XC7K325T-1FB900C - 326,080-LE Kintex-7 FPGA | AMD
MPN: XC7K325T-1FB900C ✓ 啟用中XC7K325T-1FB900C 概覽
A field-programmable gate array is a semiconductor whose digital logic, interconnects, and peripheral blocks are configured after fabrication. The Kintex-7 family sits between AMD's lower-density programmable-logic products and larger Zynq and Virtex devices. By combining configurable logic with dedicated DSP, memory, and high-speed I/O resources, an FPGA can accelerate parallel processing, signal processing, control, networking, and data-transfer functions without requiring a custom ASIC.
The XC7K325T designation identifies a high-capacity Kintex-7 member. The suffix sequence identifies the -1 performance grade, the FB900 package, and the C temperature designation. The 900-ball FCBGA package supports dense routing to banks of programmable I/O and power-management resources. This package is intended primarily for advanced boards with careful ball assignment, multilayer routing, and controlled power delivery.
The Kintex-7 architecture combines programmable logic with high-speed serial transceivers, dedicated DSP slices, block RAM, and general-purpose I/O. This resource mix allows designers to implement multiple data paths in parallel while retaining specialized hardware for serial interfaces and arithmetic-heavy processing. AMD describes the family as delivering strong price/performance/watt characteristics at the 28 nm process node.
Typical applications include high-throughput data acquisition, industrial control, test and measurement, network packet processing, video and image pipelines, communications infrastructure, and embedded signal-processing systems. The 326,080 logic cells make the device appropriate for designs where parallel logic density is more valuable than minimizing package size or cost. PCIe Gen3 and 10 Gigabit Ethernet support also align it with modern data-plane and host-interface designs.
Hardware implementation requires careful attention to decoupling, power sequencing, clocking, and high-speed signal integrity. Use the pinout files and device documentation to assign power balls, connect all required supplies, and route each high-speed differential pair as a controlled-impedance network. Differential pairs should remain continuous, with matching reference planes and minimal stubs to preserve signal quality.
This product page combines the exact ordering information, 326,080-logic-cell capacity, 900-BBGA package, 28 nm process generation, supported connectivity standards, drop-in family alternatives, and practical PCB implementation guidance. It is designed to accelerate component selection, schematic review, PCB planning, and replacement assessment for engineers working with high-capacity Kintex-7 systems.
直接替換替代品,適用於 XC7K325T-1FB900C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC7K325T-1FB900C (相同外形與佔位) — 差異在於 Device Type, Package, RoHS Status.
XC7K325T-1FB900I
✅ 直接替換聯絡詢價
查看資料表 →XC7K325T-2FB900C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7K325T-3FB900C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7K325T-1LFB900C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7K325T-2LFB900C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7K325T-1FB900C 最大額定值與電氣特性
| Device Type | Kintex-7 field-programmable gate array (FPGA) |
| Logic Cells | 326,080 LEs |
| Process Technology | 28 nm |
| Speed Grade | -1 |
| 封裝 | 900-BBGA, FCBGA |
| Number of Terminals | 900 balls |
| Package Shape | Square |
| High-Speed Serial Support | PCIe Gen3 and 10 Gigabit Ethernet |
| Programmable Logic | 326,080 LEs |
| Family Architecture | Kintex-7 |
| Device Configuration | Field-programmable logic, interconnect, and I/O |
| Temperature Designation | C suffix |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
XC7K325T-1FB900C square 腳位配置指南
XC7K325T-1FB900C(square 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC7K325T-1FB900C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC7K325T-1FB900C 適用於 6 應用s: 10 Gigabit Ethernet Packet Processing, PCIe Gen3 Data-Acquisition Interface, Digital Signal Processing Accelerator, Industrial Control and Automation, Test and Measurement Instrumentation, Video and Image Processing Pipelines.
10 Gigabit Ethernet Packet Processing
The XC7K325T-1FB900C fits parallel packet-processing engines because its 326,080 logic cells can support multiple parsing, classification, queue-management, and forwarding stages at once. AMD identifies 10 Gigabit Ethernet as a mainstream Kintex-7 connectivity option. Designers can pair high-speed transceivers with programmable I/O and dedicated DSP resources while implementing buffering and control logic in the fabric. The principal consideration is power: sustained line-rate operation can make I/O and dynamic power significant, so board thermal design should reflect realistic traffic rather than idle activity.
推薦
PCIe Gen3 Data-Acquisition Interface
The XC7K325T-1FB900C is appropriate for a PCIe Gen3 data-acquisition front end that must transfer high-volume samples into parallel FPGA logic. Its 326,080 logic cells support acquisition formatting, trigger handling, buffering, and real-time processing without relying entirely on external processors. The Kintex-7 family's PCIe Gen3 support makes the device relevant to host-connected instrumentation and test systems. Engineers should reserve lane placement for short, impedance-controlled routing and verify transmitter and receiver equalization against the complete channel and connector environment.
推薦
Digital Signal Processing Accelerator
The XC7K325T-1FB900C can accelerate filters, correlation, modulation, and fixed-point algorithms by combining 326,080 programmable logic cells with the Kintex-7 family's DSP resources. Parallel data paths allow multiple sample lanes or channels to be processed concurrently, while block RAM supports local buffering and coefficient storage. The -1 grade provides a defined timing class for design planning, although each pipeline stage still requires static timing closure. Power analysis should include toggling rate and active DSP resources because arithmetic-heavy designs can consume substantially more dynamic power than control-only logic.
