BTS621L1E3128ABUMA1 vs BTS723GWXUMA1 Perbandingan
Perbandingan bersamaan detil BTS621L1E3128ABUMA1 dari Infineon dan BTS723GWXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Infineon
BTS621L1E3128ABUMA1 - 24V Dual Hi-Side Switch, 8mΩ PROFET | Infineon
BTS621L1E3128ABUMA1 ✓ Aktif
Perbandingan Spesifikasi
| Parameter Umum | BTS621L1E3128ABUMA1 | BTS723GWXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Dual-channel smart high-side power switch (PROFET) | Smart High-Side Power Switch |
| Number of Channels | 2 (dual high-side, 1:1) | 2 (dual independent high-side) |
| FET Topology | N-Channel vertical power MOSFET with charge pump | — |
| On-State Resistance Rds(on) | 8 mΩ typical per channel | — |
| Nominal Operating Voltage | 12 V (automotive bus) | — |
| Maximum Supply Voltage | 24 V (load-dump survivable) | — |
| Continuous Load Current | 4.4 A per channel | — |
| Rentang Suhu Kerja | -40 °C to +150 °C junction | -40 C to +150 C (junction) |
| Paket | PG-TO263-7-2 (D2PAK-7, exposed tab) | PG-DSO-14-37 (14-pin DSO with exposed thermal pad) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Input Logic Compatibility | CMOS-compatible, ground-referenced | CMOS-compatible |
| Diagnostic Feedback | Yes - open-load and overtemperature reporting | — |
| Embedded Protection | Overload, current limit, short-circuit, thermal shutdown, overvoltage (load dump), fast demagnetization, reverse battery | — |
| Technology | Smart SIPMOS (monolithic) | Classic PROFET™ (SMART7 vertical N-channel) |
| RoHS / Lead-Free | Compliant (Pb-free) | — |
| Nominal Operating Voltage (Vbb) | — | 6 V to 24 V |
| Load-Dump Survivability (Vbb(load-dump)) | — | Up to 40 V (per Classic PROFET spec) |
| Continuous Load Current per Channel (I_L(nom)) | — | 2.5 A |
| On-State Resistance per Channel (R_DS(on) typ) | — | [DATA_NEEDED: R_DS(on) at 25 C, full datasheet requires login] |
| Standby Current (I_bb(off)) | — | Very low (a few µA typical) |
| Diagnostic Output | — | Current-mirror status / fault flag (shared) |
| Protection Features | — | Overload, short circuit, ESD, over-temperature, over-voltage (active clamp) |
| Inductive Load Switching | — | Active Zener clamp for fast demagnetization |
| Automotive Qualification | — | AEC-Q100 qualified |
| RoHS Compliance | — | Compliant |