XC7K325T-2FBG900C - 326K-Cell Kintex-7 FPGA | AMD
MPN: XC7K325T-2FBG900C ✓ 啟用中XC7K325T-2FBG900C 概覽
A field-programmable gate array is a programmable digital semiconductor used to implement logic, control, signal processing, connectivity, and embedded systems. The Kintex-7 family occupies the middle ground between low-cost Spartan-7 devices and high-end Virtex devices, balancing logic density, DSP resources, memory bandwidth, and general-purpose I/O. Within the FPGA hierarchy, this device provides substantially more parallel processing capacity than smaller FPGAs while remaining suitable for communications, industrial control, test equipment, and embedded video systems.
The principal resources are 326,080 configurable logic cells, 16,020 Kb of block RAM, 840 DSP slices, and 500 I/O sites. These resources support parallel data pipelines, digital filtering, control logic, protocol handling, and high-speed external interfaces. The -2 ordering code identifies the device performance grade, while the FBG900 suffix identifies the 900-ball package and its exact footprint. The C suffix denotes the commercial temperature option used in the target ordering code.
At the architecture level, the 28 nm Kintex-7 device combines programmable logic with dedicated arithmetic and block-memory resources. DSP slices accelerate multiply-accumulate operations commonly used in filters, transforms, modulation, and signal conditioning. Block RAM provides on-chip storage for buffers, lookup tables, packet data, and wide datapaths. Configurable I/O support allows the FPGA to connect to external memory, transceivers, converters, clocks, and board-level control signals.
Typical uses include industrial automation, communications infrastructure, instrumentation, high-speed test and measurement, embedded processing, video and image pipelines, and digital signal processing. The large FBG900 footprint provides access to many I/O and power connections, but it also demands careful PCB layout, multilayer routing, thermal design, and package-aware assembly planning.
The principal engineering consideration is that a drop-in replacement must reproduce the FBG900 footprint, ball assignment, voltage requirements, configuration behavior, and device resources. Speed-grade or temperature-grade substitutions may preserve the same PCB land pattern but can change timing guarantees and environmental margins. Use AMD pinout files, UG475, and the Kintex-7 data sheet to validate every migration before production release.
This page combines device specifications, same-package replacement options, interface considerations, and design guidance to help engineers evaluate the XC7K325T-2FBG900C beyond a basic catalog listing. It is intended for engineers who need a precise technical assessment of density, packaging, thermal grade, and replacement risk.
直接替換替代品,適用於 XC7K325T-2FBG900C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC7K325T-2FBG900C (相同外形與佔位) — 差異在於 Package, Process Technology, Temperature Grade, Speed Grade, Block RAM.
XC7K325T-2FBG900I
✅ 直接替換聯絡詢價
查看資料表 →XC7K325T-1FBG900I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC7K325T-1FBG900C
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC7K325T-3FBG900C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7K325T-3FBG900I
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7K325T-2FBG900C 最大額定值與電氣特性
| FPGA Family | Kintex-7 |
| Logic Cells | 326,080 cells |
| Block RAM | 16,020 Kb |
| DSP Slices | 840 slices |
| User I/O | 500 I/O |
| Process Technology | 28 nm |
| Core Voltage | 1 V |
| Speed Grade | -2 |
| Temperature Grade | Commercial, 0°C to 85°C junction |
| 封裝 | FBG900, 900-pin lidless FCBGA |
| Package Body Size | 31 mm × 31 mm |
| 安裝類型 | Surface mount |
| Product Type | Field-programmable gate array (FPGA) |
| Programmable Logic | Configurable logic cells and programmable interconnect |
| Embedded Memory | Block RAM |
| Signal Processing | 840 dedicated DSP slices |
XC7K325T-2FBG900C 31 mm × 31 mm 腳位配置指南
XC7K325T-2FBG900C(31 mm × 31 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC7K325T-2FBG900C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC7K325T-2FBG900C 適用於 6 應用s: Industrial Automation and Control, Communications and Network Equipment, Digital Signal Processing, Test and Measurement Equipment, Embedded Video and Image Processing, Aerospace and Defense Systems.
