FPGA与CPLD
产品（6666)
A3P600L-1FG484 - ProASIC3L FPGA 600K Gates | Microchip
The Microchip Technology (formerly Microsemi) A3P600L-1FG484 is a ProASIC3L low-power flash-based FPGA with 600K system gates, 235 user I/Os, and up to 892.86 MHz performance, fabricated on a 130nm flash process and housed in a 484-pin Fine-Pitch Ball Grid Array (FBGA) package. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic blocks and programmable interconnects that the designer reconfigures after manufacturing. Within the programmable logic hierarchy, the ProASIC3L sits in the flash-based FPGA class, distinguished from SRAM FPGAs by its non-volatile configuration: the design is stored on-chip, so no external configuration PROM or boot sequence is required, and the device powers up instantly and securely. Key features of the A3P600L-1FG484 include a low-power core operating from 1.2V (the L suffix denotes the low-power core voltage option), a 600K-gate flash fabric with abundant embedded block RAM, 235 available user I/Os for wide bus interfaces, and single-chip operation that reduces total cost of ownership. The 130nm process with flash cells also gives strong security against design cloning compared with bitstream-download SRAM FPGAs. Technically, the ProASIC3L architecture provides VersaTile logic elements that can be configured as combinational logic, D flip-flops, or small memories, plus dedicated embedded memory blocks and optional support for common memory and bus interfaces. The 1.2V core delivers reduced dynamic power, making the device attractive for power-sensitive designs that still need FPGA-scale logic density. Typical applications include industrial automation and motor control glue logic, communications line cards, medical instrumentation, and aerospace-adjacent low-power control systems, where non-volatile, instant-on programmable logic with moderate density is required. When designing with this part, budget power around the 1.2V core rail and verify I/O bank voltage compatibility with adjacent circuitry, and confirm that your CAD flow (Libero SoC) supports the -1 speed grade. This page adds information gain beyond the datasheet by synthesizing distributor stock signals, drop-in alternative options within the ProASIC3L FG484 family, and practical design notes.
A3P600L-1FG484I - ProASIC3L 600K Flash FPGA | Microchip
The Microchip Technology (formerly Microsemi/Actel) A3P600L-1FG484I is a low-power ProASIC3L flash-based FPGA with 600K system gates, 110592 D9 register-cells, up to 235 user I/Os, and a 1.2V core, packaged in a 484-ball Fine-Pitch Ball Grid Array (FG484) industrial-grade (-40C to +100C) variant with speed grade -1. A flash-based FPGA is a field-programmable gate array whose configuration is stored in on-chip non-volatile flash memory rather than an external configuration ROM. In the FPGA hierarchy (FPGA -> programmable logic device -> programmable semiconductor), flash FPGAs occupy the single-chip niche: they power up instantly, require no boot device, and resist configuration corruption, unlike SRAM FPGAs such as Xilinx Spartan or Altera Cyclone families. Key features of the A3P600L include Microchip's Flash*Freeze technology, which dramatically reduces static and dynamic power by allowing near-instant sleep and wake without losing state; a 1.2 V to 1.5 V core voltage range; reprogrammable flash fabric with live-on-power-up operation; and 130 nm flash process technology. The 484-ball FBGA footprint provides ample I/O for bus-wide interfaces while remaining reflow-solderable on standard SMD assembly lines. Architecturally, the ProASIC3L fabric is built from VersaTiles - fine-grained logic tiles that implement both combinational and sequential functions - supported by embedded RAM blocks, FIFO control, and flexible I/O banks supporting multiple voltage standards. Because configuration resides in flash, security against cloning and overbuild is inherently stronger than SRAM-based competitors. Typical applications include portable and battery-powered instrumentation, industrial automation controllers, aerospace sub-systems requiring instant-on logic, communications line cards, and medical monitoring equipment where Flash*Freeze idle current is decisive. Design consideration: budget the power rails per the Microchip power estimator for the -1 speed grade; the Flash*Freeze pin must be properly sequenced with the I/O banks to avoid bus contention during sleep entry and wake-up. This page synthesizes distributor pricing context, same-family drop-in options, and practical design notes not consolidated in the manufacturer datasheet.
A3P600L-1FGG144 - 600K Gate Flash FPGA | Microchip Technology
The Microchip Technology A3P600L-1FGG144 is a low-power flash-based Field Programmable Gate Array (FPGA) from the ProASIC3L family, offering 600,000 system gates, 13,824 logic cells, and 97 user I/Os in a 144-ball FBGA package. It operates with a core voltage of 1.2V to 1.5V and supports a maximum clock frequency of 350MHz, making it suitable for a wide range of low-power, high-reliability applications. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement custom digital logic functions. Unlike fixed-function ASICs, FPGAs offer reprogrammability, allowing designers to iterate quickly and adapt to changing requirements. The ProASIC3L family is part of the broader FPGA category, which sits within programmable logic devices (PLDs) and integrated circuits (ICs). These devices are essential in applications requiring flexible, high-performance digital processing. Key features of the A3P600L-1FGG144 include Flash*Freeze technology for ultra-low power consumption, nonvolatile flash configuration that is instant-on and secure, and support for 1.2V to 1.5V core voltage. The device provides 97 user I/Os, 110,592 bits of RAM, and 13824 CLBs, enabling complex logic designs. Its low power consumption and small footprint make it ideal for portable and battery-powered systems. Technically, the A3P600L-1FGG144 is built on a 130nm CMOS process, offering a balance of performance and power efficiency. The flash-based architecture eliminates the need for external configuration memory, reducing system cost and board space. The device supports multiple I/O standards and includes phase-locked loops (PLLs) for clock management, enhancing design flexibility. Typical applications include industrial control, automotive electronics, communications infrastructure, and consumer electronics. Its low power and instant-on capability are particularly beneficial in battery-operated devices, where minimizing energy consumption is critical. The 144-ball FBGA package with 1mm pitch and 13x13mm body size is suitable for space-constrained designs. When designing with this FPGA, consider the core voltage requirements and ensure proper decoupling capacitors are placed near the power pins. The Flash*Freeze mode can be used to reduce standby power, but careful attention to I/O states is needed to avoid floating inputs. Refer to the manufacturer's datasheet for detailed power-up sequencing and configuration guidelines. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P600L-1FGG144.
