Texas Instruments

CD4051BPW - 20V 8:1 CMOS Analog Multiplexer | Texas Instruments

料号: CD4051BPW ✓ 量产中
20 V Vdss 240 ohm Rds(on) 16-pin TSSOP (PW) Package
最小起订量: 1 |

CD4051BPW 概述

The Texas Instruments CD4051BPW is a 20 V, 8:1 CMOS analog multiplexer or demultiplexer in a 16-pin TSSOP package. It provides one multiplexed analog channel, logic-level conversion, and an operating temperature range of -55 °C to 125 °C. The device is designed for routing analog signals among multiple sources or destinations while its address and enable inputs determine the selected path.

An analog multiplexer is a semiconductor switch that connects one common terminal to one of several channel terminals according to binary control signals. The CD4051 belongs to the CD4000 CMOS logic family, combining analog signal switching with digital address control. Its broad supply-voltage range supports legacy and industrial systems, while logic-level conversion helps the address interface operate reliably when the control logic uses a lower voltage than the analog supply.

Key features include an 8:1 multiplexing configuration, a maximum 20 V operating voltage, and a 16-pin TSSOP surface-mount package. The extended -55 °C to 125 °C temperature range supports industrial, instrumentation, telecommunications, and test-equipment environments. The package also offers a compact surface-mount footprint for designs that cannot accommodate a through-hole or larger-outline package.

The CD4051 uses three select inputs to address one of eight internal channels. Its enable input provides common control of the analog switch, allowing the device to be placed in a disabled state when no signal path is required. The address and enable logic operate from the device supply, making system-level design important: control levels, input signal range, and the common-terminal voltage must remain within the operating limits described by the manufacturer datasheet.

Typical uses include data acquisition, sensor-channel selection, analog signal routing, instrumentation, telecommunications, and embedded control systems. It can also function as a demultiplexer when a selected source is distributed through the common terminal. Because the selected path has finite resistance and coupling characteristics, high-speed or low-noise designs should account for on-state resistance, off-state leakage, charge injection, and switching transients.

For layout, place input and output routing so the selected analog path remains short and symmetric. Decoupling capacitors should be connected close to the supply and ground pins, while the address and enable traces should be kept away from sensitive analog nets. The supply must support the full signal range present at the analog terminals, and unused inputs should be tied to defined levels rather than left floating.

This page combines the manufacturer’s part classification, package and temperature information with engineering-focused routing, layout, comparison, and replacement guidance. It also identifies practical limits and qualification questions that should be checked before assigning the CD4051BPW to a new analog switching design.

直接替换替代料: CD4051BPW ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: CD4051BPW (相同外形与封装尺寸) ——差异在于 Package.

Texas Instruments
Package: 16-TSSOP (PW)
对比 CD4051BPW →

CD4051BQPWRQ1

✅ 直接替换
📦 TSSOP-16 (PW)
Same CD4051B function and 16-pin PW footprint; automotive qualification differs by 0 functional parameters and 1 qualification level.

📋 参考替代料(不在目录中)

SN74HC4051PW

✅ 直接替换 ⚠️ 规格未核验
📦 TSSOP-16 (PW)
Same 8:1 function and 16-pin TSSOP footprint; maximum supply voltage is 6 V versus 20 V, a 70% reduction in maximum rating.

📋 参考替代料(不在目录中)

74HC4051PW

✅ 直接替换
📦 TSSOP-16 (PW)
Same 8:1 multiplexing function and 16-pin TSSOP footprint; maximum supply voltage is 6 V versus 20 V, a 70% reduction in maximum rating.

📋 参考替代料(不在目录中)

TMUX1308

✅ 直接替换
📦 TSSOP-16 (PW)
Same 8:1 multiplexing function and 16-pin TSSOP footprint; precision-routing characteristics differ while channel count differs by 0.

