Microchip Technology

MCP3422A4-E/MS - 18-Bit Dual-Input Sigma-Delta ADC

MPN: MCP3422A4-E/MS ✓ فعال
2.048 V Vdss 8-pin MSOP Package
حداقل سفارش: 1 |

MCP3422A4-E/MS نمای کلی

The Microchip Technology MCP3422A4-E/MS is an 18-bit, two-channel sigma-delta analog-to-digital converter with a conversion rate of 3.75 samples per second, a 2.048 V internal reference, differential inputs, and an I2C interface in an 8-pin MSOP package. Its operating supply range is 2.7 V to 5.5 V.

An ADC is an analog-to-digital converter, a semiconductor that transforms continuously varying voltage signals into numerical values for processing, measurement, or control. The MCP3422 belongs to the delta-sigma ADC family, where an internal modulator and digital filter shape the conversion result. It also fits the broader hierarchy of data-converter ICs, signal-chain ICs, and semiconductor components used in precision instrumentation.

The MCP3422A4-E/MS provides up to 18-bit resolution across two differential input channels. Its integrated 2.048 V reference supports a differential input range of plus or minus 2.048 V, while the I2C interface allows a host microcontroller to configure the converter and retrieve conversion results. A 3.75 SPS rate favors stable measurements over high-speed waveform capture, and the 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V systems.

The sigma-delta architecture emphasizes resolution, noise rejection, and effective performance for slowly changing or low-bandwidth signals. Differential input operation helps reject common-mode interference when a sensor is connected through balanced wiring. The internal reference reduces the number of external precision components, although reference accuracy, noise, and front-end design still determine the practical resolution of the complete measurement chain.

Typical uses include pressure and temperature transducers, bridge sensors, industrial process monitoring, laboratory measurement equipment, and low-rate sensor acquisition. The dual differential channels allow one converter to service two related analog inputs. Its 18-bit code depth is useful when the signal-to-noise ratio of the sensor and analog front end is sufficient to justify the extra resolution.

Design should begin with the input common-mode range, differential signal amplitude, and I2C bus requirements. Keep analog input traces short, use suitable filtering at the converter pins, and provide stable supply bypassing. Because this is a precision low-speed ADC, layout symmetry, connector cleanliness, reference grounding, and rejection of switching-node interference often matter more than raw processing speed.

This product summary combines manufacturer specifications, package and sourcing details, compatible family references, comparison parameters, and implementation guidance to support component selection and PCB design. The result also distinguishes device functions, electrical limits, and replacement considerations so engineers can assess fit before committing the 8-MSOP footprint to a design.

جایگزین‌های drop-in برای MCP3422A4-E/MS — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای MCP3422A4-E/MS (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Differential Input Range, Package, Resolution.

Microchip Technology
Differential Input Range: ±2.048 V
Package: 8-pin MSOP, 3 mm x 3 mm x 0.85 mm
Resolution: Up to 18 bits

MCP3422A1T-E/MS

✅ جایگزین مستقیم
📦 8-MSOP
Same 18-bit resolution, two differential channels, I2C interface, 2.048 V reference, and 8-MSOP footprint; conversion-rate option differs from the target's 3.75 SPS setting.

📋 جایگزین مرجع (خارج از کاتالوگ)

MCP3422A5T-E/MS

✅ جایگزین مستقیم
📦 8-MSOP
Same 18-bit resolution, two differential channels, I2C interface, 2.048 V reference, and 8-MSOP footprint; the A5 conversion-rate option is faster than 3.75 SPS.

📋 جایگزین مرجع (خارج از کاتالوگ)

MCP3422A0T-E/MS

✅ جایگزین مستقیم
📦 8-MSOP
Same 18-bit resolution, two differential channels, I2C interface, 2.048 V reference, and 8-MSOP footprint; the A0 conversion-rate option is slower than 3.75 SPS.

📋 جایگزین مرجع (خارج از کاتالوگ)

MCP3422A2T-E/MS

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-MSOP
Same 18-bit resolution, two differential channels, I2C interface, 2.048 V reference, and 8-MSOP footprint; only the family conversion-rate ordering option changes.

📋 جایگزین مرجع (خارج از کاتالوگ)

MCP3422A3T-E/MS

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-MSOP
Same 18-bit resolution, two differential channels, I2C interface, 2.048 V reference, and 8-MSOP footprint; only the family conversion-rate ordering option changes.

📋 جایگزین مرجع (خارج از کاتالوگ)

MCP3422A4-E/MS حداکثر مقادیر مجاز و مشخصات الکتریکی

رزولوشن 18 bit
Input Channels 2 channels
Input Configuration 2 differential inputs
Conversion Architecture 1 sigma-delta ADC
Conversion Rate 3.75 samples/s
Internal Reference Voltage 2.048 V
Differential Input Range -2.048 V to +2.048 V
ولتاژ تغذیه کاری 2.7 V to 5.5 V
Digital Interface I2C
بسته‌بندی 8-pin MSOP
دمای کاری -40 °C to +125 °C
وضعیت RoHS RoHS compliant
نوع نصب Surface mount
Automotive Classification Automotive listed

راهنمای پیکربندی پین MCP3422A4-E/MS 8-pin msop

پیکربندی پین برای MCP3422A4-E/MS (پکیج 8-pin msop). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 8-pin msop برای MCP3422A4-E/MS

داده پین‌آوت تفصیلی موجود نیست برای MCP3422A4-E/MS.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MCP3422A4-E/MS مناسب است برای 6 کاربردs: Industrial Pressure Transducer Acquisition, Temperature and Thermocouple Measurement, Precision Bridge Sensor Interface, Laboratory Instrumentation and Data Logging, Battery-Powered Environmental Monitoring, Process Control and Condition Monitoring.

🏭

Industrial Pressure Transducer Acquisition

The MCP3422A4-E/MS fits low-rate pressure sensing because it combines 18-bit resolution with two differential input channels and a 3.75 SPS conversion rate. A bridge or pressure transmitter can be connected to one differential channel while the second channel accepts a temperature or reference signal, allowing compensation within the same acquisition cycle. Its 2.048 V internal reference and ±2.048 V differential range simplify signal scaling, while the I2C interface connects efficiently to an embedded controller. Because industrial environments introduce motor and switching interference, the analog wiring should remain short and balanced, with filtering and supply bypassing placed close to the device.

🌡️

Temperature and Thermocouple Measurement

The MCP3422A4-E/MS is appropriate for temperature acquisition when a 3.75 SPS update rate is sufficient and low noise matters more than rapid sampling. Two differential channels can monitor a thermocouple or RTD front end and a second temperature-dependent signal for compensation. The 18-bit conversion depth preserves small changes in low-level sensor outputs, while the 2.7 V to 5.5 V supply range supports common embedded instrumentation rails. Keep thermocouple junctions away from switching components, use shielded or differential wiring, and isolate high-impedance inputs from moisture and contamination to avoid errors that exceed the converter's nominal resolution.

⚖️

Precision Bridge Sensor Interface

The MCP3422A4-E/MS can digitize the small differential output of a resistive bridge sensor without requiring a separate external reference. Its 18-bit resolution, two differential channels, and 2.048 V onboard reference are useful for weighing, force, and displacement systems where the useful signal is a fraction of the excitation voltage. The I2C interface reduces the number of host-controller pins, and the 3.75 SPS rate supports stable readings in a controlled environment. The bridge excitation should be low-noise, and the converter input network should be designed to suppress switching noise and electrostatic-discharge transients before they reach the high-resolution conversion stage.

🔬

Laboratory Instrumentation and Data Logging

The MCP3422A4-E/MS is well suited to laboratory instruments that record slow, high-resolution sensor values rather than transient waveforms. A microcontroller can configure the converter over I2C and read two differential channels at 3.75 samples per second, providing enough temporal resolution for temperature, voltage, and process measurements. The internal 2.048 V reference helps simplify calibration, while 18-bit output codes allow small signal changes to remain distinguishable when the analog front end is quiet. Use shielded sensor connections, clean grounding, and stable excitation supplies so that environmental and layout effects do not obscure the converter's nominal resolution.

🧩

Battery-Powered Environmental Monitoring

The MCP3422A4-E/MS can support compact environmental monitors that periodically measure slow sensor changes and then remain idle between samples. The 3.75 SPS rate avoids the continuous sampling demand of a high-speed converter, while two differential channels support paired sensing or a reference measurement. Its I2C interface allows a low-power microcontroller to control acquisition, and the 2.7 V minimum supply supports systems designed around a 3.3 V rail. Energy efficiency should be evaluated together with conversion timing and the behavior of the external analog front end. Sensor standby current, leakage, and conditioning-circuit power may dominate total consumption in a remote node.

📡

Process Control and Condition Monitoring

The MCP3422A4-E/MS is useful in process-control equipment that must monitor two slowly changing analog quantities with high resolution. A 3.75 SPS rate can report valve position, tank level, pressure, or machine-condition signals without the data rate of a waveform converter. Differential inputs help reject shared ground offsets, and the I2C interface permits straightforward connection to an industrial controller. The 2.048 V internal reference supports a ±2.048 V differential range, but the complete input network must remain within the device's common-mode limits. Protective filtering is advisable when field wiring is exposed to motors, relays, or long cable runs.

خلاصه محصولات پیشنهادی

MCP3423 Related multi-channel delta-sigma ADC family member استفاده‌شده در: Industrial Pressure Transducer Acquisition, Precision Bridge Sensor Interface, Battery-Powered Environmental Monitoring MCP3424 Related delta-sigma ADC family member استفاده‌شده در: Industrial Pressure Transducer Acquisition, Temperature and Thermocouple Measurement, Laboratory Instrumentation and Data Logging, Process Control and Condition Monitoring MCP3422A1T-E/MS Same-family measurement ADC with different conversion-rate option استفاده‌شده در: Temperature and Thermocouple Measurement MCP3422A5T-E/MS Same-family bridge measurement ADC with faster conversion option استفاده‌شده در: Precision Bridge Sensor Interface MCP3422A0T-E/MS Same-family low-rate precision ADC option استفاده‌شده در: Laboratory Instrumentation and Data Logging MCP3422A2T-E/MS Same-family low-rate environmental sensing ADC استفاده‌شده در: Battery-Powered Environmental Monitoring MCP3422A3T-E/MS Same-family process-monitoring ADC option استفاده‌شده در: Process Control and Condition Monitoring
What are the key specifications of MCP3422A4-E/MS that engineers should know?
The MCP3422A4-E/MS is an 18-bit, two-channel sigma-delta ADC with a 3.75 SPS conversion rate, differential inputs, a 2.048 V internal reference, and an I2C interface. According to the Microchip manufacturer datasheet, it operates from 2.7 V to 5.5 V and supports a differential input range of ±2.048 V. The device is packaged in an 8-pin MSOP and is specified for -40 °C to +125 °C operation, making it suitable for precision, low-bandwidth measurement systems.
What is the operating voltage of MCP3422A4-E/MS?
The MCP3422A4-E/MS operates from 2.7 V to 5.5 V. According to the Microchip manufacturer datasheet, this range supports 3.3 V and 5 V systems while providing separate digital and analog supply options where the device configuration permits them. The input signal must also remain within the converter's specified common-mode and differential ranges; the internal 2.048 V reference establishes a differential measurement range of ±2.048 V.
How many bits and input channels does MCP3422A4-E/MS have?
The MCP3422A4-E/MS provides up to 18 bits of resolution and two differential input channels. The Microchip manufacturer datasheet identifies the device as a member of the MCP342X low-noise, high-accuracy delta-sigma ADC family. Two channels let a system measure two balanced sensor outputs without requiring a second converter, while the differential arrangement supports rejection of common-mode voltage present equally on both input wires.
Where to download the MCP3422A4-E/MS datasheet PDF?
The MCP3422A4-E/MS manufacturer datasheet can be downloaded from the PDF linked on this product page. The document describes the MCP3422, MCP3423, and MCP3424 family members, including their 18-bit conversion capability, onboard 2.048 V reference, and differential input architecture. Use the pin-description table and electrical-characteristics sections when assigning PCB pins, selecting bypass capacitors, and validating the analog input network.
Where can I find the MCP3422A4-E/MS pinout?
The MCP3422A4-E/MS uses an 8-pin MSOP package, and its authoritative pin assignments are shown in the Microchip manufacturer datasheet. Use the pin-description table and package drawing rather than inferring connections from another MCP3422 package option. In particular, verify analog inputs, ground, supply, reference, and I2C connections against the exact ordering information because mechanically similar packages do not necessarily share identical pinouts.
What can replace the MCP3422A4-E/MS?
The MCP3422A4-E/MS can be replaced only after confirming package, pinout, supply range, reference configuration, channel count, interface, and conversion-rate requirements. Same-package MCP3422A-series devices are the closest family options, but their A-number conversion-rate option can change acquisition time. A different-package MCP3422A4-E/MC is not a footprint-compatible replacement, so PCB changes would be required. Verify every operating limit before approving a substitution.
Is MCP3422A4-E/MS suitable for precision sensor measurement?
The MCP3422A4-E/MS is suitable for precision, low-bandwidth sensor measurement when the sensor and analog front end provide adequate signal-to-noise performance. Its 18-bit resolution, two differential channels, and ±2.048 V differential input range suit bridge, pressure, temperature, and industrial process signals. The 3.75 SPS conversion rate prioritizes stable readings rather than rapid sampling, so applications requiring waveform acquisition should evaluate a faster converter.
