing, and local storage of firmware. CAN, LIN, and USB capabilities can simplify connectivity to accessories, service tools, or host systems. Product teams should confirm licensing, toolchain support, production programming, package assembly, and the exact peripheral mix before committing the MCU to a high-volume design.
推薦
推薦產品摘要
工程參考資料，適用於 STM32F103RBH6TR — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | GD32F103 | STM32F103R8H6 | STM32F103R6T6 | AT32F403A | STM32F100RBH6B |
|---|---|---|---|---|---|---|
| Package | 64-TFBGA (5mm x 5mm) | 64-TFBGA (5mm x 5mm), exact ball map requires verification | 64-TFBGA family alternative, exact footprint requires verification | 64-TFBGA family alternative, exact footprint requires verification | 64-TFBGA alternative, exact footprint requires verification | 64-TFBGA family alternative, exact footprint requires verification |
| Brand | STMicroelectronics | GigaDevice | STMicroelectronics | STMicroelectronics | Artery | STMicroelectronics |
| Drop-In Status | Target device | Candidate; exact TFBGA pin compatibility requires validation | Candidate; exact footprint and memory require validation | Candidate; exact footprint and memory require validation | Candidate; exact footprint and parameters require validation | Candidate; exact footprint and parameters require validation |
主要差異化特點
- Verified 128KB Flash in a compact 64-TFBGA package (對比STM32F100RBH6B)
- 32-bit ARM Cortex-M3 control platform (對比GD32F103)
- Compact 5mm by 5mm surface-mount footprint (對比STM32F103R8H6)
- Verified connectivity positioning (對比AT32F403A)
設計說明
Use the official TFBGA ball map and escape-routing rules before committing the PCB. The verified package is 64-TFBGA at 5mm by 5mm, so power, ground, decoupling, oscillator, programming, and communication nets must be routed with the manufacturer's recommended stack-up and ball-pad geometry. Confirm assembly capability and inspection access before layout release; a compact package can save board area but increase routing and soldering risk.
Design the supply network around the manufacturer's exact voltage and current limits rather than the broad 2.5V/3.3V positioning in the distributor listing. Place local decoupling close to the MCU power balls, provide clean return paths, and verify startup, brownout, and reset behavior. Because the supplied data does not include operating current or absolute maximum ratings, those values must come from the official datasheet before power-supply sizing.
Do not assume that an STM32F103-family substitute is drop-in merely because it uses a related package name. The verified alternative material mentions GD32F103 pin-to-pin compatibility at a family level, but the exact STM32F103RBH6TR 64-TFBGA ball map, electrical limits, timing, peripheral mapping, and firmware behavior still require validation. Check boot configuration, oscillator pins, debug access, communication pins, and production programming before approving a second source.
合規資訊
The supplied verified data does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for STM32F103RBH6TR. Verify these claims with the current manufacturer or authorized distributor documentation.
