XC7K325T-2FBG900I - 326K-Cell Kintex-7 FPGA | AMD
MPN: XC7K325T-2FBG900I ✓ 啟用中XC7K325T-2FBG900I 概覽
A Kintex-7 FPGA is a configurable semiconductor in the FPGA and programmable-logic hierarchy. It combines programmable logic, block RAM, DSP48E1 arithmetic resources, programmable I/O, clocking, and dedicated high-speed transceivers on one device. This combination allows engineers to implement parallel data processing, protocol bridging, signal conditioning, and hardware acceleration without relying on a fixed application-specific ASIC.
The XC7K325T-2FBG900I provides 25,475 configurable logic blocks, 840 DSP48E1 slices, 16,020 Kbit of block RAM, and 16 GTX transceivers according to the manufacturer product information for this package variant. Its 500 I/Os support wide external data paths and numerous board-level connections. The 28 nm process and 1 V core voltage place the device in AMD's mainstream Kintex-7 generation, where programmable logic and dedicated transceiver resources address cost-sensitive networking, industrial, scientific, and embedded applications.
The device belongs to the Kintex-7 family, which AMD describes as providing a strong price/performance/power balance with support for mainstream standards including PCIe Gen3 and 10 Gigabit Ethernet. The 16 GTX transceivers allow high-speed serial connectivity to coexist with parallel programmable logic on the same FPGA. Designers can allocate serial interfaces according to their architecture, while DSP48E1 resources support filters, transforms, fixed-point arithmetic, and video or signal-processing pipelines.
Typical uses include 10GbE interface consolidation, industrial data acquisition, test and measurement systems, embedded control, communications infrastructure, and high-throughput digital signal processing. The large I/O count is particularly useful when a design must connect multiple buses, memory interfaces, converters, clock sources, and high-speed serial links without relying on external interface-expansion devices.
PCB design requires careful package and thermal planning because the FBG900 device uses a 900-pin lidless FCBGA with an exposed thermal interface. Follow the AMD Kintex-7 package pinout files and UG475 when assigning balls and escape-routing power, ground, clocks, transceivers, and high-speed differential pairs. Use the package-specific recommended land pattern and verify power-plane connectivity and thermal via arrays before fabrication.
This product summary consolidates the verified package, logic-resource, transceiver, and technology characteristics into an engineering-oriented reference. It also distinguishes same-footprint Kintex-7 ordering options, identifies temperature and speed-grade constraints, and highlights PCB and migration checks that are essential beyond a basic datasheet feature list.
直接替換替代品,適用於 XC7K325T-2FBG900I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC7K325T-2FBG900I (相同外形與佔位) — 差異在於 Package, Process Technology, Temperature Grade, Speed Grade, Block RAM.
XC7K325T-2FBG900C
✅ 直接替換聯絡詢價
查看資料表 →XC7K325T-1FBG900I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC7K325T-1FBG900C
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC7K325T-3FBG900I
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7K325T-3FBG900C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7K325T-2FBG900E
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7K325T-2FBG900I 最大額定值與電氣特性
| Device Type | Kintex-7 field-programmable gate array (FPGA) |
| Logic Cells | 326,080 cells |
| Configurable Logic Blocks | 25,475 CLBs |
| DSP48E1 Slices | 840 slices |
| Block RAM | 16,020 Kbit |
| GTX Transceivers | 16 transceivers |
| User I/O | 500 I/Os |
| Total Package Pins | 900 pins |
| 封裝 | FBG900 lidless FCBGA |
| Process Technology | 28 nm CMOS |
| Core Supply Voltage | 1 V |
| Speed Grade | -2 |
| Temperature Grade Suffix | I industrial |
| High-Serial Interface Support | PCIe Gen3 and 10 Gigabit Ethernet |
| Programming Technology | Configurable FPGA logic |
| 安裝類型 | Surface mount |
| RoHS 狀態 | Refer to the orderable-part comparison information |
| REACH Status | Refer to the orderable-part comparison information |
XC7K325T-2FBG900I fbg900 lidless fcbga 腳位配置指南
XC7K325T-2FBG900I(fbg900 lidless fcbga 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC7K325T-2FBG900I.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC7K325T-2FBG900I 適用於 6 應用s: 10 Gigabit Ethernet Interface Consolidation, Industrial Data Acquisition, Communications and Protocol Bridging, Digital Signal Processing, Test and Measurement Instrumentation, Embedded Video and Image Processing.
