BTS710336ESAXUMA1 vs BTS426L1E3062AAUMA1 مقارنة

مقارنة تفصيلية جنبًا إلى جنب لـ BTS710336ESAXUMA1 بواسطة Infineon و BTS426L1E3062AAUMA1 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.

Infineon
BTS710336ESAXUMA1 BTS710336ESAXUMA1 - 6-Ch SPI High-Side Switch 3A | Infineon

BTS710336ESAXUMA1 - 6-Ch SPI High-Side Switch 3A | Infineon

BTS710336ESAXUMA1 ✓ نشط
Infineon
BTS426L1E3062AAUMA1 BTS426L1E3062AAUMA1 - 7A 12V Smart High-Side Switch | Infineon

BTS426L1E3062AAUMA1 - 7A 12V Smart High-Side Switch | Infineon

BTS426L1E3062AAUMA1 ✓ نشط

مقارنة المواصفات

المعامل BTS710336ESAXUMA1 BTS426L1E3062AAUMA1
العلامة التجارية Infineon Infineon
الفئة Power MOSFET Drivers Power MOSFET Drivers
حالة دورة الحياة نشط نشط
Product Type SPI high-side power switch (SPOC+2 family) —
Number of Channels 6 (4 x 1.5 A + 2 x 3 A) —
On-State Resistance (1.5 A channels) 70 mOhm (typical) —
On-State Resistance (3 A channels) 22.5 mOhm (typical) —
Maximum Channel Current (1.5 A channels) 1.5 A —
Maximum Channel Current (3 A channels) 3 A —
Operating Voltage Range [DATA_NEEDED: Vbb operating range] —
Logic Interface SPI (daisy-chain capable, 3.3 V and 5 V compatible) —
Diagnosis Open-load, short-to-battery, short-to-ground, overtemperature, overload —
Protection Functions Overload, short-circuit, overtemperature, overvoltage —
العلبة PG-TSDSO-24-42 (24-pin TSSOP with exposed pad) PG-TO263-5-2 (DPAK-5, surface mount)
Technology SMART7 (SMART power) Smart SIPMOS, monolithic
نوع التركيب Surface Mount Surface Mount
نطاق درجة حرارة التشغيل -40C to +150C (Tj) -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section]
حالة RoHS Compliant Compliant
Family SPOC+2 —
Manufacturer — Infineon Technologies
Product Family — Classic PROFET 12V
الوظيفة — Smart High-Side Power Switch
البنية الطوبولوجية — N-Channel Vertical Power FET with Charge Pump
عدد المخارج — 1
تكوين الخرج — High-Side
Typical On-State Resistance (RDS(on)) — 5 mΩ
Continuous Load Current — 7 A
Nominal Operating Voltage — 12 V (automotive)
Input Type — CMOS-compatible, ground-referenced
Diagnostic Output — Yes (ST pin, ground-referenced feedback)
Embedded Protections — Overload, Thermal Shutdown, Overvoltage Clamp, ESD
Automotive Qualification — AEC-Q100 (per Classic PROFET 12V family)

أوراق البيانات والموارد

تصفح جميع المنتجات إنشاء BOM طلب عرض سعر