BTS70041EPPXUMA1 vs BTT60302ERAXUMA1 比較

詳細並排比較 BTS70041EPPXUMA1 由 Infineon 與 BTT60302ERAXUMA1 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

規格比較

參數 BTS70041EPPXUMA1 BTT60302ERAXUMA1
品牌 Infineon Infineon
類別 Power MOSFET Drivers Power MOSFET Drivers
生命週期狀態 啟用中 啟用中
Part Family HIC-PROFET +2 12V —
Switch Type High-Side N-Channel Smart Power Switch 1:1 N-Channel high-side
封裝 PG-TSDSO-14-22 (14-pin) PG-TDSO-14-31 (14-pin, exposed pad)
Typical R_DS(on) 4 mOhm at 25 °C —
Nominal Load Current 15 A (DC) —
Operating Voltage Range [DATA_NEEDED: operating voltage range] —
Load-Dump Robustness [DATA_NEEDED: load dump rating] —
Input Logic Compatibility 3.3 V and 5 V CMOS —
Diagnostic Enable Pin (DEN) Yes —
Current Sense Output (IS) Yes (analog proportional to load current) —
Embedded Protection Over-current, short-circuit, over-temperature, reverse battery —
PWM Capability Yes (low-duty cycle supported via integrated charge pump) —
工作溫度 -40 °C to +150 °C (junction) -40 °C to +150 °C junction
安裝類型 Surface Mount Surface Mount
MSL 等級 MSL3 (per JEDEC J-STD-020) —
RoHS 狀態 Compliant Compliant
Automotive Qualification AEC-Q100 qualified AEC-Q100
Product Type — Dual-channel Smart High-Side Power Switch
Family — PROFET+ 24V
Number of Channels — 2
On-State Resistance (typ, per channel, 25°C) — 32 mΩ
Continuous Load Current (per channel) — 4 A
Operating Supply Voltage (Vbb) — 8 V to 36 V
Load-Dump Tolerance — 42 V
Process Technology — Smart6 (vertical N-MOSFET + charge pump)
Diagnostic Output — Current sense (IS pin)
Protection Features — Overcurrent, overtemperature, short-to-ground/battery, ESD, open-load detection
Standby Current — [DATA_NEEDED: standby current]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價