ADC1412D125HN/C1:5 - Dual 14-bit 125MSPS ADC, HVQFN-64 | NXP
料号： ADC1412D125HN/C1:5 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $49.9996 | $50.00 |
| 10 | $44.5 | $445.00 |
| 100 | $38.2 | $3,820.00 |
| 500 | $32.75 | $16,375.00 |
| 1,000 | $28.9 | $28,900.00 |
ADC1412D125HN/C1:5 概述
A pipelined ADC is a type of analog-to-digital converter that uses multiple cascaded low-resolution stages to achieve high overall resolution and high conversion speed simultaneously. Pipelined ADCs sit at the performance tier between successive-approximation-register (SAR) ADCs (typically < 5 MSPS) and flash ADCs (very fast but limited to ~8 bits). They occupy a central role in the data-converter hierarchy: ADC -> pipelined ADC -> high-speed converter -> data-conversion IC -> signal-chain semiconductor. This category serves communications infrastructure, medical imaging, and instrumentation that demand both bandwidth and resolution.
Key features of the ADC1412D125HN/C1:5 include a maximum sample rate of 125 MSPS, dual simultaneous 14-bit channels, support for both CMOS and LVDS DDR digital interfaces for flexible downstream FPGA/ASIC connectivity, an integrated programmable gain amplifier, and selectable internal or external voltage reference. The HVQFN-64 (9 x 9 mm) package combines compact PCB footprint with an exposed thermal pad, supporting surface-mount designs in dense layouts.
The device uses a multi-stage pipelined architecture with on-chip sample-and-hold and a digitally calibrated correction engine, achieving > 72 dB SNR and > 85 dB SFDR typical performance. Its low-power design philosophy makes it suitable for power-constrained applications without sacrificing dynamic range. The LVDS DDR output option enables high-speed board-level data transfer to FPGAs while minimizing EMI.
Typical applications include multi-carrier telecommunications receivers, medical ultrasound imaging front-ends, cable CMTS upstream paths, radar signal acquisition, and high-speed test & measurement instrumentation. Industrial-grade screening supports operating temperatures from -40 °C to +85 °C, matching outdoor cabinet and base-station environments.
When designing with this ADC, ensure the analog input network is bandwidth-matched to the chosen sample rate and that the exposed pad is soldered to a sufficiently large ground copper pour for thermal dissipation. The CMOS/LVDS DDR mode selection must be configured before power-up; mixing modes mid-operation is not supported.
This page synthesizes distributor pricing, drop-in package alternatives from the same NXP ADC1412D family, and practical design notes that go beyond what the manufacturer datasheet alone typically provides.
直接替换替代料： ADC1412D125HN/C1:5 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： ADC1412D125HN/C1:5 （相同外形与封装尺寸） ——差异在于 Package, Input Type, Data Interface, Operating Temperature, Resolution.
快速对比工具——选择替代料号进行并排对比：
ADC1412D125HN/C1
✅ 直接替换📋 参考替代料（不在目录中）
ADC1412D065HN-C1
✅ 直接替换✓ 有现货
$21.45 / 个
查看数据手册 →ADC1112D125HN-C18
✅ 直接替换✓ 有现货
$9.48 / 个
查看数据手册 →ADC1213S125HN-C1
✅ 直接替换✓ 有现货
$18.45 / 个
查看数据手册 →ADC1410S105HN-C1
✅ 直接替换✓ 有现货
$17.8 / 个
查看数据手册 →ADC1412D125HN/C1:5 最大额定值与电气特性
| 分辨率 | 14 bit |
| Number of Channels | 2 (dual, simultaneous sampling) |
| Architecture | Pipelined |
| Maximum Sample Rate | 125 MSPS |
| Supported Sample Rates | 65 / 80 / 105 / 125 MSPS |
| Digital Output Interface | CMOS or LVDS DDR (selectable) |
| Input Type | Differential analog inputs |
| Voltage Reference | Internal or external (selectable) |
| 封装 | 64-HVQFN (9 x 9 mm) with exposed pad |
