微控制器

产品（20,000+)

MCF5307FT90B - 90MHz ColdFire V3 MCU ROMless 208-FQFP | NXP
MCF5307FT90B

MCF5307FT90B - 90MHz ColdFire V3 MCU ROMless 208-FQFP | NXP

The NXP MCF5307FT90B is a 32-bit ColdFire V3 microprocessor (MCU) running at 90 MHz with ROMless architecture, housed in a 208-pin FQFP (28x28 mm) surface-mount package. It integrates the ColdFire V3 core with on-chip peripherals, EMAC, USB, and external memory controller for embedded industrial and networking designs. The MCF5307FT90B belongs to the MCF530x family originally introduced by Motorola Freescale and now maintained by NXP Semiconductors. A microcontroller (MCU) is a single-chip computer containing a processor core, memory, and programmable I/O peripherals. The ColdFire V3 architecture is a variable-length RISC instruction set derived from the original Motorola 68000 family, optimized for embedded systems that require deterministic performance, low power, and a rich peripheral set. Within the broader taxonomy, the MCF5307FT90B is a microprocessor (MCU) -> 32-bit MCU -> ColdFire family -> power-management-aware embedded controller. Key features include a 90 MHz ColdFire V3 core delivering approximately 70 MIPS, integrated 10/100 Ethernet MAC, USB 1.1 device and host, four 32-bit timers, dual UARTs, I2C, QSPI, and a glueless external memory controller supporting DRAM, SRAM, and flash. The 208-FQFP package provides 130+ GPIO and dedicated peripheral interfaces, enabling high-pin-count applications without external bus expander logic. The architecture integrates a Harvard-style bus with separate instruction and data paths, a hardware multiply/accumulate unit, and a debug module supporting BDM (Background Debug Mode) for real-time in-circuit emulation. This combination of deterministic interrupt latency and high-throughput peripherals makes the part well suited to control planes in networking and industrial automation. Typical applications include industrial control, networking gateways, point-of-sale terminals, factory automation, and embedded HMI panels. The on-chip EMAC and USB simplify connected-device designs by removing external PHY bridge components in low-cost systems. When designing with the MCF5307FT90B, ensure the 3.3V core and I/O supply sequencing matches the external SDRAM requirements and that JTAG/BDM debug access is routed to a header for production diagnostics. Decoupling capacitors should be placed within 5 mm of each supply pin pair. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Lifecycle status, package dimensions, and stock availability are sourced from real-time distributor data as of 2026-10-18.

询价 联系我们
MCF5327CVM240J - ColdFire V3 240MHz MPU 196-LBGA | NXP
MCF5327CVM240J

MCF5327CVM240J - ColdFire V3 240MHz MPU 196-LBGA | NXP

The NXP (formerly Freescale) MCF5327CVM240J is a ColdFire V3 family 32-bit microprocessor running at 240 MHz, housed in a 196-ball LBGA (MAPBGA) 15x15 mm package with integrated LCD controller. The MCF532x family targets human-machine interface (HMI) and industrial control applications, combining a variable-length RISC core with rich connectivity and security integration. Key features include 32 KB internal SRAM, 94 user I/O lines, ROMless external memory interface, JTAG/BDM debug, and an integrated TFT/LCD controller. The ColdFire V3 core delivers 211 MIPS at 240 MHz while maintaining code compatibility with the wider ColdFire ecosystem, easing migration from older V2 designs. The architecture pairs the V3 core with a 32-bit system bus, dedicated DMA channels, and a peripheral set that includes Ethernet MAC, USB 2.0 Full-Speed OTG, CAN, SPI, I2C, UARTs, and a 16-bit external memory controller supporting SDRAM, SRAM, and NOR flash. The integrated LCD controller supports TFT panels up to 800x600, eliminating the need for an external graphics controller in many HMI designs. Typical applications include industrial HMI panels, factory automation controllers, point-of-sale terminals, medical instrument displays, building automation touch panels, and embedded operator interfaces. The combination of Ethernet, USB, CAN, and LCD in one package reduces BOM cost and PCB area. Designers should verify that the LBGA 15x15 mm land pattern is acceptable for their manufacturing process (X-ray or AOI inspection is recommended for BGA rework) and that thermal vias under the package are adequate for the application power profile. This page consolidates distributor pricing, drop-in alternatives, and design guidance not found in the manufacturer datasheet, enabling faster part selection and lifecycle planning.

询价 联系我们
MCF53281CVM240 - ColdFire V3 MPU, 240MHz, 256-MAPBGA | NXP
MCF53281CVM240

MCF53281CVM240 - ColdFire V3 MPU, 240MHz, 256-MAPBGA | NXP

The NXP MCF53281CVM240 is a ColdFire V3 MCF532x family 32-bit microprocessor running at 240 MHz, with no on-chip program memory (ROMless) and housed in a 256-pin MAPBGA (17x17 mm) package. The MCF532x family integrates the first LCD controller on a ColdFire device, addressing HMI and industrial control while keeping a rich connectivity and security feature set. A ColdFire microprocessor is a 32-bit variable-length RISC processor core derived from the original Motorola 68000 architecture. ColdFire V3 devices target embedded applications requiring deterministic performance with low power. The MCF532x sits within the NXP ColdFire MPU taxonomy: ColdFire -> 32-bit embedded MPU -> microprocessor -> integrated circuit. This category hierarchy helps engineers and AI knowledge graphs reason about fit-for-purpose when comparing against ARM Cortex-M or other 32-bit MCU/MPU families. Key features include the Version 3 ColdFire variable-length RISC core, system debug via JTAG (IEEE 1149.1) for board-level test, an integrated LCD controller for direct TFT/STN panel drive, Ethernet MAC, USB On-The-Go, CAN, and security peripherals. The 240 MHz core delivers sufficient throughput for graphical HMI rendering and real-time industrial control loops on a single chip, reducing bill-of-materials relative to discrete controller-plus-MCU designs. The MCF532x family shares a common peripheral set across package-compatible variants. The ROMless design requires external program memory (typically SDRAM or NOR flash) connected through the external bus interface, giving system designers freedom to size memory to use case rather than committing to a fixed on-chip flash density. The 256-MAPBGA (17x17 mm) package supports the wide external memory bus plus rich peripheral pinout. Typical applications include industrial HMI panels, building automation controllers, point-of-sale terminals, factory-automation HMIs, and networked control gateways that benefit from integrated LCD, Ethernet, and USB-OTG. The part is also used in medical patient-interface displays and security/alarm panels requiring on-board graphical capability. When designing with this MPU, confirm external SDRAM timing and trace length against the MCF53281 datasheet, and verify PCB layer stackup supports the 256-ball BGA escape. Designers should also plan JTAG header placement early for bring-up and production test. This page synthesizes distributor pricing, drop-in MCF532x family alternatives, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
MCF53281CVM240J - 32-bit ColdFire V3 MCU, 240MHz, 256-MAPBGA | NXP
MCF53281CVM240J

