SI3215-C-FT - 3.13-5.25V Telecom SLIC/CODEC | Skyworks Solutions
料号: SI3215-C-FT ✓ 量产中SI3215-C-FT 概述
直接替换替代料: SI3215-C-FT ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: SI3215-C-FT (相同外形与封装尺寸) ——差异在于 Battery Supply, Package, Product Type, Telephone Functions.
SI3215-C-FT 规格参数
| Product Type | Subscriber Line Interface Concept (SLIC) and CODEC |
| Number of Channels | 1 channel |
| Supply Voltage Range | 3.13 V to 5.25 V |
| 电源电流 | 88 mA |
| Power Dissipation | 700 mW |
| 工作温度 | 0°C to 70°C |
| 封装 | 38-TSSOP |
| Package Type | 38-TFSOP, 4.40 mm width |
| Interfaces | GCI, PCM, SPI |
| Internal Ringing | Software-programmable, up to 90 VPK |
| Ringing Line Support | 5 REN at 4 kft; 3 REN at 8 kft |
| Telephone Functions | BORSCHT functions |
| DTMF Support | DTMF generation |
| Battery Supply | Integrated battery supply with dynamic operation |
| Country Signaling | Expanded support for Japan and China country requirements |
| Lead-Free Status | Lead-free |
| 安装类型 | Surface mount |
| Manufacturer | Skyworks Solutions |
SI3215-C-FT 38-tfsop, 4.40 mm width 引脚配置指南
SI3215-C-FT(38-tfsop, 4.40 mm width 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: SI3215-C-FT.
请参阅 数据手册 以查看完整引脚配置。
典型应用
SI3215-C-FT 适用于 6 应用s: Analog Telephone Adapter, Voice-over-IP Gateway, Customer Premises Equipment, Embedded Voice Communication System, Digital Transport Card, Telephony Test and Measurement Equipment.
Analog Telephone Adapter
The SI3215-C-FT is suitable for an analog telephone adapter because it combines one subscriber-line interface, CODEC, BORSCHT functions, DTMF generation, and programmable ringing in one device. Its GCI, PCM, and SPI connectivity allows the adapter to bridge an analog line to a digital voice processor. The 3.13 V to 5.25 V supply range fits common embedded voice platforms, while the 90 VPK internal ringing capability supports phone-call signaling. The 88 mA supply specification must be included in the host power budget, and the 700 mW listed dissipation should be checked against the TSSOP land pattern and ambient temperature.
推荐
Voice-over-IP Gateway
A voice-over-IP gateway can use the SI3215-C-FT as the analog subscriber-line interface in front of a packet-voice processor. The SLIC handles the physical telephone line, ringing generation, and BORSCHT line functions, while the PCM, GCI, or SPI interface carries voice and control traffic to the host. Programmable ringing up to 90 VPK and support for 5 REN at 4 kft or 3 REN at 8 kft help define line loading. Because this is a one-channel part, gateways requiring multiple simultaneous lines need additional SI3215 devices and careful clock, power, and grounding coordination.
推荐
Customer Premises Equipment
The SI3215-C-FT targets customer premises equipment that terminates one analog telephone line while providing a digital interface to an embedded controller. Its low-voltage CMOS operation from 3.13 V to 5.25 V supports compact commercial designs, and its integrated battery supply with dynamic operation assists line-state handling. The 38-TSSOP package is compatible with conventional surface-mount assembly. Design teams should use the manufacturer application circuit to establish line-network component values, protection requirements, and thermal copper, especially where ringing and off-hook power conditions coincide.
推荐
Embedded Voice Communication System
The SI3215-C-FT can serve as the line-facing element in an embedded voice communication system that needs telephone signaling, DTMF, and integrated codec functions. GCI and PCM connectivity supports systems organized around PCM transport, while SPI supports register-oriented control and configuration. The single-channel architecture simplifies board partitioning for one-line endpoints, and the 0°C to 70°C commercial operating range aligns with indoor customer equipment. Firmware configuration, host-driver support, and the exact external line-network topology remain critical system-level compatibility items.
推荐
Digital Transport Card
A single-line digital transport card can use the SI3215-C-FT when it must terminate an analog subscriber line and expose PCM or serial control to a line card. The device consolidates line termination, ringing generation, DTMF generation, codec operation, and signaling support rather than requiring separate line-interface blocks. Its 3.13 V to 5.25 V operating range allows integration with common embedded supply rails, subject to system-level sequencing. For dense cards, thermal analysis should account for 700 mW listed dissipation, and the external protection network must be rated for the programmed ringing voltage.
推荐
Telephony Test and Measurement Equipment
The SI3215-C-FT can provide a controllable analog-line endpoint in telephony test equipment that evaluates ring voltage, DTMF generation, line-state behavior, and codec communication. Software-programmable ringing up to 90 VPK allows test profiles to be adjusted for supported REN and loop-length conditions, while GCI, PCM, and SPI interfaces support different host architectures. The device's 88 mA supply current and 700 mW power specification should be included in instrumentation power and thermal budgets. Production testers should also account for the 0°C to 70°C operating range and required protection against external line transients.
推荐
推荐产品汇总
工程参考数据: SI3215-C-FT ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | SI3215-FT |
|---|---|---|
| Package | 38-TSSOP | 38-TSSOP |
| Brand | Skyworks Solutions | Skyworks Solutions |
| Product Type | Single-channel Subscriber Line Interface Concept and CODEC | Single-channel ProSLIC SLIC and CODEC |
| Number of Circuits | 1 | 1 |
关键差异点
- Commercial-temperature identification (对比 SI3215-FT)
- Integrated one-channel telephone interface (对比 SI3215-FT)
- Multiple digital connectivity options (对比 SI3215-FT)
设计说明
Design the supply rail for 88 mA supply current across the full 3.13 V to 5.25 V operating range. At 5.25 V, the nominal input power associated with 88 mA is approximately 0.462 W. This is an estimate, while the listed device power dissipation is 700 mW. Confirm startup current, battery-supply behavior, sequencing, and line-state transients against the manufacturer electrical-characteristics table before setting the power-supply limit.
Use the 700 mW listed power dissipation as the thermal-design starting point for the 38-TSSOP package. Provide copper around the device and minimize thermal coupling to sensitive analog sections. The operating range is 0°C to 70°C, so calculate worst-case junction temperature at the highest ambient temperature and under the line conditions that produce the greatest dissipation. The manufacturer application circuit should guide land-pattern and copper-area recommendations.
Separate the analog subscriber-line path from digital clock, SPI, PCM, and power-return routing. Keep the SLIC, external line-network components, and protection components in the same compact signal-chain region, while maintaining a continuous ground reference between the device and its external circuitry. Follow the manufacturer layout and application circuit for isolation gaps, surge protection, and component placement rather than inferring those values from the package drawing.
Do not substitute a similarly named SI3215 variant solely because it is available in a 38-pin package. Verify the temperature grade, supply limits, digital interfaces, firmware register map, ringing behavior, and exposed-pin or package details against the exact datasheet. The SI3215-C-FTR record represents a reel-order suffix and is not treated as a separate engineering alternative, while SI3215-FT still requires application-level compatibility confirmation.
合规信息
Lead-free status is listed for SI3215-C-FT. Explicit RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations were not identified in the available records.