MCP3422A4-E/MS - 18-Bit Dual-Input Sigma-Delta ADC
N.º da peça: MCP3422A4-E/MS ✓ AtivoMCP3422A4-E/MS Visão geral
An ADC is an analog-to-digital converter, a semiconductor that transforms continuously varying voltage signals into numerical values for processing, measurement, or control. The MCP3422 belongs to the delta-sigma ADC family, where an internal modulator and digital filter shape the conversion result. It also fits the broader hierarchy of data-converter ICs, signal-chain ICs, and semiconductor components used in precision instrumentation.
The MCP3422A4-E/MS provides up to 18-bit resolution across two differential input channels. Its integrated 2.048 V reference supports a differential input range of plus or minus 2.048 V, while the I2C interface allows a host microcontroller to configure the converter and retrieve conversion results. A 3.75 SPS rate favors stable measurements over high-speed waveform capture, and the 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V systems.
The sigma-delta architecture emphasizes resolution, noise rejection, and effective performance for slowly changing or low-bandwidth signals. Differential input operation helps reject common-mode interference when a sensor is connected through balanced wiring. The internal reference reduces the number of external precision components, although reference accuracy, noise, and front-end design still determine the practical resolution of the complete measurement chain.
Typical uses include pressure and temperature transducers, bridge sensors, industrial process monitoring, laboratory measurement equipment, and low-rate sensor acquisition. The dual differential channels allow one converter to service two related analog inputs. Its 18-bit code depth is useful when the signal-to-noise ratio of the sensor and analog front end is sufficient to justify the extra resolution.
Design should begin with the input common-mode range, differential signal amplitude, and I2C bus requirements. Keep analog input traces short, use suitable filtering at the converter pins, and provide stable supply bypassing. Because this is a precision low-speed ADC, layout symmetry, connector cleanliness, reference grounding, and rejection of switching-node interference often matter more than raw processing speed.
This product summary combines manufacturer specifications, package and sourcing details, compatible family references, comparison parameters, and implementation guidance to support component selection and PCB design. The result also distinguishes device functions, electrical limits, and replacement considerations so engineers can assess fit before committing the 8-MSOP footprint to a design.
Alternativas drop-in para MCP3422A4-E/MS — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MCP3422A4-E/MS (mesmo formato e footprint) — diferindo em Differential Input Range, Package, Resolution.
MCP3422A1T-E/MS
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MCP3422A5T-E/MS
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MCP3422A0T-E/MS
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MCP3422A2T-E/MS
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MCP3422A3T-E/MS
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MCP3422A4-E/MS Classificações máximas e características elétricas
| Resolução | 18 bit |
| Input Channels | 2 channels |
| Input Configuration | 2 differential inputs |
| Conversion Architecture | 1 sigma-delta ADC |
| Conversion Rate | 3.75 samples/s |
| Internal Reference Voltage | 2.048 V |
| Differential Input Range | -2.048 V to +2.048 V |
| Tensão de alimentação de operação | 2.7 V to 5.5 V |
| Digital Interface | I2C |
| Encapsulamento | 8-pin MSOP |
| Temperatura de operação | -40 °C to +125 °C |
| Status RoHS | RoHS compliant |
| Tipo de montagem | Surface mount |
| Automotive Classification | Automotive listed |
Guia de Configuração de Pinos do MCP3422A4-E/MS 8-pin msop
Configuração de pinos para MCP3422A4-E/MS (pacote 8-pin msop). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para MCP3422A4-E/MS.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MCP3422A4-E/MS é adequado para 6 aplicaçãos: Industrial Pressure Transducer Acquisition, Temperature and Thermocouple Measurement, Precision Bridge Sensor Interface, Laboratory Instrumentation and Data Logging, Battery-Powered Environmental Monitoring, Process Control and Condition Monitoring.
Industrial Pressure Transducer Acquisition
The MCP3422A4-E/MS fits low-rate pressure sensing because it combines 18-bit resolution with two differential input channels and a 3.75 SPS conversion rate. A bridge or pressure transmitter can be connected to one differential channel while the second channel accepts a temperature or reference signal, allowing compensation within the same acquisition cycle. Its 2.048 V internal reference and ±2.048 V differential range simplify signal scaling, while the I2C interface connects efficiently to an embedded controller. Because industrial environments introduce motor and switching interference, the analog wiring should remain short and balanced, with filtering and supply bypassing placed close to the device.
Recomendado
Temperature and Thermocouple Measurement
The MCP3422A4-E/MS is appropriate for temperature acquisition when a 3.75 SPS update rate is sufficient and low noise matters more than rapid sampling. Two differential channels can monitor a thermocouple or RTD front end and a second temperature-dependent signal for compensation. The 18-bit conversion depth preserves small changes in low-level sensor outputs, while the 2.7 V to 5.5 V supply range supports common embedded instrumentation rails. Keep thermocouple junctions away from switching components, use shielded or differential wiring, and isolate high-impedance inputs from moisture and contamination to avoid errors that exceed the converter's nominal resolution.