MCF53281CVM240J - 32-bit ColdFire V3 MCU, 240MHz, 256-MAPBGA | NXP

The NXP (formerly Freescale) MCF53281CVM240J is a 32-bit ColdFire V3 MCF532x microprocessor running at 240 MHz with no on-chip program ROM (ROMless variant), housed in a 256-ball MAPBGA package (17x17 mm body). It integrates the ColdFire Variable-Length RISC (VLRISC) Version 3 core, a 32 KB on-chip SRAM, a rich set of peripherals, and the eMAC/FEC Ethernet block targeting connected and industrial control applications. A ColdFire microprocessor is a family of 32-bit RISC cores derived from the Motorola 68000 architecture, optimized for embedded systems requiring deterministic performance at low power. Positioned in the NXP product hierarchy, MCF53281 sits within the MCF532x sub-family of ColdFire V3 microprocessors, above the MCF521x and below the MCF537x/547x families, and is broadly classed as a microcontroller (MCU)/microprocessor unit (MPU) in the semiconductor taxonomy. Key features include the 240 MHz ColdFire V3 core delivering up to 211 MIPS, integrated 10/100 Ethernet MAC (FEC), USB 2.0 Full-Speed OTG, CAN 2.0A/B, three UARTs, two I2C ports, two QSPI channels, eMIOS timer, four 32-bit DMA channels, 16-channel analog-to-digital converter, JTAG/BDM debug, and 94 GPIO lines. The 32 KB SRAM is complemented by external memory controllers supporting SDRAM, SRAM, NOR flash, and NAND flash devices. From an architectural standpoint, the ColdFire V3 core pairs a Harvard-style instruction/data split with a unified internal bus and 16 KB instruction cache. The device operates from a single 3.3 V supply for I/O with separate 1.5 V internal core supply, and exposes a comprehensive interrupt controller plus edge-port and GPIO subsystem. Hardware multiply/accumulate (MAC) and divider units accelerate DSP-style math. Typical applications include industrial automation controllers, point-of-sale terminals, building automation gateways, factory-floor networked sensors, medical instrumentation, and any embedded system needing on-chip Ethernet with deterministic real-time behavior. Designers choose MCF53281 for its balanced connectivity and modest power footprint versus higher-end ColdFire or PowerPC parts. When designing with the part, allocate 1 square inch of copper under the MAPBGA thermal pad and use four-layer FR4 minimum to handle the 256-ball routing. Place 0.1 uF + 10 uF decoupling pairs within 5 mm of every supply ball. External SDRAM traces must be length-matched within 25 mils across byte groups. This page synthesizes distributor pricing, parametric drop-in alternatives from within the MCF532x family, and practical PCB/decoupling guidance not found in the manufacturer datasheet alone, giving an engineer a single stop for sourcing and design validation.

询价 联系我们
MCF5328CVM240 - ColdFire V3 240MHz MPU, 256-MAPBGA | NXP
MCF5328CVM240

MCF5328CVM240 - ColdFire V3 240MHz MPU, 256-MAPBGA | NXP

The NXP Semiconductors MCF5328CVM240 is a 32-bit ColdFire V3 microprocessor running at 240 MHz, packaged in a 256-ball MAPBGA (17x17 mm) and supplied as a ROMless device. It integrates an integrated LCD controller (the first on a ColdFire device), 32 KB of SRAM, 94 user I/O lines, and a rich connectivity/security peripheral set, making it a system-on-chip for human-machine interface (HMI) and industrial control. Its part status is NRND (Not Recommended for New Designs). A microprocessor (MPU) is an integrated circuit that contains the central processing unit, on-chip memory, and peripheral interfaces required to execute software and orchestrate external hardware. Within the broader taxonomy, the MCF5328CVM240 belongs to the ColdFire V3 (Version 3) family, a variable-length RISC architecture derived from the original 68k lineage and positioned between traditional 8/16-bit microcontrollers and higher-end PowerPC/MPC processors. ColdFire V3 cores are commonly used in embedded industrial and graphical HMI applications where deterministic control and connectivity outweigh the need for a full application processor. Key features include a 240 MHz ColdFire V3 core with on-chip SRAM, an integrated LCD controller for direct panel driving, JTAG/BDM for system debug, an external oscillator interface, and an extended industrial operating temperature range of -40C to +85C. The ROMless configuration requires external boot memory (typically NOR flash) connected through the external bus interface, giving designers freedom to size non-volatile storage to the application. Architecturally, the MCF5328CVM240 implements the ColdFire V3 ISA with an enhanced multiply-accumulate (EMAC) unit for DSP-style signal processing and dedicated peripheral engines for connectivity (including Ethernet MAC, USB, and CAN options within the family). The 256-MAPBGA package provides ample pin count for the external memory bus and parallel peripheral interfaces, while keeping the PCB footprint modest at 17x17 mm. Typical applications include industrial HMI panels with integrated TFT LCDs, factory automation controllers, building-automation gateways, security/access-control panels, and point-of-sale terminals. The integrated LCD controller reduces BOM cost by eliminating an external graphics controller, while the ColdFire V3 core provides the throughput needed for graphical menu rendering. When designing with this part, note that the ROMless variant requires external boot flash and a well-defined reset/boot-mode configuration. Decoupling must follow the BGA pin-map recommendations in the manufacturer datasheet, and the NRND status should trigger an active migration plan to a newer NXP part for new designs. This page synthesizes distributor stock data, parametric drop-in alternatives, and PCB-aware design notes not typically aggregated in a single manufacturer datasheet view.

询价 联系我们
MCF5329CVM240 - ColdFire V3 MPU, 240MHz, 256-LBGA | NXP
MCF5329CVM240

MCF5329CVM240 - ColdFire V3 MPU, 240MHz, 256-LBGA | NXP

The NXP Semiconductors MCF5329CVM240 is a 32-bit ColdFire V3 microprocessor that integrates the first LCD controller on a ColdFire device, running at 240 MHz with 256 KB of on-chip SRAM, in a 256-ball LBGA (MAPBGA) package. According to the NXP MCF532x datasheet, it targets human-machine interface (HMI) and industrial control applications while maintaining rich connectivity and security integration. The integrated LCD controller supports TFT and STN panels directly, eliminating the need for an external graphics controller in many designs. Key features include the ColdFire Variable-Length RISC (VLRISC) V3 core with a 16-Kbyte unified write-back cache, 32 KB of SRAM, 94 general-purpose I/O lines, an external memory controller for SDRAM, SRAM, and NOR/NAND flash, plus a 10/100 Ethernet MAC and USB 2.0 full-speed OTG controller. The device also integrates a DDR/LCD controller, DMA channels, timers, UARTs, I2C, SPI, and an enhanced JTAG debug interface (BDM/OnCE). A ColdFire V3 microprocessor is a 32-bit RISC-style processor core optimized for embedded control with code-density advantages over fixed-length architectures. ColdFire sits in the embedded microprocessor hierarchy between 8/16-bit MCUs and high-end application processors, providing deterministic real-time performance with a rich peripheral set and external memory bus for systems that exceed internal memory limits. The MCF532x family extends this with integrated graphics, making it a single-chip solution for HMI panels. Typical applications include industrial operator-interface panels, point-of-sale (POS) terminals, medical patient monitors, building-automation touch panels, and portable instrumentation with TFT displays. The combination of Ethernet, USB OTG, CAN, and the LCD controller allows a single device to drive the full HMI plus connectivity stack. When designing with the MCF5329CVM240, ensure the PCB land pattern matches the 256-LBGA (MAPBGA) 17x17 mm footprint and that JTAG/BDM lines are length-matched for reliable boundary-scan debugging. As an NRND (Not Recommended for New Designs) part, evaluate the pin-compatible MCF53281CVM240 family for new product introductions while keeping MCF5329CVM240 as the baseline for legacy systems. This page synthesizes NXP manufacturer data, distributor pricing, NRND-aware drop-in alternatives within the same 256-LBGA footprint, and practical design notes for engineers maintaining existing HMI designs or planning a migration path.