MCP3422A4-E/MS vs MCP3422A5T-E/MS — which is better for slow sensor signals?
MCP3422A4-E/MS and MCP3422A5T-E/MS are both members of the same 8-MSOP MCP3422 family, but their conversion-rate options differ. The MCP3422A4-E/MS is listed at 3.75 SPS, while the A5T option provides a faster conversion setting. Choose according to required acquisition time, noise bandwidth, and available integration time rather than treating the change as a purely cosmetic ordering-code difference.
When should I choose MCP3422A4-E/MS over MCP3422A0T-E/MS?
Choose MCP3422A4-E/MS when a 3.75 SPS conversion rate better matches the required sensor update interval than the slower MCP3422A0T-E/MS option. Both devices belong to the same 8-MSOP family and provide two differential channels with an 18-bit resolution target, but their conversion-rate choices affect acquisition time and usable bandwidth. Confirm the complete electrical configuration and timing behavior in the manufacturer datasheet before replacing one ordering option with the other.
What is the best Microchip equivalent for MCP3422A4-E/MS?
The closest Microchip equivalents are the MCP3422A-series devices that use the same 8-pin MSOP package and provide two differential channels, an I2C interface, and up to 18-bit resolution. MCP3422A0T-E/MS, MCP3422A1T-E/MS, MCP3422A2T-E/MS, MCP3422A3T-E/MS, and MCP3422A5T-E/MS are the relevant family choices. Their conversion-rate options differ, so the correct replacement depends on measurement timing as well as footprint compatibility.
Is MCP3422A4-E/MS the same as MCP3422A4-E/MC?
No. The MCP3422A4-E/MS and MCP3422A4-E/MC versions use different packages: the MS version is an 8-MSOP, while the MC version is an 8-DFN measuring 2 mm by 3 mm. Although both belong to the MCP3422A4 ordering family, the different land patterns mean the MC part is not a pin-compatible drop-in replacement for an existing MSOP board.
Where to buy MCP3422A4-E/MS online?
Use the Request a Quote form on this page to request MCP3422A4-E/MS availability, current commercial terms, and suitable order quantities. The manufacturer's product listing shows inventory of 9,800 units in full tubes and states an estimated factory lead time of six weeks, with estimated shipping by 8 December 2026. Request a firm schedule for your required quantity and packaging rather than relying on a stale listing snapshot.
What is the price of MCP3422A4-E/MS?
The current commercial price for MCP3422A4-E/MS should be requested through the Request a Quote form on this page. The form can confirm the quantity tier, currency, packaging, stock allocation, and delivery terms for the exact 8-MSOP ordering code. This approach avoids presenting a changing distributor figure as a fixed quotation and ensures that the requested configuration matches the MCP3422A4-E/MS rather than a related package or conversion-rate option.
What is the lead time for MCP3422A4-E/MS?
The Microchip product listing states an estimated factory lead time of six weeks for MCP3422A4-E/MS, with estimated shipping by 8 December 2026. It also lists 9,800 units in full tubes at the time of the product-page update. Because schedules can change with volume and inventory allocation, use the Request a Quote form on this page to confirm the current lead time and delivery plan for the quantity you need.
Is MCP3422A4-E/MS in stock?
The Microchip product listing shows 9,800 MCP3422A4-E/MS units in full tubes and describes the part as available for estimated shipment on 30 October 2026. Inventory status can change quickly and may not represent every package quantity, so use the Request a Quote form on this page to reserve or confirm the current quantity. The form is the appropriate route for checking live stock for your required order size.
What design considerations apply to the MCP3422A4-E/MS analog input?
The MCP3422A4-E/MS should be used with input voltages that satisfy both its differential range and common-mode limits. According to the Microchip manufacturer datasheet, the internal 2.048 V reference supports ±2.048 V differential measurement. Keep sensor wiring short, balance the two connections of each differential channel, remove coupled switching noise before the converter, and follow the manufacturer input-capacitor and grounding recommendations. These practices are especially important at 18-bit resolution, where unwanted noise can reduce usable code accuracy.