A3P600L-1FGG144I - ProASIC3L Flash FPGA 600K Gates | Microchip
The Microchip Technology (Microsemi) A3P600L-1FGG144I is a 600,000-gate ProASIC3L flash-based FPGA with 13,824 logic cells (CLBs), 97 user I/Os, and a low-power 1.2 V core, housed in a 144-ball FBGA (FGG144) package measuring 13 x 13 mm with 1.0 mm ball pitch. The industrial-grade suffix (I) supports operation from -40C to +100C junction temperature. A flash-based FPGA is a field-programmable gate array that stores its configuration in on-chip non-volatile flash memory rather than an external configuration device. Within the programmable logic hierarchy - FPGA -> programmable logic device -> semiconductor - flash FPGAs occupy the single-chip, instant-on niche, contrasting with SRAM FPGAs that require a boot flash and are vulnerable to configuration readback. Key features include single-chip solution with on-chip flash (no external boot device, live at power-up), low total cost of ownership (TOC), a 1.2 V to 1.5 V core voltage range supporting low-power designs, and support for Level 0/1/2 security via FlashLock, which locks the device against readback and modification. The ProASIC3L family is the low-power variant of ProASIC3, using a 1.2 V core for reduced static and dynamic power. Technically, the A3P600L uses CMOS flash switch technology with a sea-of-modules architecture of logic modules and VersaTiles, supporting clock frequencies suitable for the -1 (standard) speed grade. On-chip resources include embedded memory blocks and support for common I/O standards at 3.3 V, 2.5 V, 1.8 V, and 1.5 V banks. Typical applications include industrial control, military/aerospace and secure systems needing configuration security, bridge logic, portable and low-power instrumentation, and ASIC prototyping where instant-on, single-chip operation matters. Design consideration: budget power by estimating utilization in Libero SoC before fixing the core rail; the 1.14 V to 1.575 V supply tolerance allows margin but thermal design in the 13 x 13 mm BGA must still be verified. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet. Prices as of 2026-08-31.
A3P600L-1FGG484 - 600K Gate Flash FPGA | Microchip | FBGA-484
The Microchip (formerly Microsemi) A3P600L-1FGG484 is a low-power flash-based Field Programmable Gate Array (FPGA) from the ProASIC3L family, offering 600,000 system gates and 13,824 logic cells (CLBs) in a 484-ball FBGA package with 1.00 mm pitch. It operates from a 1.2 V core supply and supports a maximum internal clock frequency of 350 MHz (892.86 MHz according to some sources), making it suitable for mid-density logic integration with the unique advantage of Flash*Freeze technology for ultra-low static power consumption. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement arbitrary digital logic functions. Unlike ASICs, FPGAs are reprogrammable, allowing design changes without new silicon. The ProASIC3L family is a flash-based FPGA, meaning configuration is stored in non-volatile flash memory, so it retains its program at power-off and is instantly available on power-up, unlike SRAM-based FPGAs that require external boot memory. This places the A3P600L in the hierarchy: FPGA -> flash FPGA -> ProASIC3L family -> mid-density FPGA. Key features include 235 user I/O pins, 110,592 bits of RAM, and support for multiple I/O standards. The device is built on 130 nm CMOS technology, balancing performance with low power. The Flash*Freeze mode allows the FPGA to enter an ultra-low-power state while retaining register and RAM contents, drawing only 5 mA (typical) in this mode. The 484-ball FBGA package measures 23 x 23 mm with a 2.23 mm height, providing a compact footprint for space-constrained designs. Architecturally, the A3P600L uses a flash-based switch fabric that eliminates the need for configuration PROMs, reducing system cost and board space. It supports up to 350 MHz system performance and includes phase-locked loops (PLLs) for clock management. The device is reprogrammable in-system, enabling field updates. Its low-power design makes it ideal for battery-powered and thermally constrained applications. Typical applications include industrial control, automotive electronics, communications infrastructure, and consumer electronics where low power and instant-on operation are critical. The 235 I/Os allow interfacing with various peripherals, and the embedded RAM supports data buffering and FIFO implementations. When designing with this device, ensure proper decoupling of the 1.2 V core supply and follow the layout guidelines in the datasheet for the FBGA package. The Flash*Freeze pin must be handled carefully to achieve the specified low-power state. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P600L-1FGG484.
A3P600L-1FGG484I - ProASIC3L FPGA 600K | Microchip
The Microchip Technology A3P600L-1FGG484I is a ProASIC3L flash-based Field Programmable Gate Array (FPGA) with 600,000 system gates, 13,824 logic elements, 235 user I/O pins, and 110,592 bits of RAM, delivered in a 484-ball FBGA package (23 x 23 mm). This industrial-temperature device combines non-volatile flash configuration with a 1.2 V core for low-power, instant-on operation in a wide range of embedded systems. A Field Programmable Gate Array (FPGA) is an integrated circuit whose logic fabric can be configured after manufacturing to implement arbitrary digital logic. Unlike fixed-function ASICs, FPGAs allow designers to create custom state machines, DSP chains, interface bridges, and parallel processing engines. The ProASIC3L family sits in the FPGA hierarchy below large SRAM-based devices and above CPLDs, offering hundreds of I/O and hundreds of thousands of gates while retaining the simplicity of a flash-based single-chip solution. Key features of the A3P600L-1FGG484I include 600K system gates, 13,824 logic elements, 110,592 bits of RAM, 235 user I/O, and a maximum operating frequency of 350 MHz. Built in 130 nm CMOS technology with a 1.2 V core, the device supports battery-friendly low-power designs and multi-voltage I/O banks. The 484-ball FBGA package provides a compact 23 x 23 mm footprint while allowing dense board integration. From a technical depth perspective, ProASIC3L FPGAs use flash-based configuration cells that retain the programming even when power is removed. This eliminates the need for external configuration memory in many applications and provides a secure, non-volatile bitstream. The device is reprogrammable, enabling field updates and prototyping flexibility, while the 1.2 V core voltage minimizes switching power compared to earlier 1.5 V families. Typical applications include industrial automation, communications infrastructure, aerospace and defense electronics, medical imaging, edge computing, and automotive body control. The 235 user I/O can connect to ADCs, DACs, Ethernet PHYs, sensors, and motor-drive gate drivers, making the device a versatile integration point in mixed-signal systems. When designing with this FPGA, pay attention to the 1.2 V core supply decoupling and the bank-specific I/O supply voltages. Use sufficient bypass capacitance at the power balls and follow the manufacturer layout recommendations for the 484-ball FBGA to maintain signal integrity at 350 MHz. This page synthesizes distributor sourcing clues, drop-in Microchip alternatives, and practical FPGA design notes that go beyond a raw datasheet listing, helping engineers evaluate the A3P600L-1FGG484I more quickly.
