MCP3422A4-E/MS - 18-Bit Dual-Input Sigma-Delta ADC
料号: MCP3422A4-E/MS ✓ 量产中MCP3422A4-E/MS 概述
An ADC is an analog-to-digital converter, a semiconductor that transforms continuously varying voltage signals into numerical values for processing, measurement, or control. The MCP3422 belongs to the delta-sigma ADC family, where an internal modulator and digital filter shape the conversion result. It also fits the broader hierarchy of data-converter ICs, signal-chain ICs, and semiconductor components used in precision instrumentation.
The MCP3422A4-E/MS provides up to 18-bit resolution across two differential input channels. Its integrated 2.048 V reference supports a differential input range of plus or minus 2.048 V, while the I2C interface allows a host microcontroller to configure the converter and retrieve conversion results. A 3.75 SPS rate favors stable measurements over high-speed waveform capture, and the 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V systems.
The sigma-delta architecture emphasizes resolution, noise rejection, and effective performance for slowly changing or low-bandwidth signals. Differential input operation helps reject common-mode interference when a sensor is connected through balanced wiring. The internal reference reduces the number of external precision components, although reference accuracy, noise, and front-end design still determine the practical resolution of the complete measurement chain.
Typical uses include pressure and temperature transducers, bridge sensors, industrial process monitoring, laboratory measurement equipment, and low-rate sensor acquisition. The dual differential channels allow one converter to service two related analog inputs. Its 18-bit code depth is useful when the signal-to-noise ratio of the sensor and analog front end is sufficient to justify the extra resolution.
Design should begin with the input common-mode range, differential signal amplitude, and I2C bus requirements. Keep analog input traces short, use suitable filtering at the converter pins, and provide stable supply bypassing. Because this is a precision low-speed ADC, layout symmetry, connector cleanliness, reference grounding, and rejection of switching-node interference often matter more than raw processing speed.
This product summary combines manufacturer specifications, package and sourcing details, compatible family references, comparison parameters, and implementation guidance to support component selection and PCB design. The result also distinguishes device functions, electrical limits, and replacement considerations so engineers can assess fit before committing the 8-MSOP footprint to a design.
直接替换替代料: MCP3422A4-E/MS ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MCP3422A4-E/MS (相同外形与封装尺寸) ——差异在于 Differential Input Range, Package, Resolution.
MCP3422A1T-E/MS
✅ 直接替换📋 参考替代料(不在目录中)
MCP3422A5T-E/MS
✅ 直接替换📋 参考替代料(不在目录中)
MCP3422A0T-E/MS
✅ 直接替换📋 参考替代料(不在目录中)
MCP3422A2T-E/MS
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MCP3422A3T-E/MS
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MCP3422A4-E/MS 最大额定值与电气特性
| 分辨率 | 18 bit |
| Input Channels | 2 channels |
| Input Configuration | 2 differential inputs |
| Conversion Architecture | 1 sigma-delta ADC |
| Conversion Rate | 3.75 samples/s |
| Internal Reference Voltage | 2.048 V |
| Differential Input Range | -2.048 V to +2.048 V |
| 工作电源电压 | 2.7 V to 5.5 V |
| Digital Interface | I2C |
| 封装 | 8-pin MSOP |
| 工作温度 | -40 °C to +125 °C |
| RoHS 状态 | RoHS compliant |
| 安装类型 | Surface mount |
| Automotive Classification | Automotive listed |
MCP3422A4-E/MS 8-pin msop 引脚配置指南
MCP3422A4-E/MS(8-pin msop 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: MCP3422A4-E/MS.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MCP3422A4-E/MS 适用于 6 应用s: Industrial Pressure Transducer Acquisition, Temperature and Thermocouple Measurement, Precision Bridge Sensor Interface, Laboratory Instrumentation and Data Logging, Battery-Powered Environmental Monitoring, Process Control and Condition Monitoring.
Industrial Pressure Transducer Acquisition
The MCP3422A4-E/MS fits low-rate pressure sensing because it combines 18-bit resolution with two differential input channels and a 3.75 SPS conversion rate. A bridge or pressure transmitter can be connected to one differential channel while the second channel accepts a temperature or reference signal, allowing compensation within the same acquisition cycle. Its 2.048 V internal reference and ±2.048 V differential range simplify signal scaling, while the I2C interface connects efficiently to an embedded controller. Because industrial environments introduce motor and switching interference, the analog wiring should remain short and balanced, with filtering and supply bypassing placed close to the device.
推荐
Temperature and Thermocouple Measurement
The MCP3422A4-E/MS is appropriate for temperature acquisition when a 3.75 SPS update rate is sufficient and low noise matters more than rapid sampling. Two differential channels can monitor a thermocouple or RTD front end and a second temperature-dependent signal for compensation. The 18-bit conversion depth preserves small changes in low-level sensor outputs, while the 2.7 V to 5.5 V supply range supports common embedded instrumentation rails. Keep thermocouple junctions away from switching components, use shielded or differential wiring, and isolate high-impedance inputs from moisture and contamination to avoid errors that exceed the converter's nominal resolution.
