TAS5630PHD - 300W Stereo Class-D Power Stage | Texas Instruments
部品番号: TAS5630PHD ✓ 生産中TAS5630PHD 概要
A Class-D audio power stage is a semiconductor amplifier category that converts a PWM switching output into a filtered analog speaker signal. The TAS5630 belongs to the Class-D amplifier, audio power amplifier, and power management IC hierarchies. Its PurePath HD architecture integrates closed-loop feedback, linking the power-stage output to the analog input and reducing sensitivity to load-dependent nonlinear distortion.
The principal characteristics are 300 W maximum stereo output power, support for 4 Ω to 8 Ω speaker loads, and operation from a single 50 V supply. The device accepts analog audio input and can be configured for mono or stereo operation. These attributes suit high-power audio systems where efficiency, low heat loss, and accurate speaker-current feedback are important.
The integrated feedback architecture distinguishes the TAS5630 from basic open-loop Class-D solutions. It monitors output behavior through the feedback network, allowing the amplifier to correct nonlinear output distortion. Because achievable power depends strongly on the PCB, power-supply design, thermal interface material, and heat-sink configuration, a nominal 300 W rating should not be treated as a guaranteed output level in an arbitrary enclosure.
Typical applications include powered loudspeakers, active PA cabinets, professional audio consoles, home-theater power amplifiers, subwoofer amplifiers, and compact high-power stereo receivers. The 50 V supply requirement places the device in the high-voltage class-D power-stage category, requiring careful component spacing, a substantial thermal interface, and robust high-voltage layout practices.
Designers should follow the manufacturer datasheet reference layout for the exposed heat slug, power stages, output network, and analog input routing. The package must be coupled to an appropriately sized heat sink through high-performance thermal interface material. Power-supply and output-network components also require voltage, current, pulse-energy, and thermal ratings suitable for Class-D operation.
This product page combines the manufacturer power-stage capabilities, exact package information, thermal guidance, sourcing details, and replacement analysis. It also identifies where a true same-footprint replacement cannot be confirmed, preventing a merely similar amplifier from being presented as a drop-in substitute.
ドロップイン代替品: TAS5630PHD — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
TAS5630BPHD
✅ ドロップイン📋 参考代替品(カタログ未掲載)
TAS5631BPHD
✅ ドロップイン📋 参考代替品(カタログ未掲載)
TAS5630PHD 最大定格&電気的特性
| Product Type | Analog-input Class-D audio power stage |
| Maximum Stereo Output Power | 300 W |
| Maximum Mono Output Power | 600 W |
| Supported Speaker Load | 4 ohm to 8 ohm |
| 電源電圧 | 50 V |
| Feedback Architecture | Integrated closed-loop PurePath HD feedback |
| Input Type | Analog input |
| 出力構成 | 1-channel mono or 2-channel stereo |
| パッケージ | 64-HTQFP (14 mm x 14 mm) |
| 実装タイプ | Surface mount |
| Exposed Thermal Pad | Present |
| RoHS ステータス | Compliant |
| Thermal Interface Requirement | High-performance thermal interface material between package heat slug and heat sink |
TAS5630PHD 64-htqfp (14 mm x 14 mm) ピン配置ガイド
TAS5630PHD (64-htqfp (14 mm x 14 mm) パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: TAS5630PHD.
詳細は データシート をご参照ください。
主な用途
TAS5630PHD の用途: 6 件s: Powered Professional Loudspeaker, Active Subwoofer Amplifier, Home-Theater Power Amplifier, PA and Venue Amplifier, Digital-Audio Power Converter, High-Power Audio Amplifier Rack.
Powered Professional Loudspeaker
The TAS5630PHD fits high-output active loudspeaker designs because it can provide up to 300 W per channel for 4 Ω to 8 Ω drivers from a single 50 V supply. It is placed in the Class-D output stage behind the mixer or preamplifier, with analog input filtering, supply decoupling, speaker output filtering, and protection circuitry implemented according to the manufacturer reference design. Integrated PurePath HD feedback helps reduce load-dependent distortion. The 64-HTQFP exposed heat slug must be coupled to a substantial heat sink through high-performance thermal interface material, because achievable continuous power depends on the PCB and thermal configuration.
おすすめ
Active Subwoofer Amplifier
The TAS5630PHD is suitable for an active subwoofer power amplifier configured for high output into a 4 Ω or 8 Ω driver. Its analog-input architecture accepts a line-level signal from a crossover or source module, while the integrated PurePath HD feedback system supports accurate output-current control and lower load-dependent distortion. The single 50 V supply architecture simplifies system power distribution while still requiring carefully rated bulk and high-frequency decoupling. Output protection, DC-offset behavior, clipping, and thermal safeguards must be evaluated against the loudspeaker impedance and continuous program power.
