MPC8306SCVMABDCA - PowerQUICC II Pro SoC 133MHz | NXP
料号： MPC8306SCVMABDCA ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $38.5 | $38.50 |
| 10 | $35.2 | $352.00 |
| 100 | $31.75 | $3,175.00 |
| 500 | $28.9 | $14,450.00 |
| 1,000 | $26.4 | $26,400.00 |
MPC8306SCVMABDCA 概述
A communications SoC (System-on-Chip) is an integrated circuit that consolidates a processor core, memory controllers, and dedicated communications peripherals onto a single die. The MPC8306SCVMABDCA sits in the hierarchy SoC -> communications processor -> PowerQUICC II Pro -> MPC830x family, where it serves as the ultra low-end node targeting price-sensitive wireline and industrial designs. Its integrated QUICC Engine offloads bit-level protocol processing from the CPU, enabling deterministic throughput for HDLC and TDM traffic.
Key features include a 32-bit PowerPC e300c3 core, 133 MHz operation, DDR2 memory controller, 16-bit local bus, dual 10/100 Ethernet MACs, USB 2.0 (full-speed), HDLC/TDM support via QUICC Engine, IEEE 1588 v2 hardware time-stamping, and an extended -40C to +105C industrial operating temperature range. The 369-PBGA MAP-BGA package exposes the full peripheral set while keeping the PCB footprint compact. Security, boot, and reset features include secure boot, multiple reset sources, and JTAG boundary scan.
The architecture pairs the e300c3 superscalar core with the QUICC Engine block, which contains RISC communication controllers optimized for serial protocol termination. On-chip DDR2 controller supports common industrial memory configurations, while the local bus controller glues to NOR flash, NAND flash, and FPGA/ASIC peripherals. Industrial-grade temperature compliance and a long-life roadmap (when active) make the part suitable for legacy factory automation, telecom edge nodes, and serial concentrator designs.
Typical applications include industrial Ethernet gateways, HDLC/TDM line-card controllers, sub-rack telecom equipment, serial-protocol concentrators, secure embedded routers, and legacy industrial control boards. The combination of QUICC Engine, dual Ethernet, and USB also fits retail/POS terminals that need deterministic serial-channel processing alongside IP connectivity.
When designing with this device, ensure DDR2 trace lengths follow the NXP reference design layout guide and that the QUICC Engine firmware (RISC microcode) is loaded into the designated memory region during boot. Thermal management is straightforward due to the modest 133 MHz clock and industrial-grade silicon.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
直接替换替代料： MPC8306SCVMABDCA ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： MPC8306SCVMABDCA （相同外形与封装尺寸） ——差异在于 Ethernet, Memory Controller, Operating Temperature, Package, Data Bus Width.
快速对比工具——选择替代料号进行并排对比：
MPC8306CVMABDCA
✅ 直接替换📋 参考替代料（不在目录中）
MPC8306VMABDCA
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$16.1 / 个
查看数据手册 →MPC8306SCVMADDCA
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
MPC8306SVMABDCA
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$17 / 个
查看数据手册 →MPC8306CVMAJDCA
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
MPC8306SCVMABDCA 最大额定值与电气特性
| Core | PowerPC e300c3 |
| Architecture | Power Architecture, 32-bit |
| Maximum Core Frequency | 133 MHz |
| Number of Cores | 1 |
| 数据总线宽度 | 32 bit |
| 封装 | 369-PBGA MAP-BGA (19x19 mm) |
| 安装类型 | Surface Mount |
| 工作温度 | -40C to +105C (extended) |
| Memory Controller | DDR2 |
| Local Bus | 16-bit |
| Ethernet | Dual 10/100 MAC (R/MII) |
| USB | USB 2.0 Full-Speed |
| Communications Engine | QUICC Engine (HDLC, TDM) |
| Time Synchronization | IEEE 1588 v2 |
| RoHS 状态 | Compliant |
MPC8306SCVMABDCA 369-pbga map-bga (19x19 mm) 引脚配置指南
MPC8306SCVMABDCA（369-pbga map-bga (19x19 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： MPC8306SCVMABDCA.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MPC8306SCVMABDCA 适用于 6 应用s: Industrial Ethernet Gateways, Telecom Line-Card Controllers, Serial Protocol Concentrators, Secure Embedded Routers, POS and Retail Terminals, Legacy Industrial Control Boards.
Industrial Ethernet Gateways
The MPC8306SCVMABDCA is well-suited for industrial Ethernet gateway designs that bridge legacy serial fieldbuses to modern IP networks. Its dual 10/100 Ethernet MACs (R/MII) provide redundant uplink and field-network connections, while the integrated QUICC Engine handles HDLC and TDM protocols commonly found in industrial automation. The 133 MHz e300c3 core delivers sufficient processing power for protocol translation, firewall filtering, and basic web management. The extended -40C to +105C temperature range ensures reliable operation in factory-floor cabinets and outdoor enclosures. The 369-PBGA MAP-BGA package allows compact gateway hardware designs, and DDR2 memory support enables buffering of industrial traffic bursts. Compared to switching regulators, the deterministic QUICC Engine offloads bit-level processing from the CPU.
推荐
Telecom Line-Card Controllers
For telecom line-card and sub-rack equipment, the MPC8306SCVMABDCA provides an integrated solution combining PowerPC processing with dedicated serial-channel handling. The QUICC Engine supports HDLC framing and TDM time-slot management, which are essential for legacy T1/E1 and DSLAM line cards. Its IEEE 1588 v2 hardware time-stamping capability enables precise timing distribution across telecom networks. The DDR2 memory controller interfaces with cost-effective commodity memory for packet buffering, and the 16-bit local bus connects to control-plane glue logic and FPGA co-processors. At 133 MHz, the core handles routing tables and management-plane software with predictable latency. The industrial temperature grade ensures operation in thermally constrained central-office environments.