推荐
Precision Bridge Sensor Interface
The MCP3422A4-E/MS can digitize the small differential output of a resistive bridge sensor without requiring a separate external reference. Its 18-bit resolution, two differential channels, and 2.048 V onboard reference are useful for weighing, force, and displacement systems where the useful signal is a fraction of the excitation voltage. The I2C interface reduces the number of host-controller pins, and the 3.75 SPS rate supports stable readings in a controlled environment. The bridge excitation should be low-noise, and the converter input network should be designed to suppress switching noise and electrostatic-discharge transients before they reach the high-resolution conversion stage.
推荐
Laboratory Instrumentation and Data Logging
The MCP3422A4-E/MS is well suited to laboratory instruments that record slow, high-resolution sensor values rather than transient waveforms. A microcontroller can configure the converter over I2C and read two differential channels at 3.75 samples per second, providing enough temporal resolution for temperature, voltage, and process measurements. The internal 2.048 V reference helps simplify calibration, while 18-bit output codes allow small signal changes to remain distinguishable when the analog front end is quiet. Use shielded sensor connections, clean grounding, and stable excitation supplies so that environmental and layout effects do not obscure the converter's nominal resolution.
推荐
Battery-Powered Environmental Monitoring
The MCP3422A4-E/MS can support compact environmental monitors that periodically measure slow sensor changes and then remain idle between samples. The 3.75 SPS rate avoids the continuous sampling demand of a high-speed converter, while two differential channels support paired sensing or a reference measurement. Its I2C interface allows a low-power microcontroller to control acquisition, and the 2.7 V minimum supply supports systems designed around a 3.3 V rail. Energy efficiency should be evaluated together with conversion timing and the behavior of the external analog front end. Sensor standby current, leakage, and conditioning-circuit power may dominate total consumption in a remote node.
推荐
Process Control and Condition Monitoring
The MCP3422A4-E/MS is useful in process-control equipment that must monitor two slowly changing analog quantities with high resolution. A 3.75 SPS rate can report valve position, tank level, pressure, or machine-condition signals without the data rate of a waveform converter. Differential inputs help reject shared ground offsets, and the I2C interface permits straightforward connection to an industrial controller. The 2.048 V internal reference supports a ±2.048 V differential range, but the complete input network must remain within the device's common-mode limits. Protective filtering is advisable when field wiring is exposed to motors, relays, or long cable runs.
推荐
推荐产品汇总
工程参考数据: MCP3422A4-E/MS ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MCP3422A1T-E/MS | MCP3422A5T-E/MS | MCP3422A0T-E/MS | MCP3422A2T-E/MS | MCP3422A3T-E/MS |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP |
| Resolution | 18 bit | 18 bit | 18 bit | 18 bit | 18 bit | 18 bit |
| Input Channels | 2 differential inputs | 2 differential inputs | 2 differential inputs | 2 differential inputs | 2 differential inputs | 2 differential inputs |
| Internal Reference | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V |
| Operating Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Digital Interface | I2C | I2C | I2C | I2C | I2C | I2C |
| Differential Input Range | -2.048 V to +2.048 V | -2.048 V to +2.048 V | -2.048 V to +2.048 V | -2.048 V to +2.048 V | -2.048 V to +2.048 V | -2.048 V to +2.048 V |
关键差异点
- Matches the target's core precision-converter configuration (对比 MCP3422A1T-E/MS)
- Supports a distinct acquisition-speed choice in the same footprint (对比 MCP3422A5T-E/MS)
- Offers slower acquisition in a pin-compatible family package (对比 MCP3422A0T-E/MS)
- Avoids the footprint change required by the MC suffix (对比 MCP3422A4-E/MC)
设计说明
Place the input and bypass capacitors directly beside their associated MCP3422A4-E/MS pins, and keep the two traces of each differential channel short, closely coupled, and away from switching nodes. The 18-bit resolution makes layout-induced pickup and ground potential differences capable of affecting usable accuracy. Follow the pin-description table and recommended application circuit in the Microchip manufacturer datasheet when assigning the 8-MSOP footprint and grounding the exposed circuitry around the converter.
Use a balanced connection for each differential input and treat common-mode voltage as a separate design constraint. Although the differential range is ±2.048 V, both input nodes must remain within the converter's permitted common-mode limits. For long sensor cables, add appropriately located protection and filtering, and verify that capacitor selection does not create excessive settling time for the selected conversion-rate option.
Decouple the analog and digital supply pins as shown in the manufacturer application circuit, and route supply current away from sensitive analog paths. The converter operates from 2.7 V to 5.5 V, but its usable resolution still depends on quiet supply voltage and reference behavior. If a switching regulator supplies the rail, position filtering appropriately and evaluate conducted noise at the ADC rather than assuming a nominal 3.3 V rail is sufficient.
Do not treat the A4, A1, A5, A0, A2, or A3 ordering option as interchangeable without checking conversion timing and configuration. The 3.75 SPS target rate is intended for slow measurements, not high-speed waveform capture. Also verify the package suffix: MCP3422A4-E/MC uses an 8-DFN package and therefore is not a drop-in replacement for the 8-MSOP MCP3422A4-E/MS.
合规信息
The LCSC product listing identifies MCP3422A4-E/MS as RoHS compliant. No additional RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified.