XC6SLX150T-2FG484I - 147K Logic Cell FPGA | AMD
料号: XC6SLX150T-2FG484I ✗ 停产XC6SLX150T-2FG484I 概述
A field-programmable gate array, or FPGA, is a programmable semiconductor in which digital logic, interconnect, and embedded resources are configured after manufacture. Within the product hierarchy, the XC6SLX150T belongs to the Spartan-6 family, the LXT performance series, and the broader FPGA and programmable-logic device category. This combination of high logic density, integrated resources, and a large BGA package makes the device suitable for complex control, interface, and signal-processing systems.
The device provides 147,443 logic cells in the Spartan-6 LXT architecture. Its 45 nm CMOS process and 1.2 V core operating voltage are suited to compact, power-conscious industrial and embedded platforms. Depending on the exact device configuration and documented I/O allocation, the listed package is identified as a 484-BBGA or 484-FBGA with either 296 or 338 available I/O connections. Engineers should confirm the final pin-level assignment, configuration pins, clock resources, and differential I/O requirements against the manufacturer datasheet.
Spartan-6 devices combine configurable logic with block RAM, digital signal processing resources, clock-management capabilities, and programmable I/O. The LXT family is positioned for designs that need more logic and interface resources than the smaller LX devices. This makes the XC6SLX150T useful when a design must consolidate parallel interfaces, protocol handling, control logic, and data acquisition functions into one programmable device.
Typical applications include industrial automation, test and measurement equipment, video and image processing, communications infrastructure, automotive infotainment, embedded instrumentation, and high-speed interface bridges. In these systems, configurable logic can absorb protocol conversion and timing functions while embedded resources support buffering, data paths, and signal processing. The large BGA package also supports dense board layouts but requires careful escape routing and multilayer PCB construction.
The primary design considerations are BGA fanout, power-plane distribution, decoupling, configuration-system completeness, and thermal performance. Place stable decoupling close to the supply pins, follow the package ball-map and recommended via pattern, and provide the specified configuration interface before asserting reset. Differential pairs and high-speed memory interfaces also require controlled impedance and continuous return paths.
This page consolidates the available device identity, package information, lifecycle context, pin-compatible family alternatives, sourcing questions, and design guidance. It also distinguishes documented differences among speed-grade and temperature-grade variants, helping engineers choose a replacement without assuming that every 484-ball Spartan-6 device is electrically or commercially equivalent.
直接替换替代料: XC6SLX150T-2FG484I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC6SLX150T-2FG484I (相同外形与封装尺寸) ——差异在于 Core Supply Voltage, Device Type, Logic Cells, Package.
XC6SLX150-2FGG484I
✅ 直接替换📋 参考替代料(不在目录中)
XC6SLX150T-2FGG484C
✅ 直接替换📋 参考替代料(不在目录中)
XC6SLX150-2FGG484C
✅ 直接替换📋 参考替代料(不在目录中)
XC6SLX150-3FGG484I
✅ 直接替换联系询价
查看数据手册 →XC6SLX150-2FG484I
✅ 直接替换联系询价
查看数据手册 →XC6SLX150T-2FG484I 最大额定值与电气特性
| Device Type | Spartan-6 LXT field-programmable gate array |
| Logic Cells | 147,443 logic cells |
| Process Technology | 45 nm CMOS |
| Core Supply Voltage | 1.2 V |
| 封装 | 484-ball BGA |
| Package Designation | 484-BBGA / 484-FBGA |
| I/O Count | 296 or 338 I/O, depending on listed source |
| Spartan-6 Family Density Range | 3,400 to 148,000 logic cells |
| Performance Grade | Speed grade -2 |
| Temperature Grade | Industrial grade indicated by suffix I |
| 安装类型 | Surface mount |
XC6SLX150T-2FG484I 484-bbga / 484-fbga 引脚配置指南
XC6SLX150T-2FG484I(484-bbga / 484-fbga 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC6SLX150T-2FG484I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC6SLX150T-2FG484I 适用于 6 应用s: Industrial Automation Controller, Video and Image Processing, Test and Measurement Instrumentation, Automotive Infotainment Bridge, Communications Protocol Concentrator, Embedded Instrumentation and Data Acquisition.
Industrial Automation Controller
The XC6SLX150T-2FG484I fits an industrial automation controller that must coordinate multiple machine interfaces while retaining deterministic timing. Its 147,443 logic cells can support protocol conversion, sequencing logic, fault handling, and supervisory control without splitting the design across several programmable devices. The 484-ball BGA also offers a substantial pin budget for digital I/O, communications, and external memory. In implementation, engineers should partition high-speed interfaces, clock domains, and power planes carefully, then validate timing at the -2 speed grade against the industrial operating-temperature requirement.
推荐
Video and Image Processing
The XC6SLX150T-2FG484I is suitable for video capture, image processing, and display-interface bridging because its 147,443 logic cells can combine parallel-to-serial conversion, pixel processing, timing control, and command handling. The large BGA package provides connections for high-speed pixel data, control signals, memory, and external converters. Design partitioning should place pixel buses and clocked interfaces in regular logic regions, use controlled-impedance routing for high-speed links, and verify clock-domain crossings with static timing analysis. The -2 speed grade must also satisfy the worst-case pixel-clock and memory-interface requirements.