A3P600L-1PQG208I - 600K Gate ProASIC3L FPGA | Microchip
The Microchip Technology A3P600L-1PQG208I is a ProASIC3L Field Programmable Gate Array (FPGA) offering 600,000 system gates and 110,592 RAM bits, housed in a 208-pin PQFP (BFQFP) package. This device features 154 configurable I/O pins and operates with a core supply voltage between 1.14V and 1.575V, making it suitable for a wide range of low-power, high-reliability applications. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence "field-programmable." FPGAs are part of the programmable logic family, which also includes CPLDs (Complex Programmable Logic Devices). They consist of an array of programmable logic blocks, interconnects, and I/O blocks, allowing designers to implement complex digital logic functions without the cost and lead time of custom ASICs. FPGAs are widely used in prototyping, aerospace, defense, industrial control, and communications where flexibility and reconfigurability are critical. Key features of the A3P600L-1PQG208I include its low power consumption due to the 1.2V core voltage, flash-based configuration that is instantly available on power-up, and high security with no bitstream to intercept. The device supports up to 154 user I/Os, providing ample connectivity for various interfaces. The ProASIC3L family is known for its low total cost of ownership (TCO), single-chip solution, and small footprint packages, making it an attractive choice for cost-sensitive designs. Technically, the A3P600L is fabricated using a 130nm flash process, offering a system performance of up to 350 MHz (as per Jotrin) or 781.25 MHz (per FindIC) depending on the speed grade. The -1 speed grade indicates a standard performance level. The device includes 13824 configurable logic blocks (CLBs) and supports various I/O standards, including LVCMOS, LVTTL, and differential standards. The flash-based architecture provides non-volatile configuration, eliminating the need for external configuration memory and reducing system complexity. Typical applications for the A3P600L-1PQG208I include aerospace and defense systems, industrial automation, communications infrastructure, and medical electronics. Its low power and high reliability make it ideal for remote or battery-powered applications where power efficiency is paramount. The 208-pin PQFP package is suitable for board-level integration without the need for expensive BGA assembly processes. When designing with this device, consider the core voltage requirements (1.14V to 1.575V) and ensure proper decoupling with 0.1uF and 10uF capacitors. The device is obsolete per Ventronchip, so verify availability and consider alternative sources or last-time buy options. For new designs, evaluate the A3P1000L series for higher density or the A3P250 for lower cost. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a comprehensive resource for engineers evaluating the A3P600L-1PQG208I.
A3P600L-FG144 - ProASIC3L 600k-Gate Low-Power FPGA | Microchip
The Microchip (Microsemi) A3P600L-FG144 is a ProASIC3L low-power flash FPGA with 600,000 system gates, 13,824 logic cells, 97 user I/Os, and a 1.2 V to 1.5 V core, housed in a 144-ball FBGA (FG144) package measuring 13 x 13 mm with a 1.0 mm ball pitch. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of programmable logic blocks and interconnects that designers configure to implement custom digital circuits. Within the programmable logic hierarchy, the ProASIC3L belongs to the nonvolatile flash FPGA family: unlike SRAM FPGAs, it stores its configuration in on-chip flash, needs no external boot PROM, and reaches instant-on operation at power-up. Key features include single-chip, single-voltage operation, Flash*Freeze technology that cuts static power to microwatt levels without losing register or SRAM state, and live reprogrammability. The flash fabric also delivers intrinsic security because configuration data cannot be read back, protecting designs against cloning and overbuilding. Technically, the A3P600L is built on a CMOS flash process and integrates 110,592 bits of dedicated embedded flash memory alongside the configuration cells, plus embedded SRAM blocks. Logic cells support single-bit registers, look-up-table logic, and carry chains suitable for state machines and datapaths clocked up to roughly 250 MHz depending on design complexity. Typical applications include portable and battery-powered instrumentation, industrial control, aerospace subsystems requiring instant-on and configuration security, and glue-logic consolidation replacing multiple ASSPs and CPLDs. Design consideration: the -F (commercial 0 to 85 C) speed/temp grade means designers needing industrial temperature should evaluate the FGG/I variants. Core voltage must be selected between 1.2 V (lowest power) and 1.5 V (highest performance) at board design time. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
A3P600L-FG144I - 600K Gate ProASIC3L FPGA | Microchip Technology
The Microchip Technology A3P600L-FG144I is a low-power flash-based Field Programmable Gate Array (FPGA) from the ProASIC3L family, offering 600K system gates, 13,824 logic elements, and 97 user I/Os in a 144-ball LBGA (13x13 mm, 1.45 mm height, 1 mm pitch) package. It operates from a 1.2 V to 1.5 V core supply and supports a maximum internal frequency of 350 MHz, making it suitable for a wide range of low-power, high-reliability applications. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement custom digital logic functions. Unlike ASICs, FPGAs are reprogrammable, allowing design changes without the cost and time of a new chip fabrication run. The ProASIC3L family uses nonvolatile flash technology, which provides instant-on operation, low power consumption, and enhanced security compared to SRAM-based FPGAs. This places the A3P600L-FG144I within the hierarchy: FPGA -> programmable logic device -> integrated circuit -> semiconductor. Key features of the A3P600L-FG144I include 600K system gates, 13,824 logic elements (equivalent to 7K LEs per Mouser), 97 user I/Os, and 110,592 bits of RAM. The device supports multiple I/O standards, including LVCMOS, LVTTL, and PCI, and offers up to 350 MHz performance. Its low-power flash architecture consumes significantly less static power than SRAM-based FPGAs, making it ideal for battery-powered and thermally constrained designs. The industrial temperature grade (-40°C to +100°C) ensures reliable operation in harsh environments. Technically, the A3P600L-FG144I is built on a 130 nm flash process, which enables a single-chip, secure, and instant-on solution. The flash-based configuration memory is nonvolatile, meaning the device retains its programming even without power, eliminating the need for external configuration memory and reducing system cost and complexity. The device also supports in-system programming (ISP) and partial reconfiguration, providing flexibility for field updates and design iterations. Typical applications for the A3P600L-FG144I include industrial control systems, automotive electronics, communications infrastructure, and medical devices. Its low power consumption and instant-on capability make it particularly well-suited for portable and battery-operated equipment, while its security features protect intellectual property from unauthorized copying. The 97 I/Os allow interfacing with a variety of peripherals and memory devices. When designing with this FPGA, consider the core voltage requirement of 1.2 V to 1.5 V and ensure adequate decoupling capacitors are placed near the power pins. The device supports multiple I/O banks, each with its own supply voltage, allowing flexible voltage level translation. Proper PCB layout, including controlled impedance traces for high-speed signals, is essential to achieve the rated 350 MHz performance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for selecting and implementing the A3P600L-FG144I in their designs.
