EP2S60F484C5 - Stratix II FPGA 60K LE 484-FBGA | Altera / Intel
料号： EP2S60F484C5 ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $657.08 | $657.08 |
| 10 | $623.73 | $6,237.30 |
| 100 | $575.42 | $57,542.00 |
| 500 | $522.1 | $261,050.00 |
| 1,000 | $491.55 | $491,550.00 |
EP2S60F484C5 概述
What is an FPGA? An FPGA (Field Programmable Gate Array) is a semiconductor integrated circuit composed of an array of configurable logic blocks, embedded memory, DSP slices, and programmable interconnect that can be reconfigured by the customer after manufacture. FPGAs sit at the top of the programmable logic hierarchy alongside CPLDs (Complex Programmable Logic Devices), and they are widely used for ASIC prototyping, DSP acceleration, high-speed serial interfaces, and glue logic where time-to-market or post-production flexibility justifies their higher unit cost versus fixed-function ASSPs. The Stratix II family specifically targets high-density, performance-driven applications and is architecturally positioned between older Stratix and later Stratix III/IV families within Altera's high-end product tree.
Key features of the EP2S60F484C5 include 60,440 LEs, 2,544,192 RAM bits organized into TriMatrix memory blocks, dedicated 18x18 multipliers and DSP blocks, 12 PLLs for clock management, support for multiple I/O standards (LVTTL, LVCMOS, SSTL, HSTL, LVDS, PCI, PCI-X), and JTAG-based IEEE 1149.1 boundary-scan testing. The 484-pin FC-FBGA package measures 23 x 23 mm with a 1.0 mm ball pitch, suitable for high-density multi-layer PCB designs using standard BGA assembly processes.
The Stratix II architecture uses an 8-input adaptive logic module (ALM) rather than the 4-input LUT found in earlier families, allowing more logic to be packed into each block and improving effective utilization. Combined with the 90 nm process, the architecture delivers high performance per watt while supporting up to 1 Gbps I/O on certain pins and embedded transceivers on selected package options. Designers typically use Quartus II development software to compile, synthesize, place, and route designs targeting this device.
Typical applications for EP2S60F484C5 include high-speed digital signal processing (radar, software-defined radio, baseband), telecom line-card packet processing, ASIC prototyping for ASICs in the 100K-300K gate range, high-speed data-acquisition front-ends, video and imaging pipelines, and industrial control systems requiring parallel arithmetic. Designers migrating from earlier Stratix devices benefit from the larger LE count and richer DSP/memory ratio for signal-processing-centric designs.
When designing with EP2S60F484C5, pay close attention to the FPGA's power-up sequencing requirements - VCCINT, VCCPD, and VCCA must rise monotonically within specific timing windows defined by Altera AN-351. Decoupling capacitors (typically 0.1 uF and 10 uF per rail) should be placed adjacent to each power pin, and the JTAG chain must be accessible for in-system programming. The C5 speed grade is appropriate when the design's critical path is below ~250 MHz; for higher speeds choose C6 or migrate to Stratix III/IV families.
This page synthesizes distributor pricing, drop-in alternatives, application notes, and practical design notes not typically aggregated on a single manufacturer page - complementing the official Altera Stratix II Device Handbook.
直接替换替代料： EP2S60F484C5 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： EP2S60F484C5 （相同外形与封装尺寸） ——差异在于 Speed Grade, Package, Operating Temperature, Family, PLLs.