推薦
Industrial Control and Automation
The XC7K325T-1FB900C is suitable for industrial controllers requiring deterministic parallel logic, extensive programmable I/O, and communication interfaces in a single package. A Kintex-7 implementation can combine motion sequencing, machine vision preprocessing, safety-adjacent monitoring, and protocol handling without multiple programmable devices. The XC7K325T-1FB900I offers the same -1 performance class with an industrial temperature designation when the enclosure requires a wider environmental range. Board design must preserve the separation required by the factory's power, isolation, and functional-safety architecture.
推薦
Test and Measurement Instrumentation
The XC7K325T-1FB900C supports parallel acquisition, pattern generation, real-time analysis, and high-speed data movement in advanced instrumentation. The 326,080-logic-cell capacity allows multiple signal-processing channels to coexist, while the 900-BBGA package provides substantial ball access for clocks, data buses, triggers, and serial links. Timing-closure margins depend on the selected -1 grade, so critical interfaces should be constrained according to the AMD Kintex-7 data sheet. Thermal analysis should cover sustained acquisition workloads because continuously active registers and DSPs can raise junction temperature.
推薦
Video and Image Processing Pipelines
The XC7K325T-1FB900C is well matched to parallel image-processing pipelines that require line buffers, filtering, color conversion, feature extraction, and frame-level control. Its 326,080 logic cells provide substantial parallel capacity, while Kintex-7 DSP and memory resources can reduce the amount of general logic required by arithmetic operations. The 900-ball package offers many programmable I/O connections for video interfaces, although high-speed source-synchronous routing demands careful length matching and reference-plane continuity. System power should be estimated using realistic frame rates and active-pixel percentages rather than typical laboratory toggling.
推薦
推薦產品摘要
工程參考資料,適用於 XC7K325T-1FB900C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC7K325T-1FB900I | XC7K325T-2FB900C | XC7K325T-3FB900C | XC7K325T-1LFB900C | XC7K325T-2LFB900C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 900-BBGA (FCBGA) | 900-BBGA (FCBGA) | 900-BBGA (FCBGA) | 900-BBGA (FCBGA) | 900-BBGA (FCBGA) | 900-BBGA (FCBGA) |
| Device Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Logic Cells | 326,080 LEs | 326,080 LEs | 326,080 LEs | 326,080 LEs | 326,080 LEs | 326,080 LEs |
| Speed Grade | -1 | -1 | -2 | -3 | -1L | -2L |
| Temperature Designation | C | I | C | C | C | C |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| High-Speed Interface Support | PCIe Gen3 and 10 Gigabit Ethernet | PCIe Gen3 and 10 Gigabit Ethernet | PCIe Gen3 and 10 Gigabit Ethernet | PCIe Gen3 and 10 Gigabit Ethernet | PCIe Gen3 and 10 Gigabit Ethernet | PCIe Gen3 and 10 Gigabit Ethernet |
| Specialized Resource Capacity | Dedicated DSP and memory resources | Dedicated DSP and memory resources | Dedicated DSP and memory resources | Dedicated DSP and memory resources | Dedicated DSP and memory resources | Dedicated DSP and memory resources |
主要差異化特點
- High-density programmable logic capacity (對比XC7K325T-1FB900I)
- Choice of speed grade without changing the FB900 footprint (對比XC7K325T-2FB900C)
- Commercial C designation for the target configuration (對比XC7K325T-1FB900I)
- Mainstream high-speed connectivity in the Kintex-7 family (對比XC7K325T-1LFB900C)
設計說明
Use the official FB900 package files as the controlling source for ball assignment, power connections, and PCB footprint design. A 900-BBGA device requires dense escape routing, multilayer power planes, and careful component placement around the FPGA. Assign every power and ground ball exactly as directed by AMD, preserve the documented package geometry, and validate the stencil, solder mask, and land pattern against the current package drawing before fabrication.
Plan the power network around every required supply, its decoupling, and the documented sequencing behavior. Place bulk and high-frequency decoupling near the associated balls rather than relying on remote supply traces to suppress package transients. Verify steady-state and worst-case dynamic current using realistic clock, I/O, DSP, and memory activity. The -1 and -L grades can have different power characteristics, so replacement qualification must include more than a pinout comparison.
Route high-speed serial interfaces as short, continuous differential pairs over a solid reference plane. Avoid plane changes, stubs, unnecessary vias, and breaks beneath the pair, and apply the package and board constraints specified by AMD's PCB guidelines. For source-synchronous and memory interfaces, use length matching and flyaway or compensation structures where the interface timing requires them. Signal-integrity simulation should include realistic connector, package, and via models.
Estimate junction temperature from actual workload rather than nominal device power alone. Include FPGA core activity, transceiver use, DSP loading, I/O switching, board copper, airflow, and adjacent heat sources. A high-density 900-BBGA package may require a multilayer PCB with an uninterrupted copper area and deliberate thermal vias. Validate the finished assembly across ambient and power corners before approving the mechanical design.
Do not treat a same-family suffix change as automatically harmless. XC7K325T-1FB900I changes the environmental designation, while -2, -3, -1L, and -2L alternatives change speed, power, or operating conditions. Before substituting any device, verify the complete ordering code, configuration compatibility, pinout, supply requirements, timing grade, temperature class, and system constraints. A successful PCB fit does not by itself establish functional equivalence.
合規資訊
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status is stated for this ordering code. AEC-Q100 is not applicable because the device is an FPGA rather than an automotive-qualified component.