推荐
Test and Measurement Instrumentation
The XC6SLX150T-2FG484I can serve as the programmable acquisition and control core in oscilloscopes, logic analyzers, and automated test equipment. Its 147,443 logic cells allow parallel data acquisition, trigger processing, pattern generation, and instrument-control logic to share one FPGA while block RAM and DSP resources handle buffered data operations. The 484-ball BGA supports wide parallel buses and multiple converters, but fanout density requires multilayer construction and careful decoupling. Engineers should budget timing margin for trigger paths and verify board-level channel skew at the selected -2 operating conditions.
推荐
Automotive Infotainment Bridge
The XC6SLX150T-2FG484I is well suited to automotive infotainment bridge and interface-conversion designs because it combines high logic density with a large I/O package. The FPGA can translate display, audio-control, networking, and vehicle-network signals while implementing command arbitration and diagnostic handling in hardware. The industrial-temperature suffix supports extended-temperature use, although final automotive qualification requires confirming the device's exact temperature range and supporting production requirements. Layout must preserve power integrity, high-speed return paths, and automotive transient protection margins around the FPGA.
推荐
Communications Protocol Concentrator
The XC6SLX150T-2FG484I can consolidate several communications protocols in one configurable logic device. Its 147,443 logic cells provide capacity for framing, packet routing, buffer management, clock-domain crossing, and interface adaptation across parallel, serial, and memory buses. Using one FPGA instead of several smaller devices can reduce board area and simplify synchronization, although the design must be partitioned by clock domain and traffic class to prevent congestion around the processor or memory interfaces. The 484-ball package also requires deliberate escape-routing and via-in-pad or microvia decisions during PCB stack-up review.
推荐
Embedded Instrumentation and Data Acquisition
The XC6SLX150T-2FG484I fits embedded instrumentation systems that combine sensor conditioning, digital conversion, local processing, and communications. Its 147,443 logic cells can implement calibration tables, digital filters, timing control, status logging, and communication framing, reducing reliance on external programmable logic. The 484-ball BGA provides access to wide sensor buses and memory, while the -2 speed grade supports designs developed around the original Spartan-6 LXT timing class. Thermal and power planning should account for activity-dependent FPGA consumption, and decoupling must be placed according to the manufacturer layout guidance.
推荐
推荐产品汇总
工程参考数据: XC6SLX150T-2FG484I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC6SLX150-2FGG484I | XC6SLX150T-2FGG484C | XC6SLX150-2FGG484C | XC6SLX150-3FGG484I | XC6SLX150-2FG484I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 484-BBGA | 484-BBGA | 484-BBGA | 484-BBGA | 484-BBGA | 484-BBGA |
| FPGA Family | Spartan-6 LXT | Spartan-6 LXT | Spartan-6 LXT | Spartan-6 LXT | Spartan-6 LXT | Spartan-6 LXT |
| Logic Cells | 147,443 logic cells | 147,443 logic cells | 147,443 logic cells | 147,443 logic cells | 147,443 logic cells | 147,443 logic cells |
| Speed Grade | -2 | -2 | -2 | -2 | -3 | -2 |
| Process Technology | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS |
| Core Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
关键差异点
- Matches the original -2 timing class (对比 XC6SLX150-3FGG484I)
- Retains the industrial-temperature ordering class (对比 XC6SLX150T-2FGG484C)
- Provides substantial logic density for consolidated control (对比 XC6SLX150-2FGG484I)
- Uses the established 45 nm Spartan-6 LXT process platform (对比 XC6SLX150-2FGG484C)
设计说明
Treat the 484-ball BGA as a multilayer-routing problem rather than a perimeter-lead package. Follow the manufacturer land pattern and escape-via guidance, preserve the ball-map orientation, and provide an uninterrupted reference plane beneath each high-speed interface. The large number of balls requires strict decoupling placement and a stack-up capable of routing the selected I/O standard without excessive loss or crosstalk.
Plan separate core and I/O supply distribution according to the manufacturer requirements, including local ceramic decoupling and adequate plane or rail capacity for activity-dependent demand. Review the programmed design for the highest expected toggle rate rather than assuming an idle average. Validate voltage sequencing, startup behavior, and rail tolerances at the -2 speed grade and across the intended temperature range.
Use the device-specific 484-ball diagram to assign power, ground, configuration, clock, and user I/O balls. Keep configuration-clock routing short and reproducible, provide the required pull-up or pull-down network exactly as specified, and avoid routing user signals through configuration pins. For memory or high-speed serial interfaces, match trace length and maintain a continuous return path beneath the pair.
Do not treat every 484-ball Spartan-6 LXT ordering code as an automatic substitution. The XC6SLX150-2FGG484I, XC6SLX150T-2FGG484C, XC6SLX150-2FGG484C, XC6SLX150-3FGG484I, and XC6SLX150-2FG484I differ in suffix combinations that can represent package, speed, or temperature distinctions. Compare the official ordering guide, ball map, electrical limits, and timing reports before releasing a substitute.
合规信息
No explicit compliance declaration was included in the technical references. The industrial-temperature suffix does not by itself establish AEC-Q100 qualification.