BTS710336ESAXUMA1 vs BTS426L1E3062AAUMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BTS710336ESAXUMA1 disebabkan oleh Infineon dan BTS426L1E3062AAUMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | BTS710336ESAXUMA1 | BTS426L1E3062AAUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | SPI high-side power switch (SPOC+2 family) | — |
| Number of Channels | 6 (4 x 1.5 A + 2 x 3 A) | — |
| On-State Resistance (1.5 A channels) | 70 mOhm (typical) | — |
| On-State Resistance (3 A channels) | 22.5 mOhm (typical) | — |
| Maximum Channel Current (1.5 A channels) | 1.5 A | — |
| Maximum Channel Current (3 A channels) | 3 A | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range] | — |
| Logic Interface | SPI (daisy-chain capable, 3.3 V and 5 V compatible) | — |
| Diagnosis | Open-load, short-to-battery, short-to-ground, overtemperature, overload | — |
| Protection Functions | Overload, short-circuit, overtemperature, overvoltage | — |
| Kemasan | PG-TSDSO-24-42 (24-pin TSSOP with exposed pad) | PG-TO263-5-2 (DPAK-5, surface mount) |
| Technology | SMART7 (SMART power) | Smart SIPMOS, monolithic |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Gambaran Suhu Operasi | -40C to +150C (Tj) | -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section] |
| Status RoHS | Compliant | Compliant |
| Family | SPOC+2 | — |
| Manufacturer | — | Infineon Technologies |
| Product Family | — | Classic PROFET 12V |
| Fungsi | — | Smart High-Side Power Switch |
| Tetstruktur | — | N-Channel Vertical Power FET with Charge Pump |
| Bilangan Output | — | 1 |
| Konfigurasi Output | — | High-Side |
| Typical On-State Resistance (RDS(on)) | — | 5 mΩ |
| Continuous Load Current | — | 7 A |
| Nominal Operating Voltage | — | 12 V (automotive) |
| Input Type | — | CMOS-compatible, ground-referenced |
| Diagnostic Output | — | Yes (ST pin, ground-referenced feedback) |
| Embedded Protections | — | Overload, Thermal Shutdown, Overvoltage Clamp, ESD |
| Automotive Qualification | — | AEC-Q100 (per Classic PROFET 12V family) |