产品(39,000+)

H5CG48AGBDX018 - 16Gb DDR5-5600 DRAM, 1.1V | SK hynix
H5CG48AGBDX018

H5CG48AGBDX018 - 16Gb DDR5-5600 DRAM, 1.1V | SK hynix

The SK hynix H5CG48AGBDX018 is a 16Gb (2G x 8) DDR5 SDRAM DRAM chip operating at 5600 Mbps/pin data rate with a 1.1V supply, housed in an FBGA-82 package. DDR5 SDRAM (Double Data Rate 5 synchronous dynamic random access memory) is the fifth generation of DDR memory standards, succeeding DDR4 with higher transfer rates, lower operating voltage, on-die ECC, and bank-group architecture improvements. In the memory hierarchy, DRAM sits as the primary volatile working memory between CPU caches and non-volatile storage such as NAND flash, making DDR5 devices core components of power management and compute subsystems in servers, PCs, and embedded modules. Key features of the H5CG48AGBDX018 include its 16Gb density per die in a x8 organization, a 5600 Mbps data rate (DDR5-5600 speed grade, corresponding to a 2800 MHz clock), and a reduced 1.1V core supply compared with 1.2V for DDR4. DDR5 architecture splits each rank into two independent channels, improving effective bandwidth and channel efficiency. On-die ECC improves data reliability without host-side overhead, and the FBGA-82 fine-pitch ball grid array package supports high-density module assembly. Technically, the device operates from a 1.1V VDD supply with a separate supply domain, uses bank-group structure for faster random access, and implements DDR5 timing parameters such as tCK, tRAS, and tRP per the SK hynix DDR5 datasheet. Termination and power management are handled in-system by PMICs on registered DIMMs (RDIMM) or by host power rails on soldered-down designs. Typical applications include client and server computing modules, industrial controllers requiring high-bandwidth memory, networking equipment, and replacement sourcing for DDR5-based systems. Design consideration: DDR5 devices require careful trace-length matching, on-die termination calibration (ZQ calibration), and verification of platform memory-controller support for the DDR5-5600 speed grade; substituting parts may require BIOS or firmware timing adjustments. This page synthesizes distributor pricing, stock data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $63.98 联系我们
H5CG48AGBDX018N - DDR5 16Gb 5600Mbps DRAM | SK hynix
H5CG48AGBDX018N

H5CG48AGBDX018N - DDR5 16Gb 5600Mbps DRAM | SK hynix

The SK hynix H5CG48AGBDX018N is a 16Gb DDR5 SDRAM memory IC organized as 2Gx8, operating at data rates up to 5600 Mbps from a 1.1V supply, housed in an 82-ball FCBGA (JEDEC DDR5 78/82-ball) surface-mount package. DDR5 SDRAM is the fifth generation of Double Data Rate synchronous dynamic random-access memory, a class of volatile memory ICs within the broader memory and power-management hierarchy of modern computing systems. Compared with DDR4, DDR5 doubles the bank count, moves the power management IC (PMIC) onto the memory module, reduces the per-channel word length to 16 bits, and lowers the operating voltage from 1.2V to 1.1V, which together raise bandwidth and improve power efficiency for servers, workstations, and AI computing platforms. Key features of the H5CG48AGBDX018N include the 16Gb (2G x 8) single-die density, DDR5-5600 speed grade with an 8-bit data bus width, and a nominal 1.1V core supply that reduces dynamic power versus DDR4-class parts. The x8 organization simplifies memory controller configuration for embedded and module designs, and the device is rated for operation across a -40C to +85C temperature range per distributor data, supporting industrial environments in addition to consumer and computing applications. Technically, the part is manufactured on SK hynix advanced DRAM process technology (the A-die generation per cross-reference sources) and follows the JEDEC DDR5 SDRAM standard interface, including on-die ECC support, decision-feedback equalization (DFE) on the DQ receivers, and an I3C-based sideband bus for host control, all standard characteristics of the DDR5 generation. These features maintain signal integrity at 5600 Mbps pin speeds on conventional PCB stackups. Typical applications include server main memory, AI and high-performance computing modules, industrial controllers requiring firmware boot and embedded logging memory, computing modules and consumer electronics, and replacement sourcing for DDR5-based BOM lines. A key design consideration: DDR5 does not run from a fixed 1.1V rail in module designs - the on-module PMIC regulates the rail, so discrete (solder-down) designs must provide a dedicated 1.1V supply with proper decoupling and follow JEDEC fly-by routing for CA and DQ signals. This page synthesizes distributor pricing, drop-in alternatives, design notes, and lifecycle context not consolidated in the manufacturer datasheet.

USD $87.42 联系我们
H5CG48MEBDX014N - DDR5 16Gb 4800Mbps SDRAM | SK Hynix
H5CG48MEBDX014N

H5CG48MEBDX014N - DDR5 16Gb 4800Mbps SDRAM | SK Hynix

The SK Hynix H5CG48MEBDX014N is a 16Gb (2G x 8) DDR5 SDRAM DRAM component operating at 4800 Mbps data rate, fabricated on SK Hynix M-die process and housed in an 82-ball FBGA package measuring 11 x 10 mm. DDR5 SDRAM (double data rate fifth generation synchronous dynamic random-access memory) is the current generation of main-memory DRAM used in servers, workstations, desktop PCs, and high-performance embedded systems. In the memory hierarchy, DRAM sits below CPU caches and above storage, providing the primary working memory for processors. DDR5 doubles the bank groups and banks per device versus DDR4, splits the power supply so VDDQ is separate from VDD, and moves the power management onto the module via PMIC, delivering higher bandwidth and better power efficiency than DDR4 SDRAM. Key features of the H5CG48MEBDX014N include 16 Gbit density organized as 2G x 8, a 4800 Mbps (PC5-class) data transfer rate, a low 1.1 V nominal core operating voltage, and an operating temperature range of 0C to +95C as listed by distributors. The part carries 12 row address bits and 9 column address bits, per Octopart documentation, giving the addressing structure used in modern DDR5 memory controllers. The x8 organization simplifies ECC-based server module designs where multiple x8 devices provide chipkill-class error coverage. The M-die generation uses SK Hynix advanced DRAM process technology to achieve the 4800 Mbps speed grade at JEDEC-standard DDR5 voltage levels. On-die termination, decision-feedback equalization, and same-bank refresh enhancements characteristic of DDR5 enable reliable signaling at these data rates on standard PCB stackups. Typical applications include server and datacenter DIMMs, desktop and workstation UDIMMs, AI accelerators and high-performance computing boards, industrial systems requiring high memory bandwidth, and embedded compute designs. Design consideration: DDR5 routing requires careful length matching of DQ/CA buses and proper VDDQ decoupling; always validate speed-bin settings and refresh configuration in the memory controller against the manufacturer datasheet. This page synthesizes distributor pricing, cross-referenced drop-in alternatives including SK Hynix A-die and Samsung equivalents, and supply-chain availability data not found in the manufacturer datasheet.