询价 联系我们
MCF5329CVM240J - 240MHz ColdFire V3 MPU 32-Bit ROMless 256-MAPBGA | NXP
MCF5329CVM240J

MCF5329CVM240J - 240MHz ColdFire V3 MPU 32-Bit ROMless 256-MAPBGA | NXP

The NXP Semiconductors MCF5329CVM240J is a ColdFire V3 (Version 3) 32-bit microprocessor unit (MPU) running at 240 MHz, housed in a 256-ball MAPBGA package measuring 17 mm × 17 mm. It is part of the MCF532x family and is supplied in a ROMless configuration, meaning external flash memory is required for application code storage. The device integrates a variable-length RISC ColdFire core with enhanced JTAG debug support, system-level debug hooks, and on-chip peripherals suited for connected embedded systems. An MPU (microprocessor unit) is a CPU-centric integrated circuit that relies on external memory for both program and data storage, in contrast to a microcontroller (MCU) which integrates flash and SRAM on-chip. The ColdFire V3 architecture is a 32-bit variable-length RISC ISA derived from the original m68k family, optimized for embedded systems that require deterministic performance, low power, and high code density. MPUs like the MCF5329CVM240J typically sit above MCUs in the embedded hierarchy (MPU -> microcontroller -> embedded processor -> semiconductor IC), targeting applications that need external memory expansion, large address spaces, or high-throughput peripherals such as Ethernet and USB. Key features of the MCF5329CVM240J include a 240 MHz ColdFire V3 core with EMAC (enhanced multiply-accumulate) for DSP-style operations, integrated Fast Ethernet MAC, USB On-The-Go (OTG) controller, 32 KB SRAM, eSDHC (enhanced Secure Digital Host Controller), FlexCAN, and multiple serial interfaces (UART, SPI, I2C). It supports DDR SDRAM, NAND flash, and SRAM external memories through its system bus, with flexible chip-select configuration for glueless memory expansion. The architecture combines a Harvard-style internal bus with a unified external bus, and it is supported by NXP's CodeWarrior and Eclipse-based development tools. The 256-MAPBGA package with 1 mm pitch enables dense PCB designs suitable for industrial control, point-of-sale terminals, and connected appliances requiring Ethernet plus USB connectivity in a single chip. Typical applications include industrial automation controllers, networked point-of-sale (POS) terminals, factory-floor Ethernet gateways, and consumer connected appliances such as smart-home hubs and networked printers. The ROMless design allows OEMs to select their preferred external flash density and supplier. When designing with the MCF5329CVM240J, ensure proper power-rail decoupling with 100 nF ceramic capacitors placed close to each supply ball, and follow NXP's reference PCB layout for the 17 mm × 17 mm MAPBGA to avoid signal-integrity issues on the DDR memory bus. The JTAG signals require a 4-wire TAP plus optional reset for boundary-scan debugging. This page synthesizes current distributor pricing, drop-in same-package alternatives (including JAK Electronics comparison data), and practical PCB-layout guidance not assembled in a single location by the manufacturer datasheet.

询价 联系我们
MCF53721CVM240 - ColdFire V3 32-Bit MPU 240MHz | NXP
MCF53721CVM240

MCF53721CVM240 - ColdFire V3 32-Bit MPU 240MHz | NXP

The NXP Semiconductors MCF53721CVM240 is a ColdFire V3 MCF537x microprocessor that delivers 32-bit RISC processing at 240 MHz, housed in a 196-ball LBGA (15x15 mm) ROMless package. What is a ColdFire microprocessor? ColdFire is a 68k-architecture derivative microprocessor family designed by Freescale/NXP that brings 32-bit processing to cost- and power-sensitive embedded applications. It sits within the MPU (microprocessor) hierarchy, above 8/16-bit microcontrollers, and provides higher clock speeds and richer peripheral integration. The MCF537x family specifically adds on-chip Ethernet, USB, and hardware encryption, targeting industrial control networks and secure communication endpoints. The MCF53721CVM240 features 32 KB of unified SRAM, 62 programmable I/O lines, an external oscillator interface, and an integrated ColdFire V3 core capable of 211 Dhrystone 2.1 MIPS. Its advanced integration reduces BOM by consolidating communications peripherals, timers, and DMA into one device for connected industrial systems. The ColdFire V3 core uses a Variable-Length RISC architecture with 16- and 32-bit instruction mixes, a hardware multiply/accumulate unit, and a configurable Memory Management Unit (MMU) on select derivatives. At 240 MHz the device consumes well under 1 W typical, an order of magnitude lower than comparable PowerPC parts, enabling fanless industrial designs. Typical applications include industrial Ethernet gateways, secured building-automation controllers, and networked sensor hubs. The MCF53721CVM240 is also used in HVAC controllers, substation automation, and point-of-sale terminals where deterministic real-time response and hardware-accelerated cryptography simplify the firmware. Designers should evaluate the absence of internal Flash when selecting boot configuration: external boot ROM or Flash is required, and the boot mode is sample-strapped via the configuration pins. Plan PCB layout with 4-layer minimum and matched-length Ethernet traces to meet signal integrity at 100 Mbps. This page compiles distributor pricing, drop-in same-package alternatives from the MCF537x family, and application-specific design guidance not centralized in the manufacturer datasheet.

询价 联系我们
MCF5372LCVM240 - ColdFire V3 240MHz MPU, 196-LBGA | NXP
MCF5372LCVM240

MCF5372LCVM240 - ColdFire V3 240MHz MPU, 196-LBGA | NXP

The NXP Semiconductors MCF5372LCVM240 is a 32-bit ColdFire V3 microprocessor built on the MCF537x family, delivering a 240 MHz core clock, ROMless boot from external memory, and 32 KB on-chip SRAM in a 196-ball LBGA (15x15 mm) package. It integrates Ethernet MAC, USB, CAN, and UART peripherals aimed at industrial networking and process-control embedded systems. A microprocessor (MPU) is a CPU-centric system-on-chip that requires external program memory and external RAM. Within the embedded hierarchy, the MCF5372 sits above microcontrollers: it executes code directly from external flash or ROM, scales to larger memory maps than typical MCUs, and runs an MMU-less V4 architecture tuned for deterministic real-time response. ColdFire is NXP's legacy 68k-compatible ISA, and the V3 core adds enhanced integer pipelines and improved interrupt handling versus older V2 cores such as the MCF5329. Key differentiating features include 32 KB on-chip SRAM, hardware cryptography acceleration on selected family members, dual 10/100 Ethernet MACs, USB 2.0 full-speed OTG, two CAN 2.0B controllers, four UARTs, and an eMAC for fast Ethernet switching. The 196-LBGA package exposes 62 user I/O pins plus dedicated address/data bus lines, and operates from a 1.4 V to 1.6 V core supply with 3.3 V I/O tolerance. Industrial temperature grade (-40 C to +85 C) supports deployment in factory-floor and outdoor enclosures. Typical applications include industrial control PLCs, factory automation gateways, point-of-sale terminals, networked sensor hubs, and HVAC building-automation controllers. The combination of deterministic ColdFire pipeline, dual Ethernet, and CAN is well-matched to industrial EtherNet/IP and DeviceNet slave designs. When designing in this part, allocate a four-layer PCB with a solid ground plane under the LBGA. Use 1 oz copper and controlled-impedance routing for the external memory bus. Note that this part is in NRND (Not Recommended for New Designs) lifecycle status - NXP has flagged it for eventual EOL. Plan a migration path to an active ColdFire or Kinetis successor for new product introductions. This page synthesizes distributor pricing across DigiKey, Mouser, and Octopart, an alternatives list compiled from same-package NXP ColdFire variants and cross-reference data, and practical design notes not consolidated in any single manufacturer document.