10 Gigabit Ethernet Interface Consolidation
The XC7K325T-2FBG900I fits network-interface consolidation because it combines 16 GTX transceivers with 326,080 logic cells and 500 I/Os in one programmable device. The GTX resources can implement multiple 10 Gigabit Ethernet interfaces while the programmable logic handles packet processing, buffering, management, and interfaces to host processors or memory. Its -2 speed grade provides margin for demanding timing paths, while the large I/O count supports physical-layer devices, status signals, clocks, and control interfaces. The main design consideration is transceiver power and thermal management because 16 active high-speed lanes can create a substantial heat load that must be reflected in the FBG900 power plan, via layout, and enclosure cooling.
推薦
Industrial Data Acquisition
The XC7K325T-2FBG900I is suitable for industrial acquisition systems that need many simultaneous inputs, local real-time processing, and deterministic programmable logic. Its 500 I/Os can connect ADC and DAC channels, sensors, counters, memory interfaces, and communication peripherals, while 840 DSP48E1 slices can perform filtering, modulation, and numerical processing before data is transferred onward. The industrial ordering suffix identifies the wider temperature-class option used in factory equipment. Engineers should budget power according to sampled I/O activity and active DSP utilization, then use the package-specific via array and copper planes to remove heat from the lidless FBG900 device.
推薦
Communications and Protocol Bridging
The XC7K325T-2FBG900I can bridge multiple communication formats in telecommunications, test, and embedded infrastructure equipment. Programmable logic supports protocol conversion, framing, error detection, flow control, and buffer management, while 16 GTX transceivers provide the high-speed serial resources needed for links such as 10 Gigabit Ethernet. The remaining logic and 500 I/Os accommodate parallel backplanes, control processors, status registers, and external memories. Because this is a large -2 grade Kintex-7 device, implementation should consider routing congestion and transient current; preserve the recommended power and ground planes, and use the AMD package pinout files for every transceiver and clock-capable ball.
推薦
Digital Signal Processing
The XC7K325T-2FBG900I provides 840 DSP48E1 slices and 16,020 Kbit of block RAM, creating a useful resource mix for FIR filters, correlation, waveform generation, FFT-oriented pipelines, and fixed-point control processing. The 25,475 CLBs support surrounding control logic, interfaces, scheduling, and data movement, allowing a complete processing chain to fit within one device instead of requiring a separate ASIC or processor. For high-throughput designs, the -2 speed grade helps achieve tighter pipeline timing than the -1 grade. Validate arithmetic throughput with the target toolchain and check memory bandwidth because block RAM and DSP utilization can become the limiting resources before raw logic-cell capacity is exhausted.
推薦
Test and Measurement Instrumentation
The XC7K325T-2FBG900I fits modular test and measurement equipment requiring flexible timing, many instrument I/Os, real-time processing, and high-speed data paths. The programmable architecture can implement acquisition, triggering, pattern generation, digital signal processing, and communication interfaces without changing the hardware for each new test plan. Its 500 I/Os provide ample connections for DUT fixtures, converters, clocks, triggers, and front-panel logic, while 16 GTX transceivers support high-speed test data or communication channels. The device should be paired with careful clocking and isolation because acquisition accuracy depends on clean references, controlled impedance routing, and separated power paths rather than only on the FPGA's internal logic capacity.
