XC7K420T-1FFG901C 416960-Cell Kintex-7 FPGA | AMD
MPN: XC7K420T-1FFG901C ✓ 啟用中XC7K420T-1FFG901C 概覽
A field-programmable gate array is a programmable logic device in which configurable logic blocks, programmable input/output resources, memory resources, and dedicated hard processors implement digital systems. Within the semiconductor hierarchy, an FPGA belongs to programmable logic, combines logic and memory functions, and becomes an application-specific accelerator after configuration. The Kintex-7 family sits between lower-density FPGA families and higher-end devices, making it suitable for demanding signal-processing, communications, networking, and industrial-control designs.
The XC7K420T-1FFG901C provides 416960 logic cells and 380 user I/O in a compact 901-pin FCBGA. Its 28 nm fabrication technology supports a strong balance of performance, power, and cost. AMD identifies PCIe Gen3 and 10 Gigabit Ethernet as mainstream standards supported by the Kintex-7 family. The large pin count provides substantial connectivity for high-speed transceivers, memory interfaces, clocks, control signals, and external peripherals, while the high logic-cell count supports parallel processing, DSP pipelines, protocol termination, and redundant logic.
The -1 ordering code identifies the Kintex-7 speed grade, while FFG901 identifies the package used by this device. The C suffix denotes the commercial temperature grade. The FFG901 configuration is mechanically distinct from smaller FFG packages and from FFG1156, so board replacement should be based on the AMD package drawing and complete pinout rather than device name similarity alone. Configuration memories, programming interfaces, clock resources, and power rails must also be considered before using another Kintex-7 part as a substitute.
Typical applications include 10 Gigabit Ethernet packet processing, PCIe Gen3 endpoint or bridge designs, high-throughput digital filtering, industrial video and imaging systems, communications infrastructure, radar and signal-processing equipment, and high-speed storage controllers. The 380 I/O resources and 416960 logic cells are especially useful when a design combines wide parallel interfaces with substantial real-time processing.
Power and thermal design require careful attention because a large Kintex-7 device can consume substantial dynamic power depending on clocking, resource utilization, I/O activity, and voltage settings. Follow the AMD power, thermal, and package guidance when assigning rails, designing the power distribution network, selecting decoupling, and calculating board-level temperature rise. Use the AMD Kintex-7 package pinout files to confirm every board signal and exposed thermal connection.
This page combines the verified device identity, package and family characteristics, strict drop-in alternatives, engineering design guidance, application fit, and parameter comparisons. It helps engineers evaluate PCB reuse, performance-grade differences, thermal constraints, and sourcing requirements without treating merely similar FPGA part numbers as equivalent replacements.
直接替換替代品,適用於 XC7K420T-1FFG901C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC7K420T-1FFG901C (相同外形與佔位) — 差異在於 Logic Cells, Block RAM, Device Type, Package, Package Type.
XC7K420T-2FFG901C
✅ 直接替換聯絡詢價
查看資料表 →XC7K420T-1FFG901E
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7K420T-2FFG901E
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7K420T-1FFG901I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC7K420T-2FFG901I
✅ 直接替換聯絡詢價
查看資料表 →XC7K420T-1FFG901C 最大額定值與電氣特性
| Device Type | Kintex-7 Field Programmable Gate Array (FPGA) |
| Logic Cells | 416960 cells |
| User I/O Count | 380 I/O |
| Process Technology | 28 nm |
| Core Voltage | 1 V |
| Speed Grade | -1 |
| Temperature Grade | Commercial (C) |
| 封裝 | 901-pin FCBGA (FFG901) |
| Package Type | 900-BBGA / FCBGA |
| 腳位數 | 901 pins |
| Device Family | Kintex-7 |
| Supported High-Speed Standard | PCIe Gen3 |
| Supported Network Standard | 10 Gigabit Ethernet |
| RoHS 狀態 | Compliant |
| Lead-Free Status | Lead Free |
XC7K420T-1FFG901C 900-bbga / fcbga 腳位配置指南
XC7K420T-1FFG901C(900-bbga / fcbga 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC7K420T-1FFG901C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC7K420T-1FFG901C 適用於 6 應用s: 10 Gigabit Ethernet Packet Processing, PCIe Gen3 Endpoint and Bridge Designs, Industrial Video and Imaging Systems, Communications Infrastructure, Radar and Real-Time Signal Processing, High-Speed Storage and Data Movement.
10 Gigabit Ethernet Packet Processing
The XC7K420T-1FFG901C is well suited to 10 Gigabit Ethernet line-card and network-interface designs because its 416960 logic cells support parallel packet classification, lookup, buffering, and traffic processing. The 380 user I/O provide extensive connectivity for high-speed transceivers, status signals, clocks, and control interfaces. According to AMD, Kintex-7 devices support 10 Gigabit Ethernet, allowing the FPGA to consolidate functions that might otherwise require multiple programmable devices. Engineering teams should still budget the required transceivers, external memory, reference clocks, and thermal design around the large FFG901 package.
推薦
PCIe Gen3 Endpoint and Bridge Designs
The XC7K420T-1FFG901C can implement PCIe Gen3 endpoint, bridge, and accelerator-interface functions when lane count, timing, and power requirements fit the selected Kintex-7 resources. Its 416960 logic cells allow designers to combine the PCIe interface with DMA engines, packet processing, or custom application logic, while 380 I/O support ancillary control and status signals. According to AMD, PCIe Gen3 is a mainstream standard supported by Kintex-7. The board must follow AMD's high-speed layout guidance, including controlled-length routing, suitable reference clocks, and appropriate power-distribution design.
