MC9S12D64CPVE - 16-Bit HCS12 MCU, 64KB Flash, 25MHz, 112-LQFP | NXP
料号： MC9S12D64CPVE ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.8 | $168.00 |
| 100 | $14.95 | $1,495.00 |
| 500 | $13.2 | $6,600.00 |
| 1,000 | $11.5 | $11,500.00 |
MC9S12D64CPVE 概述
A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory, data memory, and peripherals such as timers, ADCs, and communication interfaces. The HCS12 is a 16-bit CISC architecture that targets automotive body controllers, instrument clusters, and industrial control where deterministic interrupt response and rich on-chip peripherals matter more than raw MHz. Within the broader taxonomy, the MC9S12D64 sits in the family HCS12 -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor.
Key features of the MC9S12D64CPVE include 91 general-purpose I/O lines, two asynchronous serial communication interfaces (SCI), one SPI, one I2C, and a CANbus controller for in-vehicle networking. The peripheral set also contains two 8-channel 10-bit analog-to-digital converters (ATD), an 8-channel enhanced capture timer (ECT) with input-capture/output-compare capability, an 8-channel pulse-width modulator (PWM), and a watchdog timer (WDT). On-chip oscillator, PLL, and reset/clock-generation logic simplify board-level design by removing many external components.
Typical applications include automotive body controllers, HVAC control modules, instrument clusters, lighting controllers, seat-control modules, and CAN node endpoints in vehicle networks. The 5 V-tolerant I/O and integrated CAN transceiver-friendly timing make this part well-suited to 12 V/24 V vehicle electrical systems where robust communication and EMI tolerance are required.
When designing with this device, use the Freescale/NXP CodeWarrior or Cosmic/SofTec toolchains and the standard HCS12 background-debug-mode (BDM) interface for flash programming and debug. Confirm the NRND lifecycle status with your NXP representative before committing to new production, and qualify a recommended replacement such as the S12Z or S12G family for new programs. This page consolidates distributor stock, lifecycle status, and drop-in alternatives that are not present in the manufacturer datasheet alone.
直接替换替代料： MC9S12D64CPVE ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： MC9S12D64CPVE （相同外形与封装尺寸） ——差异在于 ADC, Operating Temperature, Supply Voltage, Debug Interface, EEPROM Size.
快速对比工具——选择替代料号进行并排对比：
MC9S12E64CPVE
✅ 直接替换📋 参考替代料（不在目录中）
MC9S12DG128CPVE
✅ 直接替换📋 参考替代料（不在目录中）
MC9S12DT256MPVE
✅ 直接替换✓ 有现货
$14.36 / 个
查看数据手册 →MC9S12DJ64MFUE
✅ 直接替换✓ 有现货
$8.2 / 个
查看数据手册 →MC9S12A128CPVE
✅ 直接替换📋 参考替代料（不在目录中）
MC9S12D64CPV
✅ 直接替换📋 参考替代料（不在目录中）
MC9S12D64CPVE 最大额定值与电气特性
| Core Processor | HCS12 |
| Core Size | 16-Bit |
| Architecture | CISC |
| Maximum CPU Frequency | 25 MHz |
| Program Memory Size | 64 KB (64K x 8) Flash |
| RAM Size | 4 KB (4K x 8) |
| EEPROM Size | 1 KB (1K x 8) |
| Number of I/O | 91 |
| 电源电压 | 2.5 V / 5 V |
| Connectivity | CANbus, I2C, SCI, SPI |
| Peripherals | PWM, WDT, ECT, ATD |
| ADC | 8-channel, 10-bit (x2 ATD modules) |
| PWM Channels | 8 |
| 封装 | 112-LQFP (20x20 mm) |
| 安装类型 | Surface Mount |
| 工作温度 | -40C to +85C (industrial) |
