ATF22V10CQZ-20JI - 500-Gate CPLD, 20 ns | Microchip
料号: ATF22V10CQZ-20JI ✓ 量产中ATF22V10CQZ-20JI 概述
An erasable programmable logic device, or EPLD, is a semiconductor that stores configurable Boolean logic in nonvolatile memory. It occupies the hierarchy between fixed-function gate arrays and field-programmable gate arrays: the logic architecture is fixed, but individual product terms and interconnect paths can be programmed to implement specialized control, decoding, address mapping, or glue-logic functions. Unlike a mask-programmed ASIC, an EPLD can be reprogrammed without changing the integrated-circuit package or PCB layout.
The ATF22V10CQZ-20JI provides 10 macrocells and approximately 500 equivalent gates, making it useful for compact logic consolidation where several gates, counters, decoders, or state machines would otherwise occupy separate standard logic devices. Its 20 ns speed grade is intended for general-purpose control logic, while the electrically erasable CMOS process supports zero standby power dissipation according to the Microchip product page.
Technical operation is based on user-selectable sum-of-products logic implemented through the device's macrocell architecture. The 28-PLCC footprint exposes 10 dedicated I/O pins, power connections, and programming or configuration-related terminals. Because this is a PLD rather than a mask-programmed gate array, the final logic function is established with a programming file and appropriate device programming equipment.
Typical applications include industrial control interfaces, legacy peripheral glue logic, address decoding, programmable timing and sequence generation, test-system control, and embedded system logic that must retain its configuration after power is removed. Consolidating several conventional gate-level functions into one 28-pin PLD can reduce component count while preserving a straightforward software-driven configuration workflow.
PCB design should preserve the manufacturer's PLCC land pattern, provide adequate programming access, and decouple the 5 V supply close to the device. Designers should also check every external signal against the family's voltage and timing limits because the ATF22V10CQZ-20JI is a 5 V, legacy-interface device rather than a modern 3.3 V or 1.8 V logic part.
This page combines the manufacturer's device description with exact ordering details, verified package and speed information, structured replacement guidance, and practical design notes that help engineers evaluate the ATF22V10CQZ-20JI without relying only on basic distributor search results.
直接替换替代料: ATF22V10CQZ-20JI ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ATF22V10CQZ-20JI (相同外形与封装尺寸) ——差异在于 Device Type, Package, Mounting Type, Programmable Technology.
ATF22V10BQL-20JI
✅ 直接替换📋 参考替代料(不在目录中)
ATF22V10CQZ-20JU
✅ 直接替换联系询价
查看数据手册 →ATF22V10CQZ-20SU
✅ 直接替换📋 参考替代料(不在目录中)
GAL22V10D-25QJ
✅ 直接替换📋 参考替代料(不在目录中)
GAL22V10D-10QJ
✅ 直接替换📋 参考替代料(不在目录中)
GAL22V10D-5LJN
✅ 直接替换📋 参考替代料(不在目录中)
ATF22V10CQZ-20JI 最大额定值与电气特性
| Device Type | High-performance electrically erasable CMOS programmable logic device |
| Programmable Logic Architecture | EPLD |
| Macrocell Count | 10 macrocells |
| Equivalent Gate Count | 500 gates |
| Target Propagation Delay | 20 ns |
| Maximum Product Speed | 50 MHz |
| 电源电压 | 5 V |
| I/O Pin Count | 10 I/O pins |
| Total Pin Count | 28 pins |
| 封装 | 28-pin PLCC, 11.51 mm x 11.51 mm |
| 安装类型 | Surface mount |
| Configuration Memory | Electrically erasable flash memory |
| Standby Power Dissipation | 0 W |
| Process Technology | Electrically erasable CMOS |
| Programming | Programmable logic configuration |
ATF22V10CQZ-20JI 28-pin plcc, 11.51 mm x 11.51 mm 引脚配置指南
ATF22V10CQZ-20JI(28-pin plcc, 11.51 mm x 11.51 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: ATF22V10CQZ-20JI.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ATF22V10CQZ-20JI 适用于 6 应用s: Industrial Control Interface Logic, Peripheral Address Decoding, Programmable Timing and Sequencing, Test and Measurement Control, Embedded System Glue Logic, Legacy Communication Control.
Industrial Control Interface Logic
The ATF22V10CQZ-20JI fits legacy industrial control systems where multiple Boolean functions must be consolidated without adding a complex FPGA. Its 10 macrocells, 500 equivalent gates and 10 I/O pins can implement command decoding, interlocks, alarm logic, and state sequencing in a 28-PLCC package. The 20 ns propagation-delay grade supports general control paths rather than high-speed memory interfaces. Because the configuration is stored in electrically erasable flash memory, the logic remains present after power removal. Engineers should reserve the programming interface, validate every 5 V signal against the device limits, and confirm the exact operating-temperature suffix before deployment in factory equipment.
推荐
Peripheral Address Decoding
The ATF22V10CQZ-20JI can decode legacy peripheral addresses and generate register-select signals inside embedded control systems. Ten macrocells and 500 equivalent gates provide enough capacity to combine multiple decode equations into one programmable device, while the 10 available I/O pins can carry decoded and interlock signals. The 20 ns speed grade suits processor buses that do not require modern FPGA timing performance. Electrically erasable flash configuration allows firmware-driven updates during production or maintenance. PCB implementation should keep the PLCC footprint unobstructed for programming and use a controlled 5 V supply. Signal timing, input thresholds and output loading should be checked against the ATF22V10CQZ family specifications.
