SI3215-C-FT - 3.13-5.25V Telecom SLIC/CODEC | Skyworks Solutions
MPN: SI3215-C-FT ✓ 啟用中SI3215-C-FT 概覽
直接替換替代品,適用於 SI3215-C-FT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: SI3215-C-FT (相同外形與佔位) — 差異在於 Battery Supply, Package, Product Type, Telephone Functions.
SI3215-C-FT 規格
| Product Type | Subscriber Line Interface Concept (SLIC) and CODEC |
| Number of Channels | 1 channel |
| Supply Voltage Range | 3.13 V to 5.25 V |
| 供應電流 | 88 mA |
| Power Dissipation | 700 mW |
| 工作溫度 | 0°C to 70°C |
| 封裝 | 38-TSSOP |
| Package Type | 38-TFSOP, 4.40 mm width |
| Interfaces | GCI, PCM, SPI |
| Internal Ringing | Software-programmable, up to 90 VPK |
| Ringing Line Support | 5 REN at 4 kft; 3 REN at 8 kft |
| Telephone Functions | BORSCHT functions |
| DTMF Support | DTMF generation |
| Battery Supply | Integrated battery supply with dynamic operation |
| Country Signaling | Expanded support for Japan and China country requirements |
| Lead-Free Status | Lead-free |
| 安裝類型 | Surface mount |
| Manufacturer | Skyworks Solutions |
SI3215-C-FT 38-tfsop, 4.40 mm width 腳位配置指南
SI3215-C-FT(38-tfsop, 4.40 mm width 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: SI3215-C-FT.
請參閱 資料表 以查看完整腳位配置。
典型應用
SI3215-C-FT 適用於 6 應用s: Analog Telephone Adapter, Voice-over-IP Gateway, Customer Premises Equipment, Embedded Voice Communication System, Digital Transport Card, Telephony Test and Measurement Equipment.
Analog Telephone Adapter
The SI3215-C-FT is suitable for an analog telephone adapter because it combines one subscriber-line interface, CODEC, BORSCHT functions, DTMF generation, and programmable ringing in one device. Its GCI, PCM, and SPI connectivity allows the adapter to bridge an analog line to a digital voice processor. The 3.13 V to 5.25 V supply range fits common embedded voice platforms, while the 90 VPK internal ringing capability supports phone-call signaling. The 88 mA supply specification must be included in the host power budget, and the 700 mW listed dissipation should be checked against the TSSOP land pattern and ambient temperature.
推薦
Voice-over-IP Gateway
A voice-over-IP gateway can use the SI3215-C-FT as the analog subscriber-line interface in front of a packet-voice processor. The SLIC handles the physical telephone line, ringing generation, and BORSCHT line functions, while the PCM, GCI, or SPI interface carries voice and control traffic to the host. Programmable ringing up to 90 VPK and support for 5 REN at 4 kft or 3 REN at 8 kft help define line loading. Because this is a one-channel part, gateways requiring multiple simultaneous lines need additional SI3215 devices and careful clock, power, and grounding coordination.
推薦
Customer Premises Equipment
The SI3215-C-FT targets customer premises equipment that terminates one analog telephone line while providing a digital interface to an embedded controller. Its low-voltage CMOS operation from 3.13 V to 5.25 V supports compact commercial designs, and its integrated battery supply with dynamic operation assists line-state handling. The 38-TSSOP package is compatible with conventional surface-mount assembly. Design teams should use the manufacturer application circuit to establish line-network component values, protection requirements, and thermal copper, especially where ringing and off-hook power conditions coincide.
推薦
Embedded Voice Communication System
The SI3215-C-FT can serve as the line-facing element in an embedded voice communication system that needs telephone signaling, DTMF, and integrated codec functions. GCI and PCM connectivity supports systems organized around PCM transport, while SPI supports register-oriented control and configuration. The single-channel architecture simplifies board partitioning for one-line endpoints, and the 0°C to 70°C commercial operating range aligns with indoor customer equipment. Firmware configuration, host-driver support, and the exact external line-network topology remain critical system-level compatibility items.
推薦
Digital Transport Card
A single-line digital transport card can use the SI3215-C-FT when it must terminate an analog subscriber line and expose PCM or serial control to a line card. The device consolidates line termination, ringing generation, DTMF generation, codec operation, and signaling support rather than requiring separate line-interface blocks. Its 3.13 V to 5.25 V operating range allows integration with common embedded supply rails, subject to system-level sequencing. For dense cards, thermal analysis should account for 700 mW listed dissipation, and the external protection network must be rated for the programmed ringing voltage.
推薦
Telephony Test and Measurement Equipment
The SI3215-C-FT can provide a controllable analog-line endpoint in telephony test equipment that evaluates ring voltage, DTMF generation, line-state behavior, and codec communication. Software-programmable ringing up to 90 VPK allows test profiles to be adjusted for supported REN and loop-length conditions, while GCI, PCM, and SPI interfaces support different host architectures. The device's 88 mA supply current and 700 mW power specification should be included in instrumentation power and thermal budgets. Production testers should also account for the 0°C to 70°C operating range and required protection against external line transients.
推薦
推薦產品摘要
工程參考資料,適用於 SI3215-C-FT — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | SI3215-FT |
|---|---|---|
| Package | 38-TSSOP | 38-TSSOP |
| Brand | Skyworks Solutions | Skyworks Solutions |
| Product Type | Single-channel Subscriber Line Interface Concept and CODEC | Single-channel ProSLIC SLIC and CODEC |
| Number of Circuits | 1 | 1 |
主要差異化特點
- Commercial-temperature identification (對比SI3215-FT)
- Integrated one-channel telephone interface (對比SI3215-FT)
- Multiple digital connectivity options (對比SI3215-FT)
設計說明
Design the supply rail for 88 mA supply current across the full 3.13 V to 5.25 V operating range. At 5.25 V, the nominal input power associated with 88 mA is approximately 0.462 W. This is an estimate, while the listed device power dissipation is 700 mW. Confirm startup current, battery-supply behavior, sequencing, and line-state transients against the manufacturer electrical-characteristics table before setting the power-supply limit.
Use the 700 mW listed power dissipation as the thermal-design starting point for the 38-TSSOP package. Provide copper around the device and minimize thermal coupling to sensitive analog sections. The operating range is 0°C to 70°C, so calculate worst-case junction temperature at the highest ambient temperature and under the line conditions that produce the greatest dissipation. The manufacturer application circuit should guide land-pattern and copper-area recommendations.
Separate the analog subscriber-line path from digital clock, SPI, PCM, and power-return routing. Keep the SLIC, external line-network components, and protection components in the same compact signal-chain region, while maintaining a continuous ground reference between the device and its external circuitry. Follow the manufacturer layout and application circuit for isolation gaps, surge protection, and component placement rather than inferring those values from the package drawing.
Do not substitute a similarly named SI3215 variant solely because it is available in a 38-pin package. Verify the temperature grade, supply limits, digital interfaces, firmware register map, ringing behavior, and exposed-pin or package details against the exact datasheet. The SI3215-C-FTR record represents a reel-order suffix and is not treated as a separate engineering alternative, while SI3215-FT still requires application-level compatibility confirmation.
合規資訊
Lead-free status is listed for SI3215-C-FT. Explicit RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations were not identified in the available records.