Texas Instruments

TLV2404IN - 16V Quad 5.5kHz RRIO Op Amp | Texas Instruments

料号: TLV2404IN ✓ 量产中
16 V Vdss Approximately 880 nA per channel Id PDIP (N) Package
最小起订量: 1 |

TLV2404IN 概述

Texas Instruments TLV2404IN is a quad, rail-to-rail input/output operational amplifier rated for supplies up to 16 V, with a 5.5 kHz gain-bandwidth product and approximately 880 nA per channel of quiescent current. The device is packaged in a 14-pin PDIP (N) package and operates across a -40 °C to 125 °C temperature range. It is designed for low-power signal conditioning where four amplifiers, low supply current, and rail-to-rail input and output capability are useful in the same circuit.

An operational amplifier is an analog signal-processing IC that uses high open-loop gain to amplify the difference between two input voltages. A rail-to-rail input stage accepts common-mode voltages across most of the supply range, while a rail-to-rail output stage can swing close to either supply rail. Within the amplifier hierarchy, the TLV2404IN belongs to the micropower operational-amplifier class and supports applications such as sensor conditioning, battery-powered instrumentation, current measurement, filtering, and low-frequency control loops.

Key features include four amplifier channels in one package, a 5.5 kHz gain-bandwidth product, rail-to-rail inputs and outputs, reverse-battery protection, and an approximately 880 nA per-channel quiescent current. Reverse-battery protection is particularly useful in portable systems where a misconnected battery can place reverse voltage across the device. The slow 5.5 kHz bandwidth favors low-frequency precision and sensing functions rather than high-speed signal processing.

The TLV2404IN combines four rail-to-rail amplifiers with a micropower bias architecture. Its low quiescent current reduces supply drain in continuously powered equipment, while the wide common-mode input capability simplifies buffering of sensors whose operating range lies close to a supply rail. Because this is a general-purpose amplifier rather than a high-speed comparator, designers should account for its limited gain-bandwidth product when setting filter poles, closed-loop gain, and required settling behavior.

Typical applications include portable battery-powered monitors, industrial sensor interfaces, low-frequency active filters, current-sense amplifier signal chains, and general-purpose analog instrumentation. A four-channel implementation can reduce board area when several independent low-frequency signals require amplification, provided each channel's noise, offset, common-mode range, and stability requirements are compatible.

When designing around the TLV2404IN, check source and sink current capability at the chosen output voltage, place decoupling capacitors close to the supply pins, and confirm that each feedback network supports the intended operating frequency. Avoid treating reverse-battery protection as a substitute for correct battery polarity or for a dedicated fuse and protection network.

This product page consolidates the exact TLV2404IN device characteristics, family-level alternatives, application guidance, pin-package constraints, and practical design notes into an engineering-focused reference for evaluating the amplifier before PCB implementation.

直接替换替代料: TLV2404IN ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: TLV2404IN (相同外形与封装尺寸) ——差异在于 Reverse-Battery Protection.

Texas Instruments
Reverse-Battery Protection: Advertised in the TLV2404 family description
对比 TLV2404IN →

TLV2404CN

✅ 直接替换 ⚠️ 规格未核验
Texas Instruments
📦 PDIP-14 (N)
4 channels · Quad rail-to-rail input/output operational amplifier · 16 V · 5.5 kHz · Rail-to-rail · Rail-to-rail

联系询价

查看数据手册 →

TLV2404IP

✅ 直接替换 ⚠️ 规格未核验
📦 PDIP-14 (N)
Same TLV2404 four-channel amplifier family and PDIP-14 footprint, with ordering-suffix temperature or qualification differences that require verification

📋 参考替代料(不在目录中)

TLV2404INE4

✅ 直接替换
📦 PDIP-14 (N)
Same TLV2404IN device and 14-pin PDIP configuration, with the E4 suffix identifying a different ordering or qualification context

📋 参考替代料(不在目录中)

