AMD

XC7Z100-L2FFG1156I - 800MHz Zynq-7000 SoC | AMD Xilinx

MPN: XC7Z100-L2FFG1156I ✓ 啟用中
1 V Vdss 1156-ball FCBGA Package 800 MHz Speed
MOQ: 1 |

XC7Z100-L2FFG1156I 概覽

The AMD Xilinx XC7Z100-L2FFG1156I is a Zynq-7000 adaptive system-on-chip combining a dual-core ARM Cortex-A9 MPCore processing system with CoreSight debug technology and Kintex-7 FPGA programmable logic. The device contains 444,000 logic cells, operates at an 800 MHz processor core speed, and is packaged in a 1156-ball FCBGA measuring 35 mm by 35 mm. Its combination of hard processor logic, programmable fabric, high-speed connectivity, and integrated debug support makes it suitable for complex embedded systems requiring both software control and hardware acceleration.

A Zynq-7000 SoC belongs to the heterogeneous computing hierarchy that combines an ARM application processor and FPGA logic in one package. Unlike a standalone FPGA, the device can execute operating-system software while programmable logic handles parallel data paths, protocol handling, image processing, or low-latency control. The Kintex-7 fabric provides the logic resources needed for parallel architectures, while the Cortex-A9 subsystem supports conventional software execution through its ARM instruction-set architecture.

Key device characteristics include 444,000 FPGA logic cells, an 800 MHz Cortex-A9 core speed, dual ARM Cortex-A9 MPCore processing, and CoreSight debugging. The XC7Z100 designation identifies the highest-density member of the Zynq-7000 portfolio. The -2 speed designation and industrial temperature suffix distinguish this ordering code from other XC7Z100 variants. The large FCBGA package exposes a high-density mix of FPGA I/O, dedicated memory interfaces, serial transceivers, power pins, ground pins, and processor signals.

The device is intended for industrial embedded processing, machine vision, control systems, communications equipment, and test-and-measurement platforms. In these systems, the processor subsystem can manage software workloads, control flow, networking, and operating-system services, while FPGA logic accelerates deterministic operations that benefit from parallel processing. CoreSight support assists designers with hardware-assisted debug, trace, and verification of programmable logic and processor execution.

PCB implementation requires careful attention to the 1156-ball FCBGA escape routing, power delivery, decoupling, and thermal management. Use the AMD package pinout and UG865 package guidance when assigning balls and laying out the board. The high pin count makes via-in-pad or fanout techniques potentially necessary, while high-speed memory and transceiver interfaces require length matching and continuous return-path planning.

This page combines the manufacturer-device identity, searchable package and processor specifications, verified source links, practical implementation guidance, and a conservative assessment of drop-in alternatives. Because the exact XC7Z100-L2FFG1156I package and pin assignment details are not reproduced here, use the AMD Zynq-7000 package placement diagram and device pinout files before fabrication.

直接替換替代品,適用於 XC7Z100-L2FFG1156I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

XC7Z100-2FFG1156I

✅ 直接替換
📦 1156-ball FCBGA (35 mm x 35 mm)
Uses the same 1156-ball FCBGA package and 444,000-cell Zynq-7000 architecture; ordering-code speed and temperature details must be confirmed before substitution.

📋 參考替代品(不在目錄中)

XC7Z100-L2FFG1156I 最大額定值與電氣特性

Product Type Zynq-7000 adaptive system-on-chip (SoC)
FPGA Family Kintex-7 FPGA fabric
Processor Cores 2 ARM Cortex-A9 MPCore cores
Processor Core Speed 800 MHz
FPGA Logic Cells 444,000 logic cells
Programmable Technology 28 nm
Core Supply Voltage 1 V
Debug Support CoreSight
封裝 1156-ball FCBGA
Package Dimensions 35 mm x 35 mm
Ball Count 1156 balls
安裝類型 Surface mount
Speed Grade -2
Temperature Grade Industrial
Datasheet File Size 717 KB
Datasheet Publication Date 2016-07-28

XC7Z100-L2FFG1156I 35 mm x 35 mm 腳位配置指南

XC7Z100-L2FFG1156I(35 mm x 35 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

XC7Z100-L2FFG1156I 的 35 mm x 35 mm 封裝腳位圖

無詳細腳位定義資料: XC7Z100-L2FFG1156I.