推荐
Serial Protocol Concentrators
Designers building serial protocol concentrators benefit from the MPC8306SCVMABDCA's QUICC Engine, which terminates HDLC and TDM traffic deterministically without burdening the host CPU. This is critical for systems aggregating dozens of serial channels from sensors, controllers, or legacy telecom equipment. The device's 16-bit local bus allows connection to multiple external UARTs or framers, while the dual Ethernet ports aggregate traffic onto IP backhaul. At 133 MHz the e300c3 core runs management, statistics, and protocol-conversion software. The 369-PBGA MAP-BGA footprint supports miniaturized concentrator boards. Extended temperature operation enables deployment in outdoor cabinets and unconditioned industrial spaces.
推荐
Secure Embedded Routers
The MPC8306SCVMABDCA serves as the main processor in secure embedded routers used in branch-office and industrial networking. Its hardware-assisted security features, combined with the QUICC Engine for encrypted serial links, allow secure VPN tunnels and firewall processing. The dual 10/100 Ethernet MACs enable WAN and LAN segmentation, and the USB 2.0 Full-Speed port supports external storage or 3G/4G modems for backup connectivity. The 32-bit e300c3 core at 133 MHz runs embedded Linux with adequate performance for routing tables, NAT, and basic IDS functions. DDR2 memory support allows cost-effective expansion for routing-table storage. The MAP-BGA package keeps the router board compact for DIN-rail mounting.
推荐
POS and Retail Terminals
Retail point-of-sale and kiosk terminals can leverage the MPC8306SCVMABDCA for its combination of Ethernet, USB, and legacy serial support. The QUICC Engine handles payment-terminal serial protocols while the Ethernet MACs connect to store networks for transaction processing. The integrated USB 2.0 port supports peripherals such as barcode scanners, receipt printers, and customer displays. At 133 MHz with DDR2 memory, the core runs embedded Linux for payment applications, inventory lookups, and receipt rendering. The industrial temperature range suits deployments in non-climate-controlled retail back rooms. The compact MAP-BGA footprint enables slim kiosk form factors.
推荐
Legacy Industrial Control Boards
For legacy industrial control boards and PLC communication modules, the MPC8306SCVMABDCA offers a proven Power Architecture platform with long-term availability through authorized aftermarket sources. Its deterministic QUICC Engine handles proprietary serial protocols common in factory automation, while the Ethernet ports enable modern SCADA connectivity. The 16-bit local bus interfaces with industrial I/O expansion, and the DDR2 controller supports standard industrial memory modules. Extended -40C to +105C operation handles harsh factory environments. The 369-PBGA MAP-BGA package is compatible with existing board designs from earlier MPC8306 revisions, simplifying upgrades and replacements in installed machinery.
推荐
推荐产品汇总
工程参考数据： MPC8306SCVMABDCA ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MPC8306CVMABDCA | MPC8306VMABDCA | MPC8306SCVMADDCA | MPC8306SVMABDCA |
|---|---|---|---|---|---|
| Package | 369-PBGA MAP-BGA (19x19 mm) | 369-PBGA MAP-BGA (19x19 mm) - same | 369-PBGA MAP-BGA (19x19 mm) - same | 369-PBGA MAP-BGA (19x19 mm) - same | 369-PBGA MAP-BGA (19x19 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | PowerPC e300c3 | PowerPC e300c3 | PowerPC e300c3 | PowerPC e300c3 | PowerPC e300c3 (S-variant) |
| Maximum Frequency | 133 MHz | 133 MHz | 133 MHz | 133 MHz | 133 MHz |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| Ethernet | Dual 10/100 (R/MII) | Dual 10/100 (R/MII) | Dual 10/100 (R/MII) | Dual 10/100 (R/MII) | Reduced Ethernet |
| QUICC Engine | Yes (HDLC, TDM) | Yes (HDLC, TDM) | Yes (HDLC, TDM) | Yes (HDLC, TDM) | Limited QUICC Engine |
| IEEE 1588 v2 | Yes | Yes | Yes | Yes | No (S-variant) |
关键差异点
- Integrated QUICC Engine for HDLC/TDM offload （对比 MPC8306SVMABDCA)
- IEEE 1588 v2 hardware time-stamping （对比 MPC8306SVMABDCA)
- Dual 10/100 Ethernet MACs （对比 MPC8306SVMABDCA)
设计说明
The 369-ball MAP-BGA package requires careful PCB layout with microvia or via-in-pad technology for reliable assembly. Follow NXP hardware reference manual guidelines for BGA breakout routing, maintaining controlled impedance for DDR2 signals and Ethernet differential pairs. Decoupling capacitors should be placed as close as possible to power pins with short, wide traces.
The MPC8306SCVMABDCA requires multiple supply rails including core voltage and I/O voltage. Use a power sequencing circuit to ensure proper rail order during startup, preventing latch-up conditions. Bulk decoupling on each rail and high-frequency ceramic decoupling near the IC are essential for stable operation of the e300c3 core and QUICC Engine block.
Do not omit the QUICC Engine firmware (microcode) load during boot; the communications engines will not function without proper initialization. Ensure JTAG boundary scan access is preserved for board-level testing, and verify reset circuit timing meets the NXP datasheet specifications to avoid boot failures in production units.
合规信息
RoHS and REACH compliant per NXP product documentation. Not AEC-Q100 qualified - this is an industrial-grade communications processor, not an automotive part. Lead-free packaging confirmed.