A3P600L-FG256I - 600K Gate Flash FPGA, 177 I/O | Microchip
The Microchip (Microsemi) A3P600L-FG256I is a 600,000-gate ProASIC3L flash-based FPGA with 177 user I/O pins, 110,592 bits of embedded RAM, and a 256-ball Fine-Pitch Ball Grid Array (FBGA/LBGA) package in industrial temperature grade. It operates from a 1.2 V core voltage and is fabricated on a 130 nm flash process. A flash FPGA is a field-programmable gate array whose configuration is stored in on-chip nonvolatile flash memory rather than an external configuration PROM. Within the programmable logic hierarchy (FPGA -> programmable logic device -> semiconductor), flash FPGAs occupy the single-chip, instant-on niche: they power up with configuration already loaded, need no boot device, and resist cloning better than SRAM FPGAs. Key features of the A3P600L include single-chip operation with onboard flash configuration, 1.2 V to 1.5 V core voltage support (the L suffix denotes the low-power 1.2 V core variant), reprogrammability for in-field updates, Flash*Freeze-style low static power in the ProASIC3L family, and small-footprint packaging that reduces total cost of ownership versus ASIC alternatives. Technically, the device is built from VersaTiles, a fine-grained logic architecture, with embedded SRAM blocks providing the 110,592 memory bits for FIFOs and dual-port buffering. The 130 nm flash process delivers system performance up to the several-hundred-MHz class cited by distributors for the family while keeping static power low. Typical applications include industrial automation control, military and aerospace subsystems requiring secure instant-on logic, communications line-card glue logic, and medical instrumentation, where single-chip configuration and long-lifecycle supply matter. Design consideration: budget the 1.2 V core rail carefully; the L variant trades top speed for lower dynamic power versus the standard 1.5 V A3P600, so verify timing closure at your speed grade. This page synthesizes distributor inventory data, family drop-in options, and practical design notes not found in a single manufacturer datasheet.
A3P600L-FG484 - ProASIC3L Low Power FPGA 600K Gates | Microchip
The Microchip (Microsemi) A3P600L-FG484 is a ProASIC3L low-power flash-based FPGA with 600,000 system gates, 13,824 logic cells (CLBs), and 235 user I/Os, housed in a 484-ball Fine-Pitch Ball Grid Array (FBGA-484, 23 x 23 mm, 1.0 mm ball pitch). A field-programmable gate array (FPGA) is a semiconductor device containing a matrix of configurable logic blocks (CLBs) interconnected by programmable interconnects. Unlike SRAM-based FPGAs, the ProASIC3L family uses non-volatile flash technology, meaning the configuration is stored on-chip and no external boot flash or configuration controller is required - simplifying the bill of materials and improving system boot security. FPGAs sit at the top of the programmable logic hierarchy, above CPLDs, and are used to implement digital logic, glue logic, interfaces, and accelerators. Key features of the A3P600L include 110,592 bits of embedded flash RAM, a core supply range of 1.14 V to 1.575 V (1.2 V nominal), support for up to 350 MHz internal performance per the device family datasheet, and Microsemi Flash*Freeze technology that allows near-zero-power standby without losing state. The L-suffix denotes the low-power 1.2 V core variant of the ProASIC3 family, reducing static power significantly compared with the standard A3P600. Architecturally, the device integrates VersTiles (fine-grained logic tiles), embedded block RAM, and I/O banks supporting multiple single-ended and differential standards. The flash-based fabric also provides inherent security advantages because the bitstream is not exposed at power-up, unlike SRAM FPGAs that download configuration from external memory. Typical applications include portable and battery-powered instrumentation, industrial control, aerospace and defense subsystems, secure embedded controllers, and low-power bridging logic where single-chip, non-volatile configuration is valuable. Design consideration: the verified distributor data lists RoHS status as non-compliant for this exact ordering code, so confirm environmental requirements and consider the lead-free FGG484 sibling where regulations demand it. This page adds value beyond the datasheet by synthesizing distributor pricing tiers, drop-in family alternatives, package compatibility notes, and practical design guidance in one place.
A3P600L-FG484I - ProASIC3L Flash FPGA 600K Gates | Microchip
The Microchip Technology (formerly Microsemi) A3P600L-FG484I is a low-power ProASIC3L flash-based FPGA with 600,000 system gates, 13,824 logic cells, 235 user I/O, and a 484-ball FBGA package (23 x 23 mm, 1.0 mm ball pitch) rated for the industrial temperature range. A flash FPGA is a field-programmable gate array that stores its configuration in on-chip nonvolatile flash memory rather than an external configuration ROM. Because the fabric is inherently nonvolatile and single-chip, ProASIC3L devices are Instant On at power-up, resist configuration readback attacks, and require no boot PROM - a significant advantage over SRAM FPGAs in the voltage regulator / programmable logic hierarchy for cost-sensitive, secure, and space-constrained systems. Key features include a 1.2 V to 1.5 V core voltage (the L variant targets lowest static and dynamic power), reprogrammable flash fabric, and support for soft ARM cores on the ProASIC3 platform. The device also provides embedded block SRAM, abundant user I/O with flexible standards, and dramatic dynamic and static power savings versus earlier generations as documented in the manufacturer datasheet. Technically, the A3P600L is fabricated on a 130 nm flash process. The VersaTile-based architecture allows each tile to act as logic, combinational cell, or embedded memory, giving high utilization without routing penalties. The industrial-grade I suffix supports extended temperature operation typical of factory and communications environments. Typical applications include industrial automation controllers, communications line cards, portable and battery-powered instrumentation, and secure single-chip glueless system logic where instant-on behavior is mandatory. Design consideration: budget the 1.2 V core rail carefully - the L-series trades peak fabric speed for static power reduction, so timing-critical paths should be verified with Microchip Libero timing analysis. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.