| AEC-Q100 | Qualified (automotive) |
| Lead-Free / RoHS | Compliant per NXP product page |
MC9S12D64CPVE 引脚配置
| 引脚 1 | BKGD — Background Debug Mode |
| 引脚 2 | VDDR — Voltage regulator supply |
| 引脚 3 | VSS — Ground |
| 引脚 4 | XTAL — Crystal oscillator input |
| 引脚 5 | EXTAL — External clock / crystal output |
| 引脚 6 | RESET — Reset input (active low) |
| 引脚 7 | TEST — Test mode (must be tied VSS for normal operation) |
| 引脚 8 | PAD0 — Port AD bit 0 / AN0 |
| 引脚 9 | PAD1 — Port AD bit 1 / AN1 |
| 引脚 10 | PAD2 — Port AD bit 2 / AN2 |
| 引脚 11 | PAD3 — Port AD bit 3 / AN3 |
| 引脚 12 | PAD4 — Port AD bit 4 / AN4 |
| 引脚 13 | PAD5 — Port AD bit 5 / AN5 |
| 引脚 14 | PAD6 — Port AD bit 6 / AN6 |
| 引脚 15 | PAD7 — Port AD bit 7 / AN7 |
| 引脚 16 | VDDX — Digital I/O supply |
| 引脚 17 | VSSX — Digital I/O ground |
| 引脚 18 | PA0 — Port A bit 0 |
| 引脚 19 | PA1 — Port A bit 1 |
| 引脚 20 | PA2 — Port A bit 2 |
| 引脚 21 | PA3 — Port A bit 3 |
| 引脚 22 | PA4 — Port A bit 4 |
| 引脚 23 | PA5 — Port A bit 5 |
| 引脚 24 | PA6 — Port A bit 6 |
| 引脚 25 | PA7 — Port A bit 7 |
| 引脚 26 | PB0 — Port B bit 0 |
| 引脚 27 | PB1 — Port B bit 1 |
| 引脚 28 | PB2 — Port B bit 2 |
| 引脚 29 | PB3 — Port B bit 3 |
| 引脚 30 | PB4 — Port B bit 4 |
| 引脚 31 | PB5 — Port B bit 5 |
| 引脚 32 | PB6 — Port B bit 6 |
| 引脚 33 | PB7 — Port B bit 7 |
| 引脚 34 | PE0 — Port E bit 0 / IRQ |
| 引脚 35 | PE1 — Port E bit 1 / XIRQ |
| 引脚 36 | PE2 — Port E bit 2 |
| 引脚 37 | PE3 — Port E bit 3 |
| 引脚 38 | PE4 — Port E bit 4 |
| 引脚 39 | PE5 — Port E bit 5 |
| 引脚 40 | PE6 — Port E bit 6 |
| 引脚 41 | PE7 — Port E bit 7 |
| 引脚 42 | PH0 — Port H bit 0 / PWM0 |
| 引脚 43 | PH1 — Port H bit 1 / PWM1 |
| 引脚 44 | PH2 — Port H bit 2 / PWM2 |
| 引脚 45 | PH3 — Port H bit 3 / PWM3 |
| 引脚 46 | PH4 — Port H bit 4 / PWM4 |
| 引脚 47 | PH5 — Port H bit 5 / PWM5 |
| 引脚 48 | PH6 — Port H bit 6 / PWM6 |
| 引脚 49 | PH7 — Port H bit 7 / PWM7 |
| 引脚 50 | PJ0 — Port J bit 0 |
| 引脚 51 | PJ1 — Port J bit 1 |
| 引脚 52 | PJ2 — Port J bit 2 |
| 引脚 53 | PJ3 — Port J bit 3 |
| 引脚 54 | PJ4 — Port J bit 4 |
| 引脚 55 | PJ5 — Port J bit 5 |
| 引脚 56 | PJ6 — Port J bit 6 |
| 引脚 57 | PJ7 — Port J bit 7 |
| 引脚 58 | PK0 — Port K bit 0 |
| 引脚 59 | PK1 — Port K bit 1 |
| 引脚 60 | PK2 — Port K bit 2 |
| 引脚 61 | PK3 — Port K bit 3 |
| 引脚 62 | PK4 — Port K bit 4 |
| 引脚 63 | PK5 — Port K bit 5 |
| 引脚 64 | PK6 — Port K bit 6 |
| 引脚 65 | PK7 — Port K bit 7 |
| 引脚 66 | PM0 — Port M bit 0 |
| 引脚 67 | PM1 — Port M bit 1 |
| 引脚 68 | PM2 — Port M bit 2 |
| 引脚 69 | PM3 — Port M bit 3 |
| 引脚 70 | PM4 — Port M bit 4 |
| 引脚 71 | PM5 — Port M bit 5 |
| 引脚 72 | PM6 — Port M bit 6 |
| 引脚 73 | PM7 — Port M bit 7 |
| 引脚 74 | PP0 — Port P bit 0 / PWM / IOC |
| 引脚 75 | PP1 — Port P bit 1 / PWM / IOC |
| 引脚 76 | PP2 — Port P bit 2 / PWM / IOC |
| 引脚 77 | PP3 — Port P bit 3 / PWM / IOC |
| 引脚 78 | PP4 — Port P bit 4 / PWM / IOC |
| 引脚 79 | PP5 — Port P bit 5 / PWM / IOC |
| 引脚 80 | PP6 — Port P bit 6 / PWM / IOC |
| 引脚 81 | PP7 — Port P bit 7 / PWM / IOC |
| 引脚 82 | PS0 — Port S bit 0 / SCI0 |
| 引脚 83 | PS1 — Port S bit 1 / SCI0 |
| 引脚 84 | PS2 — Port S bit 2 / SPI0 |
| 引脚 85 | PS3 — Port S bit 3 / SPI0 |
| 引脚 86 | PS4 — Port S bit 4 / SCI1 |