推薦
Industrial Video and Imaging Systems
The XC7K420T-1FFG901C is appropriate for industrial imaging systems that combine multiple sensor interfaces, real-time filtering, color processing, and image compression in one programmable device. The 380 I/O permit parallel sensor and interface connectivity, while the large logic-cell count supports parallel pipelines and configurable processing stages. According to the AMD Kintex-7 family information, the device provides substantial programmable logic and high I/O availability at 28 nm. A production design should verify sensor timing, memory bandwidth, clocking topology, and thermal performance in the final enclosure because imaging workloads can produce high dynamic power.
推薦
Communications Infrastructure
The XC7K420T-1FFG901C fits communications infrastructure equipment requiring programmable data paths, protocol adaptation, and parallel interface aggregation. Its 416960 logic cells can implement multiple concurrent channels or combine DSP-style processing with control logic, and the 380 I/O support external memory and transceiver connections. According to AMD, Kintex-7 devices target strong price/performance and power efficiency at 28 nm. Deployment in line cards, radio units, or aggregation equipment requires careful review of clock jitter, memory timing, power integrity, and conducted-noise requirements.
推薦
Radar and Real-Time Signal Processing
The XC7K420T-1FFG901C supports radar, communications, and industrial signal-processing systems that require parallel numerical operations and flexible data acquisition. The large Kintex-7 logic resource count can host multiple processing pipelines, correlation stages, spectral transforms, or adaptive-control functions, while 380 I/O accommodate parallel converters, memory banks, and synchronization signals. According to AMD's Kintex-7 family page, the family combines high DSP capability with cost-effective packaging and mainstream high-speed connectivity. Designers should use AMD timing and power analysis to balance pipeline depth, clock frequency, resource utilization, and thermal dissipation.
推薦
High-Speed Storage and Data Movement
The XC7K420T-1FFG901C is suitable for storage controllers, data movers, and high-bandwidth processing systems where the FPGA must aggregate several interfaces and execute protocol logic. Its 380 I/O allow parallel data paths to external memory and storage controllers, while 416960 logic cells support queues, descriptors, error handling, and concurrent transfers. According to the AMD XC7K420T documentation, the device is fabricated at 28 nm and belongs to the Kintex-7 family with extensive programmable resources. Successful implementation depends on correct memory timing, FPGA internal-memory bandwidth, clocking, and board-level signal integrity.
推薦
推薦產品摘要
工程參考資料,適用於 XC7K420T-1FFG901C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC7K420T-2FFG901C | XC7K420T-1FFG901E | XC7K420T-2FFG901E | XC7K420T-1FFG901I | XC7K420T-2FFG901I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 901-FCBGA (FFG901) | 901-FCBGA (FFG901) | 901-FCBGA (FFG901) | 901-FCBGA (FFG901) | 901-FCBGA (FFG901) | 901-FCBGA (FFG901) |
| Device Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Speed Grade | -1 | -2 | -1 | -2 | -1 | -2 |
| Temperature Grade | Commercial (C) | Commercial (C) | Extended (E) | Extended (E) | Industrial (I) | Industrial (I) |
| Logic Cells | 416960 cells | 416960 cells | 416960 cells | 416960 cells | 416960 cells | 416960 cells |
| User I/O Count | 380 I/O | 380 I/O | 380 I/O | 380 I/O | 380 I/O | 380 I/O |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Supported High-Speed Standards | PCIe Gen3 and 10 Gigabit Ethernet | PCIe Gen3 and 10 Gigabit Ethernet | PCIe Gen3 and 10 Gigabit Ethernet | PCIe Gen3 and 10 Gigabit Ethernet | PCIe Gen3 and 10 Gigabit Ethernet | PCIe Gen3 and 10 Gigabit Ethernet |
主要差異化特點
- Commercial-temperature -1 grade provides a distinct performance profile from the -2 alternative (對比XC7K420T-2FFG901C)
- Industrial-temperature option retains the same -1 speed grade and package (對比XC7K420T-1FFG901I)
- Extended-temperature option adds environmental coverage without changing package geometry (對比XC7K420T-1FFG901E)
設計說明
Estimate FPGA junction temperature from actual power and the effective board thermal path rather than relying on a generic package value. Estimated: use measured or design-tool-reported total device power, multiply it by the effective junction-to-ambient thermal resistance in C/W, and add the result to ambient temperature. Dense Kintex-7 designs can vary substantially with clock rate, I/O activity, and utilized resources, so include copper area, airflow, adjacent components, and enclosure conditions in the thermal model.
Use the AMD FFG901 package drawing and Kintex-7 package pinout files as the PCB-layout authority. Place decoupling and power-distribution structures directly beneath the appropriate supply balls, preserve the exposed thermal land and its via pattern, and maintain separation between aggressors and sensitive configuration or clock pins. Do not route a replacement candidate until the selected speed and temperature grade has been checked against the original power, timing, and environmental design.
Treat high-speed transceiver, memory, and clock nets as controlled-impedance channels rather than ordinary routing. Follow AMD's Kintex-7 pinout files and device guidance for ball assignments, clock-capable inputs, and permitted configurations. Keep clock distribution deterministic, use matched-length techniques where required by the interface, minimize stubs and unnecessary vias, and evaluate channel loss, skew, jitter, and return-path continuity during schematic and layout review.
The principal substitution risk is treating a different Kintex-7 order code as identical merely because its name is similar. The -1 and -2 codes change speed behavior, while C, E, and I identify different temperature classes. Confirm the exact package, exposed-pad connection, supported configuration method, clock resources, security features, operating-temperature requirements, and timing closure before approving a replacement. FFG1156 devices are not PCB drop-in alternatives for FFG901 designs.
合規資訊
The AMD product comparison identifies the XC7K420T family as RoHS compliant and lead-free. REACH, halogen-free status, and conflict-minerals status are not established by the available product information.