TLV2404IN 最大额定值与电气特性

Number of Amplifier Channels 4 channels
Maximum Supply Voltage 16 V
Gain-Bandwidth Product 5.5 kHz
静态电流 Approximately 880 nA per channel
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Reverse-Battery Protection Supported
工作温度范围 -40 °C to 125 °C
Package Type PDIP (N)
引脚数 14 pins
安装类型 Through-hole
Product Type Quad micropower rail-to-rail input/output operational amplifier
Operating Class General-purpose amplifier
Primary Device Family TLV2404
Supplier Segment Instrumentation and operational-amplifier applications

TLV2404IN pdip (n) 引脚配置指南

TLV2404IN(pdip (n) 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

TLV2404IN 的 pdip (n) 封装引脚图

暂无详细引脚数据: TLV2404IN.

请参阅 数据手册 以查看完整引脚配置。

典型应用

TLV2404IN 适用于 6 应用s: Battery-Powered Sensor Conditioning, Industrial Process Measurement, Low-Frequency Active Filtering, Portable Medical Monitoring, Current Measurement Signal Chain, Data Acquisition Interface.

🔋

Battery-Powered Sensor Conditioning

The TLV2404IN suits low-frequency sensor-conditioning channels because four rail-to-rail amplifiers are integrated in one 14-pin PDIP package and quiescent current is approximately 880 nA per channel. A current sensor, thermistor, or resistive bridge can be conditioned with separate amplifier stages while keeping continuous supply drain low. The rail-to-rail input stage helps accept signals near the supply limits, and the rail-to-rail output stage provides more usable output range than a fixed-rail implementation. Because the gain-bandwidth product is 5.5 kHz, this device is intended for slow measurements rather than fast transients.

🏭

Industrial Process Measurement

The TLV2404IN can condition several low-frequency industrial process signals when the design requires a common quad-amplifier package and a 16 V maximum supply rating. Each channel may buffer a thermocouple interface, pressure-sensor signal, or scaled plant-control voltage. Rail-to-rail inputs and outputs improve headroom when operating from lower supply voltages, while approximately 880 nA per channel is valuable in remotely powered instrumentation. The 5.5 kHz bandwidth is adequate for slow process variables, but loop compensation and sensor-response requirements must be checked to ensure the resulting closed-loop bandwidth remains sufficient.

🔧

Low-Frequency Active Filtering

The TLV2404IN is appropriate for active filters and shaping networks operating below its 5.5 kHz gain-bandwidth product. Four channels can implement two cascaded second-order filters, a fourth-order low-pass or high-pass section, or several separate signal-conditioning stages. Rail-to-rail operation helps preserve signal amplitude in low-voltage systems, while the approximately 880 nA per-channel bias supports compact, low-power monitoring equipment. Component selection should account for closed-loop gain, noise gain, output loading, and the amplifier's phase-margin behavior rather than treating 5.5 kHz as a guaranteed usable filter cutoff.

💊

Portable Medical Monitoring

The TLV2404IN can support low-frequency conditioning paths in portable monitoring equipment where four amplifier channels and low quiescent current simplify power budgeting. A bridge sensor, bio-sensor analog front end, or patient-monitoring transducer may use separate channels for buffering, gain, filtering, and output drive. The -40 °C to 125 °C rating provides a broad environmental range, while rail-to-rail inputs and outputs help use the available supply voltage efficiently. Medical-system designers must separately validate patient protection, isolation, leakage, electromagnetic compatibility, and applicable regulatory requirements for the finished instrument.

⚡

Current Measurement Signal Chain

The TLV2404IN is useful after a current-sense amplifier when the system requires additional filtering, level shifting, or output buffering across multiple channels. Its approximately 880 nA per-channel quiescent current minimizes overhead in portable or distributed power systems, and the 16 V maximum supply rating supports common industrial and automotive-style rails when the complete signal path meets the device limits. The rail-to-rail output can improve utilization of the output range. Applications needing faster transient capture or very low amplifier noise should compare the TLV2404's 5.5 kHz bandwidth against their measurement bandwidth.