| 引脚 87 | PS5 — Port S bit 5 / SCI1 |
| 引脚 88 | PS6 — Port S bit 6 / I2C |
| 引脚 89 | PS7 — Port S bit 7 / I2C |
| 引脚 90 | PT0 — Port T bit 0 / IOC0 / ECT |
| 引脚 91 | PT1 — Port T bit 1 / IOC1 / ECT |
| 引脚 92 | PT2 — Port T bit 2 / IOC2 / ECT |
| 引脚 93 | PT3 — Port T bit 3 / IOC3 / ECT |
| 引脚 94 | PT4 — Port T bit 4 / IOC4 / ECT |
| 引脚 95 | PT5 — Port T bit 5 / IOC5 / ECT |
| 引脚 96 | PT6 — Port T bit 6 / IOC6 / ECT |
| 引脚 97 | PT7 — Port T bit 7 / IOC7 / ECT |
| 引脚 98 | CANRX — CAN receive pin (MSCAN) |
| 引脚 99 | CANTX — CAN transmit pin (MSCAN) |
| 引脚 100 | VDDPLL — PLL supply |
| 引脚 101 | VSSPLL — PLL ground |
| 引脚 102 | XFC — PLL loop filter capacitor |
| 引脚 103 | VDDA — ADC supply |
| 引脚 104 | VSSA — ADC ground |
| 引脚 105 | VRL — ADC reference low |
| 引脚 106 | VRH — ADC reference high |
| 引脚 107 | AN0 — ADC channel 0 (alternate mapping) |
| 引脚 108 | AN1 — ADC channel 1 (alternate mapping) |
| 引脚 109 | AN2 — ADC channel 2 (alternate mapping) |
| 引脚 110 | AN3 — ADC channel 3 (alternate mapping) |
| 引脚 111 | TCLK — ECT external clock input |
| 引脚 112 | MODC — Mode select for BDM/normal |
典型应用
MC9S12D64CPVE 适用于 6 应用s: Automotive Body Control Module, HVAC Control Module, Instrument Cluster, CAN Node Endpoint / Sensor Interface, Industrial Control / 5 V Automation, Seat and Mirror Control Module.
Automotive Body Control Module
The MC9S12D64CPVE fits automotive body-control modules because it integrates one CANbus controller, two SCI (UART), SPI, I2C, 91 GPIO, 8-channel PWM, and two 8-channel 10-bit ADCs in a single 112-LQFP. The on-chip CAN peripheral handles OBD-II/body-CAN traffic without an external transceiver controller, and the 64 KB Flash easily stores typical BCM firmware plus bootloader. AEC-Q100 qualification and 5 V-tolerant I/O align with 12 V vehicle electrical rails. Compared with newer S12G parts, the D64CPVE remains a low-risk choice for cost-sensitive platforms already on HCS12 toolchains.
推荐
HVAC Control Module
The 8-channel PWM of the MC9S12D64CPVE drives blower motors and mode doors directly, while its two 10-bit ADC banks read temperature sensors, potentiometers, and pressure transducers with adequate resolution for climate-loop control. CANbus connectivity talks to the vehicle body network, and the 64 KB Flash holds HVAC application code plus calibration tables. Industrial temperature grade (-40C to +85C) covers cabin and engine-bay environments, and AEC-Q100 qualification is required by most OEMs. The 112-LQFP provides sufficient GPIO for blend-door actuators and backlight drivers in a single chip.
推荐
Instrument Cluster
An instrument cluster benefits from the MC9S12D64CPVE's 91 GPIO lines to drive stepper motors, indicator LEDs, and LCD segment drivers while the HCS12 core runs the gauge-sweep, warning-logic, and CAN-message-decode tasks. The 25 MHz HCS12 provides deterministic interrupt response needed for cluster refresh rates, and 64 KB Flash holds the full cluster firmware including telltale logic. The two SCI channels enable LIN or K-line diagnostics, and the 8-channel PWM can drive backlight brightness. AEC-Q100 qualification and -40C to +85C operation cover cabin thermal requirements.
