BTS70041EPPXUMA1 vs BTT60302ERAXUMA1 तुलना
विस्तृत दोनों ओर की तुलना BTS70041EPPXUMA1 द्वारा Infineon और BTT60302ERAXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Infineon
BTS70041EPPXUMA1 - 15A Smart High-Side Switch, PG-TSDSO-14 | Infineon
BTS70041EPPXUMA1 ✓ सक्रियविशेषता तुलना
| पैरामीटर | BTS70041EPPXUMA1 | BTT60302ERAXUMA1 |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Power MOSFET Drivers | Power MOSFET Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Part Family | HIC-PROFET +2 12V | — |
| Switch Type | High-Side N-Channel Smart Power Switch | 1:1 N-Channel high-side |
| पैकेज | PG-TSDSO-14-22 (14-pin) | PG-TDSO-14-31 (14-pin, exposed pad) |
| Typical R_DS(on) | 4 mOhm at 25 °C | — |
| Nominal Load Current | 15 A (DC) | — |
| Operating Voltage Range | [DATA_NEEDED: operating voltage range] | — |
| Load-Dump Robustness | [DATA_NEEDED: load dump rating] | — |
| Input Logic Compatibility | 3.3 V and 5 V CMOS | — |
| Diagnostic Enable Pin (DEN) | Yes | — |
| Current Sense Output (IS) | Yes (analog proportional to load current) | — |
| Embedded Protection | Over-current, short-circuit, over-temperature, reverse battery | — |
| PWM Capability | Yes (low-duty cycle supported via integrated charge pump) | — |
| ऑपरेटिंग तापमान | -40 °C to +150 °C (junction) | -40 °C to +150 °C junction |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| MSL स्तर | MSL3 (per JEDEC J-STD-020) | — |
| RoHS स्थिति | Compliant | Compliant |
| Automotive Qualification | AEC-Q100 qualified | AEC-Q100 |
| Product Type | — | Dual-channel Smart High-Side Power Switch |
| Family | — | PROFET+ 24V |
| Number of Channels | — | 2 |
| On-State Resistance (typ, per channel, 25°C) | — | 32 mΩ |
| Continuous Load Current (per channel) | — | 4 A |
| Operating Supply Voltage (Vbb) | — | 8 V to 36 V |
| Load-Dump Tolerance | — | 42 V |
| Process Technology | — | Smart6 (vertical N-MOSFET + charge pump) |
| Diagnostic Output | — | Current sense (IS pin) |
| Protection Features | — | Overcurrent, overtemperature, short-to-ground/battery, ESD, open-load detection |
| Standby Current | — | [DATA_NEEDED: standby current] |