Recomendado
Precision Bridge Sensor Interface
The MCP3422A4-E/MS can digitize the small differential output of a resistive bridge sensor without requiring a separate external reference. Its 18-bit resolution, two differential channels, and 2.048 V onboard reference are useful for weighing, force, and displacement systems where the useful signal is a fraction of the excitation voltage. The I2C interface reduces the number of host-controller pins, and the 3.75 SPS rate supports stable readings in a controlled environment. The bridge excitation should be low-noise, and the converter input network should be designed to suppress switching noise and electrostatic-discharge transients before they reach the high-resolution conversion stage.
Recomendado
Laboratory Instrumentation and Data Logging
The MCP3422A4-E/MS is well suited to laboratory instruments that record slow, high-resolution sensor values rather than transient waveforms. A microcontroller can configure the converter over I2C and read two differential channels at 3.75 samples per second, providing enough temporal resolution for temperature, voltage, and process measurements. The internal 2.048 V reference helps simplify calibration, while 18-bit output codes allow small signal changes to remain distinguishable when the analog front end is quiet. Use shielded sensor connections, clean grounding, and stable excitation supplies so that environmental and layout effects do not obscure the converter's nominal resolution.
Recomendado
Battery-Powered Environmental Monitoring
The MCP3422A4-E/MS can support compact environmental monitors that periodically measure slow sensor changes and then remain idle between samples. The 3.75 SPS rate avoids the continuous sampling demand of a high-speed converter, while two differential channels support paired sensing or a reference measurement. Its I2C interface allows a low-power microcontroller to control acquisition, and the 2.7 V minimum supply supports systems designed around a 3.3 V rail. Energy efficiency should be evaluated together with conversion timing and the behavior of the external analog front end. Sensor standby current, leakage, and conditioning-circuit power may dominate total consumption in a remote node.
Recomendado
Process Control and Condition Monitoring
The MCP3422A4-E/MS is useful in process-control equipment that must monitor two slowly changing analog quantities with high resolution. A 3.75 SPS rate can report valve position, tank level, pressure, or machine-condition signals without the data rate of a waveform converter. Differential inputs help reject shared ground offsets, and the I2C interface permits straightforward connection to an industrial controller. The 2.048 V internal reference supports a ±2.048 V differential range, but the complete input network must remain within the device's common-mode limits. Protective filtering is advisable when field wiring is exposed to motors, relays, or long cable runs.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MCP3422A4-E/MS — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MCP3422A1T-E/MS | MCP3422A5T-E/MS | MCP3422A0T-E/MS | MCP3422A2T-E/MS | MCP3422A3T-E/MS |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP |
| Resolution | 18 bit | 18 bit | 18 bit | 18 bit | 18 bit | 18 bit |
| Input Channels | 2 differential inputs | 2 differential inputs | 2 differential inputs | 2 differential inputs | 2 differential inputs | 2 differential inputs |
| Internal Reference | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V |
| Operating Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Digital Interface | I2C | I2C | I2C | I2C | I2C | I2C |
| Differential Input Range | -2.048 V to +2.048 V | -2.048 V to +2.048 V | -2.048 V to +2.048 V | -2.048 V to +2.048 V | -2.048 V to +2.048 V | -2.048 V to +2.048 V |
Principais diferenciais
- Matches the target's core precision-converter configuration (vs MCP3422A1T-E/MS)
- Supports a distinct acquisition-speed choice in the same footprint (vs MCP3422A5T-E/MS)
- Offers slower acquisition in a pin-compatible family package (vs MCP3422A0T-E/MS)
- Avoids the footprint change required by the MC suffix (vs MCP3422A4-E/MC)
Notas de projeto
Place the input and bypass capacitors directly beside their associated MCP3422A4-E/MS pins, and keep the two traces of each differential channel short, closely coupled, and away from switching nodes. The 18-bit resolution makes layout-induced pickup and ground potential differences capable of affecting usable accuracy. Follow the pin-description table and recommended application circuit in the Microchip manufacturer datasheet when assigning the 8-MSOP footprint and grounding the exposed circuitry around the converter.
Use a balanced connection for each differential input and treat common-mode voltage as a separate design constraint. Although the differential range is ±2.048 V, both input nodes must remain within the converter's permitted common-mode limits. For long sensor cables, add appropriately located protection and filtering, and verify that capacitor selection does not create excessive settling time for the selected conversion-rate option.
Decouple the analog and digital supply pins as shown in the manufacturer application circuit, and route supply current away from sensitive analog paths. The converter operates from 2.7 V to 5.5 V, but its usable resolution still depends on quiet supply voltage and reference behavior. If a switching regulator supplies the rail, position filtering appropriately and evaluate conducted noise at the ADC rather than assuming a nominal 3.3 V rail is sufficient.
Do not treat the A4, A1, A5, A0, A2, or A3 ordering option as interchangeable without checking conversion timing and configuration. The 3.75 SPS target rate is intended for slow measurements, not high-speed waveform capture. Also verify the package suffix: MCP3422A4-E/MC uses an 8-DFN package and therefore is not a drop-in replacement for the 8-MSOP MCP3422A4-E/MS.
Informações de conformidade
The LCSC product listing identifies MCP3422A4-E/MS as RoHS compliant. No additional RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified.