XC4VFX20-11FFG672C - 19,224-Cell Virtex-4 FX FPGA | AMD
MPN: XC4VFX20-11FFG672C ✗ 停產XC4VFX20-11FFG672C 概覽
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior can be configured after fabrication. Within the semiconductor hierarchy, an FPGA belongs to programmable logic devices and sits above standard fixed-function logic ICs. Its value comes from combining many configurable logic elements in one device, allowing a board to implement control, signal-processing, interface, and protocol functions without using a large collection of discrete logic circuits.
The XC4VFX20-11FFG672C provides a listed maximum clock frequency of 1,181 MHz, while another device summary identifies an internal frequency of 1,028 MHz. Its core supply is listed as 1.2 V, with an operating supply range of 1.14 V to 1.26 V. The -11 speed grade occupies the middle of the available Virtex-4 FX performance grades, which are offered in -12, -11, and -10 versions.
The 672-contact package provides 320 configurable I/O, supporting high connectivity for parallel buses, data converters, memory interfaces, and external clocks. The 27 mm by 27 mm S-PBGA-B672 package requires careful high-speed escape routing and a multilayer PCB. Although the underlying silicon supports substantial parallel processing, achievable system performance depends on pin assignment, routing congestion, external memory characteristics, and the selected design tools.
Typical uses include telecommunications equipment, industrial control, test and measurement, high-speed signal processing, network infrastructure, and embedded systems with substantial programmable logic. The device is appropriate when fixed logic would be inflexible or uneconomical, especially when interface logic, buffering, state machines, and DSP functions must be combined in a single package.
System planning should verify the package pinout, power rails, decoupling, clock topology, and I/O standards before layout. Use the manufacturer package pinout files and datasheet when assigning every one of the 672 terminals, because exposed-pad connections, supply pins, configuration pins, and dedicated user I/O require careful PCB treatment.
This product record combines the device specifications, package information, compatible same-family alternatives, and practical engineering guidance to support design evaluation. It also distinguishes the -11 commercial-temperature device from related speed-grade, temperature-grade, and package-ordering variants.
直接替換替代品,適用於 XC4VFX20-11FFG672C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC4VFX20-11FFG672C (相同外形與佔位) — 差異在於 Device Type, Package Type, Internal Frequency, Logic Family, Mounting Type.
XC4VFX20-10FFG672C
✅ 直接替換聯絡詢價
查看資料表 →XC4VFX20-11FFG672I
✅ 直接替換聯絡詢價
查看資料表 →XC4VFX20-11FF672C
✅ 直接替換聯絡詢價
查看資料表 →XC4VFX20-12FFG672C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC4VFX20-10FFG672I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC4VFX20-11FFG672C 最大額定值與電氣特性
| Device Type | Virtex-4 FX field-programmable gate array (FPGA) |
| Configurable Logic Cells | 19,224 cells |
| Configurable Logic Blocks | 2,136 CLBs |
| Input Count | 320 inputs |
| Output Count | 320 outputs |
| 最大時脈頻率 | 1,181 MHz |
| Internal Frequency | 1,028 MHz |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| 工作電源電壓 | 1.14 V to 1.26 V |
| Package Type | FCBGA-672 |
| Package Dimensions | 27 mm x 27 mm |
| Terminal Count | 672 terminals |
| 工作溫度 | 0°C to 85°C |
| Speed Grade | -11 |
| Temperature Grade | Commercial |
| Logic Family | Virtex-4 FX |
| 安裝類型 | Surface mount |
XC4VFX20-11FFG672C 27 mm x 27 mm 腳位配置指南
XC4VFX20-11FFG672C(27 mm x 27 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC4VFX20-11FFG672C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC4VFX20-11FFG672C 適用於 6 應用s: Telecommunications Data Processing, Industrial Control Systems, Test and Measurement Instruments, Network Interface Acceleration, Signal Processing and DSP, Embedded High-Performance Control.
Telecommunications Data Processing
The XC4VFX20-11FFG672C fits telecommunications equipment that needs substantial programmable logic beside high-speed data paths. Its 19,224 configurable logic cells and 2,136 CLBs can implement framing, packet control, buffer management, and interface adaptation, while 320 inputs and 320 outputs support parallel connections to converters, memory, and network PHY devices. The listed maximum frequency of 1,181 MHz provides considerable timing headroom for synchronous processing. Engineers should use the manufacturer clock-capable pin information during assignment and reserve pin resources for the configuration interface and high-speed I/O standards.
推薦
Industrial Control Systems
The XC4VFX20-11FFG672C is suitable for industrial controllers that combine deterministic state machines, data acquisition, communications, and motion-related control in one programmable device. The 320 inputs can support digital sensors and machine interfaces, while the 320 outputs can drive control logic and industrial communications transceivers. Its 0°C to 85°C rating fits controlled industrial enclosures, and the 90 nm CMOS implementation provides a large logic budget for concurrent tasks. The PCB must provide robust power distribution, clean grounding, and appropriate isolation at external interface boundaries.
推薦
Test and Measurement Instruments
A programmable-logic FPGA is useful in test and measurement equipment for sequencing, stimulus generation, capture logic, pattern processing, and instrument-control functions. The XC4VFX20-11FFG672C supplies 19,224 logic cells and 2,136 CLBs for parallel datapaths, together with 320 inputs and 320 outputs for acquisition and source channels. Its listed 1,181 MHz maximum clock can support high-rate state machines and timing generators. Engineers should constrain clock domains carefully, use dedicated clock-capable pins, and implement source-synchronous interfaces with matched board-level timing.
推薦
Network Interface Acceleration
The XC4VFX20-11FFG672C can implement network-interface functions such as packet classification, buffering, protocol conversion, and traffic scheduling in parallel with a host processor. Its 320 I/O provide connectivity for bus-oriented PHYs, while the large 19,224-cell logic budget allows multiple pipeline stages to operate concurrently. The -11 grade and listed 1,181 MHz maximum frequency are useful for timing-sensitive paths, although final throughput depends on memory interfaces and external PHY characteristics. Constraint all I/O timing and avoid routing high-speed interfaces across unrelated clock domains without synchronization.
推薦
Signal Processing and DSP
The XC4VFX20-11FFG672C is suitable for fixed-point filtering, digital conversion control, correlation, waveform generation, and other parallel signal-processing tasks. Its 2,136 configurable logic blocks and 19,224 configurable cells allow multiple arithmetic pipelines to share the available clocking and I/O resources. The 672-terminal package provides 320 inputs and 320 outputs for parallel data movement, while the -11 speed grade supports demanding timing paths. Designers should budget block RAM, DSP resources, routing, and physical I/O together because a logic-only capacity estimate does not guarantee the desired implementation density.
推薦
Embedded High-Performance Control
The XC4VFX20-11FFG672C can serve as the central programmable controller in an embedded system that requires simultaneous real-time logic, data buffering, and external interface management. Its 320 inputs and 320 outputs allow the controller to coordinate sensors, actuators, local memories, and communication links, while 19,224 logic cells provide room for state machines, diagnostics, and protocol engines. The 1.2 V core and 1.14 V to 1.26 V operating supply range call for stable plane-based distribution and close decoupling. Configuration storage, startup sequencing, and clock reset behavior should be validated in the final system implementation.
推薦
推薦產品摘要
工程參考資料,適用於 XC4VFX20-11FFG672C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC4VFX20-10FFG672C | XC4VFX20-11FFG672I | XC4VFX20-11FF672C | XC4VFX20-12FFG672C | XC4VFX20-10FFG672I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FCBGA-672 | FCBGA-672 | FCBGA-672 | FCBGA-672 | FCBGA-672 | FCBGA-672 |
| Device Family | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX |
| Speed Grade | -11 | -10 | -11 | -11 | -12 | -10 |
主要差異化特點
- Higher speed grade than the -10 alternative (對比XC4VFX20-10FFG672C)
- Commercial-temperature ordering target (對比XC4VFX20-11FFG672I)
- Documented 1,181 MHz maximum clock capability (對比XC4VFX20-11FF672C)
設計說明
Use the AMD package pinout file and datasheet as the controlling references for all 672 terminals. The FCBGA-B672 footprint requires multilayer escape routing, short connections between external components and package balls, and uninterrupted power planes. Confirm land pattern, solder-mask definition, component orientation, and substrate finish against the current package drawing rather than copying a generic BGA footprint.
The core supply is listed as 1.2 V with a permitted range of 1.14 V to 1.26 V. Provide separate, low-impedance distribution for the core and other device supply requirements shown in the manufacturer power table. Place the required bulk and high-frequency decoupling capacitors at the associated supply balls, minimize loop area, and verify startup sequencing, voltage ramps, and power-supply tolerance before releasing the board layout.
Assign clock-capable and dedicated configuration pins directly in the constraints file before implementing the remainder of the design. Route high-speed interfaces as controlled-impedance paths with continuous reference planes and avoid unnecessary layer transitions. Apply input delay and output delay constraints based on external-device timing, and treat the listed 1,181 MHz maximum frequency as a device capability rather than a guaranteed system operating frequency.
Do not interchange speed-grade or temperature-grade suffixes solely because the package names match. Confirm the configuration interface, timing grade, operating-temperature range, pin definitions, and lifecycle status for every proposed replacement. The XC4VFX20-10FFG672C differs by speed grade, while the XC4VFX20-11FFG672I changes the temperature designation; either difference can affect design qualification even when the PCB land pattern is unchanged.
合規資訊
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for this legacy FPGA. The device is an industrial programmable-logic IC, so AEC-Q100 is not applicable as a commercial FPGA qualification.