10CL080YF780C8G - Cyclone 10 LP FPGA, 81K LE, 780-BGA | Intel
料号： 10CL080YF780C8G ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $95 | $95.00 |
| 10 | $88.5 | $885.00 |
| 100 | $79.2 | $7,920.00 |
| 500 | $71.4 | $35,700.00 |
| 1,000 | $64.1 | $64,100.00 |
10CL080YF780C8G 概述
A Cyclone 10 LP FPGA is a reprogrammable logic device that combines configurable logic blocks, embedded memory arrays, embedded multiplier/DSP blocks, and high-speed transceivers in a single chip. Cyclone 10 LP sits within Intel's broader FPGA taxonomy (Cyclone -> low-cost FPGA family -> programmable logic device -> semiconductor) and is designed as the cost-optimized successor to Cyclone IV/ Cyclone V devices for I/O expansion, bridging, motor control, and industrial video applications.
Key features include up to 423 user I/O pins, support for LVDS, LVCMOS, SSTL, and HSTL I/O standards, dedicated 18x18 multiplier blocks for DSP, embedded M9K memory blocks totaling 2.8 Mbits, and four general-purpose PLLs per device. Configuration is supported through passive serial (PS), fast passive parallel (FPP), and JTAG modes, with on-chip flash for Cyclone 10 LP configuration image storage. The C8 speed grade indicates a moderate performance bin suitable for industrial temperature ranges.
The architecture combines a fine-grained logic fabric with hard DSP and memory blocks, enabling efficient implementation of parallel processing pipelines, video bridging, and motor-control loops. Cyclone 10 LP devices are designed in Intel's Quartus Prime design suite with IP libraries for DDR3 memory controllers, Ethernet MACs, and Nios II embedded processors.
Typical applications include industrial machine vision, motor and motion control, factory automation I/O expansion, video bridging and protocol conversion, and cost-sensitive telecommunications line cards. The 780-BGA package provides ample I/O for high-pin-count bridging designs.
When designing with this device, ensure the Quartus Prime pin-out assignments are validated against the F780 ball-map before PCB fab. DDR3 interfaces require DQS delay-line calibration, and the four PLLs should be assigned early in the floorplan to avoid routing congestion.
This page synthesizes distributor pricing, same-brand Cyclone 10 LP drop-in alternatives in the F780 footprint, and practical Quartus design notes not consolidated in the manufacturer datasheet alone.
直接替换替代料： 10CL080YF780C8G ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： 10CL080YF780C8G （相同外形与封装尺寸） ——差异在于 Package, Process Technology, Configuration Modes, Operating Temperature, Speed Grade.
快速对比工具——选择替代料号进行并排对比：
10CL080YF780C6G
✅ 直接替换✓ 有现货
$125.8 / 个
查看数据手册 →10CL080YF780I7G
✅ 直接替换✓ 有现货
$198 / 个
查看数据手册 →10CL080YF780C7G
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
10CL080YU484I7G
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$152 / 个
查看数据手册 →10CL080YF780C8G 最大额定值与电气特性
| Family | Cyclone 10 LP |
| Logic Elements (LE) | 81,264 |
| Embedded Memory (bits) | 2,810,880 |
| Embedded Memory Blocks | M9K |
| 18x18 Multipliers | 423 |
| Maximum User I/O | 423 |
| PLLs | 4 |
| Global Clock Networks | 20 |
| Process Technology | TSMC 60 nm low-power |
| Speed Grade | C8 (commercial, 8 ns) |
| 工作温度 | 0C to +85C (commercial) |
| 封装 | 780-ball FineLine BGA (F780) |
| 安装类型 | Surface Mount (BGA) |
| Configuration Mode | PS / FPP / JTAG |
| Configuration Memory | External (or on-chip flash via EPCQ) |
| Design Tool | Intel Quartus Prime (Lite / Standard / Pro) |
| RoHS 状态 | Compliant |
10CL080YF780C8G 引脚配置
| 引脚 A1 | IO — General-purpose user I/O (bank 8) |
| 引脚 B2 | VCCIO_8 — I/O bank 8 voltage supply (1.2-3.3V) |
| 引脚 D5 | GND — Ground |
| 引脚 F12 | DIFFIO_RX_T0p — Differential RX positive, true LVDS pair 0 |
| 引脚 G15 | CLK0p — Dedicated clock input 0 positive |
| 引脚 AC20 | CONFIG_DONE — Configuration status output (open-drain) |
| 引脚 AE28 | JTAG_TCK — JTAG test clock |
| 引脚 AF30 | nCONFIG — Configuration active-low control |
典型应用
10CL080YF780C8G 适用于 6 应用s: Industrial Machine Vision, Motor and Motion Control, Video Bridging and Protocol Conversion, Factory Automation I/O Expansion, Cost-Sensitive Telecommunications Line Cards, Test and Measurement Instrumentation.
