Broadcom

BCM5241A1KMLG - 10/100 Ethernet PHY | Broadcom Limited

料号: BCM5241A1KMLG ✓ 量产中
2.5 V and 3.3 V Vdss
最小起订量: 1 |

BCM5241A1KMLG 概述

Broadcom Limited BCM5241A1KMLG is a single-port Ethernet physical-layer transceiver supporting 10BASE-T, 100BASE-TX, and 100BASE-EFX operation. It integrates one Ethernet driver and one receiver, supports 2.5 V and 3.3 V supply rails, and is identified as a 10/100 Base-TX MII PHY transceiver. The device is intended for embedded networking products that connect a digital network controller or processor to an Ethernet magnetics interface.

An Ethernet PHY is the physical-layer component in an Ethernet communications system. It converts digital data from a MAC or network processor into signals suitable for a twisted-pair cable and reconstructs incoming signals for the digital controller. In the network hierarchy, a PHY is a network interface IC and a semiconductor device within the broader category of Ethernet interface integrated circuits. The BCM5241 supports both 10 Mb/s and 100 Mb/s copper links for legacy Fast Ethernet equipment.

The BCM5241A1KMLG provides one transmit driver and one receive channel for a single-port design. Its identified 2.5 V and 3.3 V operating options allow implementation with either a 2.5 V core-side supply or a 3.3 V interface-side supply where the surrounding circuitry permits it. Its listed 170 mW power figure is relevant to compact embedded systems, although the actual board-level consumption depends on operating mode, network activity, supply voltage, and the external circuit configuration.

Broadcom identifies BCM5241A1KMLG as an active MII PHY transceiver. MII, or Media Independent Interface, separates the PHY from the digital MAC through standardized control, data, and status signals. This division of responsibility allows the same physical-layer circuit to support multiple Ethernet MAC implementations. The device also supports 100BASE-EFX, extending its application scope beyond the conventional 10BASE-T and 100BASE-TX copper modes listed for the part.

Typical uses include industrial Ethernet controllers, embedded routers, print servers, set-top equipment, network interface adapters, and other equipment requiring a single copper Ethernet port. The part is particularly relevant where a 10/100 Mb/s connection is sufficient and board area, component count, and interface simplicity matter more than support for gigabit data rates.

PCB design should preserve the separation between digital circuitry, analog PHY signals, and the Ethernet transformer network. Keep the PHY supply bypass capacitors close to their power pins, route high-speed differential and analog signals over continuous ground planes, and follow the manufacturer pin-description table and recommended application layout when assigning tracks and test points.

This page organizes the Broadcom BCM5241 product information, verified distributor records, lifecycle status, interface characteristics, application guidance, and same-family replacement information into an engineering-focused reference for evaluating the BCM5241A1KMLG in a new Ethernet design.

直接替换替代料: BCM5241A1KMLG ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: BCM5241A1KMLG (相同外形与封装尺寸) ——差异在于 Product Type.

Broadcom
Product Type: 10/100BASE-TX single-channel Ethernet transceiver
对比 BCM5241A1KMLG →

BCM5241A1IMLG

✅ 直接替换
Broadcom
📦 BCM5241 manufacturer package
10/100BASE-TX single-channel Ethernet transceiver · 1 port · 10BASE-T and 100BASE-TX · 10 Mb/s and 100 Mb/s · HVQFN-32 with exposed pad, 5 x 5 mm · 32 pins · Industrial temperature · Compliant

联系询价

查看数据手册 →

BCM5241A1KML

✅ 直接替换
📦 BCM5241 manufacturer package
Same BCM5241 family and functional network rates; final suffix, package, and qualification differences must be confirmed before substitution.

📋 参考替代料(不在目录中)

BCM5241A1KMLG-K

✅ 直接替换
📦 BCM5241 manufacturer package
Same BCM5241A1KMLG ordering family with a -K designation; the specific suffix-related operational difference is not stated.

📋 参考替代料(不在目录中)

BCM5241A1KMLG 最大额定值与电气特性

Product Type Ethernet physical-layer transceiver
Ethernet Support 10BASE-T, 100BASE-TX, and 100BASE-EFX
数据速率 10 Mb/s and 100 Mb/s
Port Count 1 port
Number of Drivers 1 driver
Number of Receivers 1 receiver
Host Interface MII
工作电源电压 2.5 V and 3.3 V
Typical Power 170 mW
Product Status Active
Introduction Date April 29, 2001
Manufacturer Broadcom Limited
RoHS 状态 Compliant
Maximum Data Rate 100 Mb/s
安装类型 Surface mount

BCM5241A1KMLG standard 引脚配置指南

BCM5241A1KMLG(standard 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

BCM5241A1KMLG 的 standard 封装引脚图

暂无详细引脚数据: BCM5241A1KMLG.