🖥️

Data Acquisition Interface

The TLV2404IN can provide buffering and channel conditioning ahead of a moderately slow data-acquisition system. Four independent channels may handle analog inputs from sensors, dividers, or level-shifting networks, while the 5.5 kHz gain-bandwidth product suits sampled measurements whose relevant signal content is low frequency. Rail-to-rail inputs help accommodate sensor outputs that approach the supply range, and the low quiescent current supports compact multi-channel acquisition equipment. The ADC, sampling rate, anti-alias filter, settling requirements, and input-source impedance must be evaluated together to verify the complete acquisition path.

What are the key specifications of TLV2404IN that engineers should know?
The TLV2404IN is a four-channel, 5.5 kHz gain-bandwidth micropower operational amplifier with rail-to-rail inputs and outputs, a maximum 16 V supply rating, and approximately 880 nA quiescent current per channel. According to the Texas Instruments TLV2404 datasheet, the device uses reverse-battery protection and is offered in a 14-pin PDIP package for an operating temperature range of -40 °C to 125 °C. Its four independent channels can amplify, buffer, or filter four low-frequency analog signals while consuming substantially less current than many general-purpose operational amplifiers.
What is the operating voltage range of TLV2404IN?
The TLV2404IN supports operation from a low-voltage supply up to a maximum of 16 V. According to the Texas Instruments TLV2404 product page and datasheet, the device is a quad rail-to-rail input/output operational amplifier intended for low-power, wide-supply applications. Because the input and output stages operate rail-to-rail, the usable signal range can extend close to either supply rail. The exact minimum operating voltage, absolute maximum supply limits, and per-rail input limits should be confirmed in the manufacturer datasheet before finalizing a design.
Where can I download the TLV2404IN datasheet PDF?
The official TLV2404IN datasheet can be downloaded from the Texas Instruments product page at https://www.ti.com/product/TLV2404 or directly from the manufacturer document link at https://www.ti.com/lit/gpn/TLV2404. The document contains the device family description, electrical characteristics, pin configuration, typical performance curves, application guidance, and ordering information. Use the Texas Instruments document for design decisions because its electrical limits and test conditions are the authoritative reference for the TLV2404IN.
Where can I find the TLV2404IN pinout and package information?
The TLV2404IN uses a 14-pin PDIP package identified as package N, and its complete numbered pin configuration is shown in the pin-configuration section of the Texas Instruments TLV2404 datasheet. The family contains four operational amplifiers, so designers must distinguish each amplifier's offset, non-inverting, inverting, output, and supply connections rather than assuming a standard dual or quad pinout. Use the manufacturer pin-description table and package drawing when assigning PCB holes and routing each channel.
Is TLV2404IN suitable for battery-powered sensor interfaces?
Yes, the TLV2404IN is well suited to battery-powered sensor interfaces because it combines approximately 880 nA quiescent current per channel with rail-to-rail inputs and outputs. According to the Texas Instruments TLV2404 datasheet, reverse-battery protection is also provided. These characteristics help conserve energy while accommodating sensor signals near the supply rails. The 5.5 kHz gain-bandwidth product is suitable for low-frequency sensing, conditioning, and filtering, but it is not appropriate for high-speed waveform tasks.
What can replace TLV2404IN on the same 14-pin PDIP footprint?
The closest verified family alternatives are TLV2404CN, TLV2404IP, and TLV2404INE4, but each replacement must be checked for its exact temperature grade, suffix, and pin configuration before substitution. The TLV2404IN is a 14-pin PDIP device in the TLV2404 four-amplifier family, so not every TLV2404 ordering code is a true drop-in replacement. Confirm the pinout, supply range, common-mode range, quiescent current, and required temperature grade against the manufacturer datasheet. Use the Request a Quote form on this page when sourcing the exact TLV2404IN configuration.
What is the difference between TLV2404IN and TLV2404IP?