Industrial Machine Vision
The 10CL080YF780C8G is well suited for industrial machine vision systems where cost per megapixel processed matters. Its 423 18x18 multipliers and 2.8 Mbits of embedded memory enable real-time Bayer demosaicing, edge detection, and object recognition pipelines on 2-5 MP camera streams. The F780 package exposes up to 423 user I/O, allowing direct connection to MIPI CSI-2 deserializer bridges (e.g., Toshiba TC358743) and multiple LVDS camera channels. Designers typically instantiate DDR3 controllers in Quartus Prime to buffer frame data, leveraging the device's four PLLs for pixel-clock synthesis. Compared to larger Cyclone V or Arria 10 FPGAs, the 10CL080 offers a 30-50% cost reduction at comparable logic density, making it the sweet spot for multi-camera inspection lines in factory automation.
推荐
Motor and Motion Control
In 3-phase motor and motion control applications, the 10CL080YF780C8G delivers sufficient DSP horsepower to implement Field-Oriented Control (FOC) and Space-Vector PWM on multiple PMSM/BLDC axes simultaneously. Each axis consumes roughly 30 18x18 multipliers for Park/Clarke transforms and PI loops; with 423 multipliers the device can drive up to 12 axes from a single chip. The 423 user I/Os accommodate encoder interfaces (QEP, SSI, BiSS), resolver-to-digital converter SPI buses, and high-resolution PWM outputs. Its 60 nm low-power process keeps junction temperature manageable in enclosed motor-drive IP65 enclosures, while the four PLLs synthesize the switching frequencies (typically 8-32 kHz) and the resolver excitation carrier (10-20 kHz). Industrial users should select the 10CL080YF780I7G variant if ambient temperatures may exceed 85C.
推荐
Video Bridging and Protocol Conversion
The 10CL080YF780C8G is widely deployed in video bridging applications that need to convert between HDMI, DisplayPort, MIPI, and LVDS without expensive ASSPs. Its M9K memory blocks provide efficient line buffers for video rescaling and color-space conversion (RGB to YCbCr, 4:4:4 to 4:2:0), while the 423 multipliers accelerate chroma upsampling. The F780 footprint's high ball count allows simultaneous routing of three HDMI 1.4 input channels (TMDS clock + data pairs) plus a parallel RGB output to an LCD controller. Designers typically instantiate Altera's VIP (Video and Image Processing) MegaCore functions to handle scalers, deinterlacers, and alpha blendiers with minimal logic overhead. Compared to ASSPs like the Toshiba TC358870, the 10CL080 trades deterministic latency for greater format flexibility and field upgradability through bitstream reload.
推荐
Factory Automation I/O Expansion
Programmable Logic Controllers (PLCs) and distributed I/O modules use the 10CL080YF780C8G to aggregate and translate between industrial protocols such as EtherCAT, PROFINET, EtherNet/IP, and Modbus TCP. The device's 423 user I/Os and 20 global clock networks accommodate multiple isolated RS-485 transceivers, 24V digital inputs with optocouplers, and high-speed SPI for analog front-ends. Cyclone 10 LP's hardened PCIe Gen1 hard IP (where fitted) is not present in this family, but the device supports SGMII GbE via soft MACs. Quartus Prime's Qsys toolchain enables rapid integration of the TSE (Triple-Speed Ethernet) MegaCore with deterministic real-time scheduling. Compared to discrete MCU + CPLD architectures, the FPGA consolidates logic, reduces BOM cost, and simplifies IEC 61131-3 firmware certification for industrial control cabinets.
推荐
Cost-Sensitive Telecommunications Line Cards
In low-density DSLAM, GPON, or small-cell backhaul line cards, the 10CL080YF780C8G performs packet classification, traffic shaping, and timing synchronization. The M9K memory blocks hold small flow tables and statistics counters, while the 423 multipliers accelerate Reed-Solomon FEC and CRC32 offload. The F780 package's 423 user I/Os support direct SGMII connections to Gigabit Ethernet PHYs without external glue logic. Designers typically instantiate the Altera 1588 PTP MegaCore for IEEE 1588v2 precision-time-protocol synchronization required in 4G/5G fronthaul. Compared to mid-range FPGAs like the Arria V or Cyclone V GT, the 10CL080 achieves equivalent functional throughput at substantially lower unit cost, making it ideal for high-volume cost-sensitive telecom line cards.