📋 参考替代料(不在目录中)

TMUX7208

✅ 直接替换
Texas Instruments
📦 TSSOP-16 (PW)
8:1 Single Channel · 1 · 4 Ω · 5.4 Ω · 3 pC · 4.5 V to 44 V · ±4.5 V to ±22 V · Yes (e.g., VDD=12V, VSS=-5V)

联系询价

查看数据手册 →

CD4051BPW 最大额定值与电气特性

Product Type 8:1 CMOS analog multiplexer or demultiplexer
Maximum Supply Voltage 20 V
Multiplex Configuration 8:1
Number of Switched Channels 1 channel
Logic-Level Conversion Supported
封装 16-pin TSSOP (PW)
安装类型 Surface mount
Minimum Operating Temperature -55 °C
Maximum Operating Temperature 125 °C
On-State Resistance 240 ohm
Number of Select Inputs 3 inputs

CD4051BPW 16-pin tssop (pw) 引脚配置指南

CD4051BPW(16-pin tssop (pw) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

CD4051BPW 的 16-pin tssop (pw) 封装引脚图

暂无详细引脚数据: CD4051BPW.

请参阅 数据手册 以查看完整引脚配置。

典型应用

CD4051BPW 适用于 6 应用s: Multichannel Sensor Acquisition, Data Acquisition Front Ends, Laboratory Signal Routing, Telecommunications Signal Multiplexing, Industrial Control Signal Selection, Legacy Peripheral Signal Routing.

🧩

Multichannel Sensor Acquisition

The CD4051BPW fits sensor-acquisition systems that must connect one analog measurement path to several sensors or conditioning stages. Its three select inputs can address eight channels, while the 240 ohm listed on-state resistance is suitable for many moderate-impedance sensor circuits. The 20 V maximum supply rating also accommodates legacy industrial interfaces. Place the multiplexer close to the sensor inputs, keep the common-terminal route compact, and verify that input bias current, leakage, settling time, and measurement accuracy meet the sensor’s requirements.

📊

Data Acquisition Front Ends

The CD4051BPW can route a selected source into a shared data-acquisition front end when a system must scan multiple analog inputs without using a separate converter channel for every signal. Its 8:1 configuration reduces routing complexity, and the -55 °C to 125 °C operating range supports industrial equipment. The main design trade-off is the 240 ohm on-state resistance, which can create signal attenuation with a high-impedance source. Confirm source impedance, acquisition time, injected charge, and leakage before using the mux in front of a high-resolution converter.

🖥️

Laboratory Signal Routing

The CD4051BPW is useful in laboratory and test systems that route one instrument channel among several test points or stimulus sources. Its three binary address inputs provide deterministic channel selection, while enable control permits the selected path to be disconnected when appropriate. The 16-pin TSSOP package simplifies compact instrument boards. For low-level measurements, however, the listed 240 ohm path resistance and off-state leakage may limit accuracy. Use short PCB routes, guard sensitive nodes from select-line coupling, and evaluate the complete signal path before expecting precision low-noise performance.

🌐

Telecommunications Signal Multiplexing

The CD4051BPW can select or distribute analog paths in telecommunications and interface equipment where several legacy channels must share a common signal route. Its 20 V maximum supply voltage supports higher-voltage interfaces compared with 5 V HC-family devices, while the extended temperature range covers demanding industrial environments. Because the switch resistance and leakage affect channel insertion loss and crosstalk, keep the selected path short and ensure the enable and address pins do not inject transients into sensitive lines. Validate channel isolation against the system’s crosstalk requirement.

🏭

Industrial Control Signal Selection

The CD4051BPW fits industrial control boards that need to select among command, feedback, or reference signals using digital address logic. Its logic-level conversion can assist interface design, and the -55 °C to 125 °C rating supports harsh temperature conditions. The enable input allows the switch network to be disabled during unused intervals. Because 20 V is the maximum supply rating rather than a guaranteed operating point for every analog signal, verify input and common-terminal limits, transient protection, and grounding. Use a defined state for every control input during reset and power-up.

🔧

Legacy Peripheral Signal Routing

The CD4051BPW is appropriate for repairing or modernizing legacy peripheral boards that use a CD4000-style 8:1 analog routing function. The 20 V capability is important when an older circuit operates above the 6 V limits of many HC alternatives. A CD4051BQPWRQ1 offers the same footprint with automotive qualification, while other HC-family devices provide lower-voltage alternatives. Before replacing an installed device, compare the complete pin description and account for differences in logic thresholds, leakage, switch resistance, and power behavior rather than relying on the eight-channel function alone.

推荐产品汇总

CD4051BPW Texas Instruments 用于: Multichannel Sensor Acquisition, Data Acquisition Front Ends, Laboratory Signal Routing, Telecommunications Signal Multiplexing, Industrial Control Signal Selection, Legacy Peripheral Signal Routing CD4051BPWR Tape-and-reel catalog form of the primary device 用于: Multichannel Sensor Acquisition SN74HC4051PW Lower-voltage 8:1 routing alternative 用于: Data Acquisition Front Ends TMUX1308 Precision-routing comparison candidate 用于: Laboratory Signal Routing CD4051BQPWRQ1 Automotive-qualified family variant 用于: Telecommunications Signal Multiplexing TMUX7208 Texas Instruments 用于: Industrial Control Signal Selection 74HC4051PW Lower-voltage system-compatible alternative 用于: Legacy Peripheral Signal Routing
What is the CD4051BPW?
The CD4051BPW is a Texas Instruments 20 V, 8:1 CMOS analog multiplexer or demultiplexer packaged in a 16-pin TSSOP. According to the TI product page, it provides one switched analog channel, logic-level conversion, and an operating temperature range of -55 °C to 125 °C. It routes an analog signal among eight internal channels using three address inputs, with an enable input providing additional control of the selected path.
What is the operating voltage of CD4051BPW?
The CD4051BPW operates with a maximum supply voltage of 20 V, according to the Texas Instruments product classification. The manufacturer datasheet should be consulted for the complete minimum and maximum supply range and for the permitted signal voltages at each analog terminal. The logic-level-conversion feature allows the address interface to be considered separately from the analog signal range.
Where can I download the CD4051BPW datasheet PDF?
The official CD4051BPW product and datasheet information is available on the Texas Instruments product page at https://www.ti.com/product/CD4051B/part-details/CD4051BPW. The page identifies the device as a 20 V, 8:1, single-channel analog multiplexer in the 16-pin TSSOP PW package. Use the manufacturer’s electrical characteristics, pin-description table, and application information when defining the PCB and verifying operating limits.
Where can I find the CD4051BPW pinout?
The CD4051BPW pin assignment is documented in the pin-description table of the Texas Instruments CD4051B manufacturer datasheet. The device uses a 16-pin TSSOP package, designated PW, with pin 1 located according to the standard surface-mount package convention. Use that table when assigning the three select inputs, enable input, supply terminals, common terminal, and eight analog channels so that PCB tracks match the exact device orientation.
What are the key specifications of CD4051BPW that engineers should know?
The principal CD4051BPW specifications are a 20 V maximum supply voltage, an 8:1 analog multiplexing configuration, one switched channel, logic-level conversion, a 16-pin TSSOP package, and operation from -55 °C to 125 °C. The listed distributor classification also identifies 240 ohm on-state resistance. These characteristics place the device in the CD4000 CMOS logic family and define its suitability for analog signal-routing and channel-selection systems.
How does the CD4051BPW address its eight channels?
The CD4051BPW uses three binary select inputs to address one of eight internal analog channels. Its enable input provides common control over the switching function, while the common terminal provides the routed signal path in multiplexer or demultiplexer configurations. The precise truth table and active logic levels must be taken from the manufacturer pin-description and functional diagrams to avoid selecting an unintended channel.
Is CD4051BPW suitable for industrial instrumentation?