请参阅 数据手册 以查看完整引脚配置。

典型应用

BCM5241A1KMLG 适用于 6 应用s: Industrial Ethernet Controller, Embedded Router, Print Server, Set-Top Box, Network Interface Adapter, Industrial Sensor Gateway.

🏭

Industrial Ethernet Controller

The BCM5241A1KMLG fits an industrial controller that needs a single 10/100 Mb/s copper Ethernet port and communicates with a network processor through MII. Its 10BASE-T, 100BASE-TX, and 100BASE-EFX support gives the design access to several Fast Ethernet modes, while the listed 170 mW operating power is appropriate for a compact embedded platform. The controller must provide a compatible MII timing and signal interface, and the analog network section must follow the manufacturer’s recommended transformer and filtering layout.

🌐

Embedded Router

An embedded router can use the BCM5241A1KMLG as the physical layer for one 10/100 Mb/s WAN or LAN copper connection. The single-driver, single-receiver arrangement limits the device to one port, which is appropriate for a small access point, gateway, or basic routing module where one Fast Ethernet uplink is sufficient. Its 2.5 V and 3.3 V operating options should be matched to the router’s power architecture, and controlled-impedance MII routing is necessary to preserve signal integrity between the processor and PHY.

🖥️

Print Server

The BCM5241A1KMLG is suitable for a print-server main board that connects an embedded controller to 10/100 Mb/s Ethernet infrastructure. The supported 10BASE-T and 100BASE-TX modes allow the server to operate on both legacy 10 Mb/s and Fast Ethernet networks. Its single-port structure reduces the analog-channel count, while 2.5 V and 3.3 V supply operation provides flexibility in legacy industrial print equipment. Ethernet magnetics, isolation, surge protection, and the connector implementation still require system-level validation.

📺

Set-Top Box

A set-top box can use the BCM5241A1KMLG to add a Fast Ethernet service connection without implementing a full multi-port switching fabric. Support for 10BASE-T, 100BASE-TX, and 100BASE-EFX makes the PHY applicable to common access networks and service equipment, while the listed 170 mW power is relevant to consumer-electronics thermal budgets. The digital controller must support an MII interface, and the PCB should isolate PHY clock and data routing from noisy power and video circuitry.

🔧

Network Interface Adapter

The BCM5241A1KMLG can provide the physical layer for a dedicated single-port network interface adapter connected to a host controller. Because the PHY supports both 10 Mb/s and 100 Mb/s operation, it is useful for adapters intended to connect older host systems to modern Fast Ethernet networks. Designers should verify MII clocking, signal termination, and supply sequencing because host-interface compatibility extends beyond simply matching the 10/100 Mb/s data rate.

🧩

Industrial Sensor Gateway

The BCM5241A1KMLG can add a wired Ethernet uplink to an industrial sensor gateway that already has a controller capable of operating the MII interface. A 100 Mb/s link allows collected process or environmental data to be aggregated without requiring gigabit PHY complexity, and the 170 mW listed operating power is useful in a compact DIN-mounted or embedded gateway. Field deployments must confirm temperature qualification, Ethernet isolation, surge withstand, and grounding practices.

What is the BCM5241A1KMLG datasheet?
The BCM5241A1KMLG datasheet describes a Broadcom single-port 10/100 Ethernet physical-layer transceiver with MII host connectivity. The manufacturer’s BCM5241 Product Brief is available from Broadcom at docs.broadcom.com/docs/12358209. It is the primary technical reference for the device’s electrical characteristics, pin descriptions, interface behavior, and recommended application information. Use the product brief together with the exact ordering-code information when planning the PCB and power supply.
What does BCM5241A1KMLG do?
The BCM5241A1KMLG converts digital Ethernet data between an MII-compatible controller and a 10/100 Mb/s copper network. According to the Broadcom BCM5241 Product Brief, it is a single-port physical-layer transceiver supporting 10BASE-T, 100BASE-TX, and 100BASE-EFX. The device includes one Ethernet driver and one receiver and can therefore serve one copper Ethernet port in an embedded networking product.
What are the key specifications of BCM5241A1KMLG?
The BCM5241A1KMLG is a 10/100 Mb/s, single-port Ethernet PHY with MII host connectivity, one driver, one receiver, and 2.5 V or 3.3 V operating rails. Broadcom identifies the device as active, and a distributor technical listing gives its typical power as 170 mW. These characteristics place it in the Ethernet interface IC category and make it appropriate for embedded Fast Ethernet equipment rather than gigabit designs.
Where can I buy BCM5241A1KMLG and check its lead time?
Use the Request a Quote form on this page to ask for BCM5241A1KMLG availability, current lead time, minimum order quantity, and production quantity pricing. The manufacturer lists the product as active, while current channel records should be checked before committing a delivery schedule. A quote request lets the exact MPN, package, quantity, and target delivery date be confirmed together.
Is BCM5241A1KMLG in stock?
BCM5241A1KMLG is available from multiple distribution channels, but stock levels can change without notice. Submit a Request a Quote through this page with the required quantity and target delivery date to obtain a current availability response. Because the manufacturer identifies the BCM5241 as active, the part is suitable for new designs, although obsolete-risk and lifecycle review remain appropriate for long-lived industrial products.
How much does BCM5241A1KMLG cost?
Request a current BCM5241A1KMLG quotation through the Request a Quote form on this page. The form is the appropriate route for checking unit pricing, quantity discounts, stock, and lead time for the exact ordering code. Pricing for an Ethernet PHY can vary with quantity, packaging, and shipment requirements, so a quantity-specific quote provides more useful procurement information than a generic market figure.
What is the lead time for BCM5241A1KMLG?
The current BCM5241A1KMLG lead time should be confirmed through the Request a Quote form on this page. Broadcom identifies the device as active, which supports ongoing sourcing, but available factory and channel inventory can vary by date and quantity. Include the requested delivery date and annual usage in the request so the supplier can respond with a realistic allocation and production schedule.
BCM5241A1KMLG vs BCM5241A1IMLG — which is better?
BCM5241A1KMLG and BCM5241A1IMLG are closely related Broadcom BCM5241 variants with consistent listed operating parameters, including 2.5 V, 3.3 V, and single-channel PHY operation. The defining difference is the ordering-code designation rather than the published network rate or protocol set. Before exchanging them, compare the exact pin descriptions, temperature grade, lifecycle status, and approved ordering codes in the Broadcom BCM5241 Product Brief.
Is BCM5241A1IMLG a drop-in replacement for BCM5241A1KMLG?
BCM5241A1IMLG is the closest identified same-family alternative to BCM5241A1KMLG because its published parameters and interface characteristics are highly similar. It should be treated as a candidate drop-in replacement only after verifying that the exact package, pin assignments, temperature range, and qualification requirements match the installed design. The Broadcom BCM5241 Product Brief and the manufacturer’s approved-part information remain the controlling references.
What can replace BCM5241A1KMLG?
BCM5241A1IMLG and BCM5241A1KML are the closest same-family candidates identified for BCM5241A1KMLG replacement, while cross-brand PHYs require a separate footprint and interface review. A usable replacement must match the package, MII pin assignments, supply voltages, 10/100 Mb/s capabilities, and thermal requirements. Use the Request a Quote form for sourcing and request manufacturer confirmation before treating any candidate as a production drop-in substitute.
When should I choose BCM5241A1KMLG over another Ethernet PHY?
Choose BCM5241A1KMLG when a design requires a mature, active Broadcom 10/100 Mb/s single-port PHY with MII connectivity and support for 10BASE-T, 100BASE-TX, and 100BASE-EFX. Its 2.5 V and 3.3 V operating options provide useful supply flexibility. Choose another PHY only when its pinout, host interface, copper-media support, power budget, and long-term availability better align with the product requirements.
Is BCM5241A1KMLG suitable for an industrial Ethernet controller?
The BCM5241A1KMLG is suitable for a 10/100 Mb/s industrial Ethernet interface when the controller provides a compatible MII and the system requires copper Ethernet rather than gigabit performance. Its single-port architecture, 2.5 V or 3.3 V operation, and 170 mW listed power are relevant to embedded control equipment. The complete operating-temperature range and isolation design must still be confirmed for the deployment environment.
Where is the BCM5241A1KMLG pinout?
The BCM5241A1KMLG pinout is located in the Broadcom BCM5241 Product Brief at docs.broadcom.com/docs/12358209. Use the pin-description table and package drawing to identify power, ground, MII, clock, and analog-network connections before laying out a PCB. A complete public pin list is not reproduced on this page because the exact package drawing and pin table must be checked against the manufacturer document.
Does BCM5241A1KMLG support gigabit Ethernet?
No. BCM5241A1KMLG supports 10 Mb/s and 100 Mb/s Ethernet operation through 10BASE-T, 100BASE-TX, and 100BASE-EFX modes. A gigabit Ethernet design requires a PHY that explicitly supports 1000BASE-T and an appropriate host interface. Although other 10/100 PHYs can provide equivalent link rates, selecting a replacement also requires matching the package, MII implementation, supply rails, and analog-network requirements.
What Ethernet PHYs can replace BCM5241A1KMLG?
The closest identified Broadcom alternatives are BCM5241A1IMLG and BCM5241A1KML, both within the BCM5241 family and therefore the best candidates for pin-level evaluation. Cross-brand 10/100 Ethernet PHYs may provide similar functionality, but they are not automatically drop-in replacements because package size, MII connections, supply sequencing, and analog-network design can differ. Compare every alternative with the manufacturer’s BCM5241 Product Brief before approval.

工程参考数据: BCM5241A1KMLG ——对比、设计指导和合规信息。

选型指南

Choose BCM5241A1KMLG for a new single-port Ethernet design that uses an MII-compatible controller and needs 10 Mb/s or 100 Mb/s copper connectivity. Its identified support for 10BASE-T, 100BASE-TX, and 100BASE-EFX, together with 2.5 V and 3.3 V operating options, makes it suitable for embedded routers, industrial controllers, print servers, and legacy network adapters. Consider BCM5241A1IMLG when its ordering-code and qualification details match the product program more closely; its published interface parameters are highly similar. BCM5241A1KML and BCM5241A1KMLG-K are also same-family candidates, but their package, temperature, and qualification details require confirmation. Do not select a cross-brand PHY solely for its 10/100 Mb/s rating: MII pin compatibility, analog-network layout, supply requirements, and package dimensions must all match before it can serve as a drop-in replacement.

与替代料对比

参数 本产品 BCM5241A1IMLG BCM5241A1KML BCM5241A1KMLG-K
Brand Broadcom Limited Broadcom Limited Broadcom Limited Broadcom Limited
Package BCM5241 manufacturer package BCM5241 manufacturer package BCM5241 manufacturer package BCM5241 manufacturer package
Product Type Ethernet transceiver Ethernet PHY Ethernet PHY Ethernet PHY
Ethernet Data Rate 10 Mb/s and 100 Mb/s 10 Mb/s and 100 Mb/s 10 Mb/s and 100 Mb/s 10 Mb/s and 100 Mb/s

关键差异点

  • Single-port integration reduces the external PHY channel count (对比 BCM5241A1IMLG)
  • Supports three identified copper operating modes (对比 BCM5241A1KML)
  • Supports both 2.5 V and 3.3 V operating rails (对比 BCM5241A1KMLG-K)

设计说明

Separate the MII digital interface from the analog copper-network section and place the PHY close to the Ethernet transformer or connector. Use a continuous ground plane, avoid routing MII clock and data beneath switching supplies, and match trace geometry to the host controller’s MII requirements. The manufacturer’s BCM5241 Product Brief should govern the final pin assignment and reference layout because an incorrectly assigned or omitted pin can prevent link establishment.

Design the 2.5 V and 3.3 V supply paths so that the BCM5241 receives the voltage required by its selected operating mode without excessive ripple. Place the manufacturer-recommended bypass capacitors at the relevant power pins with short ground returns. Estimated: if the listed 170 mW typical operating power applies to the selected mode, approximately 68 mA corresponds to 2.5 V or 52 mA corresponds to 3.3 V; actual regulator capacity should include startup margin and other board loads.

Treat the MII interface as a synchronous digital interface and review clock source, timing margins, impedance, and trace length against the Broadcom product requirements. Provide a low-inductance ground reference, avoid stubs, and keep clock routing away from the analog PHY and Ethernet magnetics. When substituting a BCM5241 family candidate, repeat this review because ordering suffixes can correspond to differences in temperature grade or qualification even when the basic 10/100 Mb/s ratings remain the same.

Do not treat a 10/100 Mb/s PHY as a gigabit Ethernet device or assume that a similar Broadcom suffix guarantees production interchangeability. Confirm the exact package drawing, pin names, operating-temperature grade, supply sequencing, and approved status in the manufacturer product brief. For a second-source decision, compare the analog network and MII interfaces rather than relying only on the Ethernet speed and nominal operating voltage.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

RoHS compliance is identified in the product listing. Automotive qualification, REACH status, lead-free construction, halogen-free status, and conflict-minerals reporting are not stated.

数据核验日期: 2026-11-15 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

bcm5241a1kmlg datasheet BCM5241A1KMLG datasheet pdf BCM5241A1KMLG pinout BCM5241A1KMLG specifications Broadcom BCM5241A1KMLG BCM5241A1KMLG MII PHY BCM5241A1KMLG 10/100 Ethernet BCM5241A1KMLG replacement BCM5241A1KMLG equivalent BCM5241A1KMLG vs BCM5241A1IMLG BCM5241A1KMLG price BCM5241A1KMLG stock BCM5241A1KMLG footprint BCM5241A1KMLG application circuit single port 10/100 Ethernet PHY BCM5241A1KMLG

相关元器件 & 术语

Broadcom Limited BCM5241A1KMLG BCM5241A1IMLG BCM5241A1KML BCM5241A1KMLG-K Ethernet PHY physical-layer transceiver Ethernet interface IC network interface IC single-port transceiver 10BASE-T 100BASE-TX 100BASE-EFX 10 Mb/s 100 Mb/s MII Media Independent Interface Ethernet driver Ethernet receiver 2.5 V 3.3 V 170 mW Ethernet magnetics RoHS Fast Ethernet
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情