推荐
Programmable Timing and Sequencing
The ATF22V10CQZ-20JI is suitable for deterministic timing, sequencing and state-machine logic in legacy instrumentation. Its 10 macrocells can be organized to implement counters, retriggerable delays, phase sequencing, and interlock outputs, while the 20 ns propagation-delay class provides a defined timing basis for moderate clock rates. The electrically erasable configuration permits repeatable programming during manufacturing and targeted logic changes during maintenance. The 5 V supply and 28-PLCC package suit established industrial and test-system boards. Designers should account for PLCC orientation, provide local supply decoupling, and use the manufacturer pin table to identify programming, clock, input and output terminals before assigning PCB nets.
推荐
Test and Measurement Control
The ATF22V10CQZ-20JI can consolidate control logic in test and measurement systems that require relay sequencing, instrument selection, status encoding, and self-test paths. Its 10 macrocells and 500-gate complexity are useful for implementing a compact state machine and associated Boolean equations, while the 20 ns grade is appropriate for many low-to-moderate-speed instrument-control buses. Electrically erasable flash storage retains the test configuration between power cycles and supports controlled reprogramming. The 28-PLCC package requires a corresponding J-lead land pattern and adequate assembly clearance. Check output drive, input thresholds, timing margins, and the final environmental suffix against the manufacturer documentation.
推荐
Embedded System Glue Logic
The ATF22V10CQZ-20JI is well suited to glue logic around processors, memory devices, older interface controllers, and custom expansion boards. Ten macrocells can combine chip-select generation, bus arbitration, interrupt qualification, watchdog enable logic, and peripheral isolation without requiring several separate gate packages. The 20 ns propagation delay is appropriate for legacy control paths, and the electrically erasable flash configuration allows board-level logic to be revised without changing the PCB. The 10 I/O pins limit how much external signaling can be routed directly through the PLD. A production design should verify the 5 V interface levels, programmer access, pin orientation and system timing before release.
推荐
Legacy Communication Control
The ATF22V10CQZ-20JI can support protocol framing, command parsing and handshake control in legacy communication equipment where a small amount of deterministic parallel logic is needed. The 10 macrocells and 500 equivalent gates can implement framing checks, parity generation, transmitter enable sequencing, and status decoding, while the 20 ns delay class addresses moderate-speed parallel interfaces. The electrically erasable flash configuration retains protocol logic across power cycles and supports product variants with the same hardware. The 5 V PLCC implementation is most appropriate for established 5 V equipment. Validate signal rise and fall times, output loading, timing margins and programming compatibility against the exact manufacturer family documentation.
推荐
推荐产品汇总
工程参考数据: ATF22V10CQZ-20JI ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ATF22V10BQL-20JI | ATF22V10CQZ-20JU | ATF22V10CQZ-20SU | GAL22V10D-25QJ | GAL22V10D-10QJ |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Lattice Semiconductor | Lattice Semiconductor |
| Package | 28-PLCC (11.51 x 11.51 mm) | 28-PLCC (11.51 x 11.51 mm) | 28-PLCC (11.51 x 11.51 mm) | 28-PLCC (11.51 x 11.51 mm) | 28-PLCC (11.51 x 11.51 mm) | 28-PLCC (11.51 x 11.51 mm) |
| Programmable Logic Type | Electrically erasable CMOS PLD | Electrically erasable CMOS PLD | Electrically erasable CMOS PLD | Electrically erasable CMOS PLD | GAL22V10D EPLD | GAL22V10D EPLD |
| Macrocell Count | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Equivalent Gate Count | 500 gates | 500 gates | 500 gates | 500 gates | 500-gate class | 500-gate class |
| Propagation Delay | 20 ns | 20 ns | 20 ns | 20 ns | 25 ns | 10 ns |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| I/O Pin Count | 10 I/O pins | 10 I/O pins | 10 I/O pins | 10 I/O pins | 10 I/O pins | 10 I/O pins |
关键差异点
- Maintains the ATF22V10CQZ 20 ns timing class (对比 GAL22V10D-25QJ)
- Provides direct family continuity with the same core architecture (对比 ATF22V10CQZ-20JU)
- Matches the stated ATF22V10BQL drop-in class (对比 ATF22V10BQL-20JI)
设计说明
Use the exact 28-pin PLCC land pattern published for the ATF22V10CQZ family, including the correct J-lead pitch, body orientation and pin-1 marking. A PLCC symbol is not sufficient to guarantee footprint compatibility. Preserve clearance around the package for socketed programming or replacement, and route programming-related nets to accessible pads or connectors. Before fabrication, compare every package terminal in the PCB library with the manufacturer pin-description table, including power, ground, dedicated inputs and dedicated outputs.
Place the 5 V supply decoupling network directly beside the PLCC power and ground terminals, with the shortest practical return path to the device. Follow the manufacturer recommendation for capacitor type, voltage rating and effective capacitance at the operating frequency. Treat zero standby power as a specific operating condition rather than a statement that active current is zero. Check the programmed logic state and switching activity when estimating supply current, and verify that nearby legacy logic does not create ground bounce on the PLCC supply pins.
Do not substitute the ATF22V10CQZ-20JI solely because an alternative uses a 28-PLCC package and a 10-macrocell architecture. Confirm pin names, 5 V electrical compatibility, propagation-delay limits, programming-device support, configuration-file handling and the final temperature or qualification suffix. A faster GAL22V10D grade may change power behavior or output timing even though its footprint matches. Document any substitution with a reviewed cross-reference and validate it across voltage, temperature and worst-case timing corners.
合规信息
The manufacturer product page and distributor listings identify the ATF22V10CQZ-20JI and its device characteristics, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free or conflict-minerals declarations were identified.