XMC4502-F100F768AB - 120MHz Cortex-M4 MCU | Infineon
MPN： XMC4502-F100F768AB ✓ 啟用中XMC4502-F100F768AB 概覽
A microcontroller is a compact embedded computing component that integrates a processor core, memory, communication interfaces, timers, analog and digital peripherals, and power-management functions on one semiconductor die. The Cortex-M4 core provides a 32-bit processing architecture commonly used in industrial automation, communications, motor control, and connected equipment. The XMC4000 family combines this general-purpose core with configurable peripherals intended for real-time control applications.
The XMC4502-F100F768AB provides three headline identifiers from the verified data: a 120 MHz operating frequency, 768 kB of flash memory, and integrated Ethernet MAC capability. Its 32-bit Arm Cortex-M4 architecture supports software-controlled system operation, while the XMC4500 family is identified by Arm Keil documentation as a 120 MHz Cortex-M4 device in the XMC4000 sub-family. The package designation PG-LQFP-100-11 identifies a 100-lead LQFP package for PCB integration.
The XMC4502-F100F768AB is suited to industrial automation systems that require local control and network connectivity. The Ethernet MAC can support network-connected equipment when paired with the required external interface circuitry and stack. The 120 MHz core provides processing headroom for control loops, communication handling, and supervisory logic. The verified search results also associate the device with industrial automation and XMC-FB applications, but exact peripheral assignments, electrical limits, and pin functions require review of the official Infineon documentation.
Typical design work should begin with the package footprint, pin multiplexing, clock configuration, memory map, and Ethernet physical-layer requirements. Because this is a 100-pin LQFP MCU, PCB layout must preserve adequate clearance around fine-pitch leads and provide reliable power, ground, decoupling, and signal-integrity connections. Firmware and tool selection should be checked against the XMC4000 device family pack and the exact ordering variant before production release.
This page consolidates the verified manufacturer-family description, distributor identification, package information, tool references, and sourcing links for XMC4502-F100F768AB. It intentionally avoids filling unprovided pin, electrical, temperature, and pricing fields with assumptions; those values should be obtained from the current manufacturer datasheet or an authorized quotation.
For a complete design decision, compare the verified 120 MHz, 768 kB flash, Cortex-M4, Ethernet MAC, and PG-LQFP-100-11 characteristics against the system clock, network, memory, package, and qualification requirements. XAIPART can be contacted for availability, pricing, and datasheet support using the MPN.
直接替換替代品，適用於 XMC4502-F100F768AB — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： XMC4502-F100F768AB （相同外形與佔位） — 差異在於 Architecture, Device Family, Product Type.
XMC4502-F100F768-AC
✅ 直接替換📋 參考替代品（不在目錄中）
XMC4502F100F768ACXQMA1
✅ 直接替換📋 參考替代品（不在目錄中）
XMC4502-F100F768
✅ 直接替換📋 參考替代品（不在目錄中）
XMC4502-F100F768AB 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M4 industrial microcontroller |
| Processor Core | Arm Cortex-M4 |
| Operating Frequency | 120 MHz |
| Flash Memory | 768 kB |
| Ethernet MAC | Integrated Ethernet MAC |
| Microcontroller Family | XMC4000 series |
| Device Family | XMC4500 series |
| 封裝 | PG-LQFP-100-11 |
| Package Type | 100-lead LQFP |
| Architecture | 32-bit ARM architecture |
| 安裝類型 | Surface mount |
| Industrial Positioning | Industrial microcontroller |
| Toolchain Reference | Arm Keil XMC4000_DFP device family pack |
| Manufacturer | Infineon Technologies |
| Ethernet Function | Network connectivity function |
| Ordering Suffix | AB |
XMC4502-F100F768AB 100-lead lqfp 腳位配置指南
XMC4502-F100F768AB（100-lead lqfp 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： XMC4502-F100F768AB.
請參閱 資料表 以查看完整腳位配置。
典型應用
XMC4502-F100F768AB 適用於 6 應用s: Industrial Ethernet Control, Factory Automation, Motor Control and Automation, Industrial Sensor Gateway, Real-Time Test and Measurement, Connected Embedded Equipment.
Industrial Ethernet Control
The Infineon XMC4502-F100F768AB fits connected industrial control equipment that needs a 120 MHz Cortex-M4 core, 768 kB flash, and Ethernet MAC capability in a PG-LQFP-100-11 package. The MCU can coordinate real-time control tasks, supervisory logic, and network communication while the board supplies the required physical-layer network interface. Designers should verify the exact Ethernet pin functions, PHY or transceiver interface, clocking, and peripheral multiplexing in the official datasheet. The primary advantage is integration: one industrial microcontroller package combines processing, local control, firmware storage, and network-oriented connectivity instead of requiring a separate network controller. Firmware development should use the XMC4000 device-family support identified by Arm Keil and should account for the exact ordering suffix before release.
推薦
Factory Automation
XMC4502-F100F768AB is suitable for factory automation modules that combine deterministic control with network connectivity. Its verified 120 MHz Arm Cortex-M4 core provides processing capacity for control loops and communication tasks, while 768 kB flash supports embedded application firmware. The integrated Ethernet MAC can support connected sensors, actuators, and supervisory equipment when the board includes the required network interface circuitry. The PG-LQFP-100-11 package is appropriate for a conventional industrial controller PCB with accessible assembly and inspection requirements. Before schematic capture, confirm supply voltage, I/O limits, timer and communications resources, pin multiplexing, and operating-temperature requirements from the manufacturer documentation. Industrial qualification and long-term availability should also be confirmed for the exact production configuration.