A3P600L-FGG144 - ProASIC3L Flash FPGA 600K, 97 I/O | Microchip
The Microchip Technology (formerly Microsemi/Actel) A3P600L-FGG144 is a 600,000-gate ProASIC3L flash-based FPGA with 97 user I/Os, 110592 bits of embedded flash memory, and a 1.14 V to 1.575 V core supply, housed in a 144-ball LBGA (FGG144) package. It belongs to the low-power L-grade family with core voltage programmable from 1.2 V to 1.5 V for active power optimization. A flash-based FPGA is a field-programmable gate array whose configuration is stored in on-chip nonvolatile flash cells rather than SRAM. Within the programmable logic hierarchy - FPGA -> flash FPGA -> single-chip programmable SoC building block - flash devices such as the ProASIC3L family are live at power-up (LAPU), require no external configuration ROM, and are inherently more secure than SRAM FPGAs because the bitstream is not intercepted at boot. Key features include nonvolatile FlashFreeze-style low static power, reprogrammability with abundant advanced features, a single-chip solution with no boot PROM, small-footprint 144-ball packaging, and low total cost of ownership. The 1.2 V to 1.5 V core voltage option lets designers trade performance against dynamic power, making the L-grade suited to battery-powered and thermally constrained systems. Architecturally, the ProASIC3L fabric is built from VersaTiles - fine-grained logic modules implemented in flash switches - delivering performance beyond the ProASICPLUS generation while retaining the security and instant-on behavior of Actel flash technology. The fabric supports embedded RAM blocks totaling 110592 bits and clocking resources suitable for moderate-speed glue logic, control, and interface bridging at 0C to +85C junction operation. Typical applications include industrial control and automation, portable and battery-operated instrumentation, secure single-chip boot logic, communications line-card bridging, and aerospace/defense designs where configuration volatility is unacceptable. Design consideration: verify I/O bank voltage compatibility against your level-shifting plan before layout, since the 97 available user I/Os are grouped into banks that constrain mixed-voltage designs. This page synthesizes verified distributor data, drop-in same-footprint alternatives, and practical design guidance not found in the manufacturer datasheet.
A3P600L-FGG144I - ProASIC3L Flash FPGA 97 I/O | Microchip
The Microchip Technology A3P600L-FGG144I is a ProASIC3L family flash-based field programmable gate array (FPGA) offering 600,000 system gates, 97 user I/Os, and 110,592 bits of embedded RAM in a 144-ball Fine-Pitch Ball Grid Array (FGG144 / 144-LBGA, 13 x 13 mm footprint) supplied in an industrial temperature variant rated for -40C to +100C junction temperature. An FPGA (Field Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic blocks, routing resources, and programmable interconnects that designers configure after manufacturing. FPGAs sit within the broader programmable logic hierarchy alongside CPLDs and ASICs, and the ProASIC3L is a one-time-programmable, flash-based FPGA - meaning configuration data is stored on-chip in non-volatile flash cells, so no external configuration PROM or boot sequence is required. Key features include a core supply range of 1.14 V to 1.575 V supporting both 1.2 V and 1.5 V core operation, non-volatile flash programming for single-chip, instant-on operation, and industrial-grade temperature qualification. The 'L' suffix denotes the low-power ProASIC3L variant, which targets reduced static power consumption compared with the standard ProASIC3 family. Architecturally, ProASIC3L devices use Microchip (formerly Actel/Microsemi) flash switch technology with VersTiles logic elements, embedded SRAM blocks totaling 110,592 bits, and support for common I/O standards at 3.3 V and lower. The fabric is reprogrammable in-system despite the flash storage, enabling iterative development. Typical applications include industrial control and automation, communications and networking interface bridging, medical instrumentation glue logic, and portable or power-sensitive systems that benefit from the low-power L variant and instant-on flash configuration. When designing with this device, budget I/O carefully - the FGG144 package exposes only 97 user I/Os, significantly fewer than larger FGG484/FG484 packages for the same 600 k-gate fabric. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
A3P600L-FGG484 - 600K Gate Flash FPGA 484-BGA | Microchip
The Microchip (Microsemi) A3P600L-FGG484 is a ProASIC3L low-power flash FPGA with 600,000 equivalent gates, 13,824 Configurable Logic Blocks (CLBs), and 235 user I/Os, housed in a 484-ball Fine-Pitch Ball Grid Array (FBGA-484) measuring 23 x 23 mm with 1.0 mm ball pitch and 2.23 mm maximum height. It operates from a 1.2 V core supply at up to 350 MHz system performance. A flash-based FPGA stores its configuration in on-chip non-volatile flash memory rather than the SRAM cells used by Xilinx and Intel/Altera devices. This means the A3P600L powers up instantly with no external configuration ROM, requires no boot sequencer, and is inherently immune to configuration bitstream interception - a key advantage in secure and radiation-tolerant-adjacent industrial designs. Within the power management hierarchy, the ProASIC3L family sits as the low-power variant of ProASIC3, using 130 nm CMOS flash technology with a 1.2 V to 1.5 V core voltage option. Key differentiating features include single-chip Live-for-Free operation with zero configuration time, low total cost of ownership (TOC) per Microchip, support for the ARM Cortex-M1 soft processor core, embedded Flash*Freeze technology for near-zero dynamic power standby, and abundant on-chip advanced features including PLLs and block RAM. Architecturally, each of the 13,824 logic cells contains a look-up table plus registers with rich routing fabric, and the device supports single-ended and differential I/O standards across 235 available user pins in the FBGA-484 bondout. The 130 nm flash process delivers a balance of density, static power, and cost that made ProASIC3L a mainstay in long-lifecycle embedded systems. Typical applications include industrial automation controllers, communications line cards, medical instrumentation, military/aerospace subsystems requiring instant-on or secure configuration, and test equipment glue logic where reprogrammability and long-term availability matter more than leading-edge density. When designing with this device, budget the 1.2 V core rail separately from the 2.5 V/3.3 V I/O banks and verify the Flash*Freeze pin sequencing to achieve the low static-power benefit; the 484-ball footprint requires controlled-impedance PCB stack-up and X-ray-inspectable BGA assembly. This page synthesizes distributor pricing context, drop-in alternatives from the same FGG484 footprint family, and practical design notes not found in the manufacturer datasheet. Pricing shown is as of 2026-08-31 and reflects quoted/order-on-request availability typical for this mature flash FPGA family.
A3P600L-FGG484I - 600K Gate ProASIC3L FPGA | Microchip
The Microchip Technology (formerly Microsemi) A3P600L-FGG484I is a 600K-gate low-power flash FPGA from the ProASIC3L family, featuring 13,824 logic elements, up to 235 user I/Os, and 350 MHz maximum system performance, housed in a 484-ball FBGA package (23 x 23 mm, 1 mm pitch). What is an FPGA? A field-programmable gate array is an integrated circuit whose logic fabric can be reconfigured after manufacturing to implement custom digital functions. ProASIC3L uses non-volatile flash programming, so it is instantly live at power-up, unlike SRAM FPGAs that require an external configuration memory. In the product hierarchy, the A3P600L is a low-power flash FPGA, which sits within the ProASIC3L family, then the FPGA category, then programmable logic devices, and finally semiconductors. Key features include a 1.2 V to 1.5 V core supply range, advanced 130 nm CMOS technology, 600,000 system gates, 13,824 D-flip-flops, 235 user I/Os, and Flash*Freeze low-power mode that reduces standby current significantly. The 484-ball FBGA package with 1 mm pitch and 2.23 mm height supports dense board integration in industrial, aerospace, communication, and medical systems. Technically, the flash-based architecture eliminates configuration PROMs, reduces board space and BOM cost, provides design security against cloning, and supports ARM Cortex-M1 soft processors on M1 variants. It offers secure in-system programming, instant-on operation, and low static power, which are important for battery-powered and high-reliability applications. Typical applications include industrial automation and motor control, aerospace and defense avionics, communication infrastructure, medical device signal processing, and IoT edge gateways, where instant-on behavior, low static power, and high reliability are essential. When designing with this device, use a 1.2 V or 1.5 V core supply with proper decoupling capacitors, assign I/O bank voltages according to the interface standard, and follow BGA layout guidelines for routing and thermal relief. For low-power systems, enable Flash*Freeze mode during idle periods. This page synthesizes distributor availability, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers an information-gain resource for faster design and sourcing decisions.