| Package Code | SOT804-6 / HVQCCN |
| 工作温度范围 | -40 °C to +85 °C (industrial) |
| Screening Level | Industrial |
| 安装类型 | Surface Mount |
| 引脚数量 | 64 |
| RoHS 状态 | Compliant |
| Lead-Free | Yes |
ADC1412D125HN/C1:5 引脚配置
| 引脚 1 | VIN_A+ — Channel A differential analog input (positive) |
| 引脚 2 | VIN_A- — Channel A differential analog input (negative) |
| 引脚 3 | VCM_A — Channel A common-mode voltage |
| 引脚 4 | VREF_IN — External reference voltage input |
| 引脚 5 | VREF_OUT — Internal reference voltage output |
| 引脚 6 | GND — Ground |
| 引脚 7 | VDD_ANA — Analog supply (3.3 V typical) |
| 引脚 8 | VDD_DIG — Digital supply (1.8 V or 3.3 V) |
| 引脚 9 | CLK+ — Differential clock input (positive) |
| 引脚 10 | CLK- — Differential clock input (negative) |
| 引脚 11 | OE/PD — Output enable / power-down control |
| 引脚 12 | MODE — CMOS/LVDS DDR output mode select |
| 引脚 13 | RESET — Digital reset input |
| 引脚 14 | D0_A — Channel A data output bit 0 (LSB) |
| 引脚 15 | D1_A — Channel A data output bit 1 |
| 引脚 16 | D2_A — Channel A data output bit 2 |
| 引脚 17 | D3_A — Channel A data output bit 3 |
| 引脚 18 | D4_A — Channel A data output bit 4 |
| 引脚 19 | D5_A — Channel A data output bit 5 |
| 引脚 20 | D6_A — Channel A data output bit 6 |
| 引脚 21 | D7_A — Channel A data output bit 7 |
| 引脚 22 | D8_A — Channel A data output bit 8 |
| 引脚 23 | D9_A — Channel A data output bit 9 |
| 引脚 24 | D10_A — Channel A data output bit 10 |
| 引脚 25 | D11_A — Channel A data output bit 11 |
| 引脚 26 | D12_A — Channel A data output bit 12 |
| 引脚 27 | D13_A — Channel A data output bit 13 (MSB) |
| 引脚 28 | DCLK_A — Channel A data clock output |
| 引脚 29 | GND — Ground |
| 引脚 30 | VIN_B+ — Channel B differential analog input (positive) |
| 引脚 31 | VIN_B- — Channel B differential analog input (negative) |
| 引脚 32 | VCM_B — Channel B common-mode voltage |
| 引脚 33 | NC — Not connected (per datasheet) |
| 引脚 34 | NC — Not connected (per datasheet) |
| 引脚 35 | GND — Ground |
| 引脚 36 | VDD_ANA — Analog supply (3.3 V typical) |
| 引脚 37 | D0_B — Channel B data output bit 0 (LSB) |
| 引脚 38 | D1_B — Channel B data output bit 1 |
| 引脚 39 | D2_B — Channel B data output bit 2 |
| 引脚 40 | D3_B — Channel B data output bit 3 |
| 引脚 41 | D4_B — Channel B data output bit 4 |
| 引脚 42 | D5_B — Channel B data output bit 5 |
| 引脚 43 | D6_B — Channel B data output bit 6 |
| 引脚 44 | D7_B — Channel B data output bit 7 |
| 引脚 45 | D8_B — Channel B data output bit 8 |
| 引脚 46 | D9_B — Channel B data output bit 9 |
| 引脚 47 | D10_B — Channel B data output bit 10 |
| 引脚 48 | D11_B — Channel B data output bit 11 |
| 引脚 49 | D12_B — Channel B data output bit 12 |
| 引脚 50 | D13_B — Channel B data output bit 13 (MSB) |
| 引脚 51 | DCLK_B — Channel B data clock output |
| 引脚 52 | NC — Not connected (per datasheet) |
| 引脚 53 | NC — Not connected (per datasheet) |
| 引脚 54 | GND — Ground |
| 引脚 55 | VDD_DIG — Digital supply (1.8 V or 3.3 V) |
| 引脚 56 | FSR_A — Channel A full-scale range select |
| 引脚 57 | FSR_B — Channel B full-scale range select |
| 引脚 58 | BIAS — Bias current setting |
| 引脚 59 | TEST — Factory test pin (leave floating) |
| 引脚 60 | SENSE — Voltage reference sense / mode |
| 引脚 61 | NC — Not connected (per datasheet) |
| 引脚 62 | NC — Not connected (per datasheet) |
| 引脚 63 | NC — Not connected (per datasheet) |
| 引脚 64 | NC — Not connected (per datasheet) |
典型应用
ADC1412D125HN/C1:5 适用于 6 应用s: Multi-Carrier Telecommunications Receiver, Medical Ultrasound Imaging Front-End, Cable CMTS Upstream Path, Radar Signal Acquisition, High-Speed Test & Measurement Instrumentation, Industrial Data Acquisition Systems.