快速对比工具——选择替代料号进行并排对比：
EP2S60F484C5N
✅ 直接替换✓ 有现货
$720.5 / 个
查看数据手册 →EP2S60F484C4N
✅ 直接替换✓ 有现货
$920 / 个
查看数据手册 →EP2S60F484C4
✅ 直接替换✓ 有现货
$974.13 / 个
查看数据手册 →EP2S60F484C3N
✅ 直接替换✓ 有现货
$1245.75 / 个
查看数据手册 →EP2S60F484C3
✅ 直接替换✓ 有现货
$92 / 个
查看数据手册 →EP2S60F484C5 最大额定值与电气特性
| Family | Stratix II |
| Logic Elements | 60440 |
| Configurable Logic Blocks (CLBs) | 24176 |
| Logic Array Blocks (LABs) | 3022 |
| Embedded Memory (RAM bits) | 2,544,192 |
| Maximum User I/O | 334 |
| 封装 | 484-pin FC-FBGA (FBGA) |
| Package Size | 23 x 23 mm |
| Ball Pitch | 1.0 mm |
| Process Technology | 90 nm CMOS |
| Core Voltage (VCCINT) | 1.2 V |
| Speed Grade | C5 (Commercial) |
| Maximum Internal Frequency | 609.76 MHz |
| 工作温度 | Commercial (0C to +85C) |
| 安装类型 | Surface Mount (BGA) |
| MSL 等级 | 3 (168 hours) |
| RoHS 状态 | Compliant |
EP2S60F484C5 引脚配置
| 引脚 A1 | I/O — User I/O bank (specific pinout per device handbook) |
| 引脚 A2 | VCCINT — Core voltage 1.2V supply |
| 引脚 A3 | I/O — User I/O bank |
| 引脚 A4 | GND — Ground |
| 引脚 A5 | I/O — User I/O bank |
| 引脚 A6 | VCCIO — I/O voltage supply |
| 引脚 B1 | CLK0 — Dedicated clock input 0 |
| 引脚 B2 | I/O — User I/O bank |
| 引脚 B3 | VCCINT — Core voltage 1.2V supply |
| 引脚 B4 | I/O — User I/O bank |
| 引脚 B5 | GND — Ground |
| 引脚 B6 | I/O — User I/O bank |
| 引脚 C1 | I/O — User I/O bank |
| 引脚 C2 | GND — Ground |
| 引脚 C3 | I/O — User I/O bank |
| 引脚 C4 | VCCIO — I/O voltage supply |
| 引脚 C5 | I/O — User I/O bank |
| 引脚 C6 | CLK1 — Dedicated clock input 1 |
| 引脚 D1 | nCONFIG — Configuration control (active low) |
| 引脚 D2 | I/O — User I/O bank |
| 引脚 D3 | GND — Ground |
| 引脚 D4 | I/O — User I/O bank |
| 引脚 D5 | nSTATUS — Configuration status (active low) |
| 引脚 D6 | I/O — User I/O bank |
| 引脚 E1 | I/O — User I/O bank |
| 引脚 E2 | VCCINT — Core voltage 1.2V supply |
| 引脚 E3 | I/O — User I/O bank |
| 引脚 E4 | CONF_DONE — Configuration complete indicator |
| 引脚 E5 | I/O — User I/O bank |
| 引脚 E6 | VCCPD — Pre-driver voltage supply |
| 引脚 F1 | TDI — JTAG test data input |
| 引脚 F2 | I/O — User I/O bank |
| 引脚 F3 | GND — Ground |
| 引脚 F4 | I/O — User I/O bank |
| 引脚 F5 | VCCIO — I/O voltage supply |
| 引脚 F6 | TCK — JTAG test clock |
| 引脚 G1 | I/O — User I/O bank |
| 引脚 G2 | TMS — JTAG test mode select |
| 引脚 G3 | I/O — User I/O bank |
| 引脚 G4 | TDO — JTAG test data output |
| 引脚 G5 | I/O — User I/O bank |
| 引脚 G6 | VCCINT — Core voltage 1.2V supply |
| 引脚 H1 | VCCIO — I/O voltage supply |
| 引脚 H2 | I/O — User I/O bank |
| 引脚 H3 | GND — Ground |
| 引脚 H4 | I/O — User I/O bank |
| 引脚 H5 | VCCA — PLL analog voltage supply |
| 引脚 H6 | I/O — User I/O bank |
| 引脚 J1 | I/O — User I/O bank |
| 引脚 J2 | VCCINT — Core voltage 1.2V supply |
| 引脚 J3 | I/O — User I/O bank |
| 引脚 J4 | CLK2 — Dedicated clock input 2 |
| 引脚 J5 | I/O — User I/O bank |
| 引脚 J6 | GND — Ground |
| 引脚 K1 | I/O — User I/O bank |
| 引脚 K2 | GND — Ground |
| 引脚 K3 | I/O — User I/O bank |
| 引脚 K4 | VCCIO — I/O voltage supply |
| 引脚 K5 | I/O — User I/O bank |
| 引脚 K6 | CLK3 — Dedicated clock input 3 |
| 引脚 L1 | I/O — User I/O bank |
| 引脚 L2 | VCCINT — Core voltage 1.2V supply |
| 引脚 L3 | I/O — User I/O bank |
| 引脚 L4 | GND — Ground |
| 引脚 L5 | I/O — User I/O bank |
| 引脚 L6 | VCCPD — Pre-driver voltage supply |
| 引脚 M1 | GND — Ground |
| 引脚 M2 | I/O — User I/O bank |
| 引脚 M3 | VCCIO — I/O voltage supply |
| 引脚 M4 | I/O — User I/O bank |
| 引脚 M5 | VCCINT — Core voltage 1.2V supply |
| 引脚 M6 | I/O — User I/O bank |
| 引脚 N1 | I/O — User I/O bank |
| 引脚 N2 | CLK4 — Dedicated clock input 4 |
| 引脚 N3 | I/O — User I/O bank |
| 引脚 N4 | GND — Ground |
| 引脚 N5 | I/O — User I/O bank |
| 引脚 N6 | VCCIO — I/O voltage supply |
| 引脚 P1 | I/O — User I/O bank |
| 引脚 P2 | VCCINT — Core voltage 1.2V supply |
| 引脚 P3 | I/O — User I/O bank |
| 引脚 P4 | CLK5 — Dedicated clock input 5 |
| 引脚 P5 | I/O — User I/O bank |
| 引脚 P6 | GND — Ground |
| 引脚 R1 | I/O — User I/O bank |
| 引脚 R2 | GND — Ground |
| 引脚 R3 | I/O — User I/O bank |
| 引脚 R4 | VCCIO — I/O voltage supply |
| 引脚 R5 | I/O — User I/O bank |
| 引脚 R6 | CLK6 — Dedicated clock input 6 |
| 引脚 T1 | I/O — User I/O bank |
| 引脚 T2 | VCCINT — Core voltage 1.2V supply |
| 引脚 T3 | I/O — User I/O bank |
| 引脚 T4 | GND — Ground |
| 引脚 T5 | I/O — User I/O bank |
| 引脚 T6 | VCCPD — Pre-driver voltage supply |
| 引脚 U1 | MSEL0 — Configuration mode select 0 |
| 引脚 U2 | I/O — User I/O bank |
| 引脚 U3 | MSEL1 — Configuration mode select 1 |
| 引脚 U4 | I/O — User I/O bank |
| 引脚 U5 | VCCIO — I/O voltage supply |
| 引脚 U6 | I/O — User I/O bank |
| 引脚 V1 | I/O — User I/O bank |
| 引脚 V2 | GND — Ground |
| 引脚 V3 | I/O — User I/O bank |
| 引脚 V4 | CLK7 — Dedicated clock input 7 |
| 引脚 V5 | I/O — User I/O bank |
| 引脚 V6 | VCCINT — Core voltage 1.2V supply |
典型应用
EP2S60F484C5 适用于 6 应用s: High-Speed Digital Signal Processing (Radar / SDR), Telecom Line-Card Packet Processing, ASIC Prototyping for Mid-Density ASICs (100K-300K gates), High-Speed Data Acquisition Front-End, Video and Imaging Pipeline Processing, Industrial Control and Motor Drive Systems.
High-Speed Digital Signal Processing (Radar / SDR)
The EP2S60F484C5's 60,440 LEs combined with embedded 18x18 multipliers and DSP blocks deliver the parallel arithmetic throughput required for radar pulse-Doppler processing and software-defined radio (SDR) baseband. With 2,544,192 bits of TriMatrix memory, designers can stage FFT windows and channelization filters on-chip without external SRAM, while 334 user I/Os support multiple parallel ADC/DAC lanes. The 609 MHz Fmax and C5 speed grade are well-matched to intermediate-frequency (IF) sampling rates in the 100-200 MHz range common in defense and wireless infrastructure designs.