おすすめ
Home-Theater Power Amplifier
The TAS5630PHD can serve as the main Class-D output stage of a high-power home-theater or multichannel power amplifier. Its 300 W per-channel capability covers demanding speaker configurations, while analog inputs can be driven from preamplifier channels or passive crossover networks. The 64-HTQFP package provides a direct path from the power device to a chassis heat sink, but signal integrity depends on keeping analog input routing away from switching nodes. Output inductors, filter capacitors, speaker relays, and protection components must be selected for the intended impedance and power level.
おすすめ
PA and Venue Amplifier
For portable or installed PA amplification, the TAS5630PHD provides a high-efficiency power-conversion solution for driving passive 4 Ω or 8 Ω loudspeaker arrays. Its integrated closed-loop PurePath HD feedback is valuable in venues where speaker impedance varies with frequency and parallel cabinets reduce the effective load. The amplifier should be paired with input limiting, DC protection, temperature monitoring, and a system-level speaker disconnect strategy. Its 50 V supply requirement and exposed thermal package make power conversion, airflow, and heat-sink design central to maintaining output performance.
おすすめ
Digital-Audio Power Converter
The TAS5630PHD can form the final analog power-conversion section of a digital-audio playback system. A digital audio processor supplies an analog signal to the Class-D input, and the integrated feedback network drives the speaker output while correcting nonlinear errors. This arrangement supports high output power without placing a linear output stage after the digital signal chain. Analog input routing should remain short and isolated from the switching stage, while the output network must be designed around the target 4 Ω or 8 Ω impedance and the device's high-power switching behavior.
おすすめ
High-Power Audio Amplifier Rack
The TAS5630PHD is appropriate for rack-mount professional amplifiers where each channel requires hundreds of watts and efficient power delivery. Its Class-D topology reduces the heat that must be removed compared with an equivalent linear output stage, but the device still requires a carefully engineered heat spreader, interface material, and forced or natural-convection enclosure design. The single 50 V supply architecture supports common high-power bus concepts, while the analog input section benefits from shielded routing and clean grounding. Production designs should include independent channel protection and temperature monitoring around the exposed package.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TAS5630PHD — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TAS5630BPHD | TAS5631BPHD |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 64-HTQFP (14 mm x 14 mm) | 64-HTQFP | 64-HTQFP |
| Amplifier Type | Class-D analog-input power stage | Class-D power stage | Class-D power stage |
| Maximum Stereo Output Power | 300 W | 300 W | 300 W |
主な差別化要因
- High output power in an integrated analog-input Class-D stage (vs TAS5631BPHD)
- Same-family upgrade path (vs TAS5631BPHD)
- Closest identified same-family configuration (vs TAS5630BPHD)
設計ノート
Treat the exposed heat slug as the primary thermal path. Texas Instruments identifies high-performance thermal interface material between the slug and heat sink as important for achieving the 300 W stereo capability. Size the heat sink from the calculated worst-case conduction and switching loss, ambient temperature, target junction-temperature limit, and the PCB thermal resistance. Verify the assembled thermal path because the advertised power level is conditional on the target application's thermal configuration.
Use the manufacturer reference layout rather than a generic Class-D layout. Keep the high-current output and supply loops compact, provide the required local decoupling at the power-stage pins, and route the analog input away from switching nodes. The high-current and high-voltage nature of this stage makes copper area, via arrangement, return-current control, and clean grounding as important as the nominal component values.
Design the single 50 V supply path for the selected continuous and transient output demand. Include local high-frequency bypass capacitors and bulk energy storage close to the power stage, while checking component voltage, ripple-current, pulse-energy, and thermal ratings. Account for startup current and power-supply recovery after clipping or load transitions so the amplifier does not cause the system rail to collapse during normal program changes.
Do not equate a 300 W device rating with guaranteed continuous output from an arbitrary board or heat sink. Validate speaker impedance, filter-component ratings, DC offset, clipping behavior, thermal protection, and the exposed-pad footprint against the final assembly. Also avoid selecting a related family member solely from its 300 W headline rating; verify every pin, control signal, protection function, and land-pattern detail in the applicable manufacturer datasheet.
コンプライアンス情報
The exact-MPN distributor listing identifies the device as ROHS3 compliant and lead-free. No additional certification claims are made for REACH, halogen-free status, or conflict-minerals compliance.