询价 联系我们
H5CG48MEBDX018 - DDR5 16Gb 4800Mbps DRAM | SK Hynix
H5CG48MEBDX018

H5CG48MEBDX018 - DDR5 16Gb 4800Mbps DRAM | SK Hynix

The SK hynix H5CG48MEBDX018 is a 16Gb DDR5 SDRAM DRAM component organized as 2G x8, rated for DDR5-4800 (4800 Mbps data rate), operating from a 1.1V supply in an FCBGA (BGA-78/82-ball) surface-mount package, suited for next-generation compute platforms. DDR5 SDRAM is the fifth generation of Double Data Rate synchronous dynamic random access memory, the dominant main-memory technology in servers, workstations, desktops, and embedded compute modules. Within the memory hierarchy, DDR5 sits above LPDDR (low-power variants for mobile) and GDDR (graphics variants), and is the standard JEDEC-defined DRAM interface for high-bandwidth compute systems. Key features include the 16 Gbit density per die (2G x16 x 8 organization equivalent, 2G x8 bus), a 4800 Mbps data rate, and the DDR5 on-die ECC (ODECC) architecture that improves reliability versus DDR4. The 1.1V core supply reduces per-bit power consumption compared with the 1.2V DDR4 generation, while the on-PDIMM power management architecture moves PMIC functions off the DRAM die, improving signal integrity and efficiency. Technically, the H5CG48MEBDX018 belongs to SK hynix DDR5 SDRAM family; part numbering indicates an M-die generation at the 4800 class speed grade with an 8-bit bus width. The DDR5 interface uses two independent 32-bit sub-channels per module, improving effective concurrency versus the single 64-bit channel of DDR4. Typical applications include PC and workstation DIMMs/Ultra-DIMMs, embedded compute and edge-AI modules, networking equipment line cards, and industrial systems requiring high-density main memory. A key design consideration: DDR5 routing requires careful length matching of DQ/CA and DQS byte lanes, and on-die ECC must be enabled at the memory controller level. This page synthesizes distributor pricing, drop-in alternatives within the SK hynix DDR5 family, and practical sourcing guidance not found in the manufacturer datasheet.

询价 联系我们
H5CG48MEBDX018N - DDR5 16Gb SDRAM FCBGA | SK Hynix
H5CG48MEBDX018N

H5CG48MEBDX018N - DDR5 16Gb SDRAM FCBGA | SK Hynix

The SK Hynix H5CG48MEBDX018N is a 16Gb (2G x 8) DDR5 SDRAM DRAM IC manufactured on SK Hynix M-die process technology, supplied in a 78-ball FCBGA surface-mount package for computing and embedded memory subsystems. DDR5 SDRAM is the fifth generation of Double Data Rate synchronous dynamic random-access memory, the dominant main-memory technology hierarchy that runs from DRAM cell arrays up through memory ICs to full memory modules (DIMMs) and, more broadly, semiconductor storage subsystems. Compared with DDR4, DDR5 doubles the bank groups, moves the power management IC (PMIC) onto the module, and lowers the per-pin operating voltage to 1.1V, enabling higher data rates with improved power efficiency. Key features of this device include a 16Gb density organized as 2G x 8, an 8-bit data bus width, a nominal 1.1V supply, and family data rates spanning 4800 Mbps to 5600 Mbps. DDR5-specific features such as on-die ECC (ODECC), decision-feedback equalization (DFE), and same-bank refresh improve effective reliability and bandwidth utilization in high-density configurations. Technically, the H5CG48MEBDX018N belongs to SK Hynix M-die DDR5 generation; the M-die variants (H5CG48MEBDX014N at 4800 Mbps) are widely documented as drop-in replacements for earlier A-die parts such as the H5CG48AGBDX018N at DDR5-5600, per published cross-reference guidance. Package ballout and command/address pin assignment follow the JEDEC DDR5 x8 component convention, allowing single-sourcing BOM flexibility within the family. Typical applications include PC and workstation main memory, server and data center RDIMM/DIMM modules, embedded computing modules, industrial controllers, and network appliances requiring high-bandwidth main memory. Design consideration: verify the exact data-rate bin and speed-grade suffix of your BOM line against the system memory controller DDR5 training range, since 4800 Mbps and 5600 Mbps variants share the package footprint but differ in timing parameters. This page synthesizes distributor inventory, family cross-references, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
H5TC4G63AFR-G7A - 4Gb DDR3L SDRAM 1.35V | SK Hynix
H5TC4G63AFR-G7A

H5TC4G63AFR-G7A - 4Gb DDR3L SDRAM 1.35V | SK Hynix

The H5TC4G63AFR-G7A is a 4Gb DDR3L SDRAM from SK Hynix, organized as 256M x 16 bits, operating at 1.35V for low power consumption. It is part of the H5TC4G63AFR family, which includes H5TC4G43AFR and H5TC4G83AFR variants, all designed for main memory applications requiring high density, high bandwidth, and low power. The device is lead-free and halogen-free, RoHS compliant, and comes in a 96-ball FBGA package. DDR3L (Double Data Rate 3 Low Voltage) SDRAM is a type of synchronous dynamic random-access memory that operates at 1.35V, reducing power consumption by about 20% compared to standard DDR3 (1.5V). It is part of the DDR3 SDRAM family, which uses double data rate signaling to transfer data on both edges of the clock, achieving high bandwidth. DDR3L is commonly used in mobile devices, embedded systems, and servers where power efficiency is critical. Key features include a 4Gb density, 256M x 16 organization, 1.35V power supply, and a data rate of 1600 Mbps (PC3-12800) as indicated by the -G7A speed grade. The device supports on-die termination (ODT), programmable CAS latency, and burst lengths of 8 and 4. It operates over a temperature range of 0°C to 95°C (case temperature) and is available in a 96-ball FBGA package. The H5TC4G63AFR-G7A uses a CMOS process technology, ensuring high performance and low power. It features auto refresh and self refresh modes, with a refresh period of 7.8us at 85°C. The device includes a mode register for programming various operating parameters, such as CAS latency and burst length. The 96-ball FBGA package provides excellent thermal and electrical performance, making it suitable for space-constrained designs. Typical applications include laptops, ultrabooks, embedded systems, networking equipment, and industrial computing. The low voltage operation makes it ideal for battery-powered devices where power consumption is a concern. The high bandwidth supports memory-intensive applications such as video processing and gaming. When designing with this device, ensure proper decoupling capacitors are placed near the power pins to minimize noise. The VDD and VDDQ should be supplied with 1.35V, and the reference voltage VREF should be set to 0.675V. Follow the PCB layout guidelines in the datasheet to ensure signal integrity at high speeds.