Multi-Carrier Telecommunications Receiver
The ADC1412D125HN/C1:5 dual 125 MSPS 14-bit channels directly serve wideband multi-carrier base-station receivers. Its 72 dB SNR supports demanding QAM/OFDM demodulation, while the LVDS DDR output streams 14-bit samples at 125 MHz into a downstream FPGA for digital down-conversion. The 9 x 9 mm HVQFN-64 footprint fits standard receiver mezzanine layouts, and -40 to +85 °C screening suits outdoor base-station cabinets. Pair with a low-noise LDO regulator (e.g., TPS7A4701) for the analog supply rail to preserve dynamic range.
推荐
Medical Ultrasound Imaging Front-End
The ADC1412D125HN/C1:5 dual simultaneous-sampling 14-bit channels at 125 MSPS deliver the channel density required for multi-element ultrasound probes. Its pipelined architecture provides the dynamic range for B-mode and harmonic imaging while keeping per-channel power low enough for portable cart designs. The LVDS DDR output mode minimizes EMI in sensitive probe cables. Industrial -40 to +85 °C screening supports equipment-room thermal envelopes. Combined with a low-noise front-end LNA, it enables 12-16 channel beamforming arrays.
推荐
Cable CMTS Upstream Path
The ADC1412D125HN/C1:5 is well suited to cable modem termination system (CMTS) upstream receivers where multiple DOCSIS channels must be digitized simultaneously. Its 125 MSPS rate captures the full upstream spectrum, while dual channels allow redundant or diversity reception paths. The selectable CMOS or LVDS DDR output gives designers flexibility for legacy ASIC or modern FPGA interfaces. The HVQFN-64 package's exposed pad supports thermal dissipation in densely populated line-card designs.
推荐
Radar Signal Acquisition
The ADC1412D125HN/C1:5's 125 MSPS sample rate captures IF radar signals up to ~62.5 MHz (Nyquist), making it suitable for surveillance, weather radar, and automotive radar receiver digitization. The dual channels enable I/Q sampling directly from a quadrature mixer, simplifying analog signal chain design. Its pipelined architecture maintains linearity across full-scale IF inputs, critical for pulse compression. The compact HVQFN-64 footprint allows high-channel-density receivers in phased-array antenna electronics.
推荐
High-Speed Test & Measurement Instrumentation
The ADC1412D125HN/C1:5 fits digital oscilloscope, spectrum analyzer, and arbitrary waveform digitizer front-ends. Dual 14-bit channels at 125 MSPS support 2-channel simultaneous sampling, while LVDS DDR outputs deliver high-fidelity data to FPGA-based signal-processing engines. The 72 dBFS SNR preserves measurement accuracy for spectral purity tests. Industrial temperature screening and RoHS compliance simplify integration into laboratory and production test equipment. Pair with high-bandwidth differential input amplifiers for full-bandwidth performance.
推荐
Industrial Data Acquisition Systems
The ADC1412D125HN/C1:5 serves high-channel-count industrial DAQ platforms for vibration analysis, sonar, and rotating machinery monitoring. Dual simultaneous 14-bit channels at 125 MSPS support wide dynamic range, while the industrial -40 to +85 °C temperature range tolerates factory-floor environments. The HVQFN-64 footprint with exposed pad enables compact PCB layouts. Engineers often pair this ADC with FPGA-based processing engines for real-time FFT and condition monitoring algorithms.
推荐
推荐产品汇总
工程参考数据： ADC1412D125HN/C1:5 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADC1412D125HN/C1 | ADC1412D065HN-C1 | ADC1112D125HN-C18 | ADC1213S125HN-C1 | ADC1410S105HN-C1 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | HVQFN-64 (9x9) | HVQFN-64 (9x9) - same | HVQFN-64 (9x9) - same | HVQFN-64 (9x9) - same | HVQFN-64 (9x9) - same | HVQFN-64 (9x9) - same |
| Resolution | 14 bit | 14 bit | 14 bit | 12 bit | 12 bit | 14 bit |
| Channels | 2 (dual) | 2 (dual) | 2 (dual) | 2 (dual) | 1 (single) | 1 (single) |
| Maximum Sample Rate | 125 MSPS | 125 MSPS | 65 MSPS | 125 MSPS | 125 MSPS | 105 MSPS |
| Digital Output Interface | CMOS / LVDS DDR (selectable) | CMOS / LVDS DDR | CMOS / LVDS DDR | CMOS / LVDS DDR | CMOS / LVDS DDR | CMOS / LVDS DDR |
| Operating Temperature | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
| Architecture | Pipelined | Pipelined | Pipelined | Pipelined | Pipelined | Pipelined |
| RoHS Compliance | Yes | Yes | Yes | Yes | Yes | Yes |
关键差异点
- Dual 14-bit simultaneous sampling at 125 MSPS in single package （对比 ADC1213S125HN-C1 (single-channel 12-bit))
- Selectable CMOS or LVDS DDR digital output （对比 TI ADS62P48 (LVDS-only))
- Industrial -40 to +85 °C screening standard （对比 Consumer-grade SAR ADCs in similar role)
设计说明
Solder the exposed thermal pad of the HVQFN-64 package to a continuous ground copper pour covering at least 1 cm² for thermal dissipation. Use a 4-layer PCB with dedicated analog and digital ground planes split under the ADC; join them at a single point near the ADC ground pin. Route differential analog inputs (VIN_A+/-, VIN_B+/-) as 100 Ω impedance-matched pairs with length matching within 0.5 mm to preserve 72 dB SNR at 125 MSPS.
Use low-noise LDO regulators (e.g., TPS7A4701RGWR) for the 3.3 V analog supply (VDD_ANA) and a separate LDO for the digital supply (VDD_DIG) to isolate digital switching noise from sensitive analog circuits. Place 10 µF ceramic + 0.1 µF ceramic bypass capacitors as close as possible to each supply pin. The exposed pad must be soldered to a low-impedance ground plane; do not skip this - missing the pad connection can cause 5-10 dB SNR degradation.
Route the LVDS DDR output pairs (D0_A..D13_A, DCLK_A, and channel B equivalents) as 100 Ω differential microstrip lines with length matching within 1 mm across all pairs. Keep LVDS traces away from analog input traces and clock signals to minimize crosstalk. For CMOS output mode, use controlled-impedance single-ended traces (typically 50 Ω) and group the 14 data bits + clock together. Maintain solid ground reference beneath all output traces.
Do not switch between CMOS and LVDS DDR output modes after power-up without re-initializing the device via RESET pin. Per the NXP datasheet, mid-operation mode changes can corrupt sample alignment. Always configure MODE pin before applying clocks. Avoid driving the analog inputs beyond the absolute maximum rating (typically 3.3 V on VDD_ANA); overdrive can permanently damage the input ESD structure. Use a transformer-coupled or fully differential driver (e.g., ADA4937) to maximize SFDR.
Drive the CLK+/CLK- differential clock input with a low-jitter clock source (jitter < 200 fs RMS) to preserve aperture jitter performance at 125 MSPS. Per the NXP datasheet, SNR degrades approximately 2 dB per 100 fs of additional clock jitter above the part's intrinsic aperture jitter. Use a clock buffer or transformer (e.g., ADT1-1WT) to convert single-ended oscillator outputs to differential while maintaining low jitter.
合规信息
RoHS and lead-free compliance confirmed per NXP product page. Industrial screening level (-40 to +85 °C). Not AEC-Q100 qualified - this is a commercial/industrial ADC. Halogen-free status not explicitly stated in verified data.
