SI3215-C-FT - 3.13-5.25V Telecom SLIC/CODEC | Skyworks Solutions
Teilenummer: SI3215-C-FT ✓ AktivSI3215-C-FT Übersicht
Drop-in-Alternativen für SI3215-C-FT – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit SI3215-C-FT (gleiche Bauform und Footprint) – abweichend in Battery Supply, Package, Product Type, Telephone Functions.
SI3215-FT
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →SI3215-C-FT Technische Daten
| Product Type | Subscriber Line Interface Concept (SLIC) and CODEC |
| Number of Channels | 1 channel |
| Supply Voltage Range | 3.13 V to 5.25 V |
| Versorgungsstrom | 88 mA |
| Power Dissipation | 700 mW |
| Betriebstemperatur | 0°C to 70°C |
| Gehäuse | 38-TSSOP |
| Package Type | 38-TFSOP, 4.40 mm width |
| Interfaces | GCI, PCM, SPI |
| Internal Ringing | Software-programmable, up to 90 VPK |
| Ringing Line Support | 5 REN at 4 kft; 3 REN at 8 kft |
| Telephone Functions | BORSCHT functions |
| DTMF Support | DTMF generation |
| Battery Supply | Integrated battery supply with dynamic operation |
| Country Signaling | Expanded support for Japan and China country requirements |
| Lead-Free Status | Lead-free |
| Montageart | Surface mount |
| Manufacturer | Skyworks Solutions |
SI3215-C-FT 38-tfsop, 4.40 mm width Pinbelegungsleitfaden
Pinbelegung für SI3215-C-FT (38-tfsop, 4.40 mm width-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für SI3215-C-FT.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
SI3215-C-FT ist geeignet für 6 Anwendungs: Analog Telephone Adapter, Voice-over-IP Gateway, Customer Premises Equipment, Embedded Voice Communication System, Digital Transport Card, Telephony Test and Measurement Equipment.
Analog Telephone Adapter
The SI3215-C-FT is suitable for an analog telephone adapter because it combines one subscriber-line interface, CODEC, BORSCHT functions, DTMF generation, and programmable ringing in one device. Its GCI, PCM, and SPI connectivity allows the adapter to bridge an analog line to a digital voice processor. The 3.13 V to 5.25 V supply range fits common embedded voice platforms, while the 90 VPK internal ringing capability supports phone-call signaling. The 88 mA supply specification must be included in the host power budget, and the 700 mW listed dissipation should be checked against the TSSOP land pattern and ambient temperature.
Empfohlen
Voice-over-IP Gateway
A voice-over-IP gateway can use the SI3215-C-FT as the analog subscriber-line interface in front of a packet-voice processor. The SLIC handles the physical telephone line, ringing generation, and BORSCHT line functions, while the PCM, GCI, or SPI interface carries voice and control traffic to the host. Programmable ringing up to 90 VPK and support for 5 REN at 4 kft or 3 REN at 8 kft help define line loading. Because this is a one-channel part, gateways requiring multiple simultaneous lines need additional SI3215 devices and careful clock, power, and grounding coordination.
Empfohlen
Customer Premises Equipment
The SI3215-C-FT targets customer premises equipment that terminates one analog telephone line while providing a digital interface to an embedded controller. Its low-voltage CMOS operation from 3.13 V to 5.25 V supports compact commercial designs, and its integrated battery supply with dynamic operation assists line-state handling. The 38-TSSOP package is compatible with conventional surface-mount assembly. Design teams should use the manufacturer application circuit to establish line-network component values, protection requirements, and thermal copper, especially where ringing and off-hook power conditions coincide.
Empfohlen
Embedded Voice Communication System
The SI3215-C-FT can serve as the line-facing element in an embedded voice communication system that needs telephone signaling, DTMF, and integrated codec functions. GCI and PCM connectivity supports systems organized around PCM transport, while SPI supports register-oriented control and configuration. The single-channel architecture simplifies board partitioning for one-line endpoints, and the 0°C to 70°C commercial operating range aligns with indoor customer equipment. Firmware configuration, host-driver support, and the exact external line-network topology remain critical system-level compatibility items.
Empfohlen
Digital Transport Card
A single-line digital transport card can use the SI3215-C-FT when it must terminate an analog subscriber line and expose PCM or serial control to a line card. The device consolidates line termination, ringing generation, DTMF generation, codec operation, and signaling support rather than requiring separate line-interface blocks. Its 3.13 V to 5.25 V operating range allows integration with common embedded supply rails, subject to system-level sequencing. For dense cards, thermal analysis should account for 700 mW listed dissipation, and the external protection network must be rated for the programmed ringing voltage.
Empfohlen
Telephony Test and Measurement Equipment
The SI3215-C-FT can provide a controllable analog-line endpoint in telephony test equipment that evaluates ring voltage, DTMF generation, line-state behavior, and codec communication. Software-programmable ringing up to 90 VPK allows test profiles to be adjusted for supported REN and loop-length conditions, while GCI, PCM, and SPI interfaces support different host architectures. The device's 88 mA supply current and 700 mW power specification should be included in instrumentation power and thermal budgets. Production testers should also account for the 0°C to 70°C operating range and required protection against external line transients.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für SI3215-C-FT – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | SI3215-FT |
|---|---|---|
| Package | 38-TSSOP | 38-TSSOP |
| Brand | Skyworks Solutions | Skyworks Solutions |
| Product Type | Single-channel Subscriber Line Interface Concept and CODEC | Single-channel ProSLIC SLIC and CODEC |
| Number of Circuits | 1 | 1 |
Wichtigste Unterscheidungsmerkmale
- Commercial-temperature identification (vs. SI3215-FT)
- Integrated one-channel telephone interface (vs. SI3215-FT)
- Multiple digital connectivity options (vs. SI3215-FT)
Designhinweise
Design the supply rail for 88 mA supply current across the full 3.13 V to 5.25 V operating range. At 5.25 V, the nominal input power associated with 88 mA is approximately 0.462 W. This is an estimate, while the listed device power dissipation is 700 mW. Confirm startup current, battery-supply behavior, sequencing, and line-state transients against the manufacturer electrical-characteristics table before setting the power-supply limit.
Use the 700 mW listed power dissipation as the thermal-design starting point for the 38-TSSOP package. Provide copper around the device and minimize thermal coupling to sensitive analog sections. The operating range is 0°C to 70°C, so calculate worst-case junction temperature at the highest ambient temperature and under the line conditions that produce the greatest dissipation. The manufacturer application circuit should guide land-pattern and copper-area recommendations.
Separate the analog subscriber-line path from digital clock, SPI, PCM, and power-return routing. Keep the SLIC, external line-network components, and protection components in the same compact signal-chain region, while maintaining a continuous ground reference between the device and its external circuitry. Follow the manufacturer layout and application circuit for isolation gaps, surge protection, and component placement rather than inferring those values from the package drawing.
Do not substitute a similarly named SI3215 variant solely because it is available in a 38-pin package. Verify the temperature grade, supply limits, digital interfaces, firmware register map, ringing behavior, and exposed-pin or package details against the exact datasheet. The SI3215-C-FTR record represents a reel-order suffix and is not treated as a separate engineering alternative, while SI3215-FT still requires application-level compatibility confirmation.
Compliance-Informationen
Lead-free status is listed for SI3215-C-FT. Explicit RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations were not identified in the available records.