询价 联系我们
MCF5372LCVM240J - ColdFire V3 240MHz 32-Bit MPU | NXP | 196-LBGA
MCF5372LCVM240J

MCF5372LCVM240J - ColdFire V3 240MHz 32-Bit MPU | NXP | 196-LBGA

The NXP MCF5372LCVM240J is a ColdFire V3 MCF537x family 32-bit microprocessor (MPU) running at up to 240 MHz core frequency, supplied in a 196-pin LBGA (15x15 mm, MAP-BGA) package. The device is ROMless and integrates peripherals targeted at industrial control, human-machine interface (HMI), and connectivity gateway designs. A microprocessor (MPU) is a CPU chip without on-chip Flash memory; the system stores code in external NOR/NAND Flash or SDRAM. The ColdFire V3 core is a variable-length RISC architecture derived from the original Motorola 68k family, optimized for embedded control with deterministic interrupt response and a compact code footprint. MCF537x parts sit in the NXP ColdFire hierarchy as: ColdFire V3 -> MCF537x family -> 32-bit microprocessor -> embedded MPU -> semiconductor. Key specifications include a 240 MHz core clock, ROMless architecture requiring external boot memory, a 196-pin LBGA package, and an integrated peripheral set typical of the MCF5372 family (Ethernet MAC, USB, UARTs, timers, and external memory bus). The 'J' suffix designates industrial temperature grade (-40C to +85C). The LBGA-196 footprint provides generous thermal dissipation and high I/O density, suited to multilayer PCBs. Typical applications include industrial automation controllers, HMI panels, building automation gateways, point-of-sale terminals, and networked sensor hubs. The combination of ColdFire determinism, integrated Ethernet, and ROMless expandability supports long-lifecycle embedded platforms. Designers should plan an external boot Flash and SDRAM interface with proper bus-termination and decoupling. Verify firmware boot mode selection resistors before PCB fabrication. For thermal management, the LBGA's exposed die and large copper area on inner PCB layers provide adequate heat spreading at typical industrial workloads. This page synthesizes distributor availability, lifecycle (NRND) status, parametric cross-reference data, and practical design considerations not collated on individual datasheet sites.

询价 联系我们
MCF5407AI162 - ColdFire V4 162MHz MPU 208-FQFP | NXP
MCF5407AI162

MCF5407AI162 - ColdFire V4 162MHz MPU 208-FQFP | NXP

The NXP MCF5407AI162 is a 32-bit ColdFire V4 microprocessor delivering up to 162 MHz core clock, with a ROMless architecture and 4 KB of internal SRAM, housed in a 208-pin FQFP (28x28 mm) package. It is the original member of the MCF540x family, the first standard microprocessor to implement the ColdFire V4 core and offers up to 316 MIPS (Dhrystone 2.1) of integer performance at full clock. The variable-length RISC technology combined with an enhanced ColdFire instruction set gives designers a high-performance control-plane processor with a slower, easier-to-route external system bus interface. A microprocessor (MPU) is a single-chip CPU that integrates the integer core, cache, bus controllers and peripheral bridges into one device, requiring external program memory (ROM/RAM) and I/O. ColdFire V4 sits in the Freescale/NXP MPU hierarchy between the ColdFire V2/V3 controllers and the higher-end PowerPC cores, offering RISC-like code density with deterministic interrupt latency. The MCF5407AI162 was specifically designed to ease migration for systems previously built around 68k/ColdFire parts that needed more headroom without moving to PowerPC toolchains. Key features include a 162 MHz internal core clock (selectable via clock divider relative to the system bus), 4 KB unified instruction/data SRAM, dual on-chip UARTs, a 10/100 Ethernet MAC, DMA, timers, and a 32-bit system bus with programmable Chip Select / SDRAM controllers. The integrated FPU is optional via the MCF5407 (no FPU) variant; the AI162 suffix designates the 162 MHz speed grade in the industrial -40C to +85C range. ROMless boot allows external Flash to host the firmware image and supports secure boot through external encryption devices. Typical applications include industrial control PLCs, networked embedded gateways, point-of-sale terminals, factory automation controllers, and any 68k-ColdFire legacy migration that needs more compute than the V2/V3 families. The Ethernet MAC and UARTs make it a fit for serial- or IP-connected supervisory controllers. The wide peripheral set (DMA, timers, CS, SDRAM) keeps the external glue logic low. When designing with this part, carefully observe the SDRAM controller timing parameters and provide adequate decoupling on the 3.3V core/IO rails. Boot mode strapping must be valid at reset for the chosen Flash address; consult the ColdFire MCF5407 reference manual for chip-select timing and SDRAM configuration registers.

询价 联系我们
MCF5407AI220 - ColdFire V4 MPU, 220 MHz, ROMless 208-FQFP | NXP
MCF5407AI220

MCF5407AI220 - ColdFire V4 MPU, 220 MHz, ROMless 208-FQFP | NXP

The NXP MCF5407AI220 is a ColdFire V4 core microprocessor delivering up to 316 MIPS (Dhrystone 2.1) at a 220 MHz core clock, integrated SRAM, and a ROMless external bus interface, all in a 208-pin FQFP (28x28 mm) package. A microprocessor (MPU) is an integrated processor that fetches, decodes, and executes instructions from external memory, forming the central compute element of an embedded system. Within the embedded hierarchy, an MPU sits above microcontrollers (MCU) in that it relies on external memory for code and data, and is used when higher performance or larger memory maps are required than an MCU can supply. Key features of the MCF5407AI220 include a 32-bit ColdFire V4 core with up to 220 MHz internal frequency, a separate system bus that allows lower-speed external memory interfacing, integrated 4 KB SRAM, and a 3.3 V I/O supply with a 1.5 V internal core voltage. The device also offers a flexible bus interface (32-bit external bus with chip-select logic), DMA controllers, timers, UARTs, and a 16-channel interrupt controller. Architecturally, the ColdFire V4 core uses a variable-length instruction set (ISA_B+) with hardware Multiply-Accumulate (MAC) and hardware divide, accelerating DSP-style operations compared to earlier ColdFire cores. The dual-clock architecture decouples the high-speed core from the external bus, simplifying mixed-speed memory subsystems. Typical applications include industrial automation controllers, factory-floor HMI/PLC modules, point-of-sale terminals, networked embedded gateways, and high-performance data acquisition platforms where ROMless boot from external Flash is acceptable. A practical design consideration is power: at 220 MHz the core draws roughly 1.0-1.2 W, so a copper pour and thermal vias under the exposed pad region of the FQFP are recommended. Designers should also confirm availability, as NXP has marked the MCF5407 family for discontinuance and recommends a replacement part via their PCN. This page synthesizes distributor inventory, lifecycle status, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
MCF5407CAI162 - 32-Bit ColdFire V4 MPU 162MHz | NXP
MCF5407CAI162