TLV2404IN and TLV2404IP belong to the same Texas Instruments TLV2404 four-channel operational-amplifier family, but their ordering suffixes identify different temperature and package variants. The TLV2404IN is identified as a -40 °C to 125 °C, 14-pin PDIP device, while TLV2404IP may not satisfy the same temperature-grade requirement in every BOM configuration. Check the ordering table for both complete MPNs before treating TLV2404IP as a drop-in replacement for a design specified around the TLV2404IN.
TLV2404IN vs TLV2404CN - which is better for industrial equipment?
Choose TLV2404IN for industrial equipment when the assembly must support the -40 °C to 125 °C operating range specified for that device. TLV2404CN may be appropriate for a narrower commercial temperature grade, but its suffix must be checked before use. Both parts are members of the same four-channel, 16 V, 5.5 kHz TLV2404 family. The decisive comparison is therefore operating temperature, followed by package, pinout, and exact electrical limits rather than the amplifier family name alone.
When should I choose TLV2404IN instead of a higher-bandwidth op amp?
Choose TLV2404IN when the design emphasizes low quiescent current, rail-to-rail operation, and low-frequency signal conditioning rather than wideband performance. Its 5.5 kHz gain-bandwidth product is suitable for slow sensor signals, active filters, and buffered measurements, while approximately 880 nA per channel helps limit continuous supply drain. If the signal path requires video bandwidth, fast settling, or high-frequency accuracy, a higher-bandwidth amplifier will usually provide more suitable gain error and phase-margin behavior.
How much thermal dissipation does TLV2404IN produce at 16 V?
The TLV2404IN has a specified maximum supply voltage of 16 V and approximately 880 nA quiescent current per channel. Estimated: using 16 V and 3.52 mA total quiescent current, the no-load supply dissipation is about 56.3 mW before output-current and input-bias effects are included. Actual dissipation increases with output drive current and depends on the voltage dropped across the amplifier. Because the PDIP package can transfer heat through its leads, verify the worst-case ambient temperature, load current, and PCB copper using the manufacturer thermal information.
Is TLV2404IN still active and suitable for new designs?
The Texas Instruments product page continues to identify the TLV2404 family and TLV2404IN orderable configuration, so the device is treated as active for this product record. It is listed as a quad, 16 V, 5.5 kHz operational amplifier in a 14-pin PDIP package. New designs should still confirm ordering, lifecycle, and delivery status through the Request a Quote form on this page because production status and channel availability can change over time.
Where to buy TLV2404IN online?
Use the Request a Quote form on this page to request TLV2404IN availability, unit pricing, lot information, and lead time. The form is the appropriate route for an exact-MPN purchase request covering the 14-pin PDIP configuration and extended temperature grade. It avoids confusion with other TLV2404 suffixes or surface-mount package variants. Include the required quantity, target date, and acceptable package form in the request so the quotation reflects the correct device.
What is the price of TLV2404IN?
Current TLV2404IN pricing is generated through the Request a Quote form on this page rather than presented as a static quotation. Submit the required quantity and desired shipment date to obtain the applicable unit and volume-break terms. The quote should be tied specifically to TLV2404IN, the 14-pin PDIP package, and the -40 °C to 125 °C device configuration rather than a generic TLV2404 family listing.
Is TLV2404IN in stock and what is the lead time?
Stock and lead time depend on the requested quantity and the current channel position for the exact TLV2404IN ordering code. Use the Request a Quote form on this page to request current availability, factory lead time, and the earliest shipment plan. Include a target consumption schedule if long-term continuity matters. Do not infer availability from a family-level product page because individual suffixes and package configurations can have different lead times.
Can TLV2404IN be used for active filters and low-frequency control loops?
Yes, TLV2404IN can be used for active filters and low-frequency control loops because its 5.5 kHz gain-bandwidth product supports modest closed-loop bandwidths and its rail-to-rail input and output stages provide useful signal-range flexibility. Set resistor and capacitor values against the closed-loop bandwidth and noise-gain curve rather than using the open-loop gain-bandwidth value directly. Confirm stability, output loading, and settling requirements in the typical-performance section of the Texas Instruments TLV2404 datasheet.