The CD4051BPW is suitable for many industrial instrumentation applications because its published operating temperature range extends from -55 °C to 125 °C. Its 20 V maximum supply rating, 240 ohm listed on-state resistance, and logic-level conversion support signal-routing designs spanning legacy control logic and higher-voltage analog systems. Final qualification should also consider noise, switching transients, leakage, and required measurement accuracy.
What can replace the CD4051BPW?
A replacement must use the same 16-pin TSSOP footprint and preserve the CD4051 channel and control arrangement. Candidates identified in the manufacturer and cross-reference discussions include the automotive CD4051BQPWRQ1, SN74HC4051PW, 74HC4051PW, TMUX1308, and TMUX7208. Each candidate requires review of supply range, control thresholds, on-resistance, leakage, switching speed, and power consumption before it is treated as a production drop-in replacement.
What is the best TI drop-in replacement for CD4051BPW?
The CD4051BQPWRQ1 is the closest same-manufacturer candidate identified for the CD4051BPW because it retains the 16-pin TSSOP PW package and the CD4051B function while adding automotive qualification. The automotive qualification is the meaningful distinction rather than an electrical-performance change. Verify the complete pin description, operating limits, qualification grade, and production requirements in the manufacturer documentation before substitution.
Is the SN74HC4051PW the same as the CD4051BPW?
The SN74HC4051PW offers the same 8:1 multiplexing function and 16-pin TSSOP footprint, but it belongs to the HC logic family rather than the CD4000 family. Its maximum supply voltage is 6 V, compared with the CD4051BPW’s 20 V maximum, so it is not an unrestricted functional equivalent for higher-voltage analog rails. It is appropriate when the complete system operates within the HC family’s voltage range and logic thresholds.
CD4051BPW vs TMUX1308 — which is better for precision signal routing?
The TMUX1308 is the better candidate when lower on-state resistance and faster precision routing are required, while the CD4051BPW remains appropriate for legacy 20 V-compatible systems. Their control functions are similar, but their supply ranges, logic thresholds, switching behavior, and electrical ratings differ. Compare the manufacturer data for both devices rather than treating the shared 8:1 function as proof that every analog parameter is equivalent.
When should I choose CD4051BPW instead of TMUX7208?
Choose the CD4051BPW when the design requires compatibility with a 20 V-class supply, established CD4000 CMOS logic behavior, and an existing 16-pin TSSOP footprint. Choose the TMUX7208 when its lower-resistance or switching characteristics better match precision analog routing and the system supply and logic levels remain compatible. The selection should be based on the complete electrical tables rather than package similarity alone.
Is CD4051BPW in stock and what is its lead time?
Current stock, lot availability, and lead time for CD4051BPW should be requested through the Request a Quote form on this page. The manufacturer part page confirms that CD4051BPW is an orderable catalog configuration in the 16-pin TSSOP PW package, but it does not establish a current factory lead time for a selected quantity. Procurement should confirm date code, quantity, packaging, and production schedule before committing the BOM.
Where can I buy CD4051BPW online?
Use the Request a Quote form on this page to request CD4051BPW pricing, stock, minimum order quantity, and lead time. The form provides a direct purchasing path while allowing the quantity and shipment requirements to be matched to the project. Confirm the exact CD4051BPW ordering code, 16-pin PW package, delivery quantity, and any required date-code or traceability requirements with the supplier.
What is the price of CD4051BPW?
The current CD4051BPW price is presented through the Request a Quote form on this page rather than as a static figure. Pricing can depend on order quantity, production status, packaging format, date code, traceability requirements, and market conditions. Submit the required quantity and project details through that form to obtain a current quotation tied to the exact Texas Instruments MPN.
What PCB-layout precautions apply to CD4051BPW?
Keep the routed analog path short and symmetrical, and place the device close to the signal source and destination when switching accuracy matters. Route the three select lines and enable signal away from sensitive analog nets to reduce coupling. Connect the supply-decoupling capacitor close to the device, maintain a low-impedance ground path, and use the manufacturer pin-description table to confirm every physical pin assignment.