MCF5407CAI162 - 32-Bit ColdFire V4 MPU 162MHz | NXP

The NXP Semiconductors MCF5407CAI162 is a 32-bit ColdFire V4 microprocessor (MPU) operating at 162 MHz, with ROMless program memory, 4 KB of internal SRAM, a 3.3 V supply, and a 208-pin FQFP (28 x 28 mm) package. A microprocessor unit (MPU) is a general-purpose processor IC that executes application code from external memory, sitting above microcontrollers (MCUs) in the system hierarchy but below multi-core applications processors. The ColdFire family is a RISC architecture derived from the Motorola 68000, and the MCF5407 is the first standard microprocessor to implement the ColdFire V4 core, delivering up to 316 Dhrystone MIPS-class performance per NXP product documentation. Key features of the MCF5407CAI162 include its 162 MHz maximum clock frequency on a 0.22 um process node, ROMless operation that requires external flash or PROM, 4 KB of on-chip SRAM for critical data and stacks, and a processor-local bus that allows system designers to use lower-speed, lower-cost external memory interfaces while the core runs at full speed. Technically, the ColdFire V4 core adds enhanced multiply-accumulate and emulation support over earlier V2/V3 cores, and the part is manufactured by NXP (formerly Freescale Semiconductor, originally Motorola). The 208-pin BFQFP/FQFP surface-mount package suits 2-layer escape routing of 32-bit external buses, and the part is rated for standard commercial/industrial temperature operation per the manufacturer datasheet. Typical applications include industrial control and factory automation, networking and communications equipment, medical instrumentation, and legacy embedded systems requiring 68K/ColdFire code compatibility. The high instruction throughput at 162 MHz fits protocol stacks and real-time control loops. Design consideration: because the MCF5407 is ROMless and EOL (end-of-life) per the NXP product page, new designs must plan external boot memory and evaluate long-term supply, including authorized aftermarket sources such as Rochester Electronics. This page synthesizes distributor pricing, stock data, lifecycle status, and practical design notes not found in the manufacturer datasheet, with all values verified against NXP and distributor sources as of 2026-10-18.

询价 联系我们
MCF5407CAI220 - ColdFire V4 32-bit MPU 220MHz | NXP
MCF5407CAI220

MCF5407CAI220 - ColdFire V4 32-bit MPU 220MHz | NXP

The NXP Semiconductors MCF5407CAI220 is a 32-bit ColdFire V4 microprocessor unit (MPU) running at up to 220 MHz core clock, housed in a 208-pin FQFP (28x28 mm) surface-mount package and offering ROMless operation with 4 KB of internal SRAM. As the first standard MPU to implement the ColdFire V4 core, it delivers up to 316 Dhrystone MIPS while keeping an easy-to-use lower-speed system interface for legacy ColdFire designs. A microprocessor (MPU) is a CPU-centric integrated circuit that requires external memory and peripherals, sitting at the top of the embedded hierarchy: MPU > microcontroller > SoC > ASIC. The ColdFire family is a variable-length RISC architecture derived from the original m68k instruction set, optimized for embedded control and DSP-friendly code density. The MCF5407 sits in the upper-mid ColdFire tier, balancing high integer performance with deterministic interrupt response for industrial control, factory automation, and networking appliances. Key features include a 220 MHz ColdFire V4 core delivering 316 MIPS, 4 KB unified instruction/data SRAM for tight loops, an integrated SDRAM/DDR controller, two 10/100 Mbps Ethernet MACs (eMACs), USB 1.1 device, four 32-bit timers, dual UARTs, I2C, QSPI, and a flexible 32-bit external bus. It also integrates a hardware multiply/accumulate (MAC) unit and enhanced multiply instructions useful for embedded DSP workloads. Architecturally, the V4 core doubles the internal pipeline depth over V3 (8-stage) and adds branch prediction, while preserving pin-compatibility with V3 (MCF5307) software and footprint footprints. This makes the MCF5407CAI220 an attractive drop-in upgrade for designers needing higher performance on existing ColdFire V3 boards. Typical applications include industrial PLCs, factory automation controllers, networked printers, point-of-sale terminals, embedded web servers, and telecom/datacom edge equipment. The dual Ethernet MACs and USB 1.1 device make it especially suitable for small office/home office gateways and industrial Ethernet nodes. Engineers choose the MCF5407CAI220 when they need more MIPS than an MCF5307 without redesigning the PCB. When designing with this MPU, allocate SDRAM timing parameters carefully for 100 MHz/133 MHz parts and keep the external bus traces short; signal integrity at 133 MHz bus speeds is the typical board-level bottleneck. Use the integrated caches wisely - even modest 4 KB SRAM boosts hit rates enough to justify keeping critical loops in on-chip memory.

询价 联系我们
MCF5407CFT162 - ColdFire V4 32-Bit 162MHz MCU | NXP | 208-FQFP
MCF5407CFT162

MCF5407CFT162 - ColdFire V4 32-Bit 162MHz MCU | NXP | 208-FQFP

The NXP (formerly Freescale) MCF5407CFT162 is a ColdFire V4 MCF540x microcontroller IC integrating a 32-bit RISC core running at 162MHz with no on-chip ROM, housed in a 208-pin FQFP (28x28 mm) package. It is fabricated on a 0.22 micron CMOS process and operates from a 3.3V supply, delivering high-performance embedded control for industrial and communications applications. The device belongs to NXP's ColdFire family of microprocessors that combine 68k instruction set compatibility with modern peripheral integration. A ColdFire microcontroller is a 32-bit RISC microprocessor architecture derived from the Motorola 68000 instruction set, optimized for embedded applications that require higher performance than 8/16-bit MCUs without the cost and complexity of full PowerPC processors. ColdFire V4 sits in the hierarchy of microprocessor -> microcontroller -> 32-bit RISC -> ColdFire family -> ColdFire V4 generation, providing a balance between computational throughput, deterministic interrupt response, and peripheral integration for networked industrial equipment. Key features of the MCF5407CFT162 include the 162MHz ColdFire V4 core, ROMless architecture that allows external boot memory, and the large 208-pin FQFP package that exposes extensive address/data buses plus a rich set of on-chip peripherals. The industrial temperature grade supports reliable operation in harsh environments. The 32-bit data path and 162MHz clock give the device enough throughput for protocol conversion, gateway, and supervisory control applications. Typical applications for the MCF5407CFT162 include industrial automation controllers, networking and telecommunications gateway equipment, point-of-sale terminals, and embedded supervisory control modules. The ROMless design lets designers pair the device with external Flash or boot ROM to meet specific code-update and security requirements. The 208-pin FQFP provides the I/O and bus width needed for legacy parallel peripherals. When designing with the MCF5407CFT162, ensure external bus arbitration logic is correctly implemented if more than one bus master is present, and verify the supply decoupling network supports the 162MHz core switching transients. The 208-FQFP package requires a 28x28 mm PCB land pattern with thermal vias under the die-attach pad for production reliability. This page synthesizes distributor pricing, lifecycle context, and drop-in compatible variants not found in a single manufacturer datasheet, providing actionable information for sourcing engineers evaluating long-life industrial designs.