請參閱 資料表 以查看完整腳位配置。

典型應用

XC7Z100-L2FFG1156I 適用於 6 應用s: Industrial Machine Vision, Programmable Logic Control, Communications Infrastructure, Test and Measurement, Video Processing, Aerospace and Defense Processing.

🏭

Industrial Machine Vision

The XC7Z100-L2FFG1156I fits industrial machine-vision systems that combine sensor acquisition, parallel image processing, and higher-level control. Its 444,000 Kintex-7 logic cells can accelerate pixel operations, filtering, thresholding, and data reduction, while the dual ARM Cortex-A9 subsystem at 800 MHz can run camera control, image analysis, communications, and supervisory software. Placing both functions in one package reduces interprocessor data movement compared with a separate processor-and-FPGA architecture. The implementation must still account for the 1156-ball FCBGA escape requirements, DDR memory routing, transceiver or sensor interfaces, power-decoupling density, and thermal performance under continuous imaging workloads.

🏭

Programmable Logic Control

The XC7Z100-L2FFG1156I is suited to programmable logic control systems requiring deterministic I/O handling alongside a hosted application processor. FPGA fabric can implement timing-critical state machines, motor-control interfaces, encoder processing, or protocol engines, while the 800 MHz dual-core Cortex-A9 subsystem executes control algorithms, diagnostics, and communication services. The 444,000 logic cells provide substantial room for parallel datapaths without using another external FPGA. For industrial deployment, engineers should partition real-time functions into programmable logic, reserve the processor for supervisory tasks, and validate timing and I/O standards against the package pinout before releasing the PCB.

🌐

Communications Infrastructure

The XC7Z100-L2FFG1156I can support communications equipment that benefits from combining packet processing in software with hardware-assisted data paths. The ARM Cortex-A9 subsystem handles the control plane, operating-system services, management protocols, and higher-layer processing, while the 444,000-cell Kintex-7 fabric can implement packet classification, buffering, filtering, or custom interfaces. Its 800 MHz processor speed supports responsive management workloads, and the large FPGA fabric allows protocol-specific logic to be consolidated with the processor. Board-level implementation requires careful treatment of high-speed transceiver paths, reference clocks, memory topology, power integrity, and thermal dissipation rather than treating the large FCBGA as a conventional low-pin-count device.

🔧

Test and Measurement

The XC7Z100-L2FFG1156I is appropriate for test-and-measurement instruments that need flexible acquisition, timing, and signal-processing logic alongside an embedded control processor. FPGA fabric can implement parallel ADC channels, digital pattern generation, trigger logic, and real-time processing, while the dual-core ARM subsystem manages instrument control, calibration, data storage, and user interfaces. The 444,000 logic cells provide a high-capacity fabric for consolidating multiple channels, and the 800 MHz Cortex-A9 speed supports an embedded control application. Success depends on disciplined clock planning, low-noise power design, controlled-impedance routing, DDR memory implementation, and thermal testing across the intended ambient range.

📺

Video Processing

The XC7Z100-L2FFG1156I fits video-processing systems where software control and real-time pixel manipulation must coexist. The Kintex-7 FPGA fabric can process multiple video streams, perform scaling or filtering, and interface to sensors or displays through parallel, serial, or network-based pathways. The dual-core Cortex-A9 subsystem at 800 MHz can execute configuration, analytics, buffering management, and network services. Consolidating these functions in one SoC can reduce board area and latency relative to a discrete processor and FPGA design. Engineers should establish early whether the chosen external memory, display interface, and synchronization network meet the required throughput, then validate power cycling and signal integrity on the 1156-ball FCBGA layout.

✈️

Aerospace and Defense Processing

The XC7Z100-L2FFG1156I can serve as a high-density adaptive computing platform in aerospace, defense, and ruggedized industrial systems that combine real-time signal processing with embedded control software. Its 444,000-cell Kintex-7 fabric supports parallel algorithms and configurable I/O, while the 800 MHz dual-core ARM subsystem supports mission software, health monitoring, and configuration management. The large FPGA resource count can consolidate functions that would otherwise require multiple programmable devices, while CoreSight aids hardware-assisted verification. Qualification for a specific flight or defense application must be established independently; the part's industrial suffix does not itself establish AEC-Q100, MIL-STD, or program-specific qualification.

What is the AMD Xilinx XC7Z100-L2FFG1156I?
The XC7Z100-L2FFG1156I is a Zynq-7000 adaptive system-on-chip that integrates a dual-core ARM Cortex-A9 MPCore subsystem with a 444,000-cell Kintex-7 FPGA fabric. According to the AMD/Xilinx product information identified on distributor listings, its processor operates at 800 MHz and it uses a 1156-ball FCBGA package measuring 35 mm by 35 mm.
How much FPGA logic and processor performance does XC7Z100-L2FFG1156I provide?
The XC7Z100-L2FFG1156I provides 444,000 Kintex-7 logic cells and an 800 MHz ARM Cortex-A9 core speed. According to the AMD/Xilinx specifications repeated by component distributors, the device combines two Cortex-A9 MPCore processors with programmable FPGA logic in a single 1156-ball FCBGA package.
Where can I download the XC7Z100-L2FFG1156I datasheet PDF?
The XC7Z100-L2FFG1156I datasheet PDF is available from the AMD/Xilinx document hosted at https://www.lcsc.com/datasheet/C1550488.pdf. AMD also publishes the Zynq-7000 package pinout resources and the UG585 Zynq-7000 SoC Technical Reference Manual, which are required for complete board-level implementation.
Where can I find the XC7Z100-FFG1156 pinout and package placement?
The official XC7Z100-FFG1156 package placement diagram is published in the AMD Zynq-7000 Technical Reference Manual at docs.amd.com, and AMD provides separate Zynq-7000 package pinout files in TXT and CSV formats. Use these documents to map every 1156-ball location and confirm the selected bank voltage before PCB routing.
Is XC7Z100-L2FFG1156I suitable for industrial embedded systems?
The XC7Z100-L2FFG1156I carries an industrial temperature-grade suffix and integrates a processor with programmable logic, making it suitable for industrial embedded systems. According to the AMD/Xilinx ordering information, it provides an 800 MHz dual-core Cortex-A9 subsystem, 444,000 FPGA logic cells, and CoreSight debug support.
What is the difference between a Zynq-7000 SoC and a conventional FPGA?
A Zynq-7000 SoC combines an ARM Cortex-A9 processor subsystem with Kintex-7 programmable logic on one device. The processor executes sequential software while the FPGA fabric performs parallel or custom hardware functions, whereas a conventional FPGA implements its principal control functions primarily through programmable logic blocks and soft processors.
What can replace the XC7Z100-L2FFG1156I as a drop-in part?
The closest supported same-package candidate is the AMD XC7Z100-2FFG1156I, which uses the same 1156-ball FCBGA package and 444,000-cell Zynq-7000 architecture. Exact drop-in use still requires AMD device documentation to confirm speed-grade, temperature-grade, power, and legacy-status compatibility for the specific design.
Is XC7Z100-2FFG1156I the same as XC7Z100-L2FFG1156I?
No. The XC7Z100-2FFG1156I and XC7Z100-L2FFG1156I share the Zynq-7000 device family and 1156-ball FCBGA package, but their complete ordering codes are not identical. The XC7Z100-2FFG1156I is a distinct ordering configuration, so engineers must compare the AMD device table before treating it as a replacement.
XC7Z100-L2FFG1156I vs XC7Z100-2FFG1156I: which one should be selected?
The XC7Z100-L2FFG1156I should be selected when its exact L2 industrial ordering configuration is required, while the XC7Z100-2FFG1156I is a candidate only after its speed and temperature attributes are confirmed. Both are identified as 800 MHz, 444,000-cell Zynq-7000 devices in a 1156-ball FCBGA package, but ordering suffixes can materially affect qualification.
When should I choose XC7Z100-L2FFG1156I over a smaller Zynq device?
Choose the XC7Z100-L2FFG1156I when a design needs the highest-density member of the Zynq-7000 family, with 444,000 logic cells and substantial programmable resources alongside the dual-core processor. Smaller devices may be preferable when the required logic, I/O, memory interfaces, transceivers, and processing throughput fit within their lower resource counts.
Is XC7Z100-L2FFG1156I suitable for machine vision and industrial control?
The XC7Z100-L2FFG1156I is suitable for machine vision and industrial control because its 444,000-cell FPGA fabric can implement parallel image-processing pipelines while the 800 MHz dual-core ARM subsystem manages control software and external communication. Actual camera, sensor, isolation, and safety requirements must be evaluated separately from the SoC's processor and logic capabilities.
How should the 1156-ball FCBGA power and decoupling network be designed?
The 1156-ball FCBGA power network should follow the AMD reference design and device power-supply guidance, including dedicated connections for each required supply rail and dense local decoupling. Place the smallest-capacitance decoupling capacitors directly beneath or adjacent to the device balls, and use via structures and copper planes to minimize inductance and transient impedance.
How should a PCB route high-speed signals around XC7Z100-L2FFG1156I?
Route high-speed interfaces as controlled-impedance, length-matched nets with continuous reference planes and carefully managed return paths. The AMD package placement diagram and device pinout files should be used before fanout; memory interfaces, transceivers, clock inputs, and other speed-sensitive nets must not be improvised from generic package geometry.
Where can I buy XC7Z100-L2FFG1156I and check commercial availability?
Use the Request a Quote form on this page to ask for XC7Z100-L2FFG1156I availability, current lead time, minimum order quantity, and authorized-channel sourcing. The manufacturer-device identity is XC7Z100-L2FFG1156I, so include the complete suffix when requesting a quote to avoid confusion with other XC7Z100 speed and package options.
What price and lead time apply to XC7Z100-L2FFG1156I?
Current commercial terms for the XC7Z100-L2FFG1156I should be requested through the Request a Quote form on this page. The form can return current unit pricing, quantity breaks, stock status, lead time, and minimum order quantity for the complete 1156-ball FCBGA ordering code.
Is XC7Z100-L2FFG1156I currently in stock?
The current stock position for XC7Z100-L2FFG1156I should be confirmed through the Request a Quote form on this page by entering the complete MPN and required quantity. Because availability can change with market demand and allocation, request the quantity, target date, and acceptable packaging details with the inquiry.
What are the key specifications of XC7Z100-L2FFG1156I that engineers should know?
The XC7Z100-L2FFG1156I is a 28 nm Zynq-7000 adaptive SoC with two ARM Cortex-A9 MPCore processors, an 800 MHz core speed, 444,000 Kintex-7 logic cells, CoreSight debug support, and a 1156-ball FCBGA package measuring 35 mm by 35 mm. Its principal engineering value is the combination of sequential software processing and parallel programmable hardware in one device.

工程參考資料,適用於 XC7Z100-L2FFG1156I — 比較、設計指引及合規資訊。

選型指南

Choose the XC7Z100-L2FFG1156I when the design requires the L2 industrial ordering configuration, a dual-core ARM Cortex-A9 subsystem running at 800 MHz, and a 444,000-cell Kintex-7 fabric in a 1156-ball FCBGA. It is especially appropriate when software control and parallel hardware processing must coexist in one adaptive SoC. The XC7Z100-2FFG1156I is the only clearly supported same-package candidate identified here and may suit an equivalent architecture, but its complete ordering attributes must be checked against the AMD device table before substitution. Smaller Zynq or standalone FPGA choices can be preferable when their resource counts meet the design and they offer a simpler board or thermal implementation. No cross-brand drop-in alternative is established because processor architecture, tool flow, package construction, and proprietary device features make generic interchange unsafe.