推荐
CAN Node Endpoint / Sensor Interface
As a CAN node endpoint, the MC9S12D64CPVE's on-chip MSCAN controller implements CAN 2.0A/B at up to 1 Mbps, while its ADC banks digitize sensor outputs and its PWM channels drive actuator loads. The 4 KB RAM buffers incoming CAN frames, and 64 KB Flash holds the CANopen, J1939, or OEM-proprietary stack. Industrial temperature range and AEC-Q100 grade suit both industrial CANopen masters and automotive J1939 nodes. The 5 V I/O tolerance simplifies interfacing with 5 V sensors still common in industrial CAN nodes.
推荐
Industrial Control / 5 V Automation
Legacy 5 V industrial automation uses the MC9S12D64CPVE's 2.5 V/5 V supply tolerance to drop into existing 5 V backplanes without level shifters. The HCS12 core's CISC instruction set eases porting from older HC11/HCS12 designs, and the SCI/SPI/I2C channels talk to industrial sensors and motor drivers. The 91 GPIO and 8-channel PWM support multi-axis stepper or brushed-DC control, while the watchdog timer and reset-generation harden the design against field faults. AEC-Q100 over-qualifies for non-automotive use but signals high reliability.
推荐
Seat and Mirror Control Module
Seat and mirror modules need multiple PWM channels, abundant GPIO, and a CAN interface - all delivered by the MC9S12D64CPVE. The 8-channel PWM drives seat motors, mirror position, and heater pads while the two ADCs read position-feedback potentiometers. CANbus links the module to the body controller for memory-set recall and diagnostics, and 64 KB Flash holds the position-memory, anti-pinch, and calibration routines. AEC-Q100 grade and the 112-LQFP's compact 20x20 mm footprint fit inside seat-mounted enclosures with high vibration profiles.
推荐
推荐产品汇总
工程参考数据： MC9S12D64CPVE ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MC9S12E64CPVE | MC9S12DG128CPVE | MC9S12DT256MPVE | MC9S12DJ64MFUE | MC9S12A128CPVE |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 112-LQFP (20x20) | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same |
| Core | HCS12 16-bit, 25 MHz | HCS12 16-bit, 25 MHz | HCS12 16-bit, 25 MHz | HCS12 16-bit, 25 MHz | HCS12 16-bit, 25 MHz | HCS12 16-bit, 25 MHz |
| Flash Memory | 64 KB | 64 KB | 128 KB | 256 KB | 64 KB | 128 KB |
| RAM | 4 KB | 4 KB | 8 KB | 12 KB | 4 KB | 8 KB |
| EEPROM | 1 KB | Expanded | 2 KB | 4 KB | 1 KB | 2 KB |
| CAN Controllers | 1 (MSCAN) | 1 | 2 | 2 | 2 | 1 |
| AEC-Q100 | Yes | Yes | Yes | Yes | Yes | Yes |
| Lifecycle Status | NRND | Active | Active | Active | Active | Active |
关键差异点
- AEC-Q100 automotive qualification with 5 V I/O tolerance （对比 MC9S12E64CPVE)
- Same-footprint upgrade path to higher Flash densities （对比 MC9S12DT256MPVE)
- HCS12 CISC toolchain compatibility （对比 STM32F1 (Cortex-M3))
设计说明
Decouple the MC9S12D64CPVE with 100 nF ceramic capacitors on every VDDX pin and a bulk 4.7 uF to 10 uF tantalum or ceramic on the main supply. Place the PLL loop-filter capacitor on XFC as specified in the NXP datasheet to maintain oscillator stability. Route VDDR through a ferrite bead from VDDX to keep regulator noise out of the digital supply. The internal voltage regulator requires adequate copper area under the die for heat spreading.
Use a 4-layer PCB with a dedicated ground plane under the 112-LQFP footprint. Keep the BKGD and RESET traces short and away from PWM switching traces to avoid spurious debug-mode entry. Route the CANRX/CANTX differential pair with 120 ohm characteristic impedance and place a common-mode choke near the transceiver connector for automotive EMI robustness. The crystal/EXTAL traces must be short and guarded by ground.
Do not leave the TEST pin floating; tie it to VSS through a 10 kohm pull-down so the device enters normal mode instead of factory test mode. Confirm the BDM pod compatibility (P&E Multilink or USB-ML-12) before bringing up firmware. Verify the ordering-code breakdown because CPVE, CPV, MPVE suffixes denote different temperature and quality grades per NXP ordering codes. Always check the device errata sheet before releasing firmware.
合规信息
AEC-Q100 qualified per NXP product page. RoHS and REACH compliant per NXP product page. Lifecycle status NRND - new designs should migrate to S12G/S12Z family.
