BTS621L1E3128ABUMA1 vs BTS723GWXUMA1 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ BTS621L1E3128ABUMA1 بواسطة Infineon و BTS723GWXUMA1 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Infineon
BTS621L1E3128ABUMA1 - 24V Dual Hi-Side Switch, 8mΩ PROFET | Infineon
BTS621L1E3128ABUMA1 ✓ نشط
مقارنة المواصفات
| المعامل | BTS621L1E3128ABUMA1 | BTS723GWXUMA1 |
|---|---|---|
| العلامة التجارية | Infineon | Infineon |
| الفئة | Power MOSFET Drivers | Power MOSFET Drivers |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Dual-channel smart high-side power switch (PROFET) | Smart High-Side Power Switch |
| Number of Channels | 2 (dual high-side, 1:1) | 2 (dual independent high-side) |
| FET Topology | N-Channel vertical power MOSFET with charge pump | — |
| On-State Resistance Rds(on) | 8 mΩ typical per channel | — |
| Nominal Operating Voltage | 12 V (automotive bus) | — |
| Maximum Supply Voltage | 24 V (load-dump survivable) | — |
| Continuous Load Current | 4.4 A per channel | — |
| نطاق درجة حرارة التشغيل | -40 °C to +150 °C junction | -40 C to +150 C (junction) |
| العلبة | PG-TO263-7-2 (D2PAK-7, exposed tab) | PG-DSO-14-37 (14-pin DSO with exposed thermal pad) |
| نوع التركيب | Surface Mount | Surface Mount |
| Input Logic Compatibility | CMOS-compatible, ground-referenced | CMOS-compatible |
| Diagnostic Feedback | Yes - open-load and overtemperature reporting | — |
| Embedded Protection | Overload, current limit, short-circuit, thermal shutdown, overvoltage (load dump), fast demagnetization, reverse battery | — |
| Technology | Smart SIPMOS (monolithic) | Classic PROFET™ (SMART7 vertical N-channel) |
| RoHS / Lead-Free | Compliant (Pb-free) | — |
| Nominal Operating Voltage (Vbb) | — | 6 V to 24 V |
| Load-Dump Survivability (Vbb(load-dump)) | — | Up to 40 V (per Classic PROFET spec) |
| Continuous Load Current per Channel (I_L(nom)) | — | 2.5 A |
| On-State Resistance per Channel (R_DS(on) typ) | — | [DATA_NEEDED: R_DS(on) at 25 C, full datasheet requires login] |
| Standby Current (I_bb(off)) | — | Very low (a few µA typical) |
| Diagnostic Output | — | Current-mirror status / fault flag (shared) |
| Protection Features | — | Overload, short circuit, ESD, over-temperature, over-voltage (active clamp) |
| Inductive Load Switching | — | Active Zener clamp for fast demagnetization |
| Automotive Qualification | — | AEC-Q100 qualified |
| RoHS Compliance | — | Compliant |