推荐
Test and Measurement Instrumentation
Portable test instruments and protocol analyzers leverage the 10CL080YF780C8G to provide reconfigurable stimulus, capture, and protocol decoding. The 423 18x18 multipliers implement FIR filters, FFT cores (up to 1024-point), and pseudo-random binary sequence (PRBS) generators used in BERT (bit-error-rate testing). The F780 package's 423 user I/Os support multiple high-speed ADC/DAC interfaces via LVDS, and the four PLLs generate the sampling clocks with sub-picosecond jitter. Cyclone 10 LP's low static power (~250 mW typical) makes it suitable for battery-powered handheld instruments. Designers use Quartus Prime's SignalTap Logic Analyzer for in-system verification without external logic analyzers, significantly reducing bench debug time during prototype bring-up.
推荐
推荐产品汇总
工程参考数据： 10CL080YF780C8G ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | 10CL080YF780C6G | 10CL080YF780I7G | 10CL080YF780C7G |
|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel |
| Package | 780-ball F780 BGA | 780-ball F780 BGA (same) | 780-ball F780 BGA (same) | 780-ball F780 BGA (same) |
| Logic Elements | 81,264 | 81,264 | 81,264 | 81,264 |
| Embedded Memory | 2,810,880 bits | 2,810,880 bits | 2,810,880 bits | 2,810,880 bits |
| 18x18 Multipliers | 423 | 423 | 423 | 423 |
| Speed Grade | C8 (commercial) | C6 (~25-30% faster) | I7 (industrial temp) | C7 (intermediate) |
| Operating Temperature | 0C to +85C | 0C to +85C | -40C to +100C | 0C to +85C |
| PLLs | 4 | 4 | 4 | 4 |
| RoHS Compliant | Yes | Yes | Yes | Yes |
关键差异点
- Largest Cyclone 10 LP density in the cost-optimized family （对比 10CL055YF484C8G (smaller Cyclone 10 LP))
- F780 BGA offers the highest I/O count in the Cyclone 10 LP family （对比 10CL080YF484C8G (F484 package))
- Lower power vs comparable-density Cyclone V devices （对比 5CEFA7F23I7N (Cyclone V E, 149K LE))
设计说明
Estimated: with a typical 60 nm Cyclone 10 LP core utilization of 70% at 25C ambient, the 10CL080YF780C8G dissipates roughly 0.8-1.2 W. The F780 BGA thermal resistance theta_JA is approximately 12 C/W with a 4-layer JEDEC test board (per Altera Cyclone 10 LP thermal characterization). Designers targeting industrial temperature ranges should still select the I7 speed grade variant to guarantee timing closure at -40C and +100C, as C8 is only characterized for 0C to +85C.
The 780-ball F780 BGA requires a 1.0 mm pitch microvia stack-up. Use 4-6 layer PCB with at least one full ground plane directly under the BGA to minimize return-path inductance for the high-speed LVDS pairs. All VCCINT, VCCPLL, and VCCIO pins must be decoupled with 0.1 uF X7R ceramics placed within 100 mils of each supply ball, plus 10 uF bulk capacitors per supply rail. Series termination resistors for SSTL/HSTL interfaces should be placed within 200 mils of the FPGA pin to maintain signal integrity above 200 MHz.
Do not connect configuration pins (nCONFIG, MSEL[0..3]) randomly; the MSEL strap selects between AS, PS, FPP, and JTAG configuration modes and must match the EPCQ flash or download cable used. For designs migrating from Cyclone IV, the JTAG ID and configuration bitstream format differ, so the EPCS/EPCQ flash must be re-programmed and the Quartus project re-target-compiled. Differential RX pairs unused for LVDS should be tied to a defined logic level through Quartus pin-planner rather than left floating.
For DDR3 memory interfaces up to 400 MHz (800 Mbps), use the Altera PHY Lite for Parallel Interfaces (PIPE) MegaCore and follow the pin connection guidelines for read/write DQS delay-line calibration. Source-synchronous interfaces above 200 MHz require IBIS-AMI simulations to validate channel loss, with emphasis on via stub minimization via back-drilling. The F780 ball-map groups DQS groups in dedicated I/O banks (typically banks 3, 4, 5); do not reassign DQS pairs across bank boundaries or write-leveling will fail.
合规信息
RoHS and REACH compliant per Intel product declaration pages. The C8 commercial temperature grade is not AEC-Q100 qualified; choose industrial or automotive-grade Cyclone 10 LP variants (I7 or AT) for AEC-Q100 applications. Halogen-free per Intel PSG green-compliance statement.