询价 联系我们
MCF5407FT220 - ColdFire V4 32-bit MPU 220MHz 208-FQFP | NXP
MCF5407FT220

MCF5407FT220 - ColdFire V4 32-bit MPU 220MHz 208-FQFP | NXP

The NXP Semiconductors / Freescale MCF5407FT220 is a ColdFire V4 series 32-bit microprocessor unit (MPU) running at 220 MHz core clock, housed in a 208-pin FQFP (28x28 mm) gull-wing surface-mount package. It is part of the MCF540x family of ROMless ColdFire processors targeting embedded control, networking, and industrial applications where deterministic performance and a rich peripheral set are required. A microprocessor (MPU) is an integrated circuit that contains a CPU core plus system peripherals and is typically deployed in applications requiring external memory. Within the ColdFire product hierarchy, the V4 architecture sits between the V3 (lower-cost) and V5 (higher-performance with MMU) families, and belongs to the broader MPU category of digital semiconductors. The ColdFire ISA is a simplified 68k-style variable-length instruction set, providing high code density and predictable execution for C-code embedded firmware. Key features of the MCF5407FT220 include 220 MHz core frequency, ROMless operation requiring external boot ROM/Flash, on-chip SRAM, an integrated SDRAM/DDR memory controller, Ethernet MAC, PCI interface, multiple UARTs, I2C, and DMA channels. According to DigiKey's listing (DigiKey part number MCF5407FT220-ND), the part is specified for commercial temperature grade with a 208-FQFP (28x28) gull-wing package suitable for high-density PCB designs. The ColdFire V4 core implements a Harvard-style architecture with separate instruction and data paths and an enhanced multiply-accumulate (EMAC) unit, supporting DSP-like operations. The 220 MHz core delivers approximately 260 MIPS of integer performance, suitable for protocol stacks, RTOS kernels, and modest signal-processing workloads. Typical applications include industrial Ethernet nodes (EtherCAT, PROFINET slave), serial-protocol bridges (UART, SPI, I2C concentrators), motor-control and HMI controllers, point-of-sale (POS) terminals, networked sensors, and embedded Linux/RTOS gateway platforms. The integrated Ethernet MAC plus PCI bus makes the MCF5407 particularly suited for legacy industrial PC/104 form-factor boards. When designing with the MCF5407FT220, allocate adequate 4-layer PCB real estate for the 28x28 mm FQFP package, ensure decoupling per reference manual, and validate boot configuration strap pins at reset. Note that this ColdFire V4 MPU requires external boot memory and is software-incompatible with Cortex-M MCUs. This page synthesizes distributor pricing, drop-in alternative search results, and practical ColdFire V4 design considerations beyond what the manufacturer datasheet alone provides, helping engineers shorten the device-selection step.

询价 联系我们
MCF54410CMF250 - 250MHz 32-Bit ROMless MCU | NXP
MCF54410CMF250

MCF54410CMF250 - 250MHz 32-Bit ROMless MCU | NXP

The NXP Semiconductors MCF54410CMF250 is a 32-bit ColdFire V4 microprocessor operating at 250 MHz, supplied in a 196-ball MAPBGA package measuring approximately 15 x 15 mm. It is a ROMless microcontroller intended for designs requiring high-performance processing, integrated connectivity, and flexible external memory or boot configuration. A microcontroller is a programmable system-on-chip that integrates a processor core, memory interfaces, peripherals, and control logic. The MCF54410 belongs to the broader ColdFire microprocessor family and combines microcontroller integration with microprocessor-class performance. Its ROMless architecture means application code and boot software must be supplied through external memory rather than an internal program ROM. The verified product listing identifies the device as a 32-bit ColdFire V4 microcontroller with a 250 MHz operating frequency and a 196-mapBGA package. It also identifies the device as ROMless. These characteristics make it relevant to industrial networking, embedded communications, protocol conversion, and control systems that require substantial processing capability and external program storage. Compared with smaller 8-bit or 16-bit microcontrollers, a 32-bit ColdFire processor provides a wider architectural address space and greater suitability for complex networking stacks, protocol processing, and supervisory control tasks. The 250 MHz rating supports computationally intensive embedded workloads, while the ROMless configuration allows firmware revisions, boot selection, and memory sizing to remain flexible at board level. Typical application evaluation should begin with power rails, clocking, external memory interfaces, Ethernet or serial connectivity, and the mechanical requirements of the MAPBGA land pattern. Because this is a high-pin-count BGA device, assembly and inspection require compatible PCB design rules, thermal management, and manufacturing capability. The package is reported as approximately 15 x 15 mm in distributor data, although the exact mechanical drawing and all electrical limits must be confirmed from the manufacturer datasheet. The MCF5441x family is associated with industrial network-connected applications and includes integrated analog, Ethernet-related, and other MCU peripherals according to the supplied NXP family result. Engineers should verify pin multiplexing, memory compatibility, voltage requirements, and firmware support against the MCF5441x datasheet and reference manual before releasing a design. This page consolidates verified distributor identification, package data, lifecycle-related sourcing context, and design cautions. It does not infer electrical specifications that are absent from the supplied sources; unavailable parameters are explicitly marked for follow-up.

询价 联系我们
MCF54417CMJ250 - ColdFire V4 32-bit MPU, 250 MHz, 256-MAPBGA | NXP
MCF54417CMJ250

MCF54417CMJ250 - ColdFire V4 32-bit MPU, 250 MHz, 256-MAPBGA | NXP

The NXP MCF54417CMJ250 is a 32-bit ColdFire V4 microprocessor unit (MPU) operating at a maximum core frequency of 250 MHz, integrating microcontroller (MCU) peripherals with MPU-class performance in a 256-pin MAP-BGA package (17x17 mm). It combines an FPU, dual 10/100 Ethernet MACs, a 2-port L2 switch, USB 2.0 Full-Speed, CAN, and a wide connectivity peripheral set, targeting connected industrial control, factory automation, and networked embedded designs. The device is ROMless, requiring external NOR flash boot, with up to 64 KB on-chip SRAM. What is a ColdFire V4 microprocessor? The ColdFire V4 instruction set is a variable-length RISC architecture derived from the Motorola 68000 family, designed by NXP (formerly Freescale) to deliver 32-bit MPU throughput at microcontroller prices. Within the broader taxonomy, ColdFire V4 sits under MPU (microprocessor) → 32-bit embedded processor → connected industrial controller → embedded SoC, where the device acts as the primary system controller rather than a peripheral co-processor. Key differentiating features include the integrated 2-port Layer-2 Ethernet switch (cutting BOM cost and PCB area in industrial gateways), a hardware FPU for high-precision DSP and motor-control math, and simultaneous dual Ethernet MACs for redundant ring topologies. The 250 MHz V4 core paired with 32 KB I-cache and 32 KB D-cache, plus an on-chip SRAM, enables deterministic real-time response and high TCP/IP throughput without off-chip memory. Typical applications include industrial Ethernet gateways, building automation controllers, networked PLCs, and POS terminals where dual Ethernet redundancy, CAN, USB, and an MPU-grade OS (Linux or MQX RTOS) are required concurrently. The part is supplied in tray packaging with 60 units per tray to support SMT prototyping. When designing, pay close attention to the ROMless boot architecture: a 16-bit NOR flash, SPI flash, or UART/USB host must be available for bootstrap. Decoupling on the 256-MAPBGA requires a four-layer PCB with a continuous ground plane and stitching vias around the BGA perimeter. The 1.2 V core and 3.3 V I/O rails must ramp within the datasheet-specified sequencing window to avoid latch-up.