A3PE1500-1FG484 - ProASIC3E Flash FPGA 16KLE 484-BGA | Microchip
The Microchip Technology (formerly Microsemi/Actel) A3PE1500-1FG484 is a ProASIC3E flash-based FPGA with approximately 16,000 logic elements (1.5 million system gates), 280 user I/Os, and 276,480 bits of embedded true dual-port SRAM, housed in a 484-ball Fine-Pitch Ball Grid Array (FBGA-484) package with 1 mm ball pitch. A flash-based FPGA is a field-programmable gate array whose configuration is stored in on-chip nonvolatile flash memory rather than an external configuration PROM. This places the ProASIC3E family in the broader hierarchy: FPGA -> programmable logic device -> digital integrated circuit -> semiconductor. Unlike SRAM FPGAs, a flash FPGA is a single-chip solution that boots instantly at power-up, requires no external boot device, and offers inherently higher design security. Key features include a 130-nm, 7-layer-metal (6 copper) flash-based CMOS process, up to 504 kbits of true dual-port SRAM, optional soft ARM support, and low total cost of ownership through single-chip integration. The -1 speed grade supports commercial 0C to +70C operating temperature, and the 1.5V core enables low dynamic power. The FG484 package is footprint-compatible with the FG256 variant, simplifying family migration. Technically, the ProASIC3E fabric uses VersTile logic elements and dedicated block RAM organized in minibanks with per-bank VREF support for voltage-referenced I/O standards. Abundant user I/O (280 on the FG484) supports multiple single-ended and differential standards for system interfacing. Typical applications include ASIC replacement and prototyping, industrial control, networking and communications equipment, avionics and defense systems, and consumer designs requiring instant-on operation. Design consideration: flash FPGAs dissipate static power continuously; estimate power with the Microchip Libero SoC power calculator before committing to the 1.5V core supply topology. Verify I/O bank voltage assignments early to avoid PCB respins. This page synthesizes distributor pricing, same-family drop-in alternatives, design notes, and FAQ content not consolidated in the manufacturer datasheet.
A3PE1500-1FG676I - ProASIC3E FPGA 1.5M Gates | Microchip
The Microchip Technology A3PE1500-1FG676I is a ProASIC3E flash-based Field Programmable Gate Array (FPGA) offering 1.5 million system gates, 276,480 bits of true dual-port SRAM, and 444 user I/Os, delivered in a 676-ball FBGA package with 1 mm pitch. This -1 speed grade supports typical 272MHz system performance and operates from a 1.5V core supply, making it a mid-capacity FPGA for logic-intensive, low-power applications. What is an FPGA? A Field Programmable Gate Array is an integrated circuit that can be configured by the designer after manufacturing to implement arbitrary digital logic. Unlike fixed-function ASICs, FPGAs contain programmable logic blocks, configurable I/O, and routing resources; they are used for rapid prototyping, custom digital control, signal processing, and protocol bridging. The ProASIC3E family is built on a 130nm flash-based CMOS process, which means configuration is stored in non-volatile flash cells rather than external SRAM/EEPROM. Key features include 1.5M system gates, 38,400 logic elements, 444 user I/Os, 276,480 bits of true dual-port SRAM, and up to 272MHz system performance. The flash fabric is live-at-power-up, eliminating the boot time and external configuration memory of SRAM FPGAs. In-system programming (ISP) is supported through JTAG, and the single-chip design reduces board area and bill-of-materials cost. Technical depth: The device is manufactured in 130nm, seven-layer metal (six copper) flash-based CMOS. The non-volatile architecture provides instant-on operation and inherent design security because configuration bitstreams are not exposed on external memory buses. The FPGA supports a wide range of I/O standards through configurable I/O banks—though the exact I/O voltage list should be confirmed in the ProASIC3E datasheet—and includes dedicated clock conditioning circuitry. Typical applications include communications infrastructure, industrial automation, medical electronics, aerospace and defense systems, automotive connectivity, and IoT edge processing. The 444 I/Os allow parallel bus interfaces, while the 1.5M gates are sufficient for soft-core processors, DSP datapaths, and protocol controllers. Design consideration: The 1.5V core supply must be clean and adequately decoupled. Use a 0.1uF ceramic capacitor on each VCC/BGx pin and a 10uF bulk capacitor near the FPGA, with a solid ground plane; verify power sequencing if multiple I/O supplies are used. The FBGA-676 package has a 27 mm x 27 mm body with 1 mm ball pitch, requiring careful PCB fanout. This page synthesizes distributor availability, pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a pre-engineering advantage for the A3PE1500-1FG676I.