Industrial Automation and Control
The XC7K325T-2FBG900C is appropriate for industrial controllers that combine machine logic, communication protocols, motion-related calculations, and diagnostic functions. Its 326,080 logic cells can support parallel control paths, while 840 DSP slices handle filtering or signal-conditioning operations without shifting every calculation to external processors. The 500 I/O sites provide substantial connectivity for encoders, sensors, actuators, safety monitoring, and field buses. Designers place the device between a 1 V core rail and compatible I/O rails, then use clock-capable inputs and dedicated resources for time-critical signals. The commercial temperature option is suitable when calculated junction temperature remains between 0°C and 85°C; otherwise, an industrial FBG900 grade should be selected. Proper use of the AMD FBG900 pinout files is essential because all 900 package balls must be assigned for a manufacturable design.
推薦
Communications and Network Equipment
The XC7K325T-2FBG900C is suitable for communications equipment requiring parallel packet processing, buffering, backplane interfaces, and protocol acceleration. Its 16,020 Kb of block RAM supports packet queues, lookup structures, and transmit or receive descriptors, while the large logic fabric can implement multiple concurrent data paths. The 500 available I/O sites make the FBG900 package useful for high pin-count interface logic, although external transceivers and memories remain necessary for physical-layer bandwidth. Engineers can partition the device into dedicated clocking, transmit, receive, and management domains while using the -2 speed grade for timing margin. Power and thermal planning must account for the dense BGA and the 1 V core supply. Any migration to an FBG900 speed or temperature variant should preserve the same package footprint and be verified against the exact AMD pin file.
推薦
Digital Signal Processing
The XC7K325T-2FBG900C is a strong fit for parallel digital signal processing because its 840 dedicated DSP slices can execute multiply-accumulate operations used in filters, correlation, modulation, spectral processing, and beamforming. The 326,080 logic cells support control logic, state machines, data movement, and interface adaptation, while 16,020 Kb of block RAM supports coefficient storage, circular buffers, and wide sample paths. A practical design can assign groups of DSP slices to parallel lanes and use dedicated clocking resources to maintain deterministic throughput. The -2 speed grade provides additional timing margin over -1 alternatives, but the design must still be constrained and verified after every placement or routing change. Commercial temperature operation requires checking estimated junction temperature at worst-case ambient and activity. The same FBG900 package permits targeted speed-grade migration, although functional equivalence does not guarantee timing equivalence.
推薦
Test and Measurement Equipment
The XC7K325T-2FBG900C can implement parallel acquisition, pattern generation, timing control, and real-time analysis in advanced test equipment. Its large logic fabric supports multiple instrument channels, while 840 DSP slices accelerate filters and numeric transforms applied to sampled data. The 500 I/O sites allow direct connection to test channels, trigger logic, clock sources, and control processors, reducing the amount of external logic needed. A sensible architecture uses dedicated clock-capable inputs for precise timing and block RAM for capture buffers or correlation workspaces. The 1 V core rail requires careful decoupling and power-plane segmentation, while the 31 mm by 31 mm FBG900 package requires a high-density multilayer PCB with disciplined thermal design. For production test, engineers should use the AMD package files to validate every ball assignment and include boundary-scan or boundary-scan-adjacent production tests where supported by the complete design configuration.
推薦
Embedded Video and Image Processing
The XC7K325T-2FBG900C is applicable to embedded image-processing systems that need parallel pixel operations without relying entirely on an external processor. Its DSP slices can accelerate filters and arithmetic, while 326,080 logic cells can accommodate row buffers, color conversion, motion detection, and control pipelines. Block RAM provides distributed line buffers, although frame-scale storage may still require external DDR memory connected through the available I/O. The 500-pin count allows multiple video interfaces and control signals to coexist, and the -2 grade can improve timing margin for demanding pipelines. Clock-domain crossings must be implemented explicitly, and high-speed memory interfaces should use length matching and controlled impedance. Since the C suffix targets commercial junction temperatures from 0°C to 85°C, thermal verification is essential in enclosed systems. An FBG900 industrial variant should be selected when the calculated operating margin exceeds the commercial range.