與替代品比較

參數 本產品 XC7Z100-2FFG1156I
Brand AMD AMD
Package 1156-ball FCBGA (35 mm x 35 mm) 1156-ball FCBGA (35 mm x 35 mm)
Processor Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore
Core Speed 800 MHz 800 MHz
FPGA Logic Cells 444,000 logic cells 444,000 logic cells
FPGA Fabric Kintex-7 Kintex-7
Process Technology 28 nm 28 nm
Core Supply Voltage 1 V 1 V
Debug Support CoreSight CoreSight
Ordering Suffix -L2FFG1156I -2FFG1156I

主要差異化特點

  • Combines an 800 MHz dual-core ARM processor with programmable Kintex-7 logic (對比XC7Z100-2FFG1156I)
  • Provides the highest-density Zynq-7000 resource level identified for this device family (對比XC7Z100-2FFG1156I)
  • Combines software processing and hardware acceleration in one 1156-ball package (對比XC7Z100-2FFG1156I)

設計說明

Plan the 1156-ball FCBGA escape before committing the stack-up. Use the AMD XC7Z100-FFG1156 package placement diagram and official pinout files to identify power, ground, high-speed transceiver, memory, clock, and general I/O balls. Verify every ball location mechanically against the selected package drawing because package suffixes and device variants can differ in bonding, power, or configuration details.

Implement each required power rail as a separate, low-impedance delivery network with dense local decoupling at the device. Place the smallest-value capacitors directly beneath or adjacent to the FCBGA balls, use multiple vias for each supply and ground connection, and keep sensitive routing away from switching-converter power stages. Validate voltage tolerance, sequencing, startup behavior, and transient response against the AMD reference design.

Estimate junction temperature from total device dissipation, the PCB thermal resistance, and the intended ambient temperature before defining the heatsink and airflow strategy. The FCBGA has many short thermal connections, but package performance still depends on via arrays, copper distribution, board construction, enclosure heat transfer, and neighboring heat sources. Test the assembled PCB under worst-case processor and FPGA utilization rather than relying only on a nominal calculation.

Use continuous reference planes and controlled-impedance routing for DDR memory, clocks, serial transceivers, and other high-speed interfaces. Match clock and data routing according to the AMD device and design-migration guidance, and avoid plane splits, stubs, and right-angle transitions where they create reflection or crosstalk. Validate the final stack-up with field solvers and verify eye diagrams on production hardware.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The industrial temperature suffix does not establish AEC-Q100 qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the cited device information and remain unknown.

相關搜尋

xc7z100 2ffg900i xc7z100 2ffg1156i xc7z100 1ffg900i xc7z100 2ffg900 xc7z100 2ffg900i datasheet xc7z100 evaluation board xc7z100 datasheet xc7z100 price xc7z100 dev board XC7Z100-L2FFG1156I pinout XC7Z100-L2FFG1156I equivalent XC7Z100-L2FFG1156I replacement AMD XC7Z100-L2FFG1156I XC7Z100-L2FFG1156I 1156 FCBGA

相關元件與詞彙

AMD AMD Xilinx XC7Z100-L2FFG1156I XC7Z100-2FFG1156I Zynq-7000 adaptive system-on-chip heterogeneous computing ARM Cortex-A9 MPCore dual-core processor Kintex-7 FPGA FPGA logic cells CoreSight programmable logic system-on-chip semiconductor 28 nm process technology 1156-ball FCBGA FCBGA package surface mount package industrial embedded control machine vision industrial automation 800 MHz processor clock 1 V core supply DDR memory interface UG585 Zynq-7000 SoC Technical Reference Manual AMD package placement diagram
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情