询价 联系我们
H5TC4G63AFR-H9A - 4Gb DDR3L SDRAM 256Mx16 | SK hynix
H5TC4G63AFR-H9A

H5TC4G63AFR-H9A - 4Gb DDR3L SDRAM 256Mx16 | SK hynix

The H5TC4G63AFR-H9A is a 4Gb DDR3L SDRAM organized as 256M x 16, operating at 1.35V, in a 96-ball FBGA package. It is part of SK hynix's DDR3L family, designed for low-power main memory applications requiring high density and bandwidth. The device supports data rates up to 1866 Mbps (PC3-14900) with a CAS latency of 13, and is lead-free and halogen-free, RoHS compliant. DDR3L (Double Data Rate 3 Low Voltage) SDRAM is a type of synchronous dynamic random-access memory that operates at 1.35V, reducing power consumption by about 15% compared to standard 1.5V DDR3. It is part of the DDR3 memory family, which uses double data rate signaling to transfer data on both edges of the clock, and is widely used in laptops, embedded systems, and networking equipment where power efficiency is critical. Key features include a 4Gb density, 16-bit I/O width, 1.35V core and I/O supply, and a 96-ball FBGA package. The device offers programmable CAS latency, burst lengths of 8 and 4, and on-die termination (ODT) for signal integrity. It supports auto-refresh and self-refresh modes, and includes a temperature-compensated self-refresh (TCSR) feature for low-power standby. Technically, the H5TC4G63AFR-H9A uses a 30nm-class process technology, achieving high density with low power. The -H9A speed grade indicates a tCK of 1.07ns (DDR3L-1866) and CL13. The device features a 16n prefetch architecture, enabling high bandwidth. It also includes programmable impedance calibration (ZQ calibration) for improved signal quality. Typical applications include main memory for ultra-thin laptops, embedded computing, networking routers, and industrial PCs. Its low voltage and high density make it ideal for space-constrained designs where power and performance are balanced. When designing with this device, ensure proper decoupling with 0.1uF and 1uF capacitors near the power pins, and follow the PCB layout guidelines for DDR3 routing to maintain signal integrity at 1866 Mbps.

询价 联系我们
H5TC4G63AFR-PBA - 4Gb DDR3L SDRAM 256Mx16 | SK hynix
H5TC4G63AFR-PBA

H5TC4G63AFR-PBA - 4Gb DDR3L SDRAM 256Mx16 | SK hynix

The H5TC4G63AFR-PBA is a 4Gb DDR3L SDRAM organized as 256M x 16, manufactured by SK hynix. It operates at a low voltage of 1.35V, reducing power consumption by approximately 15% compared to standard DDR3 (1.5V). The device is housed in a 96-ball FBGA package, offering a compact footprint suitable for space-constrained applications. With a data rate of up to 1866 Mbps (PC3L-14900), it delivers high bandwidth for demanding computing tasks. DDR3L SDRAM is a type of dynamic random-access memory that uses double data rate architecture, transferring data on both edges of the clock signal. It is part of the DDR3 family, which succeeded DDR2 and was widely adopted in PCs, servers, and embedded systems. DDR3L specifically operates at 1.35V, making it ideal for power-sensitive applications such as laptops, networking equipment, and industrial computing. Key features include a 16-bit I/O interface, 8 internal banks, and support for burst lengths of 8 and 4 (with burst chop). The device includes on-die termination (ODT), ZQ calibration, and write leveling for improved signal integrity. It also supports auto self-refresh and partial array self-refresh for power savings. The operating temperature range is 0°C to +95°C (Tcase), suitable for commercial and industrial environments. Technically, the H5TC4G63AFR-PBA uses a CMOS process and features programmable CAS latency (CL) of 11, 12, and 13, with corresponding tRCD and tRP values. The device supports DLL (Delay-Locked Loop) for precise timing and includes a mode register for configuration. The 96-ball FBGA package has a ball pitch of 0.8mm, enabling high-density PCB layouts. Typical applications include DDR3L memory modules for laptops, embedded systems, networking routers, and industrial PCs. Its low voltage and high density make it suitable for designs requiring energy efficiency and compactness. The device is also used in set-top boxes and automotive infotainment systems. When designing with this component, ensure proper decoupling capacitors near the power pins and follow the layout guidelines in the datasheet to maintain signal integrity at high speeds. The VDD and VDDQ should be supplied with 1.35V, and the reference voltage (VREF) must be generated accurately.

USD $3.98 联系我们
H5TC4G63AFR-PBI - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix
H5TC4G63AFR-PBI

H5TC4G63AFR-PBI - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix

The SK Hynix H5TC4G63AFR-PBI is a 4Gb DDR3L SDRAM organized as 256Mx16, operating at 1.35V with a data rate of DDR3-1600 (PC3L-12800). It comes in a 96-ball FBGA package (TFBGA, BGA96, 9x16, 32) and is designed for industrial temperature range (-40°C to +95°C). This memory device is widely used in networking, embedded computing, and industrial applications where low power and high density are required. DDR3L (Double Data Rate 3 Low Voltage) SDRAM is a type of synchronous dynamic random-access memory that operates at a lower voltage (1.35V) compared to standard DDR3 (1.5V), reducing power consumption by up to 20% while maintaining similar performance. It is part of the DDR3 memory family, which uses double data rate signaling to transfer data on both edges of the clock, and is commonly used in servers, routers, and industrial PCs. DDR3L is backward compatible with DDR3 slots in many designs, making it a versatile choice for memory upgrades. Key features include a 16-bit I/O width, 8 internal banks, and a burst length of 8 (BL8) with on-die termination (ODT) and programmable CAS latency. The device supports auto-refresh and self-refresh modes, with a typical refresh period of 7.8us at 85°C. The industrial temperature grade ensures reliable operation in harsh environments, and the 96-ball FBGA package provides a compact footprint for space-constrained designs. The H5TC4G63AFR-PBI uses a CMOS process technology and features a pseudo-open-drain output driver with adjustable impedance. It includes a DLL (Delay-Locked Loop) for precise timing alignment and supports write leveling for improved signal integrity. The memory operates from a single 1.35V supply, with an on-chip voltage regulator for the core, reducing external component count. Typical applications include network routers and switches, industrial automation controllers, embedded computing modules, and test and measurement equipment. Its low voltage and high density make it ideal for power-sensitive systems that require large memory capacity. When designing with this device, ensure proper decoupling capacitors are placed near the VDD and VDDQ pins, and follow the PCB layout guidelines in the datasheet to minimize signal integrity issues. The device requires a stable 1.35V supply and a clean clock signal for reliable operation.

询价 联系我们
H5TC4G63AFR-PBJ - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix
H5TC4G63AFR-PBJ

H5TC4G63AFR-PBJ - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix

The SK Hynix H5TC4G63AFR-PBJ is a 4Gb DDR3L SDRAM organized as 256M x 16, operating at 1.35V to reduce power consumption while delivering high bandwidth for main memory applications. It comes in a 96-ball TFBGA package with industrial temperature grade, making it suitable for embedded systems, networking equipment, and industrial computing. DDR3L (Double Data Rate 3 Low Voltage) is a type of synchronous dynamic random-access memory (SDRAM) that operates at 1.35V, offering a 15% power reduction compared to standard DDR3 at 1.5V. It is part of the DDR3 family, which uses double data rate signaling to transfer data on both edges of the clock, achieving high bandwidth. DDR3L is widely used in laptops, servers, and embedded systems where power efficiency is critical. Key features include a 256M x 16 organization, 96-ball TFBGA package, industrial temperature grade (-40°C to +95°C), and support for 8192 refresh cycles. The device supports auto self-refresh, data mask, auto precharge, asynchronous reset, dynamic on-chip termination (DTC), ZQ calibration, and write leveling, ensuring reliable operation in demanding environments. The H5TC4G63AFR-PBJ uses a CMOS process and features a rectangular package shape. It is designed for high-density, high-bandwidth, and low-power applications. The industrial temperature grade allows operation in harsh conditions, making it ideal for automotive, industrial, and networking applications. Typical applications include main memory for embedded processors, networking routers and switches, industrial PCs, and test equipment. The low voltage and high bandwidth make it suitable for power-sensitive designs. When designing with this device, ensure proper decoupling and signal integrity practices are followed. The ZQ calibration pin requires a 240-ohm resistor to ground for optimal signal quality.

询价 联系我们
H5TC4G63AFR-PBR - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix
H5TC4G63AFR-PBR

H5TC4G63AFR-PBR - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix

The H5TC4G63AFR-PBR is a 4Gb DDR3L SDRAM (Double Data Rate 3 Low Voltage) organized as 256M x 16, manufactured by SK Hynix. It operates at a supply voltage of 1.35V (with 1.5V compatibility) and is housed in a 96-ball FBGA package (PBGA96). This memory device is designed for high-speed data transfer with a data rate of 1600 Mbps (PC3L-12800), featuring a CAS latency of 11 and a tRCD/tRP of 11. The device supports on-die termination (ODT), programmable CAS latency, and burst lengths of 8 and 4 (with burst chop). It is compliant with the JEDEC DDR3L standard, ensuring interoperability with a wide range of controllers. DDR3L SDRAM is a type of synchronous dynamic random-access memory that transfers data on both edges of the clock signal, effectively doubling the data rate. It is a low-voltage variant of DDR3, operating at 1.35V instead of 1.5V, which reduces power consumption by approximately 15-20% compared to standard DDR3. DDR3L is part of the DDR SDRAM family, which includes DDR, DDR2, DDR3, and DDR4, and is widely used in computing, networking, and embedded systems. The low-voltage operation makes it ideal for power-sensitive applications such as laptops, servers, and industrial electronics. Key features of the H5TC4G63AFR-PBR include a 16-bit I/O interface, 8 internal banks, and a burst length of 8 (BL8) with burst chop (BC4). It supports auto refresh and self refresh modes, with a refresh interval of 7.8us at 85C and 3.9us at 95C. The device has a programmable output driver impedance and on-die termination for improved signal integrity. It also features a temperature-compensated self-refresh (TCSR) and a partial array self-refresh (PASR) for power savings. The package is a 96-ball FBGA with a 0.8mm ball pitch, measuring 13.5mm x 9.0mm, and is RoHS compliant. Technically, the H5TC4G63AFR-PBR uses a CMOS process and supports a clock frequency up to 800 MHz (DDR3L-1600). It has a tCK of 1.25ns and a tRCD of 13.125ns. The device includes a mode register set (MRS) for configuration and supports write leveling and read leveling for improved signal integrity. The I/O interface is SSTL-15 compatible, and the device supports a data strobe (DQS) differential pair. The memory is organized into 8 banks of 32M x 16, providing a total capacity of 4Gb. The device is designed for high-reliability applications and is available in a lead-free, halogen-free package. Typical applications for the H5TC4G63AFR-PBR include embedded systems, networking equipment (routers, switches), industrial PCs, and consumer electronics such as set-top boxes and smart TVs. Its low-voltage operation and high density make it suitable for memory-intensive applications where power efficiency is critical. The device is also used in automotive infotainment systems and medical devices that require reliable, high-speed memory. When designing with this device, ensure proper decoupling capacitors (0.1uF and 1uF) are placed near the VDD and VDDQ pins to minimize noise. The VREFCA and VREFDQ should be bypassed with 0.1uF capacitors. The device requires a stable 1.35V supply and a separate 1.35V VDDQ supply. For optimal signal integrity, route the DQ, DQS, and address lines with matched trace lengths and controlled impedance (typically 50 ohms single-ended, 100 ohms differential).

USD $5.91 联系我们
H5TC4G63CFR-H9A - 4Gb DDR3L SDRAM 96-FBGA | SK hynix
H5TC4G63CFR-H9A

H5TC4G63CFR-H9A - 4Gb DDR3L SDRAM 96-FBGA | SK hynix

The H5TC4G63CFR-H9A is a 4Gb DDR3L SDRAM manufactured by SK hynix, organized as 256M x 16 bits. It operates at a low voltage of 1.35V (VDD=VDDQ=1.35V + 0.100 / - 0.067V), enabling power-efficient main memory solutions. The device is housed in a 96-ball TFBGA package, providing a compact footprint for space-constrained designs. It is lead-free and halogen-free, fully RoHS compliant, and supports a temperature range suitable for commercial and industrial applications. DDR3L SDRAM is a type of synchronous dynamic random-access memory that operates at a lower voltage (1.35V) compared to standard DDR3 (1.5V), reducing power consumption by up to 20% while maintaining backward compatibility with DDR3 environments. It is part of the DDR3 memory family, which uses double data rate architecture to transfer data on both edges of the clock, achieving high bandwidth. DDR3L is widely used in laptops, embedded systems, and networking equipment where energy efficiency is critical. Key features include fully differential clock inputs (CK, CK), differential data strobe (DQS, DQS), and an on-chip DLL that aligns DQ, DQS, and DQS transitions with CK transitions. The DM (data mask) function masks write data at both rising and falling edges, ensuring data integrity. The device supports burst lengths of 8 and 4 (with burst chop), and features programmable CAS latency and additive latency for flexible timing. The H5TC4G63CFR-H9A is designed for high-bandwidth, low-power main memory applications. Its 4Gb density and x16 organization make it ideal for applications requiring large memory capacity with a moderate bus width. The 96-ball TFBGA package offers excellent thermal and electrical performance, with a ball pitch of 0.8mm, facilitating high-density PCB layouts. Typical applications include laptops and ultrabooks, embedded computing, networking switches and routers, and industrial automation systems. The low operating voltage and high bandwidth make it suitable for battery-powered devices and energy-conscious designs. When designing with this component, ensure proper decoupling capacitors are placed near the VDD and VDDQ pins to minimize noise. The device requires a stable 1.35V supply and careful signal integrity management for the high-speed data bus. Refer to the datasheet for detailed timing parameters and PCB layout guidelines.

询价 联系我们
H5TC4G63CFR-H9I - 4Gb DDR3L SDRAM 256Mx16 | SK hynix
H5TC4G63CFR-H9I

H5TC4G63CFR-H9I - 4Gb DDR3L SDRAM 256Mx16 | SK hynix

The H5TC4G63CFR-H9I is a 4Gb DDR3L SDRAM from SK hynix, organized as 256M x 16 bits. It operates at a low voltage of 1.35V, reducing power consumption by about 15% compared to standard DDR3 (1.5V). The device is housed in a 96-ball TFBGA package and is designed for industrial temperature range (-40°C to +95°C). It is lead-free and halogen-free, compliant with RoHS. DDR3L SDRAM is a type of dynamic random-access memory that uses double data rate architecture, transferring data on both edges of the clock. It is a key component in computing systems, providing high bandwidth and low power operation for main memory applications. The H5TC4G63CFR-H9I is part of the DDR3L family, which is widely used in servers, networking equipment, and embedded systems. Key features include a 4Gb density, 16-bit data bus, and support for data rates up to 1866 Mbps (PC3-14900). The device operates from a 1.35V supply, with an I/O voltage of 1.35V. It features programmable CAS latency, burst lengths of 8 and 4, and on-die termination (ODT) for improved signal integrity. The industrial temperature grade ensures reliable operation in harsh environments. The H5TC4G63CFR-H9I uses a high-performance CMOS process and advanced circuit design to achieve fast access times and low power consumption. It includes auto-refresh and self-refresh modes to minimize power in standby. The TFBGA package provides excellent thermal and electrical performance, making it suitable for space-constrained designs. Typical applications include main memory for industrial PCs, networking routers, and embedded computing modules. Its low voltage and industrial temperature range make it ideal for applications requiring reliability and energy efficiency. When designing with this device, ensure proper decoupling and signal integrity practices are followed. The DDR3L interface requires careful PCB layout to maintain signal quality at high speeds.

询价 联系我们
H5TC4G63CFR-H9J - 4Gb DDR3L SDRAM 96-Ball TFBGA | SK Hynix
H5TC4G63CFR-H9J

H5TC4G63CFR-H9J - 4Gb DDR3L SDRAM 96-Ball TFBGA | SK Hynix

The H5TC4G63CFR-H9J is a 4Gb DDR3L SDRAM from SK Hynix, organized as 256M x 16, operating at a nominal supply voltage of 1.35V (VDD=VDDQ=1.35V +0.100/-0.067V). It is housed in a 96-ball TFBGA (Thin Fine-Pitch Ball Grid Array) package with a rectangular body, designed for high-density main memory applications requiring low power and high bandwidth. The device is lead-free and halogen-free, compliant with RoHS regulations, and supports industrial temperature grades. DDR3L (Double Data Rate 3 Low Voltage) SDRAM is a type of synchronous dynamic random-access memory that operates at a lower voltage (1.35V) compared to standard DDR3 (1.5V), reducing power consumption by approximately 20-30% while maintaining similar performance. It is part of the DDR3 memory family, which uses double data rate signaling to transfer data on both rising and falling edges of the clock, and is widely used in servers, networking equipment, and embedded systems where power efficiency is critical. Key features include fully differential clock inputs (CK, CK) for improved signal integrity, differential data strobes (DQS, DQS) for precise data capture, and an on-chip DLL that aligns DQ, DQS, and DQS transitions with the CK transition. The DM (Data Mask) function masks write data on both rising and falling edges, enabling byte-level write operations. The device supports industrial temperature range, making it suitable for harsh environments. Technically, the H5TC4G63CFR-H9J utilizes a CMOS process and features a 4-bit prefetch architecture typical of DDR3, achieving data rates up to 1866 Mbps (PC3-14900) at the -H9 speed grade. The 96-ball TFBGA package provides excellent thermal and electrical performance, with a compact footprint for space-constrained designs. The device is designed for high reliability and low power operation, with support for on-die termination (ODT) and programmable CAS latency. Typical applications include main memory for industrial PCs, networking routers and switches, embedded computing modules, and high-performance storage systems. The low voltage and high density make it ideal for power-sensitive applications where battery life or thermal management is a concern. When designing with this device, ensure proper decoupling of the VDD and VDDQ supplies with 0.1uF and 1uF capacitors placed close to the balls. Follow the PCB layout guidelines in the datasheet for signal integrity, especially for the differential clock and data strobe pairs.

询价 联系我们
H5TC4G63CFR-PBA - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix
H5TC4G63CFR-PBA

H5TC4G63CFR-PBA - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix

The H5TC4G63CFR-PBA is a 4Gb DDR3L SDRAM organized as 256M x 16, manufactured by SK Hynix. It operates at VDD=VDDQ=1.35V with a tolerance of +0.100/-0.067V, enabling low-power operation for mobile and embedded systems. The device is housed in a 96-ball FBGA package (PBGA96) and is lead-free and halogen-free, fully RoHS compliant. DDR3L (Double Data Rate 3 Low Voltage) SDRAM is a type of synchronous dynamic random-access memory that operates at 1.35V, reducing power consumption by about 20% compared to standard DDR3 (1.5V). It is part of the DDR3 memory family, which uses double data rate signaling to transfer data on both edges of the clock, and is widely used in computing, networking, and industrial applications where power efficiency is critical. Key features include fully differential clock inputs (CK, CK) for improved signal integrity, differential data strobe (DQS, DQS) for precise data capture, and an on-chip DLL that aligns DQ, DQS, and DQS transitions with CK. The DM (data mask) function masks write data on both rising and falling edges, and the device supports auto precharge, auto self-refresh, and dynamic on-chip termination (ODT) for signal quality. The H5TC4G63CFR-PBA uses a CMOS process and includes ZQ calibration for output driver and ODT impedance matching, write leveling for command/address timing, and asynchronous reset for initialization. These features ensure reliable high-speed operation and simplify system design. Typical applications include DDR3L memory modules for laptops, embedded systems, networking equipment (routers, switches), and industrial PCs. Its low voltage and high density make it ideal for power-sensitive designs. When designing with this device, ensure proper decoupling and follow the PCB layout guidelines in the datasheet to maintain signal integrity at high frequencies. The device requires a stable 1.35V supply and careful termination of the differential clock and strobe lines.

USD $6.23 联系我们
H5TC4G63CFR-PBL - 4Gb DDR3L SDRAM 256Mx16 | SK hynix
H5TC4G63CFR-PBL

H5TC4G63CFR-PBL - 4Gb DDR3L SDRAM 256Mx16 | SK hynix

The H5TC4G63CFR-PBL is a 4Gb DDR3L SDRAM (Double Data Rate 3 Low Voltage) memory chip from SK hynix, organized as 256M x 16 bits. It operates at a low voltage of 1.35V, making it ideal for power-sensitive applications such as mobile devices, embedded systems, and networking equipment. The device is available in a 96-ball FBGA package (TFBGA) and is lead-free and halogen-free, complying with RoHS standards. DDR3L SDRAM is a type of synchronous dynamic random-access memory that transfers data on both edges of the clock signal, doubling the data rate compared to single data rate SDRAM. The 'L' denotes low voltage operation at 1.35V, reducing power consumption by about 15% compared to standard DDR3 at 1.5V. This makes DDR3L a preferred choice for battery-powered and thermally constrained designs. Key features of the H5TC4G63CFR-PBL include a data rate of 1600 Mbps (PC3L-12800), a burst length of 8, and support for on-die termination (ODT) and posted CAS. The device also features auto refresh and self refresh modes, with a typical refresh period of 7.8 us at 85C. The 96-ball FBGA package provides a compact footprint suitable for high-density PCB layouts. The H5TC4G63CFR-PBL uses a high-performance CMOS process technology, ensuring fast access times and low power consumption. The memory array is organized into 8 banks, each with 32K rows, providing efficient row activation and precharge operations. The device supports a programmable CAS latency of 11, 12, and 13, allowing flexibility in system timing. Typical applications include main memory for laptops, ultrabooks, and embedded systems, as well as networking equipment such as routers and switches, and industrial automation controllers. The low voltage and high bandwidth make it suitable for applications requiring high memory density and low power. When designing with this device, ensure proper decoupling capacitors are placed near the VDD and VDDQ pins to minimize power supply noise. Also, follow the JEDEC DDR3L layout guidelines for signal integrity, especially for high-speed data lines.

询价 联系我们
H5TC4G63CFR-xxI - 4Gb DDR3L SDRAM | SK Hynix
H5TC4G63CFR-xxI

H5TC4G63CFR-xxI - 4Gb DDR3L SDRAM | SK Hynix

The H5TC4G63CFR-xxI is a 4Gb DDR3L SDRAM manufactured by SK Hynix, designed for main memory applications requiring high density, high bandwidth, and low power operation at 1.35V. It operates with VDD=VDDQ=1.35V +0.100/-0.067V, features fully differential clock inputs (CK, CK), differential data strobes (DQS, DQS), and an on-chip DLL to align DQ, DQS, and DQS transitions with CK. The device is lead-free and halogen-free, RoHS compliant, and comes in a 78-ball FBGA package. DDR3L (Double Data Rate 3 Low Voltage) SDRAM is a type of synchronous dynamic random-access memory that achieves high data transfer rates by transferring data on both edges of the clock signal. It operates at a lower voltage (1.35V) compared to standard DDR3 (1.5V), reducing power consumption by about 20% while maintaining similar performance. DDR3L is part of the DDR3 memory family, which is widely used in computing, networking, and embedded systems. Key features include a 4Gb density organized as 512M x 8, a data rate of [DATA_NEEDED: speed grade] (e.g., 1600 Mbps), and support for 1.35V operation. The device uses an 8n-prefetch architecture, which enables high bandwidth by fetching 8 data words per clock cycle. It also supports on-die termination (ODT), programmable CAS latency, and burst lengths of 8 and 4 (with burst chop). The H5TC4G63CFR-xxI is fabricated using advanced DRAM process technology, ensuring high reliability and low power consumption. The on-chip DLL synchronizes the output data with the clock, reducing skew and improving signal integrity. The device includes auto-refresh and self-refresh modes for low-power standby, and it supports temperature-compensated self-refresh (TCSR) to optimize refresh rate based on operating temperature. Typical applications include servers, networking equipment, industrial computing, and embedded systems where high memory density and low power are critical. The 1.35V operation makes it ideal for power-sensitive designs, such as laptops, portable devices, and energy-efficient data centers. When designing with this device, ensure proper decoupling of VDD and VDDQ with 0.1uF capacitors placed close to the pins. Follow the DDR3L layout guidelines for signal integrity, including matched trace lengths for DQ, DQS, and address/command signals. The device requires a stable 1.35V supply and a clean reference voltage (VREF) for optimal operation.

询价 联系我们
H5TC4G63CFR-xxJ - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix
H5TC4G63CFR-xxJ

H5TC4G63CFR-xxJ - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix

The H5TC4G63CFR-xxJ is a 4Gb DDR3L SDRAM manufactured by SK Hynix, organized as 256M x 16. It operates at a low supply voltage of VDD = VDDQ = 1.35V, making it ideal for power-sensitive applications such as mobile devices, embedded systems, and networking equipment. The device features fully differential clock inputs (CK, CK#), differential data strobes (DQS, DQS#), and an on-chip DLL that aligns DQ, DQS, and DQS# transitions with the CK transition. It is lead-free and halogen-free, compliant with RoHS standards. DDR3L SDRAM (Double Data Rate 3 Low Voltage) is a type of synchronous dynamic random-access memory that transfers data on both rising and falling edges of the clock signal, effectively doubling the data rate. DDR3L operates at 1.35V, reducing power consumption by about 20% compared to standard DDR3 (1.5V), while maintaining compatibility with DDR3 signaling levels. It is part of the memory hierarchy in computing systems, serving as main memory for processors, and is widely used in laptops, servers, and embedded applications. Key features include a 4Gb density, 16-bit I/O width, and support for various speed grades (e.g., -xxJ indicates a specific speed grade, likely 1600 Mbps or 1866 Mbps). The device uses a 96-ball FBGA package, which is standard for DDR3L SDRAM, ensuring compatibility with existing PCB designs. The operating temperature range is from 0°C to 95°C (case temperature), and it supports auto-refresh and self-refresh modes for power saving. Technically, the H5TC4G63CFR-xxJ employs an 8n-prefetch architecture, which allows high-speed data transfer by fetching 8 data bits per clock cycle per I/O. It includes programmable CAS latency, burst length (8 and 4 with burst chop), and on-die termination (ODT) for signal integrity. The device also supports write leveling and read leveling for improved timing margins in high-speed systems. Typical applications include main memory for laptops, ultrabooks, and embedded systems, as well as networking equipment like routers and switches, and industrial computing platforms. Its low voltage and high density make it suitable for power-constrained designs that require large memory capacity. When designing with this component, ensure proper decoupling capacitors near the VDD and VDDQ pins, and follow the DDR3L layout guidelines for signal integrity, including impedance matching and length matching for data and address lines. The device requires a stable 1.35V supply and a reference voltage (VREF) for the command/address bus.

询价 联系我们
H5TC4G63CFR-xxL - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix
H5TC4G63CFR-xxL