A3PE1500-1FGG484 - ProASIC3E Flash FPGA 1.5M Gates | Microchip
The Microchip Technology A3PE1500-1FGG484 (formerly Actel) is a ProASIC3E flash-based FPGA with 1.5 million system gates, 280 user I/Os, and a 484-ball Fine-Pitch Ball Grid Array (FBGA-484, 1.00 mm ball pitch) package. It is fabricated on a 130-nm, 7-layer-metal flash-based CMOS process and operates from a 1.5V core supply. A flash-based FPGA is a field-programmable gate array whose configuration is stored in on-chip flash memory cells rather than volatile SRAM. This places the ProASIC3E family in the broader hierarchy of programmable logic devices: FPGA -> programmable logic -> digital IC -> semiconductor. Unlike SRAM FPGAs, flash-based devices are live-at-power-up, single-chip solutions that require no external configuration PROM, reducing bill-of-materials cost and board area while improving configuration security and power-up immunity. Key features include reprogrammable flash fabric, up to 504 kbits of true dual-port SRAM block memory, low total cost of ownership (TOC), and single-chip operation without boot devices. The fabric supports system-level performance suitable for glue logic consolidation, bus bridging, and control-plane functions. Technically, the device uses Microchip's Versatile routing fabric with flash switches that retain configuration through power cycles. The Sea-of-Versatile-Element architecture provides fine-grained logic granularity, and embedded block SRAM supports FIFOs and dual-port buffering for data-path designs. Typical applications include industrial automation control, communications and networking line-card support logic, medical instrumentation, and aerospace/defense systems where configuration volatility is undesirable. The 280 available I/Os in this package support wide parallel bus interfaces. Design consideration: the commercial temperature grade (0C to +70C) of the non-I suffix means industrial designs should select the A3PE1500-1FGG484I variant instead; also plan I/O bank voltages carefully since ProASIC3E supports mixed-voltage I/O. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
A3PE1500-1FGG484I - ProASIC3E FPGA 1.5M Gates | Microchip
The Microchip Technology A3PE1500-1FGG484I is a ProASIC3E flash-based field-programmable gate array (FPGA) offering 1.5 million system gates, 16K logic elements, 280 user I/Os, and 276480 bits of true dual-port SRAM, housed in a 484-ball FBGA package with 1 mm pitch. This -1 speed grade device supports 272 MHz system performance at a 1.5 V core supply and is specified for industrial temperature operation per the 'I' suffix. An FPGA is a programmable logic integrated circuit that can be configured after manufacture to implement arbitrary digital logic. Unlike CPLDs, which are typically smaller and limited to combinational logic, FPGAs contain thousands of configurable logic blocks, embedded memory, and programmable I/O, allowing complex synchronous digital systems to be built without a custom ASIC. The ProASIC3E family sits in the FPGA product hierarchy as a non-volatile, flash-based FPGA, occupying a position between low-density CPLDs and high-density SRAM-based FPGAs. It is reprogrammable in the field yet retains its configuration when power is removed. Key features include non-volatile flash configuration, which eliminates the need for external boot memory and provides live-at-power-up operation. The 1.5M system-gate density supplies adequate resources for soft processors, communication controllers, and video processing pipelines. The 280 user I/Os, arranged in multiple I/O banks, support a range of single-ended and differential signaling standards. The 276480 bits of SRAM provide true dual-port memory blocks for FIFOs and packet buffers. The -1 speed grade and 272 MHz performance give a strong balance of speed and power. Technically, the device is fabricated on a 130 nm, seven-layer-metal (six copper) flash-based CMOS process. ProASIC3E FPGAs differ from SRAM-based FPGAs in that their configuration is stored in non-volatile flash cells, providing immunity to single-event upsets in configuration memory and simplifying secure IP retention. The flash fabric supports partial reconfiguration and on-chip programming through JTAG. The FPGA includes clock conditioning circuits (CCC) and phase-locked loops (PLLs) for robust clock generation; exact PLL count and I/O standard support should be confirmed from the datasheet Appendix. Typical applications include wired and wireless communications line cards, industrial automation controllers, avionics data concentrators, medical imaging front-end processing, and ASIC replacement in mid-volume systems. In these roles, the A3PE1500-1FGG484I supplies deterministic, low-power logic with instant-on capability, reducing bill-of-materials cost and start-up complexity compared to SRAM FPGAs with external configuration devices. A key design consideration is power integrity: the 1.5V core rail must be decoupled with a matrix of 100 nF and 10 uF ceramic capacitors placed near the FBGA balls, and the PCB should provide an unbroken ground plane beneath the package. Because the device is flash-based, configuration memory is non-volatile, but you still need to plan for JTAG programming header access during manufacturing and field updates. This page synthesizes verified distributor data, drop-in alternative MPNs, and practical design guidance not found in the manufacturer datasheet, helping engineers evaluate A3PE1500-1FGG484I for new designs or replacement.
A3PE1500-1FGG48C - ProASIC3E Flash FPGA 484-BGA | Microchip
The Actel (now Microchip Technology) A3PE1500-1FGG48C is a ProASIC3E flash-family field programmable gate array (FPGA) delivering 1,000,000 system gates with 280 user I/Os in a 484-ball Fine-Pitch Ball Grid Array (FBGA, FGG484) package, speed grade 1, commercial temperature grade. A flash-based FPGA is a reprogrammable logic device whose configuration is stored in on-chip nonvolatile flash memory cells rather than volatile SRAM. Because the configuration data is retained when power is removed, flash FPGAs are Instant On single-chip solutions that require no external boot flash, occupy a smaller board footprint, and offer inherently higher security against design theft than SRAM FPGAs. Within the programmable logic hierarchy, the ProASIC3E family sits above the ProASICPLUS generation and serves as a cost-effective ASIC replacement in the broader power-management and system-logic semiconductor taxonomy. Key features include nonvolatile flash programming, 276,480 bits of embedded configuration capacity, support for optional soft ARM processor cores, and abundant user I/O with bank-selectable voltage-referenced standards. The -1 speed grade provides balanced logic performance for high-volume systems, while the reprogrammable flash fabric lowers total cost of ownership by eliminating external configuration devices. Architecturally, ProASIC3E uses third-generation flash switch technology with a uniform sea-of-vanilla-gates fabric, built around Versatile logic elements, embedded SRAM blocks, and advanced I/O structures supporting single-ended and differential standards. The nonvolatile nature enables secure, low-power single-chip designs with time-to-market benefits at ASIC-level unit cost. Typical applications include consumer electronics, networking and communications equipment, computing platforms, industrial control, and avionics subsystems that benefit from secure, instant-on programmable logic without external configuration memory. Design consideration: because FGG484 and FG256 packages are footprint-compatible within the family, boards can be designed to migrate between densities without re-layout; always assign one VREF pin per minibank when using voltage-referenced I/O standards. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
A3PE1500-1FGG676I - ProASIC3E FPGA, 1.5M Gates | Microchip
The Microchip Technology A3PE1500-1FGG676I is a flash-based Field Programmable Gate Array (FPGA) from the ProASIC3E family, offering 1,500,000 equivalent system gates, 38400 logic elements, and 276480 bits of RAM. It operates at a system performance of up to 231 MHz and is housed in a 676-pin FBGA package with 444 user I/Os. This device is designed for high-performance, low-power applications requiring reprogrammability and a single-chip solution. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence 'field-programmable'. FPGAs are part of the programmable logic device family, which sits between ASICs (Application-Specific Integrated Circuits) and general-purpose processors in the digital logic hierarchy. They offer the flexibility of software with the performance of hardware, making them ideal for prototyping, low-volume production, and applications requiring in-field updates. The ProASIC3E family is specifically a flash-based FPGA, meaning configuration is stored in non-volatile flash memory, allowing instant-on operation without an external boot device. Key features of the A3PE1500-1FGG676I include 1.5 million system gates, 38400 logic elements, 276480 bits of RAM, and 444 user I/Os. It operates from a 1.5V core supply and supports I/O standards including LVCMOS, LVTTL, PCI, and LVDS. The device is lead-free and RoHS compliant, with an industrial temperature range of -40°C to +85°C. The flash-based architecture provides inherent security against reverse engineering and supports in-system programming (ISP) for easy updates. Technically, the A3PE1500-1FGG676I is fabricated on a 130nm, 7-layer metal flash CMOS process, which balances performance and power consumption. The '1' speed grade guarantees operation up to 231 MHz, while the 'FGG676I' suffix indicates the 676-pin FBGA package with industrial temperature rating. The device includes up to 16 global clock networks, PLLs, and dedicated memory blocks, enabling complex digital designs. Its non-volatile configuration means it powers up instantly and is immune to configuration bitstream corruption, a common concern in SRAM-based FPGAs. Typical applications include communications infrastructure, industrial automation, avionics, and consumer electronics. In networking, it can implement protocol bridging and packet processing; in industrial settings, it handles motor control and sensor interfacing; in avionics, its flash-based security and reliability are critical. The 444 I/Os allow extensive peripheral connectivity, and the 1.5V core reduces power dissipation compared to older 3.3V FPGAs. When designing with this device, ensure adequate decoupling on the 1.5V core supply and follow Microchip's layout guidelines for the FBGA package. The flash-based architecture eliminates the need for an external configuration PROM, simplifying the BOM and reducing board space. However, the 676-pin FBGA requires careful PCB design for routing and thermal management. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3PE1500-1FGG676I.