推薦
Aerospace and Defense Systems
The XC7K325T-2FBG900C can support high-reliability control, telemetry, signal-processing, and data-acquisition functions where substantial programmable logic and arithmetic capacity are required. Its 840 DSP slices allow parallel filtering and modulation, while block RAM supplies deterministic local storage for telemetry buffers and digital filters. The FBG900 package exposes 500 I/O sites for sensor interfaces, communication channels, timing references, and redundant system paths. For aerospace programs, the commercial C temperature ordering code must not be assumed sufficient; the procurement specification and applicable qualification requirements must be reviewed against an appropriately rated ordering option. Radiation, reliability, and extended-temperature requirements are program-specific and are not established merely by the family name. If an industrial FBG900 grade is considered, timing, power, and thermal implications must be regenerated before schematic approval.
推薦
推薦產品摘要
工程參考資料,適用於 XC7K325T-2FBG900C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC7K325T-2FBG900I | XC7K325T-1FBG900I | XC7K325T-1FBG900C | XC7K325T-3FBG900C | XC7K325T-3FBG900I |
|---|---|---|---|---|---|---|
| Package | FBG900, 900-pin lidless FCBGA | FBG900, 900-pin lidless FCBGA | FBG900, 900-pin lidless FCBGA | FBG900, 900-pin lidless FCBGA | FBG900, 900-pin lidless FCBGA | FBG900, 900-pin lidless FCBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Logic Cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells |
| Block RAM | 16,020 Kb | 16,020 Kb | 16,020 Kb | 16,020 Kb | 16,020 Kb | 16,020 Kb |
| DSP Slices | 840 slices | 840 slices | 840 slices | 840 slices | 840 slices | 840 slices |
| Speed Grade | -2 | -2 | -1 | -1 | -3 | -3 |
| Temperature Grade | Commercial C, 0°C to 85°C junction | Industrial I | Industrial I | Commercial C, 0°C to 85°C junction | Commercial C, 0°C to 85°C junction | Industrial I |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| User I/O | 500 I/O | 500 I/O | 500 I/O | 500 I/O | 500 I/O | 500 I/O |
| Core Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
主要差異化特點
- Higher performance grade within the same FBG900 footprint (對比XC7K325T-1FBG900I)
- Commercial-temperature configuration for controlled environments (對比XC7K325T-2FBG900I)
- Substantial parallel processing capacity in one device (對比XC7K325T-1FBG900C)
設計說明
The FBG900 package has 900 balls on a 31 mm by 31 mm footprint, so the PCB must provide an exact AMD-compatible land pattern and controlled escape routing. Use the official package drawing and pinout files as the layout authority. Place decoupling close to the relevant supply balls, provide uninterrupted reference-plane paths beneath the device, and use a multilayer stack-up that supports high-speed escape and return paths without excessive via stubs.
Separate the 1 V core supply from the I/O supplies and follow the AMD power-supply recommendations for each rail. Place the required bulk and high-frequency decoupling at the associated package balls, maintain symmetrical current return paths, and verify the power-distribution network under worst-case activity. Speed-grade or temperature-grade substitutions can change dynamic power and temperature rise, so power sequencing and rail limits must be reassessed for every migration.
Estimated: thermal performance depends on the exact PCB copper area, layer count, airflow, ambient temperature, and device activity, none of which is specified here, so a junction-temperature rise cannot be stated reliably. Use the manufacturer's power-estimation guidance with the final utilization report, then calculate worst-case junction temperature from total device power and the demonstrated board thermal resistance. Validate the result in the assembled enclosure rather than relying on package dimensions alone.
Do not treat all XC7K325T orderings as interchangeable. FBG900, FFG900, and FBG676 are distinct packages, and the -1, -2, and -3 suffixes alter timing guarantees. The C and I suffixes alter temperature coverage. Before replacing the target, compare the complete ordering code, AMD package file, pin electrical types, configuration interface, voltage limits, timing constraints, and board footprint, then rerun synthesis, implementation, and timing analysis.
合規資訊
No definitive RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status was stated for the exact ordering code. Program-specific aerospace qualification must not be inferred from the Kintex-7 family name.