داده‌های مرجع مهندسی برای MCP3422A4-E/MS — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose MCP3422A4-E/MS for an 18-bit, two-channel differential measurement design that uses an 8-MSOP footprint and requires a 3.75 SPS conversion rate. Its internal 2.048 V reference, ±2.048 V differential range, and I2C interface simplify a precision sensor-acquisition circuit operating from 2.7 V to 5.5 V. Select MCP3422A5T-E/MS when the same package and channel architecture are needed with a faster conversion-rate option, or MCP3422A0T-E/MS when slower acquisition and longer integration time are preferred. MCP3422A1T-E/MS, MCP3422A2T-E/MS, and MCP3422A3T-E/MS are other same-family timing choices that require configuration review. Do not select MCP3422A4-E/MC as a board-level replacement because its 8-DFN package is mechanically different. For any substitution, verify pin assignments, common-mode range, acquisition timing, reference configuration, and calibration behavior.

مقایسه با جایگزین‌ها

پارامتر این محصول MCP3422A1T-E/MS MCP3422A5T-E/MS MCP3422A0T-E/MS MCP3422A2T-E/MS MCP3422A3T-E/MS
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-MSOP 8-MSOP 8-MSOP 8-MSOP 8-MSOP 8-MSOP
Resolution 18 bit 18 bit 18 bit 18 bit 18 bit 18 bit
Input Channels 2 differential inputs 2 differential inputs 2 differential inputs 2 differential inputs 2 differential inputs 2 differential inputs
Internal Reference 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V
Operating Supply Voltage 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
Digital Interface I2C I2C I2C I2C I2C I2C
Differential Input Range -2.048 V to +2.048 V -2.048 V to +2.048 V -2.048 V to +2.048 V -2.048 V to +2.048 V -2.048 V to +2.048 V -2.048 V to +2.048 V

تفاوت‌های کلیدی

  • Matches the target's core precision-converter configuration (در مقابلMCP3422A1T-E/MS)
  • Supports a distinct acquisition-speed choice in the same footprint (در مقابلMCP3422A5T-E/MS)
  • Offers slower acquisition in a pin-compatible family package (در مقابلMCP3422A0T-E/MS)
  • Avoids the footprint change required by the MC suffix (در مقابلMCP3422A4-E/MC)

یادداشت‌های طراحی

Place the input and bypass capacitors directly beside their associated MCP3422A4-E/MS pins, and keep the two traces of each differential channel short, closely coupled, and away from switching nodes. The 18-bit resolution makes layout-induced pickup and ground potential differences capable of affecting usable accuracy. Follow the pin-description table and recommended application circuit in the Microchip manufacturer datasheet when assigning the 8-MSOP footprint and grounding the exposed circuitry around the converter.

Use a balanced connection for each differential input and treat common-mode voltage as a separate design constraint. Although the differential range is ±2.048 V, both input nodes must remain within the converter's permitted common-mode limits. For long sensor cables, add appropriately located protection and filtering, and verify that capacitor selection does not create excessive settling time for the selected conversion-rate option.

Decouple the analog and digital supply pins as shown in the manufacturer application circuit, and route supply current away from sensitive analog paths. The converter operates from 2.7 V to 5.5 V, but its usable resolution still depends on quiet supply voltage and reference behavior. If a switching regulator supplies the rail, position filtering appropriately and evaluate conducted noise at the ADC rather than assuming a nominal 3.3 V rail is sufficient.

Do not treat the A4, A1, A5, A0, A2, or A3 ordering option as interchangeable without checking conversion timing and configuration. The 3.75 SPS target rate is intended for slow measurements, not high-speed waveform capture. Also verify the package suffix: MCP3422A4-E/MC uses an 8-DFN package and therefore is not a drop-in replacement for the 8-MSOP MCP3422A4-E/MS.

اطلاعات انطباق

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The LCSC product listing identifies MCP3422A4-E/MS as RoHS compliant. No additional RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified.

تاریخ تأیید داده‌ها: 2026-11-15 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MCP3422A4-E/MS datasheet MCP3422A4-E/MS pinout MCP3422A4-E/MS datasheet pdf MCP3422A4-E/MS specifications MCP3422A4-E/MS equivalent MCP3422A4-E/MS replacement MCP3422A4-E/MS cross reference MCP3422A4-E/MS price MCP3422A4-E/MS stock MCP3422A4-E/MS footprint MCP3422A4-E/MS application circuit MCP3422A4-E/MS vs MCP3422A5T-E/MS Microchip MCP3422A4-E/MS MCP3422 8-MSOP 18-bit ADC

قطعات و اصطلاحات مرتبط

Microchip Technology MCP3422A4-E/MS MCP3422A1T-E/MS MCP3422A5T-E/MS MCP3422A0T-E/MS MCP3422A2T-E/MS MCP3422A3T-E/MS MCP3422A4-E/MC MCP3423 MCP3424 ADC analog-to-digital converter sigma-delta ADC delta-sigma converter data-converter IC signal-chain IC semiconductor I2C 2.048 V internal reference differential input 18-bit resolution 3.75 samples per second 8-MSOP MSOP package family surface-mount package
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