H5TC4G63CFR-xxL - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix

The H5TC4G63CFR-xxL is a 4Gb low power Double Data Rate III (DDR3L) Synchronous DRAM manufactured by SK Hynix. It is organized as 256M x 16 and operates at a low voltage of 1.35V, making it ideal for main memory applications that require large memory density, high bandwidth, and low power operation. The device is lead-free and halogen-free, compliant with RoHS standards, and is available in a 96-pin FBGA package. DDR3L SDRAM is a type of dynamic random-access memory that operates at a lower voltage (1.35V) compared to standard DDR3 (1.5V), reducing power consumption by approximately 20% while maintaining backward compatibility with DDR3-based environments. It is part of the DDR3 memory family, which uses double data rate signaling to transfer data on both edges of the clock, achieving high bandwidth. DDR3L is commonly used in laptops, embedded systems, and networking equipment where power efficiency is critical. Key features of the H5TC4G63CFR-xxL include a 4Gb density, 256M x 16 organization, 1.35V power supply, and support for data rates up to 2133 Mbps (depending on the speed grade). The device offers low power consumption, with a typical operating current of [DATA_NEEDED: IDD0] and standby current of [DATA_NEEDED: IDD2P]. It also features on-die termination (ODT), programmable CAS latency, and burst lengths of 8 and 4 (with burst chop). The device is designed for reliable operation over a temperature range of [DATA_NEEDED: operating temperature range]. The H5TC4G63CFR-xxL utilizes advanced DRAM process technology, providing high density and performance while minimizing power consumption. The 96-pin FBGA package offers excellent thermal and electrical characteristics, supporting high-speed signaling with minimal parasitic inductance. The device includes auto-refresh and self-refresh modes to maintain data integrity with minimal power draw. Typical applications include main memory for laptops and ultrabooks, embedded systems, networking equipment, and industrial computing. The low voltage and high bandwidth make it suitable for power-sensitive designs that require high performance. The device is also used in memory modules and system-on-module (SoM) designs. When designing with this component, ensure proper decoupling capacitors are placed near the power pins to minimize noise. The DDR3L interface requires careful PCB layout to maintain signal integrity, including matched trace lengths and controlled impedance. Refer to the SK Hynix datasheet for detailed design guidelines and timing parameters.

询价 联系我们
H5TC4G63MFR-PBA - 4Gb DDR3L SDRAM 256Mx16 | SK hynix
H5TC4G63MFR-PBA

H5TC4G63MFR-PBA - 4Gb DDR3L SDRAM 256Mx16 | SK hynix

The H5TC4G63MFR-PBA is a 4Gb DDR3L SDRAM organized as 256M x 16, manufactured by SK hynix. It operates at a supply voltage of 1.35V (VDD and VDDQ) with a range of +0.100V/-0.067V, and is housed in a 96-ball FBGA package. This memory device supports data rates up to 1866 Mbps (PC3L-14900) and is designed for low-power applications, offering a significant reduction in power consumption compared to standard DDR3. DDR3L SDRAM (Double Data Rate 3 Low Voltage) is a type of synchronous dynamic random-access memory that operates at 1.35V, reducing power consumption by about 20% compared to standard 1.5V DDR3. It is part of the DDR3 family, which uses double data rate architecture to transfer data on both edges of the clock, achieving high bandwidth. DDR3L is commonly used in mobile devices, embedded systems, and enterprise servers where power efficiency is critical. Key features include a 16-bit I/O configuration, 8 internal banks, and support for various burst lengths (BL8 and BL4 with burst chop). The device includes on-die termination (ODT), ZQ calibration, write leveling, and dynamic ODT for improved signal integrity. It also supports auto self-refresh and a temperature-compensated self-refresh rate to minimize standby power. The H5TC4G63MFR-PBA uses a 30nm-class process technology, enabling high density with low power. It features programmable CAS latency (CL), CAS write latency (CWL), and additive latency, allowing flexibility in system timing. The device is compliant with JEDEC DDR3L standards, ensuring interoperability with a wide range of controllers. Typical applications include mobile computing, networking equipment, industrial automation, and embedded systems where low power and high performance are required. Its 256Mx16 organization is ideal for systems needing a single high-density memory chip with a 16-bit data bus. When designing with this device, ensure proper decoupling capacitors near the power pins and follow the PCB layout guidelines in the datasheet to maintain signal integrity at high speeds. The device requires a stable 1.35V supply and careful termination of the address/control bus.

询价 联系我们
H5TQ2G63GFR-TEC - 2Gb DDR3 SDRAM 128Mx16 FBGA-96 | SK Hynix
H5TQ2G63GFR-TEC

H5TQ2G63GFR-TEC - 2Gb DDR3 SDRAM 128Mx16 FBGA-96 | SK Hynix

The SK Hynix H5TQ2G63GFR-TEC is a 2 Gigabit DDR3 SDRAM organized as 128M x 16 bits, with industrial -40C to +95C operating temperature support, in a 96-ball FBGA (PBGA-96) lead-free, halogen-free RoHS-compliant package. DDR3 SDRAM (Double Data Rate 3 Synchronous DRAM) is a CMOS dynamic random-access memory that transfers data on both rising and falling edges of a differential clock, doubling bandwidth versus single-data-rate designs. Within the memory hierarchy it sits below DDR4/DDR5 generations and above DDR2, and it remains the dominant DRAM class for cost-sensitive industrial, networking, and embedded main-memory designs requiring large density and high bandwidth on a 1.5V-class interface. Key features of the H5TQ2G63 family include fully synchronous operation referenced to both clock edges, auto self-refresh, an auto precharge function, an asynchronous reset function, data mask (DM) support for byte-wise write masking, dynamic on-die termination (ODT), ZQ calibration for output impedance matching, and write leveling for fly-by topology signal integrity. The -TEC speed-grade suffix denotes an extended industrial temperature rating, making this variant suitable for uncontrolled-environment systems. Architecturally, the device contains multiple banks with row activation, column read/write pipelines, and burst lengths of 8 (BL8) with on-the-fly addressing, as described in the manufacturer datasheet. Source data identifies the related H5TQ2G63DFR parts as 2,147,483,648-bit CMOS DDR3 SDRAMs operating at up to 933 MHz clock (DDR3-1866 class), ideally suited for main memory applications requiring large memory density and high bandwidth. Typical applications include embedded main memory for industrial controllers, networking and communication equipment, set-top boxes, and FPGA-based processing boards that implement DDR3 memory controllers. The x16 organization simplifies 16-bit and 32-bit wide memory subsystems with two devices. Design consideration: DDR3 signal integrity depends on length-matched routing, ODT configuration via mode registers, and correct ZQ calibration resistor placement; follow the reference routing guidelines in the manufacturer datasheet. This page synthesizes distributor pricing, same-family drop-in alternatives, application guidance, and design notes not found in the manufacturer datasheet.

询价 联系我们
H5TQ4G63AFR-H9C - 4Gb DDR3 SDRAM 256Mx16 | SK Hynix
H5TQ4G63AFR-H9C

H5TQ4G63AFR-H9C - 4Gb DDR3 SDRAM 256Mx16 | SK Hynix

The H5TQ4G63AFR-H9C is a 4Gb CMOS Double Data Rate III (DDR3) Synchronous DRAM from SK Hynix, organized as 256M x 16. It operates at a clock speed of 0.255ns (tCK) and is packaged in a 96-ball TFBGA (Thin Fine-Pitch Ball Grid Array) with a rectangular shape. This device is designed for main memory applications requiring high density and bandwidth, offering fully synchronous operations referenced to both rising and falling edges of the clock. It supports a supply voltage of 1.5V and features 8192 refresh cycles, ensuring data integrity in high-performance computing environments. DDR3 SDRAM (Double Data Rate Type 3 Synchronous Dynamic Random-Access Memory) is a type of memory that transfers data on both edges of the clock signal, effectively doubling the data rate compared to single-data-rate SDRAM. It is a key component in the memory hierarchy, serving as the main system memory in computers, servers, and embedded systems. DDR3 is the successor to DDR2 and offers higher bandwidth and lower power consumption, making it suitable for a wide range of applications from consumer electronics to enterprise data centers. Key features of the H5TQ4G63AFR-H9C include a 4Gb density, 256M x 16 organization, and a 96-ball TFBGA package. It is halogen-free and RoHS compliant, meeting environmental standards. The device operates with a 1.5V power supply and supports a data rate of 0.255ns (approximately 3.9 Gbps per pin). The refresh cycle count of 8192 ensures reliable operation over extended periods. The package is designed for surface mount technology, enabling compact and high-density PCB layouts. Technically, the H5TQ4G63AFR-H9C utilizes advanced CMOS process technology to achieve high speed and low power. It features programmable CAS latency, burst length, and other timing parameters via the mode registers, allowing system designers to optimize performance. The device supports on-die termination (ODT) and dynamic ODT for improved signal integrity, which is critical at high data rates. The 96-ball TFBGA package provides excellent thermal and electrical performance, with a ball pitch of 0.8mm, facilitating routing and manufacturing. Typical applications for the H5TQ4G63AFR-H9C include desktop and laptop computers, servers, networking equipment, and embedded systems that require high-capacity, high-bandwidth memory. Its 256M x 16 organization is ideal for systems with a 16-bit data bus, such as many microprocessors and SoCs. The device's low power consumption and high reliability make it suitable for both consumer and industrial applications. When designing with this DDR3 SDRAM, it is essential to ensure proper signal integrity by following the layout guidelines for high-speed memory interfaces, including controlled impedance traces, proper termination, and decoupling. The memory controller must be configured to match the device's timing parameters, such as CAS latency and burst length, to achieve optimal performance. Additionally, thermal management should be considered, as high-speed operation can generate significant heat.

USD $6.50 联系我们
H9JCNNNBK3MLYR-N6E - 16Gb LPDDR5-6400 SDRAM | SK Hynix
H9JCNNNBK3MLYR-N6E

H9JCNNNBK3MLYR-N6E - 16Gb LPDDR5-6400 SDRAM | SK Hynix

The SK Hynix H9JCNNNBK3MLYR-N6E is a 16 Gb (2 GB) LPDDR5-6400 SDRAM organized as 512M x 32 with a 1.05 V core supply, housed in a 315-ball TFBGA package. It delivers a 6400 Mbps per-pin data rate over a dual-channel architecture, targeting high-bandwidth, power-sensitive mobile and embedded platforms. LPDDR5 (Low-Power Double Data Rate 5) is the fifth generation of the JEDEC low-power DRAM standard, positioned above LPDDR4X in the memory hierarchy: LPDDR5 SDRAM -> low-power DRAM -> DRAM -> volatile memory IC. Unlike standard DDR5 DIMM modules, LPDDR5 devices are soldered directly to the PCB, use a narrow 32-bit (x32) channel, and trade socketability for dramatically lower I/O power and a smaller footprint. The 1.05 V VDD2 rail is lower than the 1.1 V of LPDDR4X, which is the primary lever for reducing total memory power in battery-operated systems. Key differentiators of this part include its 6400 Mbps pin speed (a 33% uplift over LPDDR4X-4266), the 512M x 32 organization that maps cleanly onto 32-bit SoC memory controllers, and the TFBGA-315 ballout that is footprint-compatible across the SK Hynix LPDDR5 family. The device supports bank-group architecture and a low-power clock-stop mode for aggressive idle power reduction. Architecturally, the die uses SK Hynix's advanced 1-alpha-class DRAM process and integrates on-die termination (ODT), a programmable write-leveling scheme, and per-bank refresh to reduce peak current. The dual-channel x16+x16 internal split allows the controller to interleave accesses and hide refresh latency, which is critical for sustained bandwidth in AI inference and 4K video pipelines. Typical applications include flagship smartphones, automotive ADAS domain controllers, edge AI inference modules, 5G CPE and small cells, AR/VR headsets, and industrial machine-vision systems. In each case the 6400 Mbps rate and 1.05 V rail allow the SoC to hit its memory-bandwidth target without a discrete power penalty. A key design consideration is that LPDDR5 requires careful PCB trace-length matching and impedance control on the 32-bit data bus; unlike a DIMM, there is no module-level calibration, so signal integrity must be engineered at the board level. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $24.37 联系我们
H9JCNNNBK3MLYR-N6E - 16Gb LPDDR5-6400 SDRAM | SK Hynix
H9JCNNNBK3MLYR-N6E

H9JCNNNBK3MLYR-N6E - 16Gb LPDDR5-6400 SDRAM | SK Hynix

The SK Hynix H9JCNNNBK3MLYR-N6E is a 16 Gb LPDDR5-6400 SDRAM organized 512M x 32 on a 16-bit data bus, supplied in a 315-ball TFBGA (TFBGA-315) surface-mount package and rated for data rates up to 6400 Mbps. It operates from a 1.05 V main supply (range 1.01 V to 1.12 V) with a 1.7 V to 1.95 V rail for the DRAM array, and is qualified to industrial thermal envelopes typical of mobile and embedded platforms. The device belongs to the SK Hynix H9JCNNN family of LPDDR5 products targeting power-sensitive, high-bandwidth applications. An LPDDR5 SDRAM (Low-Power Double Data Rate 5 Synchronous DRAM) is a JEDEC-defined volatile memory standard optimized for mobile and embedded systems where bandwidth density and energy per bit are the dominant design constraints. LPDDR5 succeeds LPDDR4/4X by adding sub-channels, higher per-pin data rates (up to 6400 Mbps/pin in this -N6E speed grade), improved command/address efficiency via ECC-on-command and dynamic frequency scaling, and a deep-sleep state for idle retention. In the broader hierarchy LPDDR5 sits under DRAM -> volatile memory -> semiconductor memory -> integrated circuit, and competes architecturally with LPDDR5X and DDR5 in mobile SoC designs. Key features of the H9JCNNNBK3MLYR-N6E include 6400 Mbps per-pin data rate, dual 16-bit sub-channels for a 32-bit logical interface, on-die temperature sensor, refresh management, and WriteX/ReadX training features defined by the LPDDR5 standard. The 315-ball TFBGA package is designed for high-density PCB layouts with matched-length routing, supporting both mobile form factors and embedded module designs. The H9JCNNNBK3MLYR-N6E is typically designed into smartphone application processors, AI edge inference modules, tablet SoCs, and automotive infotainment platforms where sustained memory bandwidth must be delivered within tight thermal envelopes. Its low-voltage operation and deep-sleep states also make it suitable for always-on inference and wearable compute. When designing with this part, observe JEDEC LPDDR5 PCB layout guidelines: matched impedance for command/address and data lanes, length matching within a sub-channel, decoupling concentrated near the package, and a clean 1.05 V LDO/DC-DC rail. Verify pin-out against the official SK Hynix datasheet before board fab to confirm the -N6E ball map. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement the SK Hynix datasheet, helping engineers validate BOM, footprint, and power budget decisions for LPDDR5-based designs.

USD $18.20 有现货