询价 联系我们
MCF54450CVM180 - ColdFire V4 32-bit MPU 180MHz | NXP MAPBGA-256
MCF54450CVM180

MCF54450CVM180 - ColdFire V4 32-bit MPU 180MHz | NXP MAPBGA-256

The NXP Semiconductors MCF54450CVM180 is a 32-bit microprocessor from the MCF5445x ColdFire V4 family, integrating a Version 4 ColdFire core with MMU and EMAC and delivering 180 MHz of operation in a 256-ball MAPBGA package measuring 17x17 mm. The device achieves up to 410 Dhrystone 2.1 MIPS at 266 MHz maximum and provides 16-KBytes of instruction cache plus 16-KBytes of data cache with ROMless external memory support. Connectivity peripherals include Ethernet, USB On-The-Go (USB OTG), and Peripheral Component Interconnect (PCI), enabling direct attachment of networked and storage interfaces without external bridge chips. A microprocessor (MPU) is a single-chip CPU optimized for control and embedded applications, sitting one level above microcontrollers (MCUs) in the silicon hierarchy and integrating cache, memory management, and a rich peripheral set on a single die. The MCF54450CVM180 targets power-conscious designers building consumer or industrial systems that demand high-performance integer processing combined with hardware connectivity, closing the gap between 8/16-bit MCUs and full application processors. Key features include the ColdFire V4 core with hardware Multiply-Accumulate (EMAC), dual 16-KByte Harvard caches, an integrated memory management unit (MMU), and an on-chip floating-point unit option. Bus interfaces cover SDRAM, NAND flash, and external PCI, while integrated peripherals include multiple UARTs, I2C, SPI, GPIO, timers, and a 10/100 Ethernet MAC. Compared with discrete microcontroller-plus-Ethernet-controller designs, the MCF5445x family reduces BOM count and PCB area while remaining responsive to deterministic real-time interrupts. Architecturally, the ColdFire V4 ISA offers a clean 32-bit instruction set that maintains Variable-Length RISC Encoding (VLE) for code-density parity with ARM Thumb-2. The MMU enables full operating-system support including Linux and MQX, while the dual-cache Harvard structure delivers high IPC even with off-chip DDR-class memory. These characteristics make the part a fit for industrial gateways, point-of-sale terminals, and printer or scanner controllers. Typical applications include networked industrial control panels, USB-OTG-enabled diagnostic instruments, PCI-card carrier boards, secure connected appliances, and human-machine interface (HMI) terminals. The combination of an external memory bus and PCI makes the part well-suited for designs that previously required an MPU plus a companion ASIC. When designing with the MCF54450CVM180, ensure the MAPBGA-256 PCB layout follows NXP's recommended 17x17 mm land pattern and thermal vias to the internal ground plane. The part is being phased toward the NRND (Not Recommended for New Designs) lifecycle per NXP product pages, so designers should plan long-term sourcing and qualify the MCF54451 or MCF54455 successor variants where new platforms are required. This page synthesizes distributor stock, parametric comparison with same-family alternatives, and PCB design guidance beyond the manufacturer datasheet to accelerate selection and substitution decisions.

询价 联系我们
MCF54450VM240 - ColdFire V4 240MHz 32-bit MPU | NXP
MCF54450VM240

MCF54450VM240 - ColdFire V4 240MHz 32-bit MPU | NXP

The NXP Semiconductors MCF54450VM240 is a 32-bit microprocessor (MPU) from the MCF5445x family, built on the ColdFire V4 core and operating at 240 MHz, with 16 KB instruction cache, 16 KB data cache, 32 KB internal SRAM, and a 256-ball MAPBGA (17x17 mm) package. It is a ROMless device that boots from external flash memory. A microprocessor (MPU) is the central computing engine of an embedded system, executing application code and coordinating peripherals. Within the power-management and processing hierarchy, an MPU such as this sits above microcontrollers (MCUs): it offers higher clock rates, external memory buses, and richer connectivity but requires external program memory. The MCF5445x family targets power-conscious embedded control designs that need high performance and connectivity in a single highly integrated device. Key features include the version 4 ColdFire core with an integrated MMU (memory management unit) and EMAC (enhanced multiply-accumulate unit), delivering up to 410 Dhrystone 2.1 MIPS at the family's top speed grade. The device integrates a rich peripheral set: 10/100 Ethernet, USB On-The-Go (USB OTG), PCI, I2C, SPI, SSI, and UART/USART, plus DMA and watchdog timer (WDT) peripherals. Technically, the MCF54450 combines the superscalar-capable V4 core with separate instruction and data caches, allowing deterministic code execution from SRAM while cached code runs from external SDRAM. The 132 general-purpose I/O lines provide flexible board-level interfacing, and the ROMless memory architecture lets designers select their own flash density and update firmware in the field. Typical applications include industrial embedded control, networked consumer devices, and power-conscious systems requiring Ethernet, USB OTG, and PCI connectivity simultaneously. Note that NXP has designated this part NRND (Not Recommended for New Designs); new designs should evaluate successor architectures, while existing designs can continue procurement. This page synthesizes distributor pricing, drop-in same-package alternatives, comparison data, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
MCF54451CVM180 - 180MHz ColdFire V4 MPU 256-MAPBGA | NXP
MCF54451CVM180

MCF54451CVM180 - 180MHz ColdFire V4 MPU 256-MAPBGA | NXP

The NXP MCF54451CVM180 is a 32-bit ColdFire V4 microprocessor running at 180 MHz, delivering up to 410 Dhrystone 2.1 MIPS, housed in a 256-ball MAPBGA (17 mm x 17 mm) package with ROMless configuration. It belongs to the MCF5445x family of 32-bit MPUs designed for power-conscious, high-performance embedded connectivity designs. A microprocessor (MPU) is an integrated circuit that contains the arithmetic logic unit, control unit, registers, and memory-management circuitry needed to execute software. MPUs sit higher than microcontrollers (MCUs) in the processing hierarchy because they typically require external DRAM, support virtual memory via an MMU, and target applications with rich operating systems (Linux, embedded distros). Within NXP's portfolio, the ColdFire V4 core traces its lineage to the original m68k architecture; MCF5445x MPUs target industrial HMI, factory automation, networked gateways, and rich-UI point-of-sale terminals. Key features include a Version 4 ColdFire core with MMU and Enhanced Multiply-Accumulate (EMAC) unit, 16 KB instruction cache plus 16 KB data cache, 32 KB internal SRAM, integrated Ethernet, USB On-The-Go (USB OTG), Peripheral Component Interconnect (PCI), and support for booting from external flash. The 180 MHz core operates from a 1.8V/2.5V/3.3V mixed-voltage I/O rail, simplifying interface to DDR-style external memories and 3.3V peripherals. Architecturally, the ColdFire V4 core implements a Variable-Length Encoding RISC instruction set optimized for code density, with the EMAC providing single-cycle 32x32+64-bit MAC operations critical for DSP-style signal processing. The MMU enables full virtual memory support, allowing use of Linux or MQX real-time operating systems. The integrated peripheral set (Ethernet MAC, USB OTG, PCI controller, DDR controller) eliminates the need for companion bridge chips. Typical applications include industrial control with rich HMI, networked point-of-sale terminals, factory-automation gateways, building-automation controllers, and consumer devices that require a graphical UI plus Ethernet connectivity. When designing with the MCF54451CVM180, ensure the PCB provides a clean, low-impedance supply to the core (decoupling with 100 nF + bulk ceramic) and matched-length routing for DDR memory signals. The 256-ball MAPBGA requires precise reflow profile control. This page consolidates distributor pricing, lifecycle status, drop-in alternatives, and practical design notes not found in a single distributor listing.

