BTS70041EPPXUMA1 vs BTT60302ERAXUMA1 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ BTS70041EPPXUMA1 بواسطة Infineon و BTT60302ERAXUMA1 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Infineon
BTS70041EPPXUMA1 - 15A Smart High-Side Switch, PG-TSDSO-14 | Infineon
BTS70041EPPXUMA1 ✓ نشطمقارنة المواصفات
| المعامل | BTS70041EPPXUMA1 | BTT60302ERAXUMA1 |
|---|---|---|
| العلامة التجارية | Infineon | Infineon |
| الفئة | Power MOSFET Drivers | Power MOSFET Drivers |
| حالة دورة الحياة | نشط | نشط |
| Part Family | HIC-PROFET +2 12V | — |
| Switch Type | High-Side N-Channel Smart Power Switch | 1:1 N-Channel high-side |
| العلبة | PG-TSDSO-14-22 (14-pin) | PG-TDSO-14-31 (14-pin, exposed pad) |
| Typical R_DS(on) | 4 mOhm at 25 °C | — |
| Nominal Load Current | 15 A (DC) | — |
| Operating Voltage Range | [DATA_NEEDED: operating voltage range] | — |
| Load-Dump Robustness | [DATA_NEEDED: load dump rating] | — |
| Input Logic Compatibility | 3.3 V and 5 V CMOS | — |
| Diagnostic Enable Pin (DEN) | Yes | — |
| Current Sense Output (IS) | Yes (analog proportional to load current) | — |
| Embedded Protection | Over-current, short-circuit, over-temperature, reverse battery | — |
| PWM Capability | Yes (low-duty cycle supported via integrated charge pump) | — |
| درجة حرارة التشغيل | -40 °C to +150 °C (junction) | -40 °C to +150 °C junction |
| نوع التركيب | Surface Mount | Surface Mount |
| مستوى MSL | MSL3 (per JEDEC J-STD-020) | — |
| حالة RoHS | Compliant | Compliant |
| Automotive Qualification | AEC-Q100 qualified | AEC-Q100 |
| Product Type | — | Dual-channel Smart High-Side Power Switch |
| Family | — | PROFET+ 24V |
| Number of Channels | — | 2 |
| On-State Resistance (typ, per channel, 25°C) | — | 32 mΩ |
| Continuous Load Current (per channel) | — | 4 A |
| Operating Supply Voltage (Vbb) | — | 8 V to 36 V |
| Load-Dump Tolerance | — | 42 V |
| Process Technology | — | Smart6 (vertical N-MOSFET + charge pump) |
| Diagnostic Output | — | Current sense (IS pin) |
| Protection Features | — | Overcurrent, overtemperature, short-to-ground/battery, ESD, open-load detection |
| Standby Current | — | [DATA_NEEDED: standby current] |