BTS621L1E3128ABUMA1 vs BTS723GWXUMA1 موازنہ
تفصیلی ساتھ ساتھ موازنہ از BTS621L1E3128ABUMA1 بذریعہ Infineon اور BTS723GWXUMA1 بذریعہ Infineon. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
Infineon
BTS621L1E3128ABUMA1 - 24V Dual Hi-Side Switch, 8mΩ PROFET | Infineon
BTS621L1E3128ABUMA1 ✓ فعال
خصوصیات کا موازنہ
| پیرامیٹر | BTS621L1E3128ABUMA1 | BTS723GWXUMA1 |
|---|---|---|
| برانڈ | Infineon | Infineon |
| زمرہ | Power MOSFET Drivers | Power MOSFET Drivers |
| لائف سائیکل کی حالت | فعال | فعال |
| Product Type | Dual-channel smart high-side power switch (PROFET) | Smart High-Side Power Switch |
| Number of Channels | 2 (dual high-side, 1:1) | 2 (dual independent high-side) |
| FET Topology | N-Channel vertical power MOSFET with charge pump | — |
| On-State Resistance Rds(on) | 8 mΩ typical per channel | — |
| Nominal Operating Voltage | 12 V (automotive bus) | — |
| Maximum Supply Voltage | 24 V (load-dump survivable) | — |
| Continuous Load Current | 4.4 A per channel | — |
| آپریٹنگ درجہ حرارت رینج | -40 °C to +150 °C junction | -40 C to +150 C (junction) |
| پیکیج | PG-TO263-7-2 (D2PAK-7, exposed tab) | PG-DSO-14-37 (14-pin DSO with exposed thermal pad) |
| ماؤنٹنگ ٹائپ | Surface Mount | Surface Mount |
| Input Logic Compatibility | CMOS-compatible, ground-referenced | CMOS-compatible |
| Diagnostic Feedback | Yes - open-load and overtemperature reporting | — |
| Embedded Protection | Overload, current limit, short-circuit, thermal shutdown, overvoltage (load dump), fast demagnetization, reverse battery | — |
| Technology | Smart SIPMOS (monolithic) | Classic PROFET™ (SMART7 vertical N-channel) |
| RoHS / Lead-Free | Compliant (Pb-free) | — |
| Nominal Operating Voltage (Vbb) | — | 6 V to 24 V |
| Load-Dump Survivability (Vbb(load-dump)) | — | Up to 40 V (per Classic PROFET spec) |
| Continuous Load Current per Channel (I_L(nom)) | — | 2.5 A |
| On-State Resistance per Channel (R_DS(on) typ) | — | [DATA_NEEDED: R_DS(on) at 25 C, full datasheet requires login] |
| Standby Current (I_bb(off)) | — | Very low (a few µA typical) |
| Diagnostic Output | — | Current-mirror status / fault flag (shared) |
| Protection Features | — | Overload, short circuit, ESD, over-temperature, over-voltage (active clamp) |
| Inductive Load Switching | — | Active Zener clamp for fast demagnetization |
| Automotive Qualification | — | AEC-Q100 qualified |
| RoHS Compliance | — | Compliant |