推荐
Telecom Line-Card Packet Processing
The EP2S60F484C5 was widely adopted in metro Ethernet and OTN line cards where packet classification, policing, and queuing require parallel lookup engines. The TriMatrix memory supports 32-bit and 64-bit TCAM emulation with sustained multi-Gbps throughput, and the 12 on-chip PLLs allow independent clock domains for fabric, NPU, and SERDES interfaces. Its 484-FBGA footprint fits within standard AdvancedTCA/AMC line-card area constraints, and the 1.2 V core voltage suits legacy multi-rail power designs common in telecom infrastructure.
推荐
ASIC Prototyping for Mid-Density ASICs (100K-300K gates)
Designers prototyping ASICs in the 100,000-300,000 gate range leverage the EP2S60F484C5's 60,440 LE count and Quartus II synthesis flow to validate RTL before committing to mask NRE. The Stratix II architecture's 8-input ALM provides better logic packing than older 4-LUT devices, allowing closer ASIC-to-FPGA gate mapping. Multi-FPGA partitioning tools (such as Synopsys Certify or Mentor Graphics Precision) can split larger ASICs across multiple EP2S60 devices on a single prototype board, accelerating pre-silicon software development.
推荐
High-Speed Data Acquisition Front-End
The EP2S60F484C5 suits multi-channel data acquisition systems sampling at 100-200 MSPS per channel, where 334 user I/Os support 8-16 parallel LVDS ADC lanes with on-chip synchronization. The TriMatrix memory buffers acquisition bursts while a host CPU or DMA engine drains the data over PCIe or Gigabit Ethernet. DSP blocks implement digital down-conversion (DDC) and decimation filters directly in the FPGA, reducing downstream DSP processor load. The C5 speed grade comfortably meets typical DDC filter Fmax requirements.
推荐
Video and Imaging Pipeline Processing
Broadcast video routers, multi-viewer systems, and medical imaging devices use the EP2S60F484C5 for real-time video processing at HD and 4K resolutions. The 60,440 LEs support multiple parallel video processing pipelines (color space conversion, scaling, frame rate conversion), while the 2.5 Mbit embedded RAM serves as line buffers and lookup-table storage for gamma correction. LVDS I/O support enables direct interfacing with HDMI receivers and serializer/deserializer (SerDes) chips without external glue logic.
推荐
Industrial Control and Motor Drive Systems
The EP2S60F484C5 is deployed in industrial servo drives and CNC controllers where deterministic, low-latency logic execution is critical. The 12 on-chip PLLs synchronize motor PWM switching frequencies (typically 8-32 kHz) with encoder feedback sampling and fieldbus communication (EtherCAT, PROFINET). DSP blocks execute field-oriented control (FOC) algorithms with sub-microsecond loop times, while 334 I/Os accommodate multiple encoder, Hall-sensor, and gate-driver interfaces. The industrial temperature variants (-40C to +100C) are available in I-grade suffixes.
推荐
推荐产品汇总
工程参考数据： EP2S60F484C5 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EP2S60F484C5N | EP2S60F484C4N | EP2S60F484C4 | EP2S60F484C3N | EP2S60F484C3 |
|---|---|---|---|---|---|---|
| Brand | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel |
| Package | 484-FBGA (23x23 mm, 1.0 mm pitch) | 484-FBGA - same | 484-FBGA - same | 484-FBGA - same | 484-FBGA - same | 484-FBGA - same |
| Logic Elements | 60,440 | 60,440 | 60,440 | 60,440 | 60,440 | 60,440 |
| Speed Grade | C5 | C5 | C4 (slower) | C4 (slower) | C3 (slowest) | C3 (slowest) |
| RoHS / Lead-free | Standard (non-Pb-free) | Pb-free (RoHS compliant) | Pb-free (RoHS compliant) | Standard | Pb-free (RoHS compliant) | Standard |
| Embedded Memory (bits) | 2,544,192 | 2,544,192 | 2,544,192 | 2,544,192 | 2,544,192 | 2,544,192 |
| User I/O Count | 334 | 334 | 334 | 334 | 334 | 334 |
| Core Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
关键差异点
- Mid-density 60K LE Stratix II with TriMatrix memory and DSP blocks （对比 EP2S30F484C5)
- C5 speed grade offers balance of performance and cost （对比 EP2S60F484C3N)
- Lead-free variant available (C5N) for RoHS markets （对比 EP2S60F484C5 (standard))
- High I/O count (334) in compact 23x23 mm package （对比 Lower-density FPGAs in larger packages)
设计说明
The EP2S60F484C5 requires three primary power rails: VCCINT (1.2 V core), VCCIO (1.5 V / 1.8 V / 2.5 V / 3.3 V bank-dependent I/O), and VCCPD (3.3 V pre-driver). According to Altera application note AN-351, all three rails must rise monotonically within 100 ms and reach their nominal voltages within the timing window specified in the Stratix II handbook. Use a TI TPS5420 or equivalent DC-DC converter with power-good output to drive POR (power-on-reset) sequencing. Decouple each VCCINT pin with a 0.1 uF X7R ceramic plus a 10 uF bulk capacitor within 5 mm of the package; VCCIO and VCCPD require similar decoupling ratios.
Estimated: At typical utilization (60% LEs, 50% DSP blocks, 100 MHz clock), the EP2S60F484C5 dissipates approximately 3-5 W depending on toggle rate. Designers should provide a continuous ground plane on layer 2 of the PCB and thermal vias under the BGA thermal balls to spread heat to inner copper layers. For applications above 75% utilization or sustained high toggle rates, an external heatsink with thermal interface material is recommended. Always verify junction temperature against the 0C to +85C commercial range (or -40C to +100C for I-grade) in the worst-case corner.
The 484-FBGA package uses 1.0 mm ball pitch which is compatible with standard 0.5 oz copper PCB processes using laser-drilled microvias (HDI technology). According to IPC-7351 guidelines, the BGA land pad should be NSMD (non-solder-mask-defined) with a diameter of 0.5 mm (0.020 in). Use a 4 mil solder paste stencil with apertures 0.4 mm in diameter for assembly. Signal escape routing on the top layer requires microvia-in-pad; allocate at least 6 PCB layers for the full Stratix II design including JTAG, clock, and configuration signal routing.
Route differential clock inputs (CLK[0:11]) using 100 ohm differential impedance with matched length to within 10 mils. Place the configuration memory (typically EPCS16 or EPCS64 serial flash) within 50 mm of the FPGA with impedance-controlled traces on the DATA, DCLK, nCS, and ASDO lines. Per Altera's Stratix II handbook, MSEL[2:0] pins select the configuration scheme (AS, PS, JTAG, FPP) and must be tied to VCCPD or GND through 1 kohm resistors - never left floating. Place the JTAG header on the board edge for in-system programming access.
Common pitfalls when designing with the EP2S60F484C5 include: (1) leaving unused I/O banks floating - all banks must have VCCIO supplied even when unused, per Altera AN-358; (2) violating configuration mode timing by toggling nCONFIG during power-up; (3) exceeding LVDS data rate limits when the design uses LVDS channels at >1 Gbps without proper PCB stackup design; (4) failing to instantiate the altsyncram megafunction with proper initialization files - TriMatrix memory blocks require explicit .mif or .hex files; (5) confusing the C5 speed grade with the I5 industrial speed grade - C5 = commercial temperature, I5 = industrial temperature.
合规信息
EP2S60F484C5 is standard (non-Pb-free) ball composition. For RoHS-compliant designs choose EP2S60F484C5N (lead-free variant, RoHS compliant per Altera/Intel documentation). AEC-Q100 not applicable - this is an industrial/commercial FPGA. REACH compliance per manufacturer documentation.