工程参考数据: TLV2404IN ——对比、设计指导和合规信息。

选型指南

Choose TLV2404IN for low-frequency analog designs that need four rail-to-rail amplifiers, a 16 V maximum supply rating, approximately 880 nA per-channel quiescent current, and a -40 °C to 125 °C operating range in a 14-pin PDIP package. It is particularly suitable for battery-powered sensing, industrial process measurement, and multiple-channel filtering where 5.5 kHz bandwidth is sufficient. Consider TLV2404CN when its exact temperature grade matches the product and its ordering details satisfy the BOM; consider TLV2404IP only after confirming its suffix, temperature range, and pin configuration. TLV2404INE4 is an ordering-context alternative that should be selected only after checking qualification and procurement requirements. For high-speed acquisition, video signals, or precision dynamics, select an amplifier with greater bandwidth and corresponding noise, offset, and power characteristics.

与替代料对比

参数 本产品 TLV2404CN TLV2404IP TLV2404INE4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package PDIP-14 (N) PDIP-14 (N) PDIP-14 (N) PDIP-14 (N)
Number of Channels 4 channels 4 channels 4 channels 4 channels
Maximum Supply Voltage 16 V 16 V 16 V 16 V
Gain-Bandwidth Product 5.5 kHz 5.5 kHz 5.5 kHz 5.5 kHz
Input Common-Mode Range Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Output Swing Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail

关键差异点

  • Four rail-to-rail amplifiers in one through-hole package (对比 TLV2404IP)
  • Low-power bias supports continuous instrumentation (对比 TLV2404CN)
  • Exact TLV2404IN ordering configuration (对比 TLV2404INE4)

设计说明

Route each amplifier's supply and ground connections directly to the nearest package pins, and place the supply-decoupling capacitor close to the device. For a four-channel package, separate analog input traces from output and supply paths to reduce coupling between channels. Keep feedback components close to the relevant amplifier inputs and outputs so parasitic capacitance does not destabilize the 5.5 kHz-gain-bandwidth device.

Do not treat reverse-battery protection as a complete battery-safety solution. Verify the exact protection conditions, absolute maximum ratings, input-current limits, and supply polarity in the Texas Instruments TLV2404 datasheet. A fuse, reverse-polarity controller, or discrete protection network may still be required where a misconnected battery could exceed those limits. Also verify that every alternative suffix preserves the same 14-pin PDIP footprint and required temperature range.

The 5.5 kHz gain-bandwidth product limits the useful closed-loop bandwidth even though the input and output stages are rail-to-rail. Calculate the required noise gain at the target frequency and check the expected phase margin. For an inverting amplifier, the feedback impedance seen by the inverting input can increase effective noise gain and reduce stability, so verify the complete resistor-capacitor network rather than relying only on the nominal signal gain.

Estimated: using a 16 V supply and 3.52 mA total quiescent current for four channels, the no-load supply dissipation is approximately 56.3 mW. Output-current dissipation must be added using the voltage dropped across each active amplifier. The PDIP package removes heat primarily through its leads, so place it where warm air can flow and avoid enclosing it in an insulating enclosure without a thermal path.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The TLV2404IN is a general-purpose operational amplifier rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact ordering code.

数据核验日期: 2026-11-19 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

TLV2404IN datasheet TLV2404IN datasheet pdf TLV2404IN pinout TLV2404IN equivalent TLV2404IN replacement TLV2404IN cross reference TLV2404IN vs TLV2404IP TLV2404IN footprint TLV2404IN application circuit Texas Instruments TLV2404IN TLV2404IN 16V op amp TLV2404IN 5.5kHz amplifier TLV2404IN price TLV2404IN stock

相关元器件 & 术语

Texas Instruments TLV2404IN TLV2404 TLV2404CN TLV2404IP TLV2404INE4 operational amplifier quad operational amplifier micropower operational amplifier rail-to-rail input rail-to-rail output low-dropout regulator analog signal conditioning reverse-battery protection gain-bandwidth product quiescent current common-mode input range active filter PDIP-14 N package through-hole package 5.5 kHz 16 V -40 °C to 125 °C battery-powered instrumentation
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情