INA122PA vs INA121P مقارنة

مقارنة تفصيلية جنبًا إلى جنب لـ INA122PA بواسطة Texas Instruments و INA121P بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.

مقارنة المواصفات

المعامل INA122PA INA121P
العلامة التجارية Texas Instruments Texas Instruments
الفئة Amplifier ICs Amplifier ICs
حالة دورة الحياة نشط نشط
Amplifier Type Instrumentation amplifier, two-op-amp design Instrumentation Amplifier (3-op-amp topology)
Number of Channels 1 1
Supply Voltage Range (Single Supply) 2.2 V to 36 V —
Supply Voltage Range (Dual Supply) +/-18 V —
تيار السكون 60 uA ±450 µA typical
Input Offset Voltage (max) 250 uV —
Input Offset Drift (max) 3 uV/degC —
Common-Mode Rejection Ratio 90 dB —
Gain Range 5 V/V to 10,000 V/V 1 V/V to 10,000 V/V (single external resistor)
Gain Bandwidth Product 120 kHz —
Input Common-Mode Range (V-) - 0.1 V —
Output Swing Rail-to-rail —
العلبة 8-pin PDIP (P) 8-Pin PDIP (P)
نوع التركيب Through-hole Through-Hole
Supply Type Single or dual supply operation —
Input Noise [DATA_NEEDED: input noise specification] —
Slew Rate [DATA_NEEDED: slew rate specification] [DATA_NEEDED: slew rate from datasheet]
نطاق درجة حرارة التشغيل [DATA_NEEDED: operating temperature range] -40 °C to +85 °C
حالة RoHS [DATA_NEEDED: RoHS status] Compliant
Input Type — FET / CMOS
Input Bias Current — ±4 pA typical
Input Offset Voltage — ±200 µV typical
Input Offset Drift — ±2 µV/°C typical
Input Voltage Noise Density — 20 nV/√Hz at 1 kHz
Common-Mode Rejection Ratio (CMRR) — 106 dB minimum
Bandwidth (-3 dB) — 600 kHz at G = 100
Nonlinearity Error — 0.001% (G = 10)
Supply Voltage Range — ±2.25 V to ±18 V
Input Protection — ±40 V differential and common-mode
Lead-Free Finish — Yes (Matte Tin)

أوراق البيانات والموارد

تصفح جميع المنتجات إنشاء BOM طلب عرض سعر