推薦
Embedded Video and Image Processing
The XC7K325T-2FBG900I can support embedded video and image-processing systems that require parallel pixel interfaces, real-time processing, and programmable control. The 500 I/Os accommodate camera or display interfaces, memory, and peripheral links, while the 840 DSP48E1 slices execute pixel filtering, color conversion, scaling, and other arithmetic operations. Its -2 speed grade is appropriate when timing margins are needed for sustained video pipelines, and 16 GTX transceivers can support high-speed links between image sensors, processing stages, and external storage. Video designs must still constrain clock domains, use appropriate I/O standards, and validate memory bandwidth; the FBG900 package also requires careful escape routing and thermal via implementation.
推薦
推薦產品摘要
工程參考資料,適用於 XC7K325T-2FBG900I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC7K325T-2FBG900C | XC7K325T-1FBG900I | XC7K325T-1FBG900C | XC7K325T-3FBG900I | XC7K325T-3FBG900C |
|---|---|---|---|---|---|---|
| Package | FBG900 lidless FCBGA | FBG900 lidless FCBGA | FBG900 lidless FCBGA | FBG900 lidless FCBGA | FBG900 lidless FCBGA | FBG900 lidless FCBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Logic Cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells |
| DSP48E1 Slices | 840 slices | 840 slices | 840 slices | 840 slices | 840 slices | 840 slices |
| GTX Transceivers | 16 transceivers | 16 transceivers | 16 transceivers | 16 transceivers | 16 transceivers | 16 transceivers |
| Block RAM | 16,020 Kbit | 16,020 Kbit | 16,020 Kbit | 16,020 Kbit | 16,020 Kbit | 16,020 Kbit |
| Speed Grade | -2 | -2 | -1 | -1 | -3 | -3 |
| Temperature Class Suffix | I industrial | C commercial | I industrial | C commercial | I industrial | C commercial |
| Process Technology | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS |
| I/O Count | 500 I/Os | 500 I/Os | 500 I/Os | 500 I/Os | 500 I/Os | 500 I/Os |
主要差異化特點
- Combines a 326,080-cell logic fabric with 16 dedicated GTX transceivers (對比XC7K325T-1FBG900I)
- Industrial-temperature ordering option in the same FBG900 footprint (對比XC7K325T-2FBG900C)
- Provides the -2 speed grade without changing the 900-pin lidless FCBGA package (對比XC7K325T-3FBG900I)
設計說明
Use the AMD Kintex-7 Package Device Pinout Files and UG475 to assign every FBG900 ball. In particular, verify configuration pins, clock-capable inputs, memory interface constraints, transceiver reference-clock and power connections, and the package's exposed thermal interface. Route high-speed GTX differential pairs with continuous reference planes and controlled impedance, and avoid placing test-only or unused balls without checking the package guidance.
The FBG900 package is lidless and concentrates heat beneath the device. Implement the package-specific via array, uninterrupted power and ground planes, and the largest practical copper area, then account for board and enclosure heat-flow paths. Estimated thermal calculations must use actual FPGA utilization, I/O activity, transceiver state, ambient temperature, and airflow; a datasheet-only power value does not represent a mixed design operating at full activity.
Build the power tree from the AMD power-estimation results for the final implementation rather than the nominal 1 V core value alone. Separate sequencing requirements for core, auxiliary, I/O, and transceiver supplies, and provide local high-frequency decoupling at the package power balls. Confirm transient response, voltage tolerance, ramp limits, and current margin at worst-case activity before releasing the PCB design.
Create implementation constraints for all external clocks, memory interfaces, and high-speed serial links. Use the correct I/O standards and bank-compatible voltage combinations, reserve clock-capable pins for clock routing, and validate write timing, hold timing, and bus skew in post-route timing reports. For GTX links, follow the reference design and constraint methodology associated with the selected transceiver standard.
合規資訊
The available comparison information identifies RoHS and REACH as relevant attributes but does not provide a definitive compliance statement for the exact orderable part. Confirm the current declarations with AMD using the exact MPN.