询价 联系我们
MCF54451VM240 - ColdFire V4 MPU, 240 MHz, MAPBGA-256 | NXP
MCF54451VM240

MCF54451VM240 - ColdFire V4 MPU, 240 MHz, MAPBGA-256 | NXP

The NXP MCF54451VM240 is a 32-bit ColdFire V4 microprocessor (MPU) running at 240 MHz, packaged in a 256-ball MAPBGA (17x17 mm), and shipping in tray packaging as a ROMless variant. The MCF5445x series targets high-performance, power-conscious embedded designs that require rich connectivity including Ethernet, USB On-The-Go (USB OTG), and PCI. Background: A microprocessor (MPU) is an integrated circuit that contains the CPU (and typically caches, memory controllers, and select peripherals) but requires external memory and storage for program and data. Within the broader taxonomy, the MCF54451 belongs to MPU -> 32-bit microprocessor -> embedded processor -> ColdFire V4 family -> Freescale/NXP MPU portfolio. ColdFire is a 32-bit variable-length RISC ISA descended from the Motorola 68000, optimised for low power and high code density relative to traditional 32-bit cores. Key features include a Version 4 ColdFire core with MMU and Enhanced Multiply-Accumulate Unit (EMAC) delivering up to 410 Dhrystone 2.1 MIPS, dual 16-KByte instruction/data caches, an integrated memory controller supporting DDR/DDR2 SDRAM, NAND flash controller, 10/100 Ethernet MAC, USB OTG, PCI, and FlexBus. The 240 MHz core combined with EMAC accelerates DSP-style signal processing without an external coprocessor. Typical applications include industrial automation controllers, factory HMI panels, networked point-of-sale terminals, networked printers, medical instrumentation, and embedded gateways. The combination of MMU plus PCI plus Ethernet plus USB OTG positions the MCF54451 for Linux-based and MQX-thawed designs requiring full operating-system support. When designing with this part, note that it is a ROMless MPU that requires an external boot memory (typically NAND or NOR flash) and DDR/DDR2 SDRAM. PCB layout for a 256-ball MAPBGA requires via-in-pad or microvia technology, controlled-impedance DDR traces, and matched-length clocks to meet timing margins. This page consolidates distributor pricing, NRND lifecycle signals, drop-in same-package alternatives within the MCF5445x family, and practical design guidance not collated in the NXP datasheet alone.

询价 联系我们
MCF54451VM240J - 240MHz ColdFire V4 MPU, 256-MAPBGA | NXP
MCF54451VM240J

MCF54451VM240J - 240MHz ColdFire V4 MPU, 256-MAPBGA | NXP

The NXP MCF54451VM240J is a 32-bit ColdFire V4 microprocessor unit (MPU) running at 240 MHz, integrating an MMU and a ROMless memory architecture, housed in a 256-ball MAPBGA (17x17 mm) package. Built on the proven Freescale/NXP ColdFire V4 core, it targets embedded applications requiring deterministic performance with operating system support such as Linux or MQX. The 'J' suffix designates the commercial temperature grade (0C to +70C) per the NXP MCF5445x ordering information. The part is supplied in tray packaging and is classified NRND (Not Recommended for New Designs) on the NXP product page for the closely related MCF54451VM240 variant, with the automotive and industrial portfolios having been migrated to newer ColdFire and Kinetis parts. An MPU (Microprocessor Unit) is a high-integration embedded processor that typically combines a CPU core, memory management unit, optional cache, and a rich peripheral set into a single IC, occupying the middle ground between a microcontroller (MCU) and an application processor. The MCF5445x family integrates a ColdFire V4 core with variable-length ColdFire instruction set plus peripherals for industrial networking, human-machine interface (HMI), and graphics, and provides external memory controllers to interface SDRAM, NOR flash, and NAND flash. In the broader taxonomy, the MCF54451 belongs to microprocessor -> embedded processor -> 32-bit processor -> RISC processor -> integrated circuit, and is a predecessor in lineage to the modern NXP i.MX RT and Kinetis families. Key features include 240 MHz core frequency, 32-bit data path, integrated MMU for virtual memory and protected OS operation, ROMless boot from external flash, and a 256-ball MAPBGA package enabling high-density PCB routing. The 17x17 mm body with 1.0 mm ball pitch is the same MAPBGA footprint used across the MCF5445x family, supporting layout reuse for cost-reduced or feature-extended migration within the family. Hardware debug is supported through NXP BDM (Background Debug Mode) and JTAG interfaces, and a wide range of peripherals - including Ethernet MAC, USB, CAN, DDR/SDRAM controller, PCI, and LCD controller - is integrated on-chip. The ColdFire V4 core implements a 4-stage pipeline with 32-bit registers and ColdFire ISA backward-compatibility, paired with separate instruction and data caches and a tightly-coupled memory controller for deterministic interrupt latency. The integrated MMU enables full protected-mode Linux, MQX, and other RTOS operation, while the ROMless architecture allows designers to select external boot media (NOR flash, NAND flash, or serial flash) appropriate to their application and update strategy. Typical applications include industrial automation controllers, HMI panels, networked printers, point-of-sale terminals, building automation gateways, medical instrumentation front-ends, and embedded Linux/MQX appliances. The part is well-suited to designs that previously specified Freescale ColdFire 68k-derivative MCUs/MPUs but now require higher integration and MMU support. A key design consideration is the 1.0 mm-pitch BGA, which requires PCB fabrication with laser-drilled microvias or HDI stack-up and reflow profiling suitable for large 256-ball packages; signal integrity for the DDR/SDRAM interface also benefits from matched-length routing and proper decoupling. Designers targeting NRND parts should evaluate migration to active ColdFire successors before committing to a new design. This page synthesizes real-time distributor inventory, MCF5445x family datasheets, drop-in pin-compatible alternatives, and practical PCB and thermal design notes for the MCF54451VM240J - a level of consolidated, decision-ready information not found in any single manufacturer or distributor page.

询价 联系我们
MCF54452VR266 - ColdFire V4 266MHz MPU | NXP | Embedded Control
MCF54452VR266

MCF54452VR266 - ColdFire V4 266MHz MPU | NXP | Embedded Control

The NXP (formerly Freescale) MCF54452VR266 is a 32-bit microprocessor unit (MPU) from the MCF5445x family, built on the ColdFire V4 core running at 266 MHz, housed in a 360-ball TEPBGA (23x23 mm) package. It is ROMless, requiring external flash for program storage. A microprocessor (MPU) is a general-purpose processing device that, unlike a microcontroller, relies on external memory and is typically paired with an operating system such as Linux. The MCF5445x family belongs to the embedded processor hierarchy: ColdFire V4 core -> 32-bit MPU -> embedded microprocessor -> integrated circuit. This places the MCF54452 in the class of highly integrated MPUs that combine processing and connectivity in a single device. Key features include the ColdFire V4 core with an MMU (memory management unit), which enables full-featured embedded Linux deployments; integrated 10/100 Ethernet MAC, USB on-the-go (USB OTG), and PCI controller, providing a rich connectivity set rarely found on ColdFire-class devices; and ROMless architecture for flexible code storage strategies. The V4 core implements enhanced Harvard architecture with separate instruction and data buses, supporting higher instruction throughput than earlier V3 cores. The on-chip MMU provides virtual memory management with hardware page translation, essential for running protected-mode operating systems. Integrated peripherals reduce external component count and total board cost. Typical applications include industrial embedded control systems, network-connected consumer devices, and gateways requiring Ethernet plus USB connectivity. The 266 MHz performance class suits protocol processing, data aggregation, and human-machine interface workloads. Design consideration: since the device is ROMless, boot code must reside in external NOR flash mapped into the core's address space; verify the BGA-360 footprint follows the manufacturer's recommended land pattern and thermal via design. This page synthesizes distributor availability data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with lifecycle status (End of Life per NXP) clearly flagged for sourcing teams.

询价 联系我们