TAS5630PHD - 300W Stereo Class-D Power Stage | Texas Instruments
MPN: TAS5630PHD ✓ 啟用中TAS5630PHD 概覽
A Class-D audio power stage is a semiconductor amplifier category that converts a PWM switching output into a filtered analog speaker signal. The TAS5630 belongs to the Class-D amplifier, audio power amplifier, and power management IC hierarchies. Its PurePath HD architecture integrates closed-loop feedback, linking the power-stage output to the analog input and reducing sensitivity to load-dependent nonlinear distortion.
The principal characteristics are 300 W maximum stereo output power, support for 4 Ω to 8 Ω speaker loads, and operation from a single 50 V supply. The device accepts analog audio input and can be configured for mono or stereo operation. These attributes suit high-power audio systems where efficiency, low heat loss, and accurate speaker-current feedback are important.
The integrated feedback architecture distinguishes the TAS5630 from basic open-loop Class-D solutions. It monitors output behavior through the feedback network, allowing the amplifier to correct nonlinear output distortion. Because achievable power depends strongly on the PCB, power-supply design, thermal interface material, and heat-sink configuration, a nominal 300 W rating should not be treated as a guaranteed output level in an arbitrary enclosure.
Typical applications include powered loudspeakers, active PA cabinets, professional audio consoles, home-theater power amplifiers, subwoofer amplifiers, and compact high-power stereo receivers. The 50 V supply requirement places the device in the high-voltage class-D power-stage category, requiring careful component spacing, a substantial thermal interface, and robust high-voltage layout practices.
Designers should follow the manufacturer datasheet reference layout for the exposed heat slug, power stages, output network, and analog input routing. The package must be coupled to an appropriately sized heat sink through high-performance thermal interface material. Power-supply and output-network components also require voltage, current, pulse-energy, and thermal ratings suitable for Class-D operation.
This product page combines the manufacturer power-stage capabilities, exact package information, thermal guidance, sourcing details, and replacement analysis. It also identifies where a true same-footprint replacement cannot be confirmed, preventing a merely similar amplifier from being presented as a drop-in substitute.
直接替換替代品,適用於 TAS5630PHD — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
TAS5630BPHD
✅ 直接替換📋 參考替代品(不在目錄中)
TAS5631BPHD
✅ 直接替換📋 參考替代品(不在目錄中)
TAS5630PHD 最大額定值與電氣特性
| Product Type | Analog-input Class-D audio power stage |
| Maximum Stereo Output Power | 300 W |
| Maximum Mono Output Power | 600 W |
| Supported Speaker Load | 4 ohm to 8 ohm |
| 供應電壓 | 50 V |
| Feedback Architecture | Integrated closed-loop PurePath HD feedback |
| Input Type | Analog input |
| 輸出配置 | 1-channel mono or 2-channel stereo |
| 封裝 | 64-HTQFP (14 mm x 14 mm) |
| 安裝類型 | Surface mount |
| Exposed Thermal Pad | Present |
| RoHS 狀態 | Compliant |
| Thermal Interface Requirement | High-performance thermal interface material between package heat slug and heat sink |
TAS5630PHD 64-htqfp (14 mm x 14 mm) 腳位配置指南
TAS5630PHD(64-htqfp (14 mm x 14 mm) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: TAS5630PHD.
請參閱 資料表 以查看完整腳位配置。
典型應用
TAS5630PHD 適用於 6 應用s: Powered Professional Loudspeaker, Active Subwoofer Amplifier, Home-Theater Power Amplifier, PA and Venue Amplifier, Digital-Audio Power Converter, High-Power Audio Amplifier Rack.
Powered Professional Loudspeaker
The TAS5630PHD fits high-output active loudspeaker designs because it can provide up to 300 W per channel for 4 Ω to 8 Ω drivers from a single 50 V supply. It is placed in the Class-D output stage behind the mixer or preamplifier, with analog input filtering, supply decoupling, speaker output filtering, and protection circuitry implemented according to the manufacturer reference design. Integrated PurePath HD feedback helps reduce load-dependent distortion. The 64-HTQFP exposed heat slug must be coupled to a substantial heat sink through high-performance thermal interface material, because achievable continuous power depends on the PCB and thermal configuration.
推薦
Active Subwoofer Amplifier
The TAS5630PHD is suitable for an active subwoofer power amplifier configured for high output into a 4 Ω or 8 Ω driver. Its analog-input architecture accepts a line-level signal from a crossover or source module, while the integrated PurePath HD feedback system supports accurate output-current control and lower load-dependent distortion. The single 50 V supply architecture simplifies system power distribution while still requiring carefully rated bulk and high-frequency decoupling. Output protection, DC-offset behavior, clipping, and thermal safeguards must be evaluated against the loudspeaker impedance and continuous program power.