推薦
Motor Control and Automation
The XMC4502-F100F768AB can serve as the central controller in an industrial motor-control or equipment-control subsystem because the verified XMC4000-family positioning and 120 MHz Cortex-M4 core support time-sensitive embedded processing. The MCU can execute control software, monitor inputs, coordinate outputs, and provide a network management path through its Ethernet MAC. The package provides 100 external leads for integrating the required control, communication, and sensing signals. Actual performance depends on the motor-control peripherals, PWM resources, analog interfaces, timing requirements, and thermal design, none of which are supplied in the verified data. Engineers should review the XMC4502 datasheet for peripheral assignments, electrical limits, clock conditions, and application-specific reference designs before selecting external drivers.
推薦
Industrial Sensor Gateway
XMC4502-F100F768AB is a suitable candidate for an industrial sensor gateway because it combines a 120 MHz 32-bit Cortex-M4 core, 768 kB flash, and Ethernet MAC positioning in one microcontroller package. The gateway can acquire local sensor data, apply filtering or control logic, and forward information through an Ethernet-based industrial network. The integrated MAC reduces the need for a separate network interface controller, although a PHY, isolation, magnetics, routing, and firmware network stack remain system-level requirements. The 100-lead LQFP package also gives the designer access to a broad pin count for sensor inputs and communications. Verify the exact ADC, timer, communication, and pin-mux resources in the manufacturer datasheet, and confirm whether the enclosure temperature is compatible with the device grade.
推薦
Real-Time Test and Measurement
The Infineon XMC4502-F100F768AB can support real-time measurement and control instruments that require deterministic embedded processing and optional Ethernet connectivity. Its verified 120 MHz Cortex-M4 core can coordinate acquisition sequencing, control logic, data handling, and communication, while 768 kB flash provides embedded firmware storage. The Ethernet MAC allows the instrument to exchange data with a host or industrial network when the board implements the appropriate physical interface. The PG-LQFP-100-11 package is manageable for a conventional multilayer PCB, but fine-pitch routing, decoupling, grounding, and clock integrity require careful layout. Exact ADC performance, timer resolution, I/O ratings, supply range, and temperature limits were not included in the verified data and must be verified before instrument design.
推薦
Connected Embedded Equipment
XMC4502-F100F768AB can be used as the main controller in connected embedded equipment where a 32-bit industrial MCU, 768 kB flash, and Ethernet MAC are useful together. The processor can manage local user interfaces, actuator logic, diagnostics, and network tasks while retaining a compact 100-lead LQFP footprint. The integrated Ethernet MAC makes the architecture suitable for remote configuration, status reporting, and supervisory control, provided that the board implements an approved physical-layer network design. The verified data does not specify the complete peripheral list or pin assignments, so designers should validate every required signal against the official XMC4502 documentation. Arm Keil device-family support should be checked for the selected compiler and debugger configuration before committing to production firmware.
推薦
推薦產品摘要
工程參考資料，適用於 XMC4502-F100F768AB — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XMC4502-F100F768-AC | XMC4502F100F768ACXQMA1 | XMC4502-F100F768 |
|---|---|---|---|---|
| Product Type | 32-bit ARM Cortex-M4 industrial microcontroller | 32-bit XMC4000 industrial microcontroller | 32-bit ARM Cortex-M4 microcontroller | XMC-FB industrial microcontroller family |
| Operating Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Package | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 |
| Brand | Infineon | Infineon | Infineon | Infineon |
| Industrial Positioning | Industrial XMC4000-family microcontroller | Industrial | XMC4000 industrial family | Industrial |
主要差異化特點
- Integrated industrial connectivity (對比XMC4502-F100F768-AC)
- Processing and firmware storage (對比XMC4502F100F768ACXQMA1)
- Package integration (對比XMC4502-F100F768)
設計說明
Start the layout by checking the official PG-LQFP-100-11 land pattern and pin-1 orientation. The verified data confirms the 100-lead LQFP package but does not provide a complete pin map, so do not route signals from family-level assumptions. Keep power and ground connections short, place decoupling capacitors close to the device pins, and preserve controlled return paths for Ethernet and high-speed signals.
Determine the exact supply voltage, I/O limits, and power-consumption requirements from the current Infineon datasheet before schematic approval. The supplied data does not include voltage ratings or current limits. Use the manufacturer's recommended decoupling and power-sequencing arrangements, and verify the design against the maximum clock, Ethernet transceiver, and external-interface loading rather than relying only on the 120 MHz headline specification.
Do not assume that a related XMC4502 ordering code is a drop-in replacement merely because the family description matches. The verified sources identify XMC4502-F100F768-AC and XMC4502F100F768ACXQMA1 as related parts, but they do not explicitly establish identical AB-suffix pinout, electrical behavior, or qualification. Compare the official pin table, package drawing, clock settings, peripheral assignment, and ordering information before substitution.
Use the Arm Keil XMC4000_DFP family support identified in the verified results as the starting point for firmware tooling, but confirm that the selected compiler, debugger, CMSIS pack, startup file, and device identifier support the exact XMC4502-F100F768AB ordering code. Device-family support can cover a related suffix without guaranteeing identical peripheral configuration, so perform a firmware build, pin-map review, and hardware bring-up on the production board.
合規資訊
The supplied verified data does not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements for XMC4502-F100F768AB. Obtain current compliance documentation from Infineon or the authorized distributor.
