INA111BU vs INA114BU 对比
详细并排对比 INA111BU 出自 Texas Instruments 和 INA114BU 出自 Texas Instruments。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况,以确定最适合您设计需求的元器件。
Texas Instruments
INA111BU - 2 MHz FET-Input Instrumentation Amplifier | Texas Instruments
INA111BU ✓ 量产中规格对比
| 参数 | INA111BU | INA114BU |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 分类 | Amplifier ICs | Amplifier ICs |
| 生命周期状态 | 有效 | 有效 |
| Product Type | Instrumentation amplifier | Low-cost, general-purpose precision instrumentation amplifier |
| Number of Amplifiers | 1 circuit | — |
| Input Transistor Type | FET-input | — |
| Gain-Bandwidth Product | 2 MHz | 1 MHz |
| Slew Rate | 17 V/us | 0.06 V/µs |
| Common-Mode Rejection Ratio | 106 dB | — |
| Input Bias Current | Less than 20 pA | — |
| Supply Voltage Range | 6 V to 18 V | 2.25 V to 18 V |
| Maximum Supply Voltage | 18 V | — |
| 工作温度范围 | -40 C to +85 C | -40°C to +85°C |
| 封装 | 16-pin SOIC | 16-pin SOIC |
| 安装类型 | Surface mount | Surface mount |
| Input Protection | [DATA_NEEDED: input protection rating] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 50 uV |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Gain Range | [DATA_NEEDED: gain range] | 1 to 10,000 |
| Gain-Setting Resistor | [DATA_NEEDED: gain-setting resistor] | — |
| 静态电流 | [DATA_NEEDED: quiescent current] | — |
| 噪声密度 | [DATA_NEEDED: noise density] | — |
| RoHS 状态 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | Not applicable | — |
| Amplifier Type | — | Precision instrumentation amplifier |
| Architecture | — | Three-op-amp design |
| Number of Circuits | — | 1 circuit |
| Input Noise Density | — | 11 nV/√Hz |
| Typical Supply Current | — | 3 mA |
| Gain-Setting Method | — | One external resistor |
| Input Protection Range | — | ±40 V |
| Settling Time | — | 600 ns |