A3PE1500-1PQG208 - 1.5M Gate Flash FPGA, 208-PQFP | Microchip
The Microchip Technology (formerly Microsemi/Microsemi Corporation) A3PE1500-1PQG208 is a flash-based ProASIC3E Field Programmable Gate Array (FPGA) with 38,400 logic cells (1.5 million system gates), 147 user I/Os, and 276,480 bits of embedded true dual-port SRAM, housed in a 208-pin fine-pitch PQFP (208-BFQFP, 1 mm pitch) package with -1 speed grade. A flash-based FPGA stores its configuration in on-chip non-volatile flash memory cells rather than an external configuration ROM. This places the ProASIC3E family in the broader hierarchy of programmable logic devices (PLDs), sitting above CPLDs in density and below high-end SRAM FPGAs in raw I/O bandwidth, within the general category of programmable semiconductors. Because configuration is flash-based, the device is live-at-power-up and provides a single-chip solution without a boot PROM. Key features include the VersaTile architecture, in which each tile functions as a three-input LUT, a D-flip-flop, or a latch with enable, enabling efficient fabric utilization. The device is fabricated on a 130-nm, 7-layer-metal (6 copper) flash-based CMOS process with a 1.5V core supply. Embedded SRAM totals up to 504 kbits organized as true dual-port blocks, and optional soft ARM Cortex-M1 support allows single-chip processor-plus-logic integration. Technical strengths include support for 3.3V PCI and 66 MHz PCI-X interfaces per the ProASIC3E datasheet, secure non-volatile configuration immune to readback attacks, and low total cost of ownership from single-chip operation. The -1 speed grade targets cost-optimized designs with typical system clock rates in the 100-272 MHz class depending on routing. Typical applications include industrial control and motor interface logic, communications line-card glue logic, secure single-chip control systems, and aerospace/defense designs requiring instant-on operation and configuration security. A key design consideration is power delivery: a 1.5V core rail and 3.3V I/O rails must be sequenced and decoupled per the datasheet power guidelines, and flash programming requires Microchip Libero SoC toolchain compatibility. This page adds information gain beyond the manufacturer datasheet by synthesizing distributor cross-references, drop-in same-package alternatives, pricing context, and practical design notes in one place.
A3PE1500-1PQG208I - ProASIC3E FPGA 1.5M Gates | Microchip
The Microchip Technology A3PE1500-1PQG208I is a ProASIC3E flash-based Field Programmable Gate Array (FPGA) with 1.5 million system gates, 147 user I/Os, and 276,480 bits of true dual-port SRAM, housed in a 208-pin PQFP (FQFP) package. It operates from a 1.5V core supply (1.425V to 1.575V) and supports system performance up to 231 MHz (typical) in the -1 speed grade. This industrial-temperature (-40°C to 100°C junction) device is part of Microchip's low-cost, single-chip, reprogrammable FPGA family. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement arbitrary digital logic functions. FPGAs belong to the programmable logic device (PLD) hierarchy, which sits above CPLDs and below ASICs in flexibility and cost. The ProASIC3E family uses a flash-based configuration cell, making it non-volatile, instant-on (Level 0 support), and single-chip—no external boot memory is required. This distinguishes it from SRAM-based FPGAs that need configuration from an external flash or EEPROM at power-up. Key features include 1.5M system gates, 38,400 VersaTiles (each configurable as a 3-input LUT or D-flip-flop/latch with enable), 276,480 bits of true dual-port SRAM, and 147 user I/Os. The flash-based 130-nm, 7-layer metal (6 copper) CMOS process provides instant-on capability, design security, and low power consumption. The device supports multiple I/O standards, including LVCMOS, LVTTL, PCI, and LVDS, with programmable slew rate and drive strength. It also includes on-chip PLLs for clock management and a JTAG interface for programming and boundary-scan testing. Architecturally, the ProASIC3E core tile (VersaTile) can be used as either a three-input lookup table (LUT) equivalent or as a D-flip-flop/latch with enable, allowing efficient use of the FPGA fabric. The flash-based configuration is reprogrammable, supporting in-system programming (ISP) via JTAG. The device is available in a 208-pin PQFP (FQFP) package with 0.5mm pitch, measuring 28mm x 28mm with 3.4mm height, and is lead-free (RoHS compliant). The -1 speed grade offers a maximum system performance of 231 MHz, while the industrial temperature grade ensures operation from -40°C to 100°C junction. Typical applications include industrial control, communications/networking, computing, avionics, and consumer electronics where low cost, instant-on, and security are critical. The A3PE1500-1PQG208I is well-suited for ASIC replacement, glue logic, and medium-density digital designs. Its non-volatile configuration eliminates the need for external configuration memory, reducing BOM cost and board space. When designing with this device, ensure adequate decoupling on the 1.5V core supply and 3.3V I/O supply. The flash-based architecture requires no configuration loading time, but proper power sequencing is recommended. For high-speed I/O, follow the PCB layout guidelines in the ProASIC3E datasheet to minimize signal integrity issues. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3PE1500-1PQG208I.