推薦
Home-Theater Power Amplifier
The TAS5630PHD can serve as the main Class-D output stage of a high-power home-theater or multichannel power amplifier. Its 300 W per-channel capability covers demanding speaker configurations, while analog inputs can be driven from preamplifier channels or passive crossover networks. The 64-HTQFP package provides a direct path from the power device to a chassis heat sink, but signal integrity depends on keeping analog input routing away from switching nodes. Output inductors, filter capacitors, speaker relays, and protection components must be selected for the intended impedance and power level.
推薦
PA and Venue Amplifier
For portable or installed PA amplification, the TAS5630PHD provides a high-efficiency power-conversion solution for driving passive 4 Ω or 8 Ω loudspeaker arrays. Its integrated closed-loop PurePath HD feedback is valuable in venues where speaker impedance varies with frequency and parallel cabinets reduce the effective load. The amplifier should be paired with input limiting, DC protection, temperature monitoring, and a system-level speaker disconnect strategy. Its 50 V supply requirement and exposed thermal package make power conversion, airflow, and heat-sink design central to maintaining output performance.
推薦
Digital-Audio Power Converter
The TAS5630PHD can form the final analog power-conversion section of a digital-audio playback system. A digital audio processor supplies an analog signal to the Class-D input, and the integrated feedback network drives the speaker output while correcting nonlinear errors. This arrangement supports high output power without placing a linear output stage after the digital signal chain. Analog input routing should remain short and isolated from the switching stage, while the output network must be designed around the target 4 Ω or 8 Ω impedance and the device's high-power switching behavior.
推薦
High-Power Audio Amplifier Rack
The TAS5630PHD is appropriate for rack-mount professional amplifiers where each channel requires hundreds of watts and efficient power delivery. Its Class-D topology reduces the heat that must be removed compared with an equivalent linear output stage, but the device still requires a carefully engineered heat spreader, interface material, and forced or natural-convection enclosure design. The single 50 V supply architecture supports common high-power bus concepts, while the analog input section benefits from shielded routing and clean grounding. Production designs should include independent channel protection and temperature monitoring around the exposed package.
推薦
推薦產品摘要
工程參考資料,適用於 TAS5630PHD — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TAS5630BPHD | TAS5631BPHD |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 64-HTQFP (14 mm x 14 mm) | 64-HTQFP | 64-HTQFP |
| Amplifier Type | Class-D analog-input power stage | Class-D power stage | Class-D power stage |
| Maximum Stereo Output Power | 300 W | 300 W | 300 W |
主要差異化特點
- High output power in an integrated analog-input Class-D stage (對比TAS5631BPHD)
- Same-family upgrade path (對比TAS5631BPHD)
- Closest identified same-family configuration (對比TAS5630BPHD)
設計說明
Treat the exposed heat slug as the primary thermal path. Texas Instruments identifies high-performance thermal interface material between the slug and heat sink as important for achieving the 300 W stereo capability. Size the heat sink from the calculated worst-case conduction and switching loss, ambient temperature, target junction-temperature limit, and the PCB thermal resistance. Verify the assembled thermal path because the advertised power level is conditional on the target application's thermal configuration.
Use the manufacturer reference layout rather than a generic Class-D layout. Keep the high-current output and supply loops compact, provide the required local decoupling at the power-stage pins, and route the analog input away from switching nodes. The high-current and high-voltage nature of this stage makes copper area, via arrangement, return-current control, and clean grounding as important as the nominal component values.
Design the single 50 V supply path for the selected continuous and transient output demand. Include local high-frequency bypass capacitors and bulk energy storage close to the power stage, while checking component voltage, ripple-current, pulse-energy, and thermal ratings. Account for startup current and power-supply recovery after clipping or load transitions so the amplifier does not cause the system rail to collapse during normal program changes.
Do not equate a 300 W device rating with guaranteed continuous output from an arbitrary board or heat sink. Validate speaker impedance, filter-component ratings, DC offset, clipping behavior, thermal protection, and the exposed-pad footprint against the final assembly. Also avoid selecting a related family member solely from its 300 W headline rating; verify every pin, control signal, protection function, and land-pattern detail in the applicable manufacturer datasheet.
合規資訊
The exact-MPN distributor listing identifies the device as ROHS3 compliant and lead-free. No additional certification claims are made for REACH, halogen-free status, or conflict-minerals compliance.