工程参考数据: CD4051BPW ——对比、设计指导和合规信息。

选型指南

Choose the CD4051BPW for legacy or industrial designs that require an 8:1 analog multiplexer with a 20 V maximum supply, a 16-pin TSSOP footprint, and operation across the extended -55 °C to 125 °C range. It is particularly suitable when maintaining an existing CD4000-style design, repairing an older board, or controlling moderate-impedance signals where 240 ohm path resistance is acceptable. The CD4051BQPWRQ1 is the preferred same-family choice when automotive qualification is required. SN74HC4051PW or 74HC4051PW may simplify a new design that operates entirely below 6 V, but they are not unrestricted substitutes for higher-voltage rails. TMUX1308 and TMUX7208 are preferable when lower resistance or faster precision switching is more important than CD4000 compatibility. For every candidate, verify pin assignments, control thresholds, signal-range limits, leakage, switching transients, and qualification requirements before releasing the PCB.

与替代料对比

参数 本产品 CD4051BQPWRQ1 SN74HC4051PW 74HC4051PW TMUX1308 TMUX7208
Package TSSOP-16 (PW) TSSOP-16 (PW) TSSOP-16 (PW) TSSOP-16 (PW) TSSOP-16 (PW) TSSOP-16 (PW)
Brand Texas Instruments Texas Instruments Texas Instruments NXP Texas Instruments Texas Instruments
Multiplex Configuration 8:1 8:1 8:1 8:1 8:1 8:1
Number of Switched Channels 1 channel 1 channel 1 channel 1 channel 1 channel 1 channel
Select Input Count 3 inputs 3 inputs 3 inputs 3 inputs 3 inputs 3 inputs

关键差异点

  • Supports higher-voltage systems than HC-family alternatives (对比 74HC4051PW)
  • Offers an automotive-qualified same-family option (对比 CD4051BQPWRQ1)
  • Maintains the established CD4000 multiplexing architecture (对比 TMUX7208)

设计说明

Route the common terminal and the selected channel directly to the intended signal destination with short traces and a continuous ground reference. Keep the three select inputs and enable control away from high-impedance analog nodes to reduce crosstalk through capacitive coupling. Place the supply-decoupling capacitor adjacent to the supply and ground pins, and use the manufacturer pin-description table to confirm orientation before assigning tracks.

Account for the listed 240 ohm on-state resistance when the source impedance is high. Estimated insertion loss can be calculated as 20·log10[(Rsource + 240 ohm)/(Rsource + 240 ohm + RL)], using the actual source impedance and load impedance. Include off-state leakage and injected charge when evaluating low-level or high-speed measurements, and verify settling time rather than assuming channel changes occur instantaneously.

Do not treat the 20 V maximum supply rating as permission to apply 20 V to every analog or control terminal. Check the complete absolute-maximum and recommended-operation tables, especially common-terminal voltage, select-input thresholds, and enable levels. Drive address and enable inputs with defined levels during reset and power-up, and confirm that the external circuit cannot back-power the device through the analog pins.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The CD4051BPW manufacturer product page and distributor classifications do not state the requested compliance statuses. The CD4051BQPWRQ1 alternative is identified as automotive, but the standard CD4051BPW qualification status remains unconfirmed.

数据核验日期: 2026-11-10 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

CD4051BPW datasheet CD4051BPW datasheet pdf CD4051BPW pinout CD4051BPW specifications CD4051BPW schematic CD4051BPW equivalent CD4051BPW replacement CD4051BPW cross reference CD4051BPW vs TMUX7208 CD4051BPW TSSOP-16 footprint CD4051BPW analog multiplexer application CD4051BPW price CD4051BPW stock Texas Instruments CD4051BPW

相关元器件 & 术语

Texas Instruments CD4051BPW CD4051B CD4051BQPWRQ1 SN74HC4051PW 74HC4051PW TMUX1308 TMUX7208 analog multiplexer analog demultiplexer CD4000 CMOS logic CMOS logic-level conversion 8:1 multiplexer TSSOP-16 TSSOP family surface mount SMD package on-state resistance channel selection select input enable input data acquisition sensor multiplexing industrial instrumentation
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情